X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fide%2Fide-floppy.c;h=f05fbc2bd7a89ac597c1261acfc143f6df21d173;hb=854a989546c12683186c84601d4902591dddd8a9;hp=c346c2174d0b21635e9833e63fd19d488a115ede;hpb=4d37d32e4ab5241554ab4a60ff8ee159ba48851c;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index c346c21..f05fbc2 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -4,11 +4,6 @@ * Copyright (C) 1996-1999 Gadi Oxman * Copyright (C) 2000-2002 Paul Bristow * Copyright (C) 2005 Bartlomiej Zolnierkiewicz - */ - -/* - * The driver currently doesn't have any fancy features, just the bare - * minimum read/write support. * * This driver supports the following IDE floppy drives: * @@ -20,7 +15,7 @@ * Documentation/ide/ChangeLog.ide-floppy.1996-2002 */ -#define IDEFLOPPY_VERSION "0.99.newide" +#define IDEFLOPPY_VERSION "1.00" #include #include @@ -47,137 +42,52 @@ #include #include -/* - * The following are used to debug the driver. - */ +/* define to see debug info */ #define IDEFLOPPY_DEBUG_LOG 0 -#define IDEFLOPPY_DEBUG_INFO 0 -#define IDEFLOPPY_DEBUG_BUGS 1 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ -#define IDEFLOPPY_DEBUG( fmt, args... ) +#define IDEFLOPPY_DEBUG(fmt, args...) #if IDEFLOPPY_DEBUG_LOG #define debug_log(fmt, args...) \ printk(KERN_INFO "ide-floppy: " fmt, ## args) #else -#define debug_log(fmt, args... ) do {} while(0) +#define debug_log(fmt, args...) do {} while (0) #endif -/* - * Some drives require a longer irq timeout. - */ +/* Some drives require a longer irq timeout. */ #define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD) /* - * After each failed packet command we issue a request sense command - * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times. + * After each failed packet command we issue a request sense command and retry + * the packet command IDEFLOPPY_MAX_PC_RETRIES times. */ #define IDEFLOPPY_MAX_PC_RETRIES 3 /* - * With each packet command, we allocate a buffer of - * IDEFLOPPY_PC_BUFFER_SIZE bytes. + * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE + * bytes. */ #define IDEFLOPPY_PC_BUFFER_SIZE 256 /* - * In various places in the driver, we need to allocate storage - * for packet commands and requests, which will remain valid while - * we leave the driver to wait for an interrupt or a timeout event. + * In various places in the driver, we need to allocate storage for packet + * commands and requests, which will remain valid while we leave the driver to + * wait for an interrupt or a timeout event. */ #define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES) -/* - * Our view of a packet command. - */ -typedef struct idefloppy_packet_command_s { - u8 c[12]; /* Actual packet bytes */ - int retries; /* On each retry, we increment retries */ - int error; /* Error code */ - int request_transfer; /* Bytes to transfer */ - int actually_transferred; /* Bytes actually transferred */ - int buffer_size; /* Size of our data buffer */ - int b_count; /* Missing/Available data on the current buffer */ - struct request *rq; /* The corresponding request */ - u8 *buffer; /* Data buffer */ - u8 *current_position; /* Pointer into the above buffer */ - void (*callback) (ide_drive_t *); /* Called when this packet command is completed */ - u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */ - unsigned long flags; /* Status/Action bit flags: long for set_bit */ -} idefloppy_pc_t; - -/* - * Packet command flag bits. - */ -#define PC_ABORT 0 /* Set when an error is considered normal - We won't retry */ -#define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */ -#define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */ -#define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */ -#define PC_WRITING 5 /* Data direction */ - -#define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */ - -/* - * Flexible disk page. - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x5 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; /* The device is capable of saving the page */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; /* The device is capable of saving the page */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned page_code :6; /* Page code - Should be 0x5 */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 page_length; /* Page Length - Should be 0x1e */ - u16 transfer_rate; /* In kilobits per second */ - u8 heads, sectors; /* Number of heads, Number of sectors per track */ - u16 sector_size; /* Byes per sector */ - u16 cyls; /* Number of cylinders */ - u8 reserved10[10]; - u8 motor_delay; /* Motor off delay */ - u8 reserved21[7]; - u16 rpm; /* Rotations per minute */ - u8 reserved30[2]; -} idefloppy_flexible_disk_page_t; - -/* - * Format capacity - */ -typedef struct { - u8 reserved[3]; - u8 length; /* Length of the following descriptors in bytes */ -} idefloppy_capacity_header_t; - -typedef struct { - u32 blocks; /* Number of blocks */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned dc :2; /* Descriptor Code */ - unsigned reserved :6; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved :6; - unsigned dc :2; /* Descriptor Code */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 length_msb; /* Block Length (MSB)*/ - u16 length; /* Block Length */ -} idefloppy_capacity_descriptor_t; - +/* format capacities descriptor codes */ #define CAPACITY_INVALID 0x00 #define CAPACITY_UNFORMATTED 0x01 #define CAPACITY_CURRENT 0x02 #define CAPACITY_NO_CARTRIDGE 0x03 /* - * Most of our global data which we need to save even as we leave the - * driver due to an interrupt or a timer event is stored in a variable - * of type idefloppy_floppy_t, defined below. + * Most of our global data which we need to save even as we leave the driver + * due to an interrupt or a timer event is stored in a variable of type + * idefloppy_floppy_t, defined below. */ typedef struct ide_floppy_obj { ide_drive_t *drive; @@ -187,34 +97,30 @@ typedef struct ide_floppy_obj { unsigned int openers; /* protected by BKL for now */ /* Current packet command */ - idefloppy_pc_t *pc; + struct ide_atapi_pc *pc; /* Last failed packet command */ - idefloppy_pc_t *failed_pc; + struct ide_atapi_pc *failed_pc; /* Packet command stack */ - idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK]; + struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK]; /* Next free packet command storage space */ int pc_stack_index; struct request rq_stack[IDEFLOPPY_PC_STACK]; /* We implement a circular array */ int rq_stack_index; - /* - * Last error information - */ + /* Last error information */ u8 sense_key, asc, ascq; /* delay this long before sending packet command */ u8 ticks; int progress_indication; - /* - * Device information - */ + /* Device information */ /* Current format */ int blocks, block_size, bs_factor; - /* Last format capacity */ - idefloppy_capacity_descriptor_t capacity; + /* Last format capacity descriptor */ + u8 cap_desc[8]; /* Copy of the flexible disk page */ - idefloppy_flexible_disk_page_t flexible_disk_page; + u8 flexible_disk_page[32]; /* Write protect */ int wp; /* Supports format progress report */ @@ -225,123 +131,42 @@ typedef struct ide_floppy_obj { #define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ -/* - * Floppy flag bits values. - */ -#define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */ -#define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */ -#define IDEFLOPPY_USE_READ12 2 /* Use READ12/WRITE12 or READ10/WRITE10 */ -#define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */ -#define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */ -#define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */ +/* Floppy flag bits values. */ +enum { + /* DRQ interrupt device */ + IDEFLOPPY_FLAG_DRQ_INTERRUPT = (1 << 0), + /* Media may have changed */ + IDEFLOPPY_FLAG_MEDIA_CHANGED = (1 << 1), + /* Format in progress */ + IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS = (1 << 2), + /* Avoid commands not supported in Clik drive */ + IDEFLOPPY_FLAG_CLIK_DRIVE = (1 << 3), + /* Requires BH algorithm for packets */ + IDEFLOPPY_FLAG_ZIP_DRIVE = (1 << 4), +}; -/* - * Defines for the mode sense command - */ +/* Defines for the MODE SENSE command */ #define MODE_SENSE_CURRENT 0x00 #define MODE_SENSE_CHANGEABLE 0x01 -#define MODE_SENSE_DEFAULT 0x02 +#define MODE_SENSE_DEFAULT 0x02 #define MODE_SENSE_SAVED 0x03 -/* - * IOCTLs used in low-level formatting. - */ - +/* IOCTLs used in low-level formatting. */ #define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600 #define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601 #define IDEFLOPPY_IOCTL_FORMAT_START 0x4602 #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603 -/* - * Error codes which are returned in rq->errors to the higher part - * of the driver. - */ +/* Error code returned in rq->errors to the higher part of the driver. */ #define IDEFLOPPY_ERROR_GENERAL 101 /* - * The following is used to format the general configuration word of - * the ATAPI IDENTIFY DEVICE command. - */ -struct idefloppy_id_gcw { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned packet_size :2; /* Packet Size */ - unsigned reserved234 :3; /* Reserved */ - unsigned drq_type :2; /* Command packet DRQ type */ - unsigned removable :1; /* Removable media */ - unsigned device_type :5; /* Device type */ - unsigned reserved13 :1; /* Reserved */ - unsigned protocol :2; /* Protocol type */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned protocol :2; /* Protocol type */ - unsigned reserved13 :1; /* Reserved */ - unsigned device_type :5; /* Device type */ - unsigned removable :1; /* Removable media */ - unsigned drq_type :2; /* Command packet DRQ type */ - unsigned reserved234 :3; /* Reserved */ - unsigned packet_size :2; /* Packet Size */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif -}; - -/* - * REQUEST SENSE packet command result - Data Format. - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned error_code :7; /* Current error (0x70) */ - unsigned valid :1; /* The information field conforms to SFF-8070i */ - u8 reserved1 :8; /* Reserved */ - unsigned sense_key :4; /* Sense Key */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned reserved2_67 :2; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned valid :1; /* The information field conforms to SFF-8070i */ - unsigned error_code :7; /* Current error (0x70) */ - u8 reserved1 :8; /* Reserved */ - unsigned reserved2_67 :2; - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned sense_key :4; /* Sense Key */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u32 information __attribute__ ((packed)); - u8 asl; /* Additional sense length (n-7) */ - u32 command_specific; /* Additional command specific information */ - u8 asc; /* Additional Sense Code */ - u8 ascq; /* Additional Sense Code Qualifier */ - u8 replaceable_unit_code; /* Field Replaceable Unit Code */ - u8 sksv[3]; - u8 pad[2]; /* Padding to 20 bytes */ -} idefloppy_request_sense_result_t; - -/* * Pages of the SELECT SENSE / MODE SENSE packet commands. * See SFF-8070i spec. */ #define IDEFLOPPY_CAPABILITIES_PAGE 0x1b #define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05 -/* - * Mode Parameter Header for the MODE SENSE packet command - */ -typedef struct { - u16 mode_data_length; /* Length of the following data transfer */ - u8 medium_type; /* Medium Type */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved3 :7; - unsigned wp :1; /* Write protect */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned wp :1; /* Write protect */ - unsigned reserved3 :7; -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 reserved[4]; -} idefloppy_mode_parameter_header_t; - static DEFINE_MUTEX(idefloppy_ref_mutex); #define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref) @@ -371,31 +196,10 @@ static void ide_floppy_put(struct ide_floppy_obj *floppy) } /* - * Too bad. The drive wants to send us data which we are not ready to accept. - * Just throw it away. - */ -static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount) -{ - while (bcount--) - (void) HWIF(drive)->INB(IDE_DATA_REG); -} - -#if IDEFLOPPY_DEBUG_BUGS -static void idefloppy_write_zeros (ide_drive_t *drive, unsigned int bcount) -{ - while (bcount--) - HWIF(drive)->OUTB(0, IDE_DATA_REG); -} -#endif /* IDEFLOPPY_DEBUG_BUGS */ - - -/* - * idefloppy_do_end_request is used to finish servicing a request. - * - * For read/write requests, we will call ide_end_request to pass to the - * next buffer. + * Used to finish servicing a request. For read/write requests, we will call + * ide_end_request to pass to the next buffer. */ -static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) +static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) { idefloppy_floppy_t *floppy = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; @@ -404,9 +208,9 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) debug_log("Reached %s\n", __func__); switch (uptodate) { - case 0: error = IDEFLOPPY_ERROR_GENERAL; break; - case 1: error = 0; break; - default: error = uptodate; + case 0: error = IDEFLOPPY_ERROR_GENERAL; break; + case 1: error = 0; break; + default: error = uptodate; } if (error) floppy->failed_pc = NULL; @@ -424,40 +228,10 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) return 0; } -static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount) -{ - struct request *rq = pc->rq; - struct bio_vec *bvec; - struct req_iterator iter; - unsigned long flags; - char *data; - int count, done = 0; - - rq_for_each_segment(bvec, rq, iter) { - if (!bcount) - break; - - count = min(bvec->bv_len, bcount); - - data = bvec_kmap_irq(bvec, &flags); - drive->hwif->atapi_input_bytes(drive, data, count); - bvec_kunmap_irq(data, &flags); - - bcount -= count; - pc->b_count += count; - done += count; - } - - idefloppy_do_end_request(drive, 1, done >> 9); - - if (bcount) { - printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers, bcount == %d\n", drive->name, bcount); - idefloppy_discard_data(drive, bcount); - } -} - -static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount) +static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned int bcount, int direction) { + ide_hwif_t *hwif = drive->hwif; struct request *rq = pc->rq; struct req_iterator iter; struct bio_vec *bvec; @@ -472,7 +246,10 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un count = min(bvec->bv_len, bcount); data = bvec_kmap_irq(bvec, &flags); - drive->hwif->atapi_output_bytes(drive, data, count); + if (direction) + hwif->output_data(drive, NULL, data, count); + else + hwif->input_data(drive, NULL, data, count); bvec_kunmap_irq(data, &flags); bcount -= count; @@ -480,31 +257,32 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un done += count; } - idefloppy_do_end_request(drive, 1, done >> 9); + idefloppy_end_request(drive, 1, done >> 9); -#if IDEFLOPPY_DEBUG_BUGS if (bcount) { - printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount); - idefloppy_write_zeros(drive, bcount); + printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n", + drive->name, __func__, bcount); + ide_pad_transfer(drive, direction, bcount); } -#endif } -static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc) +static void idefloppy_update_buffers(ide_drive_t *drive, + struct ide_atapi_pc *pc) { struct request *rq = pc->rq; struct bio *bio = rq->bio; while ((bio = rq->bio) != NULL) - idefloppy_do_end_request(drive, 1, 0); + idefloppy_end_request(drive, 1, 0); } /* - * idefloppy_queue_pc_head generates a new packet command request in front - * of the request queue, before the current request, so that it will be - * processed immediately, on the next pass through the driver. + * Generate a new packet command request in front of the request queue, before + * the current request so that it will be processed immediately, on the next + * pass through the driver. */ -static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq) +static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, + struct request *rq) { struct ide_floppy_obj *floppy = drive->driver_data; @@ -515,16 +293,16 @@ static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struc (void) ide_do_drive_cmd(drive, rq, ide_preempt); } -static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive) +static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK) - floppy->pc_stack_index=0; + floppy->pc_stack_index = 0; return (&floppy->pc_stack[floppy->pc_stack_index++]); } -static struct request *idefloppy_next_rq_storage (ide_drive_t *drive) +static struct request *idefloppy_next_rq_storage(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -533,132 +311,128 @@ static struct request *idefloppy_next_rq_storage (ide_drive_t *drive) return (&floppy->rq_stack[floppy->rq_stack_index++]); } -/* - * idefloppy_analyze_error is called on each failed packet command retry - * to analyze the request sense. - */ -static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_result_t *result) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - floppy->sense_key = result->sense_key; - floppy->asc = result->asc; - floppy->ascq = result->ascq; - floppy->progress_indication = result->sksv[0] & 0x80 ? - (u16)get_unaligned((u16 *)(result->sksv+1)):0x10000; - if (floppy->failed_pc) - debug_log("pc = %x, sense key = %x, asc = %x, ascq = %x\n", - floppy->failed_pc->c[0], result->sense_key, - result->asc, result->ascq); - else - debug_log("sense key = %x, asc = %x, ascq = %x\n", - result->sense_key, result->asc, result->ascq); -} - -static void idefloppy_request_sense_callback (ide_drive_t *drive) +static void idefloppy_request_sense_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; + u8 *buf = floppy->pc->buf; debug_log("Reached %s\n", __func__); if (!floppy->pc->error) { - idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer); - idefloppy_do_end_request(drive, 1, 0); + floppy->sense_key = buf[2] & 0x0F; + floppy->asc = buf[12]; + floppy->ascq = buf[13]; + floppy->progress_indication = buf[15] & 0x80 ? + (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; + + if (floppy->failed_pc) + debug_log("pc = %x, sense key = %x, asc = %x," + " ascq = %x\n", + floppy->failed_pc->c[0], + floppy->sense_key, + floppy->asc, + floppy->ascq); + else + debug_log("sense key = %x, asc = %x, ascq = %x\n", + floppy->sense_key, + floppy->asc, + floppy->ascq); + + + idefloppy_end_request(drive, 1, 0); } else { - printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting request!