X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fide%2Fide-taskfile.c;h=aeddbbd69e862e6526ee25d7a83e6143e1c5468f;hb=1bcaaba7749dce7c0506cff0e811c9bed8121f38;hp=b3c32c5fef351072df9bd051a303d3634efa0220;hpb=c0bc113373d94ebd89d0d024421df8aac60ed08a;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index b3c32c5..aeddbbd 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -1,175 +1,136 @@ /* - * linux/drivers/ide/ide-taskfile.c Version 0.38 March 05, 2003 - * - * Copyright (C) 2000-2002 Michael Cornwell - * Copyright (C) 2000-2002 Andre Hedrick - * Copyright (C) 2001-2002 Klaus Smolin + * Copyright (C) 2000-2002 Michael Cornwell + * Copyright (C) 2000-2002 Andre Hedrick + * Copyright (C) 2001-2002 Klaus Smolin * IBM Storage Technology Division - * Copyright (C) 2003-2004 Bartlomiej Zolnierkiewicz + * Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz * * The big the bad and the ugly. - * - * Problems to be fixed because of BH interface or the lack therefore. - * - * Fill me in stupid !!! - * - * HOST: - * General refers to the Controller and Driver "pair". - * DATA HANDLER: - * Under the context of Linux it generally refers to an interrupt handler. - * However, it correctly describes the 'HOST' - * DATA BLOCK: - * The amount of data needed to be transfered as predefined in the - * setup of the device. - * STORAGE ATOMIC: - * The 'DATA BLOCK' associated to the 'DATA HANDLER', and can be as - * small as a single sector or as large as the entire command block - * request. */ -#include -#include #include #include #include -#include -#include +#include #include -#include #include -#include -#include #include -#include #include #include #include -#include +#include -#include -#include #include #include -static void ata_bswap_data (void *buffer, int wcount) -{ - u16 *p = buffer; - - while (wcount--) { - *p = *p << 8 | *p >> 8; p++; - *p = *p << 8 | *p >> 8; p++; - } -} - -static void taskfile_input_data(ide_drive_t *drive, void *buffer, u32 wcount) -{ - HWIF(drive)->ata_input_data(drive, buffer, wcount); - if (drive->bswap) - ata_bswap_data(buffer, wcount); -} - -static void taskfile_output_data(ide_drive_t *drive, void *buffer, u32 wcount) +void ide_tf_dump(const char *s, struct ide_taskfile *tf) { - if (drive->bswap) { - ata_bswap_data(buffer, wcount); - HWIF(drive)->ata_output_data(drive, buffer, wcount); - ata_bswap_data(buffer, wcount); - } else { - HWIF(drive)->ata_output_data(drive, buffer, wcount); - } +#ifdef DEBUG + printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " + "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", + s, tf->feature, tf->nsect, tf->lbal, + tf->lbam, tf->lbah, tf->device, tf->command); + printk("%s: hob: nsect 0x%02x lbal 0x%02x " + "lbam 0x%02x lbah 0x%02x\n", + s, tf->hob_nsect, tf->hob_lbal, + tf->hob_lbam, tf->hob_lbah); +#endif } int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) { ide_task_t args; + memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01; + args.tf.nsect = 0x01; if (drive->media == ide_disk) - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_IDENTIFY; + args.tf.command = WIN_IDENTIFY; else - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_PIDENTIFY; - args.command_type = IDE_DRIVE_TASK_IN; - args.data_phase = TASKFILE_IN; - args.handler = &task_in_intr; - return ide_raw_taskfile(drive, &args, buf); + args.tf.command = WIN_PIDENTIFY; + args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + args.data_phase = TASKFILE_IN; + return ide_raw_taskfile(drive, &args, buf, 1); } +static ide_startstop_t task_no_data_intr(ide_drive_t *); +static ide_startstop_t set_geometry_intr(ide_drive_t *); +static ide_startstop_t recal_intr(ide_drive_t *); +static ide_startstop_t set_multmode_intr(ide_drive_t *); +static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); +static ide_startstop_t task_in_intr(ide_drive_t *); + ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = HWIF(drive); - task_struct_t *taskfile = (task_struct_t *) task->tfRegister; - hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister; - u8 HIHI = (drive->addressing == 1) ? 