X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fide%2Fide-iops.c;h=222c1ef65fb94f0dbc84e18d64b04feb9cba1285;hb=293f18ad720f7c10f9f4b8a87827a1f0989e19ee;hp=dfb0ec317fa30d03e9e41a817eaf398bb6a86962;hpb=abb596b25edac1ec1acc4ef53df190771661c3d2;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index dfb0ec3..222c1ef 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -27,11 +27,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-void SELECT_DRIVE(ide_drive_t *drive)
-{
-	drive->hwif->tp_ops->dev_select(drive);
-}
-
 void SELECT_MASK(ide_drive_t *drive, int mask)
 {
 	const struct ide_port_ops *port_ops = drive->hwif->port_ops;
@@ -42,14 +37,11 @@ void SELECT_MASK(ide_drive_t *drive, int mask)
 
 u8 ide_read_error(ide_drive_t *drive)
 {
-	struct ide_cmd cmd;
+	struct ide_taskfile tf;
 
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.tf_flags = IDE_TFLAG_IN_ERROR;
+	drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_ERROR);
 
-	drive->hwif->tp_ops->tf_read(drive, &cmd);
-
-	return cmd.tf.error;
+	return tf.error;
 }
 EXPORT_SYMBOL_GPL(ide_read_error);
 
@@ -110,8 +102,8 @@ EXPORT_SYMBOL(ide_fixstring);
  * setting a timer to wake up at half second intervals thereafter,
  * until timeout is achieved, before timing out.
  */
-static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad,
-			   unsigned long timeout, u8 *rstat)
+int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad,
+		    unsigned long timeout, u8 *rstat)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
@@ -214,12 +206,11 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
 
 /*
  * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
- * We list them here and depend on the device side cable detection for them.
- *
  * Some optical devices with the buggy firmwares have the same problem.
  */
 static const struct drive_list_entry ivb_list[] = {
 	{ "QUANTUM FIREBALLlct10 05"	, "A03.0900"	},
+	{ "QUANTUM FIREBALLlct20 30"	, "APL.0900"	},
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB00"	},
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB01"	},
 	{ "TSSTcorp CDDVDW SH-S202N"	, "SB00"	},
@@ -259,10 +250,25 @@ u8 eighty_ninty_three(ide_drive_t *drive)
 	 * - force bit13 (80c cable present) check also for !ivb devices
 	 *   (unless the slave device is pre-ATA3)
 	 */
-	if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
-	    (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
+	if (id[ATA_ID_HW_CONFIG] & 0x4000)
 		return 1;
 
+	if (ivb) {
+		const char *model = (char *)&id[ATA_ID_PROD];
+
+		if (strstr(model, "TSSTcorp CDDVDW SH-S202")) {
+			/*
+			 * These ATAPI devices always report 80c cable
+			 * so we have to depend on the host in this case.
+			 */
+			if (hwif->cbl == ATA_CBL_PATA80)
+				return 1;
+		} else {
+			/* Depend on the device side cable detection. */
+			if (id[ATA_ID_HW_CONFIG] & 0x2000)
+				return 1;
+		}
+	}
 no_80w:
 	if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
 		return 0;
@@ -277,6 +283,30 @@ no_80w:
 	return 0;
 }
 
+static const char *nien_quirk_list[] = {
+	"QUANTUM FIREBALLlct08 08",
+	"QUANTUM FIREBALLP KA6.4",
+	"QUANTUM FIREBALLP KA9.1",
+	"QUANTUM FIREBALLP KX13.6",
+	"QUANTUM FIREBALLP KX20.5",
+	"QUANTUM FIREBALLP KX27.3",
+	"QUANTUM FIREBALLP LM20.4",
+	"QUANTUM FIREBALLP LM20.5",
+	"FUJITSU MHZ2160BH G2",
+	NULL
+};
+
+void ide_check_nien_quirk_list(ide_drive_t *drive)
+{
+	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
+
+	for (list = nien_quirk_list; *list != NULL; list++)
+		if (strstr(m, *list) != NULL) {
+			drive->dev_flags |= IDE_DFLAG_NIEN_QUIRK;
+			return;
+		}
+}
+
 int ide_driveid_update(ide_drive_t *drive)
 {
 	u16 *id;
@@ -287,7 +317,7 @@ int ide_driveid_update(ide_drive_t *drive)
 		return 0;
 
 	SELECT_MASK(drive, 1);
-	rc = ide_dev_read_id(drive, ATA_CMD_ID_ATA, id);
+	rc = ide_dev_read_id(drive, ATA_CMD_ID_ATA, id, 1);
 	SELECT_MASK(drive, 0);
 
 	if (rc)
@@ -301,12 +331,8 @@ int ide_driveid_update(ide_drive_t *drive)
 
 	kfree(id);
 
-	if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
-		ide_dma_off(drive);
-
 	return 1;
 out_err:
-	SELECT_MASK(drive, 0);
 	if (rc == 2)
 		printk(KERN_ERR "%s: %s: bad status\n", drive->name, __func__);
 	kfree(id);
@@ -317,10 +343,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+	struct ide_taskfile tf;
 	u16 *id = drive->id, i;
 	int error = 0;
 	u8 stat;
-	struct ide_cmd cmd;
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	if (hwif->dma_ops)	/* check if host supports DMA */
@@ -338,30 +364,21 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 	 * this point (lost interrupt).
 	 */
 
-	/*
-	 *	FIXME: we race against the running IRQ here if
-	 *	this is called from non IRQ context. If we use
-	 *	disable_irq() we hang on the error path. Work
-	 *	is needed.
-	 */
-	disable_irq_nosync(hwif->irq);
-
 	udelay(1);
-	SELECT_DRIVE(drive);
+	tp_ops->dev_select(drive);
 	SELECT_MASK(drive, 1);
 	udelay(1);
 	tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS);
 
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT;
-	cmd.tf.feature = SETFEATURES_XFER;
-	cmd.tf.nsect   = speed;
+	memset(&tf, 0, sizeof(tf));
+	tf.feature = SETFEATURES_XFER;
+	tf.nsect   = speed;
 
-	tp_ops->tf_load(drive, &cmd);
+	tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE | IDE_VALID_NSECT);
 
 	tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES);
 
-	if (drive->quirk_list == 2)
+	if (drive->dev_flags & IDE_DFLAG_NIEN_QUIRK)
 		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
 
 	error = __ide_wait_stat(drive, drive->ready_stat,
@@ -370,8 +387,6 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 
 	SELECT_MASK(drive, 0);
 
-	enable_irq(hwif->irq);
-
 	if (error) {
 		(void) ide_dump_status(drive, "set_drive_speed_status", stat);
 		return error;