\n"); - idefloppy_do_end_request(drive, 0, 0); + printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting" + " request!\n"); + idefloppy_end_request(drive, 0, 0); } } -/* - * General packet command callback function. - */ -static void idefloppy_pc_callback (ide_drive_t *drive) +/* General packet command callback function. */ +static void idefloppy_pc_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; debug_log("Reached %s\n", __func__); - idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0); + idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0); } -/* - * idefloppy_init_pc initializes a packet command. - */ -static void idefloppy_init_pc (idefloppy_pc_t *pc) +static void idefloppy_init_pc(struct ide_atapi_pc *pc) { memset(pc->c, 0, 12); pc->retries = 0; pc->flags = 0; - pc->request_transfer = 0; - pc->buffer = pc->pc_buffer; - pc->buffer_size = IDEFLOPPY_PC_BUFFER_SIZE; - pc->callback = &idefloppy_pc_callback; + pc->req_xfer = 0; + pc->buf = pc->pc_buf; + pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; + pc->idefloppy_callback = &idefloppy_pc_callback; } -static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc) +static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_REQUEST_SENSE; pc->c[4] = 255; - pc->request_transfer = 18; - pc->callback = &idefloppy_request_sense_callback; + pc->req_xfer = 18; + pc->idefloppy_callback = &idefloppy_request_sense_callback; } /* - * idefloppy_retry_pc is called when an error was detected during the - * last packet command. We queue a request sense packet command in - * the head of the request list. + * Called when an error was detected during the last packet command. We queue a + * request sense packet command in the head of the request list. */ -static void idefloppy_retry_pc (ide_drive_t *drive) +static void idefloppy_retry_pc(ide_drive_t *drive) { - idefloppy_pc_t *pc; + struct ide_atapi_pc *pc; struct request *rq; - (void)drive->hwif->INB(IDE_ERROR_REG); + (void)ide_read_error(drive); pc = idefloppy_next_pc_storage(drive); rq = idefloppy_next_rq_storage(drive); idefloppy_create_request_sense_cmd(pc); idefloppy_queue_pc_head(drive, pc, rq); } -/* - * idefloppy_pc_intr is the usual interrupt handler which will be called - * during a packet command. - */ -static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) +/* The usual interrupt handler called during a packet command. */ +static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - idefloppy_pc_t *pc = floppy->pc; + struct ide_atapi_pc *pc = floppy->pc; struct request *rq = pc->rq; + xfer_func_t *xferfunc; unsigned int temp; + int dma_error = 0; u16 bcount; u8 stat, ireason; debug_log("Reached %s interrupt handler\n", __func__); - if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { - if (HWIF(drive)->ide_dma_end(drive)) { - set_bit(PC_DMA_ERROR, &pc->flags); + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + dma_error = hwif->dma_ops->dma_end(drive); + if (dma_error) { + printk(KERN_ERR "%s: DMA %s error\n", drive->name, + rq_data_dir(rq) ? "write" : "read"); + pc->flags |= PC_FLAG_DMA_ERROR; } else { - pc->actually_transferred = pc->request_transfer; + pc->xferred = pc->req_xfer; idefloppy_update_buffers(drive, pc); } debug_log("DMA finished\n"); } /* Clear the interrupt */ - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); - if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ + /* No more interrupts */ + if ((stat & DRQ_STAT) == 0) { debug_log("Packet command completed, %d bytes transferred\n", - pc->actually_transferred); - clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); + pc->xferred); + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); - if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { /* Error detected */ debug_log("%s: I/O error\n", drive->name); rq->errors++; @@ -676,11 +450,12 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) if (floppy->failed_pc == pc) floppy->failed_pc = NULL; /* Command finished - Call the callback function */ - pc->callback(drive); + pc->idefloppy_callback(drive); return ide_stopped; } - if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; printk(KERN_ERR "ide-floppy: The floppy wants to issue " "more interrupts in DMA mode\n"); ide_dma_off(drive); @@ -688,16 +463,16 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) } /* Get the number of bytes to transfer */ - bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | - hwif->INB(IDE_BCOUNTL_REG); + bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | + hwif->INB(hwif->io_ports.lbam_addr); /* on this interrupt */ - ireason = hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { - printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n"); + printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__); return ide_do_reset(drive); } - if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { + if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ printk(KERN_ERR "ide-floppy: We wanted to %s, ", (ireason & IO) ? "Write" : "Read"); @@ -705,15 +480,15 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } - if (!test_bit(PC_WRITING, &pc->flags)) { + if (!(pc->flags & PC_FLAG_WRITING)) { /* Reading - Check that we have enough space */ - temp = pc->actually_transferred + bcount; - if (temp > pc->request_transfer) { - if (temp > pc->buffer_size) { + temp = pc->xferred + bcount; + if (temp > pc->req_xfer) { + if (temp > pc->buf_size) { printk(KERN_ERR "ide-floppy: The floppy wants " "to send us more data than expected " "- discarding data\n"); - idefloppy_discard_data(drive, bcount); + ide_pad_transfer(drive, 0, bcount); ide_set_handler(drive, &idefloppy_pc_intr, @@ -725,26 +500,23 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) " expected - allowing transfer\n"); } } - if (test_bit(PC_WRITING, &pc->flags)) { - if (pc->buffer != NULL) - /* Write the current buffer */ - hwif->atapi_output_bytes(drive, pc->current_position, - bcount); - else - idefloppy_output_buffers(drive, pc, bcount); - } else { - if (pc->buffer != NULL) - /* Read the current buffer */ - hwif->atapi_input_bytes(drive, pc->current_position, - bcount); - else - idefloppy_input_buffers(drive, pc, bcount); - } + if (pc->flags & PC_FLAG_WRITING) + xferfunc = hwif->output_data; + else + xferfunc = hwif->input_data; + + if (pc->buf) + xferfunc(drive, NULL, pc->cur_pos, bcount); + else + ide_floppy_io_buffers(drive, pc, bcount, + !!