0xE0 : 0xEF; - - /* ALL Command Block Executions SHALL clear nIEN, unless otherwise */ - if (IDE_CONTROL_REG) { - /* clear nIEN */ - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - } - SELECT_MASK(drive, 0); - - if (drive->addressing == 1) { - hwif->OUTB(hobfile->feature, IDE_FEATURE_REG); - hwif->OUTB(hobfile->sector_count, IDE_NSECTOR_REG); - hwif->OUTB(hobfile->sector_number, IDE_SECTOR_REG); - hwif->OUTB(hobfile->low_cylinder, IDE_LCYL_REG); - hwif->OUTB(hobfile->high_cylinder, IDE_HCYL_REG); - } - - hwif->OUTB(taskfile->feature, IDE_FEATURE_REG); - hwif->OUTB(taskfile->sector_count, IDE_NSECTOR_REG); - hwif->OUTB(taskfile->sector_number, IDE_SECTOR_REG); - hwif->OUTB(taskfile->low_cylinder, IDE_LCYL_REG); - hwif->OUTB(taskfile->high_cylinder, IDE_HCYL_REG); - - hwif->OUTB((taskfile->device_head & HIHI) | drive->select.all, IDE_SELECT_REG); - - if (task->handler != NULL) { - if (task->prehandler != NULL) { - hwif->OUTBSYNC(drive, taskfile->command, IDE_COMMAND_REG); - ndelay(400); /* FIXME */ - return task->prehandler(drive, task->rq); + struct ide_taskfile *tf = &task->tf; + ide_handler_t *handler = NULL; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + const struct ide_dma_ops *dma_ops = hwif->dma_ops; + + if (task->data_phase == TASKFILE_MULTI_IN || + task->data_phase == TASKFILE_MULTI_OUT) { + if (!drive->mult_count) { + printk(KERN_ERR "%s: multimode not set!\n", + drive->name); + return ide_stopped; } - ide_execute_command(drive, taskfile->command, task->handler, WAIT_WORSTCASE, NULL); - return ide_started; } - if (!drive->using_dma) - return ide_stopped; + if (task->tf_flags & IDE_TFLAG_FLAGGED) + task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; - switch (taskfile->command) { - case WIN_WRITEDMA_ONCE: - case WIN_WRITEDMA: - case WIN_WRITEDMA_EXT: - case WIN_READDMA_ONCE: - case WIN_READDMA: - case WIN_READDMA_EXT: - case WIN_IDENTIFY_DMA: - if (!hwif->dma_setup(drive)) { - hwif->dma_exec_cmd(drive, taskfile->command); - hwif->dma_start(drive); - return ide_started; - } - break; - default: - if (task->handler == NULL) - return ide_stopped; + if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { + ide_tf_dump(drive->name, tf); + tp_ops->set_irq(hwif, 1); + SELECT_MASK(drive, 0); + tp_ops->tf_load(drive, task); } - return ide_stopped; + switch (task->data_phase) { + case TASKFILE_MULTI_OUT: + case TASKFILE_OUT: + tp_ops->exec_command(hwif, tf->command); + ndelay(400); /* FIXME */ + return pre_task_out_intr(drive, task->rq); + case TASKFILE_MULTI_IN: + case TASKFILE_IN: + handler = task_in_intr; + /* fall-through */ + case TASKFILE_NO_DATA: + if (handler == NULL) + handler = task_no_data_intr; + /* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */ + if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) { + switch (tf->command) { + case WIN_SPECIFY: handler = set_geometry_intr; break; + case WIN_RESTORE: handler = recal_intr; break; + case WIN_SETMULT: handler = set_multmode_intr; break; + } + } + ide_execute_command(drive, tf->command, handler, + WAIT_WORSTCASE, NULL); + return ide_started; + default: + if (drive->using_dma == 0 || dma_ops->dma_setup(drive)) + return ide_stopped; + dma_ops->dma_exec_cmd(drive, tf->command); + dma_ops->dma_start(drive); + return ide_started; + } } +EXPORT_SYMBOL_GPL(do_rw_taskfile); /* * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. */ -ide_startstop_t set_multmode_intr (ide_drive_t *drive) +static ide_startstop_t set_multmode_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - u8 stat; + ide_hwif_t *hwif = drive->hwif; + u8 stat = hwif->tp_ops->read_status(hwif); - if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) { + if (OK_STAT(stat, READY_STAT, BAD_STAT)) drive->mult_count = drive->mult_req; - } else { + else { drive->mult_req = drive->mult_count = 0; drive->special.b.recalibrate = 1; (void) ide_dump_status(drive, "set_multmode", stat); @@ -180,14 +141,18 @@ ide_startstop_t set_multmode_intr (ide_drive_t *drive) /* * set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd. */ -ide_startstop_t set_geometry_intr (ide_drive_t *drive) +static ide_startstop_t set_geometry_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *hwif = drive->hwif; int retries = 5; u8 stat; - while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) + while (1) { + stat = hwif->tp_ops->read_status(hwif); + if ((stat & BUSY_STAT) == 0 || retries-- == 0) + break; udelay(10); + }; if (OK_STAT(stat, READY_STAT, BAD_STAT)) return ide_stopped; @@ -195,8 +160,6 @@ ide_startstop_t set_geometry_intr (ide_drive_t *drive) if (stat & (ERR_STAT|DRQ_STAT)) return ide_error(drive, "set_geometry_intr", stat); - if (HWGROUP(drive)->handler != NULL) - BUG(); ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); return ide_started; } @@ -204,12 +167,12 @@ ide_startstop_t set_geometry_intr (ide_drive_t *drive) /* * recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd. */ -ide_startstop_t recal_intr (ide_drive_t *drive) +static ide_startstop_t recal_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - u8 stat; + ide_hwif_t *hwif = drive->hwif; + u8 stat = hwif->tp_ops->read_status(hwif); - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG), READY_STAT, BAD_STAT)) + if (!OK_STAT(stat, READY_STAT, BAD_STAT)) return ide_error(drive, "recal_intr", stat); return ide_stopped; } @@ -217,49 +180,56 @@ ide_startstop_t recal_intr (ide_drive_t *drive) /* * Handler for commands without a data phase */ -ide_startstop_t task_no_data_intr (ide_drive_t *drive) +static ide_startstop_t task_no_data_intr(ide_drive_t *drive) { - ide_task_t *args = HWGROUP(drive)->rq->special; - ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *hwif = drive->hwif; + ide_task_t *args = hwif->hwgroup->rq->special; u8 stat; - local_irq_enable(); - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) { + local_irq_enable_in_hardirq(); + stat = hwif->tp_ops->read_status(hwif); + + if (!OK_STAT(stat, READY_STAT, BAD_STAT)) return ide_error(drive, "task_no_data_intr", stat); /* calls ide_end_drive_cmd */ - } + if (args) - ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG)); + ide_end_drive_cmd(drive, stat, ide_read_error(drive)); return ide_stopped; } -EXPORT_SYMBOL(task_no_data_intr); - static u8 wait_drive_not_busy(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - int retries = 100; + ide_hwif_t *hwif = drive->hwif; + int retries; u8 stat; /* - * Last sector was transfered, wait until drive is ready. - * This can take up to 10 usec, but we will wait max 1 ms - * (drive_cmd_intr() waits that long). + * Last sector was transfered, wait until device is ready. This can + * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ - while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) - udelay(10); + for (retries = 0; retries < 1000; retries++) { + stat = hwif->tp_ops->read_status(hwif); - if (!retries) + if (stat & BUSY_STAT) + udelay(10); + else + break; + } + + if (stat & BUSY_STAT) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; } -static void ide_pio_sector(ide_drive_t *drive, unsigned int write) +static void ide_pio_sector(ide_drive_t *drive, struct request *rq, + unsigned int write) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; + struct scatterlist *cursg = hwif->cursg; struct page *page; #ifdef CONFIG_HIGHMEM unsigned long flags; @@ -267,8 +237,14 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write) unsigned int offset; u8 *buf; - page = sg[hwif->cursg].page; - offset = sg[hwif->cursg].offset + hwif->cursg_ofs * SECTOR_SIZE; + cursg = hwif->cursg; + if (!cursg) { + cursg = sg; + hwif->cursg = sg; + } + + page = sg_page(cursg); + offset = cursg->offset + hwif->cursg_ofs * SECTOR_SIZE; /* get the current page and offset */ page = nth_page(page, (offset >> PAGE_SHIFT)); @@ -282,16 +258,16 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write) hwif->nleft--; hwif->cursg_ofs++; - if ((hwif->cursg_ofs * SECTOR_SIZE) == sg[hwif->cursg].length) { - hwif->cursg++; + if ((hwif->cursg_ofs * SECTOR_SIZE) == cursg->length) { + hwif->cursg = sg_next(hwif->cursg); hwif->cursg_ofs = 0; } /* do the actual data transfer */ if (write) - taskfile_output_data(drive, buf, SECTOR_WORDS); + hwif->tp_ops->output_data(drive, rq, buf, SECTOR_SIZE); else - taskfile_input_data(drive, buf, SECTOR_WORDS); + hwif->tp_ops->input_data(drive, rq, buf, SECTOR_SIZE); kunmap_atomic(buf, KM_BIO_SRC_IRQ); #ifdef CONFIG_HIGHMEM @@ -299,30 +275,44 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write) #endif } -static void ide_pio_multi(ide_drive_t *drive, unsigned int write) +static void ide_pio_multi(ide_drive_t *drive, struct request *rq, + unsigned int write) { unsigned int nsect; nsect = min_t(unsigned int, drive->hwif->nleft, drive->mult_count); while (nsect--) - ide_pio_sector(drive, write); + ide_pio_sector(drive, rq, write); } -static inline void ide_pio_datablock(ide_drive_t *drive, struct request *rq, +static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, unsigned int write) { + u8 saved_io_32bit = drive->io_32bit; + if (rq->bio) /* fs request */ rq->errors = 0; + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { + ide_task_t *task = rq->special; + + if (task->tf_flags & IDE_TFLAG_IO_16BIT) + drive->io_32bit = 0; + } + + touch_softlockup_watchdog(); + switch (drive->hwif->data_phase) { case TASKFILE_MULTI_IN: case TASKFILE_MULTI_OUT: - ide_pio_multi(drive, write); + ide_pio_multi(drive, rq, write); break; default: - ide_pio_sector(drive, write); + ide_pio_sector(drive, rq, write); break; } + + drive->io_32bit = saved_io_32bit; } static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, @@ -360,46 +350,67 @@ static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, return ide_error(drive, s, stat); } -static void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) +void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) { - if (rq->flags & REQ_DRIVE_TASKFILE) { - ide_task_t *task = rq->special; + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { + u8 err = ide_read_error(drive); - if (task->tf_out_flags.all) { - u8 err = drive->hwif->INB(IDE_ERROR_REG); - ide_end_drive_cmd(drive, stat, err); - return; - } + ide_end_drive_cmd(drive, stat, err); + return; + } + + if (rq->rq_disk) { + ide_driver_t *drv; + + drv = *(ide_driver_t **)rq->rq_disk->private_data;; + drv->end_request(drive, 1, rq->nr_sectors); + } else + ide_end_request(drive, 1, rq->nr_sectors); +} + +/* + * We got an interrupt on a task_in case, but no errors and no DRQ. + * + * It might be a spurious irq (shared irq), but it might be a + * command that had no output. + */ +static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat) +{ + /* Command all done? */ + if (OK_STAT(stat, READY_STAT, BUSY_STAT)) { + task_end_request(drive, rq, stat); + return ide_stopped; } - ide_end_request(drive, 1, rq->hard_nr_sectors); + /* Assume it was a spurious irq */ + ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); + return ide_started; } /* * Handler for command with PIO data-in phase (Read/Read Multiple). */ -ide_startstop_t task_in_intr (ide_drive_t *drive) +static ide_startstop_t task_in_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - struct request *rq = HWGROUP(drive)->rq; - u8 stat = hwif->INB(IDE_STATUS_REG); - - /* new way for dealing with premature shared PCI interrupts */ - if (!OK_STAT(stat, DATA_READY, BAD_R_STAT)) { - if (stat & (ERR_STAT | DRQ_STAT)) - return task_error(drive, rq, __FUNCTION__, stat); - /* No data yet, so wait for another IRQ. */ - ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); - return ide_started; - } + struct request *rq = hwif->hwgroup->rq; + u8 stat = hwif->tp_ops->read_status(hwif); + + /* Error? */ + if (stat & ERR_STAT) + return task_error(drive, rq, __func__, stat); + + /* Didn't want any data? Odd. */ + if (!