X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fhwmon%2Flm90.c;h=1aff7575799d57d2ad5837c54c46bd8d5a65fd1a;hb=ecca1c5e3a55d1581be9aa9144642c67de70e33b;hp=ff7ba1e1bcc7a916a40599095ceed43d459af544;hpb=cdaf79349c7d24e1d33acb6497849c9e956a33ea;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index ff7ba1e..1aff757 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -1,55 +1,51 @@ /* * lm90.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2005 Jean Delvare + * Copyright (C) 2003-2008 Jean Delvare * * Based on the lm83 driver. The LM90 is a sensor chip made by National * Semiconductor. It reports up to two temperatures (its own plus up to * one external one) with a 0.125 deg resolution (1 deg for local - * temperature) and a 3-4 deg accuracy. Complete datasheet can be - * obtained from National's website at: - * http://www.national.com/pf/LM/LM90.html + * temperature) and a 3-4 deg accuracy. * * This driver also supports the LM89 and LM99, two other sensor chips * made by National Semiconductor. Both have an increased remote * temperature measurement accuracy (1 degree), and the LM99 * additionally shifts remote temperatures (measured and limits) by 16 - * degrees, which allows for higher temperatures measurement. The - * driver doesn't handle it since it can be done easily in user-space. - * Complete datasheets can be obtained from National's website at: - * http://www.national.com/pf/LM/LM89.html - * http://www.national.com/pf/LM/LM99.html + * degrees, which allows for higher temperatures measurement. * Note that there is no way to differentiate between both chips. + * When device is auto-detected, the driver will assume an LM99. * * This driver also supports the LM86, another sensor chip made by * National Semiconductor. It is exactly similar to the LM90 except it * has a higher accuracy. - * Complete datasheet can be obtained from National's website at: - * http://www.national.com/pf/LM/LM86.html * * This driver also supports the ADM1032, a sensor chip made by Analog * Devices. That chip is similar to the LM90, with a few differences - * that are not handled by this driver. Complete datasheet can be - * obtained from Analog's website at: - * http://www.analog.com/en/prod/0,2877,ADM1032,00.html - * Among others, it has a higher accuracy than the LM90, much like the - * LM86 does. + * that are not handled by this driver. Among others, it has a higher + * accuracy than the LM90, much like the LM86 does. * * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor - * chips made by Maxim. These chips are similar to the LM86. Complete - * datasheet can be obtained at Maxim's website at: - * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + * chips made by Maxim. These chips are similar to the LM86. * Note that there is no easy way to differentiate between the three * variants. The extra address and features of the MAX6659 are not - * supported by this driver. + * supported by this driver. These chips lack the remote temperature + * offset feature. * - * This driver also supports the ADT7461 chip from Analog Devices but - * only in its "compatability mode". If an ADT7461 chip is found but - * is configured in non-compatible mode (where its temperature - * register values are decoded differently) it is ignored by this - * driver. Complete datasheet can be obtained from Analog's website - * at: - * http://www.analog.com/en/prod/0,2877,ADT7461,00.html + * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and + * MAX6692 chips made by Maxim. These are again similar to the LM86, + * but they use unsigned temperature values and can report temperatures + * from 0 to 145 degrees. + * + * This driver also supports the MAX6680 and MAX6681, two other sensor + * chips made by Maxim. These are quite similar to the other Maxim + * chips. The MAX6680 and MAX6681 only differ in the pinout so they can + * be treated identically. + * + * This driver also supports the ADT7461 chip from Analog Devices. + * It's supported in both compatibility and extended mode. It is mostly + * compatible with LM90 except for a data format difference for the + * temperature value