(pc->flags & PC_FLAG_WRITING)); + /* Update the current position */ - pc->actually_transferred += bcount; - pc->current_position += bcount; + pc->xferred += bcount; + pc->cur_pos += bcount; - ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* And set the interrupt handler again */ + /* And set the interrupt handler again */ + ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); return ide_started; } @@ -753,8 +525,9 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) * It fails at high speeds on the Iomega ZIP drive, so there's a slower version * for that drive below. The algorithm is chosen based on drive type */ -static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) +static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; ide_startstop_t startstop; idefloppy_floppy_t *floppy = drive->driver_data; u8 ireason; @@ -764,7 +537,7 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason = drive->hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while " "issuing a packet command\n"); @@ -773,36 +546,38 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) /* Set the interrupt routine */ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); + /* Send the actual packet */ - HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12); + hwif->output_data(drive, NULL, floppy->pc->c, 12); + return ide_started; } /* - * What we have here is a classic case of a top half / bottom half - * interrupt service routine. In interrupt mode, the device sends - * an interrupt to signal it's ready to receive a packet. However, - * we need to delay about 2-3 ticks before issuing the packet or we - * gets in trouble. + * What we have here is a classic case of a top half / bottom half interrupt + * service routine. In interrupt mode, the device sends an interrupt to signal + * that it is ready to receive a packet. However, we need to delay about 2-3 + * ticks before issuing the packet or we gets in trouble. * - * So, follow carefully. transfer_pc1 is called as an interrupt (or - * directly). In either case, when the device says it's ready for a - * packet, we schedule the packet transfer to occur about 2-3 ticks - * later in transfer_pc2. + * So, follow carefully. transfer_pc1 is called as an interrupt (or directly). + * In either case, when the device says it's ready for a packet, we schedule + * the packet transfer to occur about 2-3 ticks later in transfer_pc2. */ -static int idefloppy_transfer_pc2 (ide_drive_t *drive) +static int idefloppy_transfer_pc2(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; /* Send the actual packet */ - HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12); + drive->hwif->output_data(drive, NULL, floppy->pc->c, 12); + /* Timeout for the packet command */ return IDEFLOPPY_WAIT_CMD; } -static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) +static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; ide_startstop_t startstop; u8 ireason; @@ -812,13 +587,13 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason = drive->hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) " "while issuing a packet command\n"); return ide_do_reset(drive); } - /* + /* * The following delay solves a problem with ATAPI Zip 100 drives * where the Busy flag was apparently being deasserted before the * unit was ready to receive data. This was happening on a @@ -827,31 +602,29 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) * used until after the packet is moved in about 50 msec. */ - ide_set_handler(drive, - &idefloppy_pc_intr, /* service routine for packet command */ - floppy->ticks, /* wait this long before "failing" */ - &idefloppy_transfer_pc2); /* fail == transfer_pc2 */ + ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks, + &idefloppy_transfer_pc2); return ide_started; } -/** - * idefloppy_should_report_error() - * - * Supresses error messages resulting from Medium not present - */ -static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy) +static void ide_floppy_report_error(idefloppy_floppy_t *floppy, + struct ide_atapi_pc *pc) { + /* supress error messages resulting from Medium not present */ if (floppy->sense_key == 0x02 && floppy->asc == 0x3a && floppy->ascq == 0x00) - return 0; - return 1; + return; + + printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, " + "asc = %2x, ascq = %2x\n", + floppy->drive->name, pc->c[0], floppy->sense_key, + floppy->asc, floppy->ascq); + } -/* - * Issue a packet command - */ -static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc) +static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, + struct ide_atapi_pc *pc) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; @@ -865,27 +638,14 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p /* Set the current packet command */ floppy->pc = pc; - if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES || - test_bit(PC_ABORT, &pc->flags)) { - /* - * We will "abort" retrying a packet command in case - * a legitimate error code was received. - */ - if (!test_bit(PC_ABORT, &pc->flags)) { - if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) { - if (idefloppy_should_report_error(floppy)) - printk(KERN_ERR "ide-floppy: %s: I/O error, " - "pc = %2x, key = %2x, " - "asc = %2x, ascq = %2x\n", - drive->name, pc->c[0], - floppy->sense_key, - floppy->asc, floppy->ascq); - } - /* Giving up */ - pc->error = IDEFLOPPY_ERROR_GENERAL; - } + if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { + if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) + ide_floppy_report_error(floppy, pc); + /* Giving up */ + pc->error = IDEFLOPPY_ERROR_GENERAL; + floppy->failed_pc = NULL; - pc->callback(drive); + pc->idefloppy_callback(drive); return ide_stopped; } @@ -893,36 +653,38 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p pc->retries++; /* We haven't transferred any data yet */ - pc->actually_transferred = 0; - pc->current_position = pc->buffer; - bcount = min(pc->request_transfer, 63 * 1024); + pc->xferred = 0; + pc->cur_pos = pc->buf; + bcount = min(pc->req_xfer, 63 * 1024); - if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) + if (pc->flags & PC_FLAG_DMA_ERROR) { + pc->flags &= ~PC_FLAG_DMA_ERROR; ide_dma_off(drive); - + } dma = 0; - if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) - dma = !hwif->dma_setup(drive); + if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) + dma = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | IDE_TFLAG_OUT_DEVICE, bcount, dma); - if (dma) { /* Begin DMA, if necessary */ - set_bit(PC_DMA_IN_PROGRESS, &pc->flags); - hwif->dma_start(drive); + if (dma) { + /* Begin DMA, if necessary */ + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; + hwif->dma_ops->dma_start(drive); } /* Can we transfer the packet when we get the interrupt or wait? */ - if (test_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags)) { + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { /* wait */ pkt_xfer_routine = &idefloppy_transfer_pc1; } else { /* immediate */ pkt_xfer_routine = &idefloppy_transfer_pc; } - - if (test_bit (IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) { + + if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ ide_execute_command(drive, WIN_PACKETCMD, pkt_xfer_routine, @@ -931,20 +693,20 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p return ide_started; } else { /* Issue the packet command */ - HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + ide_execute_pkt_cmd(drive); return (*pkt_xfer_routine) (drive); } } -static void idefloppy_rw_callback (ide_drive_t *drive) +static void idefloppy_rw_callback(ide_drive_t *drive) { debug_log("Reached %s\n", __func__); - idefloppy_do_end_request(drive, 1, 0); + idefloppy_end_request(drive, 1, 0); return; } -static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent) +static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent) { debug_log("creating prevent removal command, prevent = %d\n", prevent); @@ -953,133 +715,126 @@ static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent) pc->c[4] = prevent; } -static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc) +static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; pc->c[7] = 255; pc->c[8] = 255; - pc->request_transfer = 255; + pc->req_xfer = 255; } -static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, - int flags) +static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b, + int l, int flags) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_FORMAT_UNIT; pc->c[1] = 0x17; - memset(pc->buffer, 0, 12); - pc->buffer[1] = 0xA2; + memset(pc->buf, 0, 12); + pc->buf[1] = 0xA2; /* Default format list header, u8 1: FOV/DCRT/IMM bits set */ if (flags & 1) /* Verify bit on... */ - pc->buffer[1] ^= 0x20; /* ... turn off DCRT bit */ - pc->buffer[3] = 8; + pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */ + pc->buf[3] = 8; - put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4])); - put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8])); - pc->buffer_size=12; - set_bit(PC_WRITING, &pc->flags); + put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4])); + put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8])); + pc->buf_size = 12; + pc->flags |= PC_FLAG_WRITING; } -/* - * A mode sense command is used to "sense" floppy parameters. - */ -static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type) +/* A mode sense command is used to "sense" floppy parameters. */ +static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, + u8 page_code, u8 type) { - u16 length = sizeof(idefloppy_mode_parameter_header_t); - + u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ + idefloppy_init_pc(pc); pc->c[0] = GPCMD_MODE_SENSE_10; pc->c[1] = 0; pc->c[2] = page_code + (type << 6); switch (page_code) { - case