(stat & DRQ_STAT)) + return task_in_unexpected(drive, rq, stat); ide_pio_datablock(drive, rq, 0); - /* If it was the last datablock check status and finish transfer. */ + /* Are we done? Check status and finish transfer. */ if (!hwif->nleft) { stat = wait_drive_not_busy(drive); - if (!OK_STAT(stat, 0, BAD_R_STAT)) - return task_error(drive, rq, __FUNCTION__, stat); + if (!OK_STAT(stat, 0, BAD_STAT)) + return task_error(drive, rq, __func__, stat); task_end_request(drive, rq, stat); return ide_stopped; } @@ -409,7 +420,6 @@ ide_startstop_t task_in_intr (ide_drive_t *drive) return ide_started; } -EXPORT_SYMBOL(task_in_intr); /* * Handler for command with PIO data-out phase (Write/Write Multiple). @@ -418,14 +428,14 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct request *rq = HWGROUP(drive)->rq; - u8 stat = hwif->INB(IDE_STATUS_REG); + u8 stat = hwif->tp_ops->read_status(hwif); if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); /* Deal with unexpected ATA data phase. */ if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); if (!hwif->nleft) { task_end_request(drive, rq, stat); @@ -439,11 +449,11 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive) return ide_started; } -ide_startstop_t pre_task_out_intr (ide_drive_t *drive, struct request *rq) +static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) { ide_startstop_t startstop; - if (ide_wait_stat(&startstop, drive, DATA_READY, + if (ide_wait_stat(&startstop, drive, DRQ_STAT, drive->bad_wstat, WAIT_DRQ)) { printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", drive->name, @@ -460,15 +470,15 @@ ide_startstop_t pre_task_out_intr (ide_drive_t *drive, struct request *rq) return ide_started; } -EXPORT_SYMBOL(pre_task_out_intr); -static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long data_size, u8 *buf) +int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) { - struct request rq; + struct request *rq; + int error; - memset(&rq, 0, sizeof(rq)); - rq.flags = REQ_DRIVE_TASKFILE; - rq.buffer = buf; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; + rq->buffer = buf; /* * (ks) We transfer currently only whole sectors. @@ -476,50 +486,44 @@ static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - if (args->command_type != IDE_DRIVE_TASK_NO_DATA) { - if (data_size == 0) - rq.nr_sectors = (args->hobRegister[IDE_NSECTOR_OFFSET] << 8) | args->tfRegister[IDE_NSECTOR_OFFSET]; - else - rq.nr_sectors = data_size / SECTOR_SIZE; + rq->hard_nr_sectors = rq->nr_sectors = nsect; + rq->hard_cur_sectors = rq->current_nr_sectors = nsect; - if (!rq.nr_sectors) { - printk(KERN_ERR "%s: in/out command without data\n", - drive->name); - return -EFAULT; - } + if (task->tf_flags & IDE_TFLAG_WRITE) + rq->cmd_flags |= REQ_RW; - rq.hard_nr_sectors = rq.nr_sectors; - rq.hard_cur_sectors = rq.current_nr_sectors = rq.nr_sectors; + rq->special = task; + task->rq = rq; - if (args->command_type == IDE_DRIVE_TASK_RAW_WRITE) - rq.flags |= REQ_RW; - } + error = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); - rq.special = args; - args->rq = &rq; - return ide_do_drive_cmd(drive, &rq, ide_wait); + return error; } -int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *args, u8 *buf) +EXPORT_SYMBOL(ide_raw_taskfile); + +int ide_no_data_taskfile(ide_drive_t *drive, ide_task_t *task) { - return ide_diag_taskfile(drive, args, 0, buf); -} + task->data_phase = TASKFILE_NO_DATA; -EXPORT_SYMBOL(ide_raw_taskfile); + return ide_raw_taskfile(drive, task, NULL, 0); +} +EXPORT_SYMBOL_GPL(ide_no_data_taskfile); +#ifdef CONFIG_IDE_TASK_IOCTL int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) { ide_task_request_t *req_task; ide_task_t args; u8 *outbuf = NULL; u8 *inbuf = NULL; - task_ioreg_t *argsptr = args.tfRegister; - task_ioreg_t *hobsptr = args.hobRegister; + u8 *data_buf = NULL; int err = 0; int tasksize = sizeof(struct ide_task_request_s); - int taskin = 0; - int taskout = 0; - u8 io_32bit = drive->io_32bit; + unsigned int taskin = 0; + unsigned int taskout = 0; + u16 nsect = 0; char __user *buf = (char __user *)arg; // printk("IDE Taskfile ...