IDEFLOPPY_CAPABILITIES_PAGE: - length += 12; - break; - case IDEFLOPPY_FLEXIBLE_DISK_PAGE: - length += 32; - break; - default: - printk(KERN_ERR "ide-floppy: unsupported page code " + case IDEFLOPPY_CAPABILITIES_PAGE: + length += 12; + break; + case IDEFLOPPY_FLEXIBLE_DISK_PAGE: + length += 32; + break; + default: + printk(KERN_ERR "ide-floppy: unsupported page code " "in create_mode_sense_cmd\n"); } put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); - pc->request_transfer = length; + pc->req_xfer = length; } -static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start) +static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_START_STOP_UNIT; pc->c[4] = start; } -static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc) +static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_TEST_UNIT_READY; } -static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector) +static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, + struct ide_atapi_pc *pc, struct request *rq, + unsigned long sector) { int block = sector / floppy->bs_factor; int blocks = rq->nr_sectors / floppy->bs_factor; int cmd = rq_data_dir(rq); - debug_log("create_rw1%d_cmd: block == %d, blocks == %d\n", - 2 * test_bit (IDEFLOPPY_USE_READ12, &floppy->flags), + debug_log("create_rw10_cmd: block == %d, blocks == %d\n", block, blocks); idefloppy_init_pc(pc); - if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) { - pc->c[0] = cmd == READ ? GPCMD_READ_12 : GPCMD_WRITE_12; - put_unaligned(cpu_to_be32(blocks), (unsigned int *) &pc->c[6]); - } else { - pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; - put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); - } + pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; + put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); - pc->callback = &idefloppy_rw_callback; + + pc->idefloppy_callback = &idefloppy_rw_callback; pc->rq = rq; pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; if (rq->cmd_flags & REQ_RW) - set_bit(PC_WRITING, &pc->flags); - pc->buffer = NULL; - pc->request_transfer = pc->buffer_size = blocks * floppy->block_size; - set_bit(PC_DMA_RECOMMENDED, &pc->flags); + pc->flags |= PC_FLAG_WRITING; + pc->buf = NULL; + pc->req_xfer = pc->buf_size = blocks * floppy->block_size; + pc->flags |= PC_FLAG_DMA_RECOMMENDED; } -static void -idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq) +static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, + struct ide_atapi_pc *pc, struct request *rq) { idefloppy_init_pc(pc); - pc->callback = &idefloppy_rw_callback; + pc->idefloppy_callback = &idefloppy_rw_callback; memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; pc->b_count = rq->data_len; if (rq->data_len && rq_data_dir(rq) == WRITE) - set_bit(PC_WRITING, &pc->flags); - pc->buffer = rq->data; + pc->flags |= PC_FLAG_WRITING; + pc->buf = rq->data; if (rq->bio) - set_bit(PC_DMA_RECOMMENDED, &pc->flags); - + pc->flags |= PC_FLAG_DMA_RECOMMENDED; /* * possibly problematic, doesn't look like ide-floppy correctly * handled scattered requests if dma fails... */ - pc->request_transfer = pc->buffer_size = rq->data_len; + pc->req_xfer = pc->buf_size = rq->data_len; } -/* - * idefloppy_do_request is our request handling function. - */ -static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s) +static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, + struct request *rq, sector_t block_s) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t *pc; + struct ide_atapi_pc *pc; unsigned long block = (unsigned long)block_s; debug_log("dev: %s, cmd_type: %x, errors: %d\n", @@ -1090,38 +845,33 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request rq->nr_sectors, rq->current_nr_sectors); if (rq->errors >= ERROR_MAX) { - if (floppy->failed_pc != NULL) { - if (idefloppy_should_report_error(floppy)) - printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x," - " key = %2x, asc = %2x, ascq = %2x\n", - drive->name, floppy->failed_pc->c[0], - floppy->sense_key, floppy->asc, floppy->ascq); - } + if (floppy->failed_pc) + ide_floppy_report_error(floppy, floppy->failed_pc); else printk(KERN_ERR "ide-floppy: %s: I/O error\n", drive->name); - idefloppy_do_end_request(drive, 0, 0); + idefloppy_end_request(drive, 0, 0); return ide_stopped; } if (blk_fs_request(rq)) { if (((long)rq->sector % floppy->bs_factor) || (rq->nr_sectors % floppy->bs_factor)) { - printk("%s: unsupported r/w request size\n", - drive->name); - idefloppy_do_end_request(drive, 0, 0); + printk(KERN_ERR "%s: unsupported r/w request size\n", + drive->name); + idefloppy_end_request(drive, 0, 0); return ide_stopped; } pc = idefloppy_next_pc_storage(drive); idefloppy_create_rw_cmd(floppy, pc, rq, block); } else if (blk_special_request(rq)) { - pc = (idefloppy_pc_t *) rq->buffer; + pc = (struct ide_atapi_pc *) rq->buffer; } else if (blk_pc_request(rq)) { pc = idefloppy_next_pc_storage(drive); idefloppy_blockpc_cmd(floppy, pc, rq); } else { blk_dump_rq_flags(rq, "ide-floppy: unsupported command in queue"); - idefloppy_do_end_request(drive, 0, 0); + idefloppy_end_request(drive, 0, 0); return ide_stopped; } @@ -1130,15 +880,15 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request } /* - * idefloppy_queue_pc_tail adds a special packet command request to the - * tail of the request queue, and waits for it to be serviced. + * Add a special packet command request to the tail of the request queue, + * and wait for it to be serviced. */ -static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc) +static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_floppy_obj *floppy = drive->driver_data; struct request rq; - ide_init_drive_cmd (&rq); + ide_init_drive_cmd(&rq); rq.buffer = (char *) pc; rq.cmd_type = REQ_TYPE_SPECIAL; rq.rq_disk = floppy->disk; @@ -1147,50 +897,57 @@ static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc) } /* - * Look at the flexible disk page parameters. We will ignore the CHS - * capacity parameters and use the LBA parameters instead. + * Look at the flexible disk page parameters. We ignore the CHS capacity + * parameters and use the LBA parameters instead. */ -static int idefloppy_get_flexible_disk_page (ide_drive_t *drive) +static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t pc; - idefloppy_mode_parameter_header_t *header; - idefloppy_flexible_disk_page_t *page; + struct ide_atapi_pc pc; + u8 *page; int capacity, lba_capacity; + u16 transfer_rate, sector_size, cyls, rpm; + u8 heads, sectors; + + idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, + MODE_SENSE_CURRENT); - idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, MODE_SENSE_CURRENT); - if (idefloppy_queue_pc_tail(drive,&pc)) { - printk(KERN_ERR "ide-floppy: Can't get flexible disk " - "page parameters\n"); + if (idefloppy_queue_pc_tail(drive, &pc)) { + printk(KERN_ERR "ide-floppy: Can't get flexible disk page" + " parameters\n"); return 1; } - header = (idefloppy_mode_parameter_header_t *) pc.buffer; - floppy->wp = header->wp; + floppy->wp = !!(pc.buf[3] & 0x80); set_disk_ro(floppy->disk, floppy->wp); - page = (idefloppy_flexible_disk_page_t *) (header + 1); - - page->transfer_rate = be16_to_cpu(page->transfer_rate); - page->sector_size = be16_to_cpu(page->sector_size); - page->cyls = be16_to_cpu(page->cyls); - page->rpm = be16_to_cpu(page->rpm); - capacity = page->cyls * page->heads * page->sectors * page->sector_size; - if (memcmp (page, &floppy->flexible_disk_page, sizeof (idefloppy_flexible_disk_page_t))) + page = &pc.buf[8]; + + transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]); + sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]); + cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]); + rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]); + heads = pc.buf[8 + 4]; + sectors = pc.buf[8 + 5]; + + capacity = cyls * heads * sectors * sector_size; + + if (memcmp(page, &floppy->flexible_disk_page, 32)) printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, " "%d sector size, %d rpm\n", - drive->name, capacity / 1024, page->cyls, - page->heads, page->sectors, - page->transfer_rate / 8, page->sector_size, page->rpm); - - floppy->flexible_disk_page = *page; - drive->bios_cyl = page->cyls; - drive->bios_head = page->heads; - drive->bios_sect = page->sectors; + drive->name, capacity / 1024, cyls, heads, + sectors, transfer_rate / 8, sector_size, rpm); + + memcpy(&floppy->flexible_disk_page, page, 32); + drive->bios_cyl = cyls; + drive->bios_head = heads; + drive->bios_sect = sectors; lba_capacity = floppy->blocks * floppy->block_size; + if (capacity < lba_capacity) { printk(KERN_NOTICE "%s: The disk reports a capacity of %d " "bytes, but the drive only handles %d\n", drive->name, lba_capacity, capacity); - floppy->blocks = floppy->block_size ? capacity / floppy->block_size : 0; + floppy->blocks = floppy->block_size ? + capacity / floppy->block_size : 0; } return 0; } @@ -1198,32 +955,32 @@ static int idefloppy_get_flexible_disk_page (ide_drive_t *drive) static int idefloppy_get_sfrp_bit(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; floppy->srfp = 0; idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE, MODE_SENSE_CURRENT); - set_bit(PC_SUPPRESS_ERROR, &pc.flags); + pc.flags |= PC_FLAG_SUPPRESS_ERROR; if (idefloppy_queue_pc_tail(drive, &pc)) return 1; - floppy->srfp = pc.buffer[8 + 2] & 0x40; + floppy->srfp = pc.buf[8 + 2] & 0x40; return (0); } /* - * Determine if a media is present in the floppy drive, and if so, - * its LBA capacity. + * Determine if a media is present in the floppy drive, and if so, its LBA + * capacity. */ -static int idefloppy_get_capacity (ide_drive_t *drive) +static int ide_floppy_get_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t pc; - idefloppy_capacity_header_t *header; - idefloppy_capacity_descriptor_t *descriptor; - int i, descriptors, rc = 1, blocks, length; - + struct ide_atapi_pc pc; + u8 *cap_desc; + u8 header_len, desc_cnt; + int i, rc = 1, blocks, length; + drive->bios_cyl = 0; drive->bios_head = drive->bios_sect = 0; floppy->blocks = 0; @@ -1235,44 +992,55 @@ static int idefloppy_get_capacity (ide_drive_t *drive) printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); return 1; } - header = (idefloppy_capacity_header_t *) pc.buffer; - descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t); - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); + header_len = pc.buf[3]; + cap_desc = &pc.buf[4]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ + + for (i = 0; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; + + blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); + + debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", + i, blocks * length / 1024, blocks, length); - for (i = 0; i < descriptors; i++, descriptor++) { - blocks = descriptor->blocks = be32_to_cpu(descriptor->blocks); - length = descriptor->length = be16_to_cpu(descriptor->length); + if (i) + continue; + /* + * the code below is valid only for the 1st descriptor, ie i=0 + */ - if (!i) - { - switch (descriptor->dc) { + switch (pc.buf[desc_start + 4] & 0x03) { /* Clik! drive returns this instead of CAPACITY_CURRENT */ case CAPACITY_UNFORMATTED: - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) - /* + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) + /* * If it is not a clik drive, break out * (maintains previous driver behaviour) */ break; case CAPACITY_CURRENT: /* Normal Zip/LS-120 disks */ - if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t))) + if (memcmp(cap_desc, &floppy->cap_desc, 8)) printk(KERN_INFO "%s: %dkB, %d blocks, %d " "sector size\n", drive->name, blocks * length / 1024, blocks, length); - floppy->capacity = *descriptor; + memcpy(&floppy->cap_desc, cap_desc, 8); + if (!length || length % 512) { printk(KERN_NOTICE "%s: %d bytes block size " "not supported\n", drive->name, length); } else { - floppy->blocks = blocks; - floppy->block_size = length; - if ((floppy->bs_factor = length / 512) != 1) - printk(KERN_NOTICE "%s: warning: non " + floppy->blocks = blocks; + floppy->block_size = length; + floppy->bs_factor = length / 512; + if (floppy->bs_factor != 1) + printk(KERN_NOTICE "%s: warning: non " "512 bytes block size not " "fully supported\n", drive->name); - rc = 0; + rc = 0; } break; case CAPACITY_NO_CARTRIDGE: @@ -1287,52 +1055,42 @@ static int idefloppy_get_capacity (ide_drive_t *drive) "in drive\n", drive->name); break; } - } - if (!i) { - debug_log("Descriptor 0 Code: %d\n", descriptor->dc); - } - debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", - i, blocks * length / 1024, blocks, length); + debug_log("Descriptor 0 Code: %d\n", + pc.buf[desc_start + 4] & 0x03); } /* Clik! disk does not support get_flexible_disk_page */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { - (void) idefloppy_get_flexible_disk_page(drive); - } + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) + (void) ide_floppy_get_flexible_disk_page(drive); set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); return rc; } /* -** Obtain the list of formattable capacities. -** Very similar to idefloppy_get_capacity, except that we push the capacity -** descriptors to userland, instead of our own structures. -** -** Userland gives us the following structure: -** -** struct idefloppy_format_capacities { -** int nformats; -** struct { -** int nblocks; -** int blocksize; -** } formats[]; -** } ; -** -** userland initializes nformats to the number of allocated formats[] -** records. On exit we set nformats to the number of records we've -** actually initialized. -** -*/ - -static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) + * Obtain the list of formattable capacities. + * Very similar to ide_floppy_get_capacity, except that we push the capacity + * descriptors to userland, instead of our own structures. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_capacities { + * int nformats; + * struct { + * int nblocks; + * int blocksize; + * } formats[]; + * }; + * + * userland initializes nformats to the number of allocated formats[] records. + * On exit we set nformats to the number of records we've actually initialized. + */ + +static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) { - idefloppy_pc_t pc; - idefloppy_capacity_header_t *header; - idefloppy_capacity_descriptor_t *descriptor; - int i, descriptors, blocks, length; - int u_array_size; - int u_index; + struct ide_atapi_pc pc; + u8 header_len, desc_cnt; + int i, blocks, length, u_array_size, u_index; int __user *argp; if (get_user(u_array_size, arg)) @@ -1344,30 +1102,27 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) idefloppy_create_read_capacity_cmd(&pc); if (idefloppy_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); - return (-EIO); - } - header = (idefloppy_capacity_header_t *) pc.buffer; - descriptors = header->length / - sizeof(idefloppy_capacity_descriptor_t); - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); + return (-EIO); + } + header_len = pc.buf[3]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ u_index = 0; argp = arg + 1; /* - ** We always skip the first capacity descriptor. That's the - ** current capacity. We are interested in the remaining descriptors, - ** the formattable capacities. - */ + * We always skip the first capacity descriptor. That's the current + * capacity. We are interested in the remaining descriptors, the + * formattable capacities. + */ + for (i = 1; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; - for (i=0; i= u_array_size) break; /* User-supplied buffer too small */ - if (i == 0) - continue; /* Skip the first descriptor */ - blocks = be32_to_cpu(descriptor->blocks); - length = be16_to_cpu(descriptor->length); + blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); if (put_user(blocks, argp)) return(-EFAULT); @@ -1386,78 +1141,38 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) } /* -** Send ATAPI_FORMAT_UNIT to the drive. -** -** Userland gives us the following structure: -** -** struct idefloppy_format_command { -** int nblocks; -** int blocksize; -** int flags; -** } ; -** -** flags is a bitmask, currently, the only defined flag is: -** -** 0x01 - verify media after format. -*/ - -static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg) -{ - int blocks; - int length; - int flags; - idefloppy_pc_t pc; - - if (get_user(blocks, arg) || - get_user(length, arg+1) || - get_user(flags, arg+2)) { - return (-EFAULT); - } - - (void) idefloppy_get_sfrp_bit(drive); - idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); - if (idefloppy_queue_pc_tail(drive, &pc)) { - return (-EIO); - } - - return (0); -} - -/* -** Get ATAPI_FORMAT_UNIT progress indication. -** -** Userland gives a pointer to an int. The int is set to a progress -** indicator 0-65536, with 65536=100%. -** -** If the drive does not support format progress indication, we just check -** the dsc bit, and return either 0 or 65536. -*/ + * Get ATAPI_FORMAT_UNIT progress indication. + * + * Userland gives a pointer to an int. The int is set to a progress + * indicator 0-65536, with 65536=100%. + * + * If the drive does not support format progress indication, we just check + * the dsc bit, and return either 0 or 65536. + */ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; int progress_indication = 0x10000; if (floppy->srfp) { idefloppy_create_request_sense_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) { + if (idefloppy_queue_pc_tail(drive, &pc)) return (-EIO); - } if (floppy->sense_key == 2 && floppy->asc == 4 && - floppy->ascq == 4) { + floppy->ascq == 4) progress_indication = floppy->progress_indication; - } - /* Else assume format_unit has finished, and we're - ** at 0x10000 */ + + /* Else assume format_unit has finished, and we're at 0x10000 */ } else { unsigned long flags; u8 stat; local_irq_save(flags); - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); local_irq_restore(flags); progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000; @@ -1468,10 +1183,7 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) return (0); } -/* - * Return the current floppy capacity. - */ -static sector_t idefloppy_capacity (ide_drive_t *drive) +static sector_t idefloppy_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; unsigned long capacity = floppy->blocks * floppy->bs_factor; @@ -1480,72 +1192,44 @@ static sector_t idefloppy_capacity (ide_drive_t *drive) } /* - * idefloppy_identify_device checks if we can support a drive, - * based on the ATAPI IDENTIFY command results. + * Check whether we can support a drive, based on the ATAPI IDENTIFY command + * results. */ -static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) +static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id) { - struct idefloppy_id_gcw gcw; -#if IDEFLOPPY_DEBUG_INFO - char buffer[80]; -#endif /* IDEFLOPPY_DEBUG_INFO */ + u8 gcw[2]; + u8 device_type, protocol, removable, drq_type, packet_size; *((u16 *) &gcw) = id->config; + device_type = gcw[1] & 0x1F; + removable = (gcw[0] & 0x80) >> 7; + protocol = (gcw[1] & 0xC0) >> 6; + drq_type = (gcw[0] & 0x60) >> 5; + packet_size = gcw[0] & 0x03; + #ifdef CONFIG_PPC /* kludge for Apple PowerBook internal zip */ - if ((gcw.device_type == 5) && - !strstr(id->model, "CD-ROM") && - strstr(id->model, "ZIP")) - gcw.device_type = 0; + if (device_type == 5 && + !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP")) + device_type = 0; #endif -#if IDEFLOPPY_DEBUG_INFO - printk(KERN_INFO "Dumping ATAPI Identify Device floppy parameters\n"); - switch (gcw.protocol) { - case 0: case 1: sprintf(buffer, "ATA");break; - case 2: sprintf(buffer, "ATAPI");break; - case 3: sprintf(buffer, "Reserved (Unknown to ide-floppy)");break; - } - printk(KERN_INFO "Protocol Type: %s\n", buffer); - switch (gcw.device_type) { - case 0: sprintf(buffer, "Direct-access Device");break; - case 1: sprintf(buffer, "Streaming Tape Device");break; - case 2: case 3: case 4: sprintf (buffer, "Reserved");break; - case 5: sprintf(buffer, "CD-ROM Device");break; - case 6: sprintf(buffer, "Reserved"); - case 7: sprintf(buffer, "Optical memory Device");break; - case 0x1f: sprintf(buffer, "Unknown or no Device type");break; - default: sprintf(buffer, "Reserved"); - } - printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer); - printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No"); - switch (gcw.drq_type) { - case 0: sprintf(buffer, "Microprocessor DRQ");break; - case 1: sprintf(buffer, "Interrupt DRQ");break; - case 2: sprintf(buffer, "Accelerated DRQ");break; - case 3: sprintf(buffer, "Reserved");break; - } - printk(KERN_INFO "Command Packet DRQ Type: %s\n", buffer); - switch (gcw.packet_size) { - case 0: sprintf(buffer, "12 bytes");break; - case 1: sprintf(buffer, "16 bytes");break; - default: sprintf(buffer, "Reserved");break; - } - printk(KERN_INFO "Command Packet Size: %s\n", buffer); -#endif /* IDEFLOPPY_DEBUG_INFO */ - - if (gcw.protocol != 2) - printk(KERN_ERR "ide-floppy: Protocol is not ATAPI\n"); - else if (gcw.device_type != 0) - printk(KERN_ERR "ide-floppy: Device type is not set to floppy\n"); - else if (!gcw.removable) + if (protocol != 2) + printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n", + protocol); + else if (device_type != 0) + printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set " + "to floppy\n", device_type); + else if (!removable) printk(KERN_ERR "ide-floppy: The removable flag is not set\n"); - else if (gcw.drq_type == 3) { - printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type); - } else if (gcw.packet_size != 0) { - printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n"); - } else + else if (drq_type == 3) + printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not " + "supported\n", drq_type); + else if (packet_size != 0) + printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 " + "bytes\n", packet_size); + else return 1; return 0; } @@ -1555,59 +1239,54 @@ static void idefloppy_add_settings(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; -/* - * drive setting name read/write data type min max mul_factor div_factor data pointer set function - */ - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); - ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL); + ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, + &drive->bios_cyl, NULL); + ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, + &drive->bios_head, NULL); + ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, + &drive->bios_sect, NULL); + ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, + &floppy->ticks, NULL); } #else static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } #endif -/* - * Driver initialization. - */ -static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) +static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) { - struct idefloppy_id_gcw gcw; + u8 gcw[2]; *((u16 *) &gcw) = drive->id->config; floppy->pc = floppy->pc_stack; - if (gcw.drq_type == 1) - set_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags); + + if (((gcw[0] & 0x60) >> 5) == 1) + floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT; /* - * We used to check revisions here. At this point however - * I'm giving up. Just assume they are all broken, its easier. + * We used to check revisions here. At this point however I'm giving up. + * Just assume they are all broken, its easier. * - * The actual reason for the workarounds was likely - * a driver bug after all rather than a firmware bug, - * and the workaround below used to hide it. It should - * be fixed as of version 1.9, but to be on the safe side - * we'll leave the limitation below for the 2.2.x tree. + * The actual reason for the workarounds was likely a driver bug after + * all rather than a firmware bug, and the workaround below used to hide + * it. It should be fixed as of version 1.9, but to be on the safe side + * we'll leave the limitation below for the 2.2.x tree. */ - if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) { - set_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE; /* This value will be visible in the /proc/ide/hdx/settings */ floppy->ticks = IDEFLOPPY_TICKS_DELAY; blk_queue_max_sectors(drive->queue, 64); } /* - * Guess what? The IOMEGA Clik! drive also needs the - * above fix. It makes nasty clicking noises without - * it, so please don't remove this. - */ + * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes + * nasty clicking noises without it, so please don't remove this. + */ if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) { blk_queue_max_sectors(drive->queue, 64); - set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE; } - - (void) idefloppy_get_capacity(drive); + (void) ide_floppy_get_capacity(drive); idefloppy_add_settings(drive); } @@ -1636,19 +1315,19 @@ static void idefloppy_cleanup_obj(struct kref *kref) } #ifdef CONFIG_IDE_PROC_FS -static int proc_idefloppy_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, + int count, int *eof, void *data) { ide_drive_t*drive = (ide_drive_t *)data; int len; - len = sprintf(page,"%llu\n", (long long)idefloppy_capacity(drive)); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive)); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static ide_proc_entry_t idefloppy_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, + { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, + { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, { NULL, 0, NULL, NULL } }; #endif /* CONFIG_IDE_PROC_FS */ @@ -1667,7 +1346,7 @@ static ide_driver_t idefloppy_driver = { .media = ide_floppy, .supports_dsc_overlap = 0, .do_request = idefloppy_do_request, - .end_request = idefloppy_do_end_request, + .end_request = idefloppy_end_request, .error = __ide_error, .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS @@ -1680,12 +1359,13 @@ static int idefloppy_open(struct inode *inode, struct file *filp) struct gendisk *disk = inode->i_bdev->bd_disk; struct ide_floppy_obj *floppy; ide_drive_t *drive; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; int ret = 0; debug_log("Reached %s\n", __func__); - if (!