\n"); @@ -531,8 +535,13 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) return -EFAULT; } - taskout = (int) req_task->out_size; - taskin = (int) req_task->in_size; + taskout = req_task->out_size; + taskin = req_task->in_size; + + if (taskin > 65536 || taskout > 65536) { + err = -EINVAL; + goto abort; + } if (taskout) { int outtotal = tasksize; @@ -561,66 +570,120 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) } memset(&args, 0, sizeof(ide_task_t)); - memcpy(argsptr, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); - memcpy(hobsptr, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE); - args.tf_in_flags = req_task->in_flags; - args.tf_out_flags = req_task->out_flags; - args.data_phase = req_task->data_phase; - args.command_type = req_task->req_cmd; + memcpy(&args.tf_array[0], req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); + + args.data_phase = req_task->data_phase; + + args.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | + IDE_TFLAG_IN_TF; + if (drive->addressing == 1) + args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); + + if (req_task->out_flags.all) { + args.tf_flags |= IDE_TFLAG_FLAGGED; + + if (req_task->out_flags.b.data) + args.tf_flags |= IDE_TFLAG_OUT_DATA; + + if (req_task->out_flags.b.nsector_hob) + args.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT; + if (req_task->out_flags.b.sector_hob) + args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL; + if (req_task->out_flags.b.lcyl_hob) + args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM; + if (req_task->out_flags.b.hcyl_hob) + args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH; + + if (req_task->out_flags.b.error_feature) + args.tf_flags |= IDE_TFLAG_OUT_FEATURE; + if (req_task->out_flags.b.nsector) + args.tf_flags |= IDE_TFLAG_OUT_NSECT; + if (req_task->out_flags.b.sector) + args.tf_flags |= IDE_TFLAG_OUT_LBAL; + if (req_task->out_flags.b.lcyl) + args.tf_flags |= IDE_TFLAG_OUT_LBAM; + if (req_task->out_flags.b.hcyl) + args.tf_flags |= IDE_TFLAG_OUT_LBAH; + } else { + args.tf_flags |= IDE_TFLAG_OUT_TF; + if (args.tf_flags & IDE_TFLAG_LBA48) + args.tf_flags |= IDE_TFLAG_OUT_HOB; + } + + if (req_task->in_flags.b.data) + args.tf_flags |= IDE_TFLAG_IN_DATA; - drive->io_32bit = 0; switch(req_task->data_phase) { - case TASKFILE_OUT_DMAQ: - case TASKFILE_OUT_DMA: - err = ide_diag_taskfile(drive, &args, taskout, outbuf); - break; - case TASKFILE_IN_DMAQ: - case TASKFILE_IN_DMA: - err = ide_diag_taskfile(drive, &args, taskin, inbuf); - break; case TASKFILE_MULTI_OUT: if (!drive->mult_count) { /* (hs): give up if multcount is not set */ printk(KERN_ERR "%s: %s Multimode Write " \ "multcount is not set\n", - drive->name, __FUNCTION__); + drive->name, __func__); err = -EPERM; goto abort; } /* fall through */ case TASKFILE_OUT: - args.prehandler = &pre_task_out_intr; - args.handler = &task_out_intr; - err = ide_diag_taskfile(drive, &args, taskout, outbuf); + /* fall through */ + case TASKFILE_OUT_DMAQ: + case TASKFILE_OUT_DMA: + nsect = taskout / SECTOR_SIZE; + data_buf = outbuf; break; case TASKFILE_MULTI_IN: if (!drive->mult_count) { /* (hs): give up if multcount is not set */ printk(KERN_ERR "%s: %s Multimode Read failure " \ "multcount is not set\n", - drive->name, __FUNCTION__); + drive->name, __func__); err = -EPERM; goto abort; } /* fall through */ case TASKFILE_IN: - args.handler = &task_in_intr; - err = ide_diag_taskfile(drive, &args, taskin, inbuf); + /* fall through */ + case TASKFILE_IN_DMAQ: + case TASKFILE_IN_DMA: + nsect = taskin / SECTOR_SIZE; + data_buf = inbuf; break; case TASKFILE_NO_DATA: - args.handler = &task_no_data_intr; - err = ide_diag_taskfile(drive, &args, 0, NULL); break; default: err = -EFAULT; goto abort; } - memcpy(req_task->io_ports, &(args.tfRegister), HDIO_DRIVE_TASK_HDR_SIZE); - memcpy(req_task->hob_ports, &(args.hobRegister), HDIO_DRIVE_HOB_HDR_SIZE); - req_task->in_flags = args.tf_in_flags; - req_task->out_flags = args.tf_out_flags; + if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) + nsect = 0; + else if (!nsect) { + nsect = (args.tf.hob_nsect << 8) | args.tf.nsect; + + if (!nsect) { + printk(KERN_ERR "%s: in/out command without data\n", + drive->name); + err = -EFAULT; + goto abort; + } + } + + if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) + args.tf_flags |= IDE_TFLAG_WRITE; + + err = ide_raw_taskfile(drive, &args, data_buf, nsect); + + memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE); + + if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) && + req_task->in_flags.all == 0) { + req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; + if (drive->addressing == 1) + req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); + } if (copy_to_user(buf, req_task, tasksize)) { err = -EFAULT; @@ -647,70 +710,74 @@ abort: // printk("IDE Taskfile ioctl ended. rc = %i\n", err); - drive->io_32bit = io_32bit; - return err; } +#endif -int ide_wait_cmd (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf) -{ - struct request rq; - u8 buffer[4]; - - if (!buf) - buf = buffer; - memset(buf, 0, 4 + SECTOR_WORDS * 4 * sectors); - ide_init_drive_cmd(&rq); - rq.buffer = buf; - *buf++ = cmd; - *buf++ = nsect; - *buf++ = feature; - *buf++ = sectors; - return ide_do_drive_cmd(drive, &rq, ide_wait); -} - -/* - * FIXME : this needs to map into at taskfile. - */ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) { - int err = 0; - u8 args[4], *argbuf = args; - u8 xfer_rate = 0; - int argsize = 4; + u8 *buf = NULL; + int bufsize = 0, err = 0; + u8 args[4], xfer_rate = 0; ide_task_t tfargs; + struct ide_taskfile *tf = &tfargs.tf; + struct hd_driveid *id = drive->id; if (NULL == (void *) arg) { - struct request rq; - ide_init_drive_cmd(&rq); - return ide_do_drive_cmd(drive, &rq, ide_wait); + struct request *rq; + + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; + err = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); + + return err; } if (copy_from_user(args, (void __user *)arg, 4)) return -EFAULT; memset(&tfargs, 0, sizeof(ide_task_t)); - tfargs.tfRegister[IDE_FEATURE_OFFSET] = args[2]; - tfargs.tfRegister[IDE_NSECTOR_OFFSET] = args[3]; - tfargs.tfRegister[IDE_SECTOR_OFFSET] = args[1]; - tfargs.tfRegister[IDE_LCYL_OFFSET] = 0x00; - tfargs.tfRegister[IDE_HCYL_OFFSET] = 0x00; - tfargs.tfRegister[IDE_SELECT_OFFSET] = 0x00; - tfargs.tfRegister[IDE_COMMAND_OFFSET] = args[0]; + tf->feature = args[2]; + if (args[0] == WIN_SMART) { + tf->nsect = args[3]; + tf->lbal = args[1]; + tf->lbam = 0x4f; + tf->lbah = 0xc2; + tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; + } else { + tf->nsect = args[1]; + tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE | + IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT; + } + tf->command = args[0]; + tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA; if (args[3]) { - argsize = 4 + (SECTOR_WORDS * 4 * args[3]); - argbuf = kzalloc(argsize, GFP_KERNEL); - if (argbuf == NULL) + tfargs.tf_flags |= IDE_TFLAG_IO_16BIT; + bufsize = SECTOR_WORDS * 4 * args[3]; + buf = kzalloc(bufsize, GFP_KERNEL); + if (buf == NULL) return -ENOMEM; } - if (set_transfer(drive, &tfargs)) { + + if (tf->command == WIN_SETFEATURES && + tf->feature == SETFEATURES_XFER && + tf->nsect >= XFER_SW_DMA_0 && + (id->dma_ultra || id->dma_mword || id->dma_1word)) { xfer_rate = args[1]; - if (ide_ata66_check(drive, &tfargs)) + if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) { + printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " + "be set\n", drive->name); goto abort; + } } - err = ide_wait_cmd(drive, args[0], args[1], args[2], args[3], argbuf); + err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); + + args[0] = tf->status; + args[1] = tf->error; + args[2] = tf->nsect; if (!err && xfer_rate) { /* active-retuning-calls future */ @@ -718,145 +785,38 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) ide_driveid_update(drive); } abort: - if (copy_to_user((void __user *)arg, argbuf, argsize)) + if (copy_to_user((void __user *)arg, &args, 4)) err = -EFAULT; - if (argsize > 4) - kfree(argbuf); + if (buf) { + if (copy_to_user((void __user *)(arg + 4), buf, bufsize)) + err = -EFAULT; + kfree(buf); + } return err; } -static int ide_wait_cmd_task(ide_drive_t *drive, u8 *buf) -{ - struct request rq; - - ide_init_drive_cmd(&rq); - rq.flags = REQ_DRIVE_TASK; - rq.buffer = buf; - return ide_do_drive_cmd(drive, &rq, ide_wait); -} - -/* - * FIXME : this needs to map into at taskfile. - */ int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) { void __user *p = (void __user *)arg; int err = 0; - u8 args[7], *argbuf = args; - int argsize = 