(floppy = ide_floppy_get(disk))) + floppy = ide_floppy_get(disk); + if (!floppy) return -ENXIO; drive = floppy->drive; @@ -1693,7 +1373,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp) floppy->openers++; if (floppy->openers == 1) { - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; /* Just in case */ idefloppy_create_test_unit_ready_cmd(&pc); @@ -1702,13 +1382,13 @@ static int idefloppy_open(struct inode *inode, struct file *filp) (void) idefloppy_queue_pc_tail(drive, &pc); } - if (idefloppy_get_capacity (drive) + if (ide_floppy_get_capacity(drive) && (filp->f_flags & O_NDELAY) == 0 /* - ** Allow O_NDELAY to open a drive without a disk, or with - ** an unreadable disk, so that we can get the format - ** capacity of the drive or begin the format - Sam - */ + * Allow O_NDELAY to open a drive without a disk, or with an + * unreadable disk, so that we can get the format capacity + * of the drive or begin the format - Sam + */ ) { ret = -EIO; goto out_put_floppy; @@ -1718,14 +1398,14 @@ static int idefloppy_open(struct inode *inode, struct file *filp) ret = -EROFS; goto out_put_floppy; } - set_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_MEDIA_CHANGED; /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { idefloppy_create_prevent_cmd(&pc, 1); (void) idefloppy_queue_pc_tail(drive, &pc); } check_disk_change(inode->i_bdev); - } else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) { + } else if (floppy->flags & IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS) { ret = -EBUSY; goto out_put_floppy; } @@ -1742,18 +1422,18 @@ static int idefloppy_release(struct inode *inode, struct file *filp) struct gendisk *disk = inode->i_bdev->bd_disk; struct ide_floppy_obj *floppy = ide_floppy_g(disk); ide_drive_t *drive = floppy->drive; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; debug_log("Reached %s\n", __func__); if (floppy->openers == 1) { /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { idefloppy_create_prevent_cmd(&pc, 0); (void) idefloppy_queue_pc_tail(drive, &pc); } - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; } floppy->openers--; @@ -1774,64 +1454,105 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } +static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, + struct ide_atapi_pc *pc, unsigned long arg, unsigned int cmd) +{ + if (floppy->openers > 1) + return -EBUSY; + + /* The IOMEGA Clik! Drive doesn't support this command - + * no room for an eject mechanism */ + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { + int prevent = arg ? 1 : 0; + + if (cmd == CDROMEJECT) + prevent = 0; + + idefloppy_create_prevent_cmd(pc, prevent); + (void) idefloppy_queue_pc_tail(floppy->drive, pc); + } + + if (cmd == CDROMEJECT) { + idefloppy_create_start_stop_cmd(pc, 2); + (void) idefloppy_queue_pc_tail(floppy->drive, pc); + } + + return 0; +} + +static int ide_floppy_format_unit(idefloppy_floppy_t *floppy, + int __user *arg) +{ + int blocks, length, flags, err = 0; + struct ide_atapi_pc pc; + + if (floppy->openers > 1) { + /* Don't format if someone is using the disk */ + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; + return -EBUSY; + } + + floppy->flags |= IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; + + /* + * Send ATAPI_FORMAT_UNIT to the drive. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_command { + * int nblocks; + * int blocksize; + * int flags; + * } ; + * + * flags is a bitmask, currently, the only defined flag is: + * + * 0x01 - verify media after format. + */ + if (get_user(blocks, arg) || + get_user(length, arg+1) || + get_user(flags, arg+2)) { + err = -EFAULT; + goto out; + } + + (void) idefloppy_get_sfrp_bit(floppy->drive); + idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); + + if (idefloppy_queue_pc_tail(floppy->drive, &pc)) + err = -EIO; + +out: + if (err) + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; + return err; +} + + static int idefloppy_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct block_device *bdev = inode->i_bdev; struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); ide_drive_t *drive = floppy->drive; + struct ide_atapi_pc pc; void __user *argp = (void __user *)arg; int err; - int prevent = (arg) ? 1 : 0; - idefloppy_pc_t pc; switch (cmd) { case CDROMEJECT: - prevent = 0; /* fall through */ case CDROM_LOCKDOOR: - if (floppy->openers > 1) - return -EBUSY; - - /* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { - idefloppy_create_prevent_cmd(&pc, prevent); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - if (cmd == CDROMEJECT) { - idefloppy_create_start_stop_cmd(&pc, 2); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - return 0; + return ide_floppy_lockdoor(floppy, &pc, arg, cmd); case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: return 0; case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: - return idefloppy_get_format_capacities(drive, argp); + return ide_floppy_get_format_capacities(drive, argp); case IDEFLOPPY_IOCTL_FORMAT_START: - if (!(file->f_mode & 2)) return -EPERM; - if (floppy->openers > 1) { - /* Don't format if someone is using the disk */ - - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, - &floppy->flags); - return -EBUSY; - } - - set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); - - err = idefloppy_begin_format(drive, argp); - if (err) - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); - return err; - /* - ** Note, the bit will be cleared when the device is - ** closed. This is the cleanest way to handle the - ** situation where the drive does not support - ** format progress reporting. - */ + return ide_floppy_format_unit(floppy, (int __user *)arg); case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS: return idefloppy_get_format_progress(drive, argp); } @@ -1856,13 +1577,16 @@ static int idefloppy_media_changed(struct gendisk *disk) { struct ide_floppy_obj *floppy = ide_floppy_g(disk); ide_drive_t *drive = floppy->drive; + int ret; /* do not scan partitions twice if this is a removable device */ if (drive->attach) { drive->attach = 0; return 0; } - return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags); + ret = !!(floppy->flags & IDEFLOPPY_FLAG_MEDIA_CHANGED); + floppy->flags &= ~IDEFLOPPY_FLAG_MEDIA_CHANGED; + return ret; } static int idefloppy_revalidate_disk(struct gendisk *disk) @@ -1873,13 +1597,13 @@ static int idefloppy_revalidate_disk(struct gendisk *disk) } static struct block_device_operations idefloppy_ops = { - .owner = THIS_MODULE, - .open = idefloppy_open, - .release = idefloppy_release, - .ioctl = idefloppy_ioctl, - .getgeo = idefloppy_getgeo, - .media_changed = idefloppy_media_changed, - .revalidate_disk= idefloppy_revalidate_disk + .owner = THIS_MODULE, + .open = idefloppy_open, + .release = idefloppy_release, + .ioctl = idefloppy_ioctl, + .getgeo = idefloppy_getgeo, + .media_changed = idefloppy_media_changed, + .revalidate_disk = idefloppy_revalidate_disk }; static int ide_floppy_probe(ide_drive_t *drive) @@ -1893,16 +1617,20 @@ static int ide_floppy_probe(ide_drive_t *drive) goto failed; if (drive->media != ide_floppy) goto failed; - if (!idefloppy_identify_device (drive, drive->id)) { - printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name); + if (!idefloppy_identify_device(drive, drive->id)) { + printk(KERN_ERR "ide-floppy: %s: not supported by this version" + " of ide-floppy\n", drive->name); goto failed; } if (drive->scsi) { - printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name); + printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi" + " emulation.\n", drive->name); goto failed; } - if ((floppy = kzalloc(sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) { - printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name); + floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL); + if (!floppy) { + printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy" + " structure\n", drive->name); goto failed; } @@ -1924,7 +1652,7 @@ static int ide_floppy_probe(ide_drive_t *drive) drive->driver_data = floppy; - idefloppy_setup (drive, floppy); + idefloppy_setup(drive, floppy); g->minors = 1 << PARTN_BITS; g->driverfs_dev = &drive->gendev; @@ -1940,9 +1668,7 @@ failed: return -ENODEV; } -MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); - -static void __exit idefloppy_exit (void) +static void __exit idefloppy_exit(void) { driver_unregister(&idefloppy_driver.gen_driver); } @@ -1957,3 +1683,5 @@ MODULE_ALIAS("ide:*m-floppy*"); module_init(idefloppy_init); module_exit(idefloppy_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); +