7; + u8 args[7]; + ide_task_t task; if (copy_from_user(args, p, 7)) return -EFAULT; - err = ide_wait_cmd_task(drive, argbuf); - if (copy_to_user(p, argbuf, argsize)) - err = -EFAULT; - return err; -} -/* - * NOTICE: This is additions from IBM to provide a discrete interface, - * for selective taskregister access operations. Nice JOB Klaus!!! - * Glad to be able to work and co-develop this with you and IBM. - */ -ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = HWIF(drive); - task_struct_t *taskfile = (task_struct_t *) task->tfRegister; - hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister; + memset(&task, 0, sizeof(task)); + memcpy(&task.tf_array[7], &args[1], 6); + task.tf.command = args[0]; + task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (task->data_phase == TASKFILE_MULTI_IN || - task->data_phase == TASKFILE_MULTI_OUT) { - if (!drive->mult_count) { - printk(KERN_ERR "%s: multimode not set!\n", drive->name); - return ide_stopped; - } - } - - /* - * (ks) Check taskfile in/out flags. - * If set, then execute as it is defined. - * If not set, then define default settings. - * The default values are: - * write and read all taskfile registers (except data) - * write and read the hob registers (sector,nsector,lcyl,hcyl) - */ - if (task->tf_out_flags.all == 0) { - task->tf_out_flags.all = IDE_TASKFILE_STD_OUT_FLAGS; - if (drive->addressing == 1) - task->tf_out_flags.all |= (IDE_HOB_STD_OUT_FLAGS << 8); - } - - if (task->tf_in_flags.all == 0) { - task->tf_in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; - if (drive->addressing == 1) - task->tf_in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); - } - - /* ALL Command Block Executions SHALL clear nIEN, unless otherwise */ - if (IDE_CONTROL_REG) - /* clear nIEN */ - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - SELECT_MASK(drive, 0); - - if (task->tf_out_flags.b.data) { - u16 data = taskfile->data + (hobfile->data << 8); - hwif->OUTW(data, IDE_DATA_REG); - } - - /* (ks) send hob registers first */ - if (task->tf_out_flags.b.nsector_hob) - hwif->OUTB(hobfile->sector_count, IDE_NSECTOR_REG); - if (task->tf_out_flags.b.sector_hob) - hwif->OUTB(hobfile->sector_number, IDE_SECTOR_REG); - if (task->tf_out_flags.b.lcyl_hob) - hwif->OUTB(hobfile->low_cylinder, IDE_LCYL_REG); - if (task->tf_out_flags.b.hcyl_hob) - hwif->OUTB(hobfile->high_cylinder, IDE_HCYL_REG); - - /* (ks) Send now the standard registers */ - if (task->tf_out_flags.b.error_feature) - hwif->OUTB(taskfile->feature, IDE_FEATURE_REG); - /* refers to number of sectors to transfer */ - if (task->tf_out_flags.b.nsector) - hwif->OUTB(taskfile->sector_count, IDE_NSECTOR_REG); - /* refers to sector offset or start sector */ - if (task->tf_out_flags.b.sector) - hwif->OUTB(taskfile->sector_number, IDE_SECTOR_REG); - if (task->tf_out_flags.b.lcyl) - hwif->OUTB(taskfile->low_cylinder, IDE_LCYL_REG); - if (task->tf_out_flags.b.hcyl) - hwif->OUTB(taskfile->high_cylinder, IDE_HCYL_REG); - - /* - * (ks) In the flagged taskfile approch, we will use all specified - * registers and the register value will not be changed, except the - * select bit (master/slave) in the drive_head register. We must make - * sure that the desired drive is selected. - */ - hwif->OUTB(taskfile->device_head | drive->select.all, IDE_SELECT_REG); - switch(task->data_phase) { - - case TASKFILE_OUT_DMAQ: - case TASKFILE_OUT_DMA: - case TASKFILE_IN_DMAQ: - case TASKFILE_IN_DMA: - hwif->dma_setup(drive); - hwif->dma_exec_cmd(drive, taskfile->command); - hwif->dma_start(drive); - break; + err = ide_no_data_taskfile(drive, &task); - default: - if (task->handler == NULL) - return ide_stopped; + args[0] = task.tf.command; + memcpy(&args[1], &task.tf_array[7], 6); - /* Issue the command */ - if (task->prehandler) { - hwif->OUTBSYNC(drive, taskfile->command, IDE_COMMAND_REG); - ndelay(400); /* FIXME */ - return task->prehandler(drive, task->rq); - } - ide_execute_command(drive, taskfile->command, task->handler, WAIT_WORSTCASE, NULL); - } + if (copy_to_user(p, args, 7)) + err = -EFAULT; - return ide_started; + return err; }