registers. * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -78,24 +74,31 @@ #include #include #include +#include +#include /* * Addresses to scan * Address is fully defined internally and cannot be changed except for - * MAX6659. - * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658 - * have address 0x4c. - * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d. + * MAX6659, MAX6680 and MAX6681. + * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657 + * and MAX6658 have address 0x4c. + * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d. + * MAX6647 has address 0x4e. * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported). + * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, + * 0x4c, 0x4d or 0x4e. */ -static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { + 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; /* * Insmod parameters */ -I2C_CLIENT_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461); +I2C_CLIENT_INSMOD_8(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, + max6646); /* * The LM90 registers @@ -136,63 +139,60 @@ I2C_CLIENT_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461); #define LM90_REG_R_TCRIT_HYST 0x21 #define LM90_REG_W_TCRIT_HYST 0x21 -/* - * Conversions and various macros - * For local temperatures and limits, critical limits and the hysteresis - * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius. - * For remote temperatures and limits, it uses signed 11-bit values with - * LSB = 0.125 degree Celsius, left-justified in 16-bit registers. - */ +/* MAX6646/6647/6649/6657/6658/6659 registers */ -#define TEMP1_FROM_REG(val) ((val) * 1000) -#define TEMP1_TO_REG(val) ((val) <= -128000 ? -128 : \ - (val) >= 127000 ? 127 : \ - (val) < 0 ? ((val) - 500) / 1000 : \ - ((val) + 500) / 1000) -#define TEMP2_FROM_REG(val) ((val) / 32 * 125) -#define TEMP2_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ - (val) >= 127875 ? 0x7FE0 : \ - (val) < 0 ? ((val) - 62) / 125 * 32 : \ - ((val) + 62) / 125 * 32) -#define HYST_TO_REG(val) ((val) <= 0 ? 0 : (val) >= 30500 ? 31 : \ - ((val) + 500) / 1000) - -/* - * ADT7461 is almost identical to LM90 except that attempts to write - * values that are outside the range 0 < temp < 127 are treated as - * the boundary value. - */ +#define MAX6657_REG_R_LOCAL_TEMPL 0x11 -#define TEMP1_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \ - (val) >= 127000 ? 127 : \ - ((val) + 500) / 1000) -#define TEMP2_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \ - (val) >= 127750 ? 0x7FC0 : \ - ((val) + 125) / 250 * 64) +/* + * Device flags + */ +#define LM90_FLAG_ADT7461_EXT 0x01 /* ADT7461 extended mode */ /* * Functions declaration */ -static int lm90_attach_adapter(struct i2c_adapter *adapter); -static int lm90_detect(struct i2c_adapter *adapter, int address, - int kind); +static int lm90_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int lm90_probe(struct i2c_client *client, + const struct i2c_device_id *id); static void lm90_init_client(struct i2c_client *client); -static int lm90_detach_client(struct i2c_client *client); +static int lm90_remove(struct i2c_client *client); static struct lm90_data *lm90_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm90_id[] = { + { "adm1032", adm1032 }, + { "adt7461", adt7461 }, + { "lm90", lm90 }, + { "lm86", lm86 }, + { "lm89", lm86 }, + { "lm99", lm99 }, + { "max6646", max6646 }, + { "max6647", max6646 }, + { "max6649", max6646 }, + { "max6657", max6657 }, + { "max6658", max6657 }, + { "max6659", max6657 }, + { "max6680", max6680 }, + { "max6681", max6680 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm90_id); + static struct i2c_driver lm90_driver = { + .class = I2C_CLASS_HWMON, .driver = { - .owner = THIS_MODULE, .name = "lm90", }, - .id = I2C_DRIVERID_LM90, - .attach_adapter = lm90_attach_adapter, - .detach_client = lm90_detach_client, + .probe = lm90_probe, + .remove = lm90_remove, + .id_table = lm90_id, + .detect = lm90_detect, + .address_data = &addr_data, }; /* @@ -200,27 +200,155 @@ static struct i2c_driver lm90_driver = { */ struct lm90_data { - struct i2c_client client; - struct class_device *class_dev; - struct semaphore update_lock; + struct device *hwmon_dev; + struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ int kind; + int flags; /* registers values */ - s8 temp8[5]; /* 0: local input - 1: local low limit - 2: local high limit - 3: local critical limit - 4: remote critical limit */ - s16 temp11[3]; /* 0: remote input + s8 temp8[4]; /* 0: local low limit + 1: local high limit + 2: local critical limit + 3: remote critical limit */ + s16 temp11[5]; /* 0: remote input 1: remote low limit - 2: remote high limit */ + 2: remote high limit + 3: remote offset (except max6646 and max6657) + 4: local input */ u8 temp_hyst; u8 alarms; /* bitvector */ }; /* + * Conversions + * For local temperatures and limits, critical limits and the hysteresis + * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius. + * For remote temperatures and limits, it uses signed 11-bit values with + * LSB = 0.125 degree Celsius, left-justified in 16-bit registers. Some + * Maxim chips use unsigned values. + */ + +static inline int temp_from_s8(s8 val) +{ + return val * 1000; +} + +static inline int temp_from_u8(u8 val) +{ + return val * 1000; +} + +static inline int temp_from_s16(s16 val) +{ + return val / 32 * 125; +} + +static inline int temp_from_u16(u16 val) +{ + return val / 32 * 125; +} + +static s8 temp_to_s8(long val) +{ + if (val <= -128000) + return -128; + if (val >= 127000) + return 127; + if (val < 0) + return (val - 500) / 1000; + return (val + 500) / 1000; +} + +static u8 temp_to_u8(long val) +{ + if (val <= 0) + return 0; + if (val >= 255000) + return 255; + return (val + 500) / 1000; +} + +static s16 temp_to_s16(long val) +{ + if (val <= -128000) + return 0x8000; + if (val >= 127875) + return 0x7FE0; + if (val < 0) + return (val - 62) / 125 * 32; + return (val + 62) / 125 * 32; +} + +static u8 hyst_to_reg(long val) +{ + if (val <= 0) + return 0; + if (val >= 30500) + return 31; + return (val + 500) / 1000; +} + +/* + * ADT7461 in compatibility mode is almost identical to LM90 except that + * attempts to write values that are outside the range 0 < temp < 127 are + * treated as the boundary value. + * + * ADT7461 in "extended mode" operation uses unsigned integers offset by + * 64 (e.g., 0 -> -64 degC). The range is restricted to -64..191 degC. + */ +static inline int temp_from_u8_adt7461(struct lm90_data *data, u8 val) +{ + if (data->flags & LM90_FLAG_ADT7461_EXT) + return (val - 64) * 1000; + else + return temp_from_s8(val); +} + +static inline int temp_from_u16_adt7461(struct lm90_data *data, u16 val) +{ + if (data->flags & LM90_FLAG_ADT7461_EXT) + return (val - 0x4000) / 64 * 250; + else + return temp_from_s16(val); +} + +static u8 temp_to_u8_adt7461(struct lm90_data *data, long val) +{ + if (data->flags & LM90_FLAG_ADT7461_EXT) { + if (val <= -64000) + return 0; + if (val >= 191000) + return 0xFF; + return (val + 500 + 64000) / 1000; + } else { + if (val <= 0) + return 0; + if (val >= 127000) + return 127; + return (val + 500) / 1000; + } +} + +static u16 temp_to_u16_adt7461(struct lm90_data *data, long val) +{ + if (data->flags & LM90_FLAG_ADT7461_EXT) { + if (val <= -64000) + return 0; + if (val >= 191750) + return 0xFFC0; + return (val + 64000 + 125) / 250 * 64; + } else { + if (val <= 0) + return 0; + if (val >= 127750) + return 0x7FC0; + return (val + 125) / 250 * 64; + } +} + +/* * Sysfs stuff */ @@ -229,7 +357,20 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index])); + int temp; + + if (data->kind == adt7461) + temp = temp_from_u8_adt7461(data, data->temp8[attr->index]); + else if (data->kind == max6646) + temp = temp_from_u8(data->temp8[attr->index]); + else + temp = temp_from_s8(data->temp8[attr->index]); + + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index == 3) + temp += 16000; + + return sprintf(buf, "%d\n", temp); } static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, @@ -248,13 +389,19 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, long val = simple_strtol(buf, NULL, 10); int nr = attr->index; - down(&data->update_lock); + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index == 3) + val -= 16000; + + mutex_lock(&data->update_lock); if (data->kind == adt7461) - data->temp8[nr] = TEMP1_TO_REG_ADT7461(val); + data->temp8[nr] = temp_to_u8_adt7461(data, val); + else if (data->kind == max6646) + data->temp8[nr] = temp_to_u8(val); else - data->temp8[nr] = TEMP1_TO_REG(val); - i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]); - up(&data->update_lock); + data->temp8[nr] = temp_to_s8(val); + i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]); + mutex_unlock(&data->update_lock); return count; } @@ -263,17 +410,32 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", TEMP2_FROM_REG(data->temp11[attr->index])); + int temp; + + if (data->kind == adt7461) + temp = temp_from_u16_adt7461(data, data->temp11[attr->index]); + else if (data->kind == max6646) + temp = temp_from_u16(data->temp11[attr->index]); + else + temp = temp_from_s16(data->temp11[attr->index]); + + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index <= 2) + temp += 16000; + + return sprintf(buf, "%d\n", temp); } static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { - static const u8 reg[4] = { + static const u8 reg[6] = { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, + LM90_REG_W_REMOTE_OFFSH, + LM90_REG_W_REMOTE_OFFSL, }; struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -282,16 +444,27 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, long val = simple_strtol(buf, NULL, 10); int nr = attr->index; - down(&data->update_lock); + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index <= 2) + val -= 16000; + + mutex_lock(&data->update_lock); if (data->kind == adt7461) - data->temp11[nr] = TEMP2_TO_REG_ADT7461(val); + data->temp11[nr] = temp_to_u16_adt7461(data, val); + else if (data->kind == max6657 || data->kind == max6680) + data->temp11[nr] = temp_to_s8(val) << 8; + else if (data->kind == max6646) + data->temp11[nr] = temp_to_u8(val) << 8; else - data->temp11[nr] = TEMP2_TO_REG(val); + data->temp11[nr] = temp_to_s16(val); + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], data->temp11[nr] >> 8); - i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], - data->temp11[nr] & 0xff); - up(&data->update_lock); + if (data->kind != max6657 && data->kind != max6680 + && data->kind != max6646) + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], + data->temp11[nr] & 0xff); + mutex_unlock(&data->update_lock); return count; } @@ -300,8 +473,20 @@ static ssize_t show_temphyst(struct device *dev, struct device_attribute *devatt { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index]) - - TEMP1_FROM_REG(data->temp_hyst)); + int temp; + + if (data->kind == adt7461) + temp = temp_from_u8_adt7461(data, data->temp8[attr->index]); + else if (data->kind == max6646) + temp = temp_from_u8(data->temp8[attr->index]); + else + temp = temp_from_s8(data->temp8[attr->index]); + + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index == 3) + temp += 16000; + + return sprintf(buf, "%d\n", temp - temp_from_s8(data->temp_hyst)); } static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, @@ -310,13 +495,20 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, struct i2c_client *client = to_i2c_client(dev); struct lm90_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - long hyst; + int temp; + + mutex_lock(&data->update_lock); + if (data->kind == adt7461) + temp = temp_from_u8_adt7461(data, data->temp8[2]); + else if (data->kind == max6646) + temp = temp_from_u8(data->temp8[2]); + else + temp = temp_from_s8(data->temp8[2]); - down(&data->update_lock); - hyst = TEMP1_FROM_REG(data->temp8[3]) - val; + data->temp_hyst = hyst_to_reg(temp - val); i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, - HYST_TO_REG(hyst)); - up(&data->update_lock); + data->temp_hyst); + mutex_unlock(&data->update_lock); return count; } @@ -327,25 +519,74 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, return sprintf(buf, "%d\n", data->alarms); } -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); +static ssize_t show_alarm(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm90_data *data = lm90_update_device(dev); + int bitnr = attr->index; + + return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 4); static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 1); + set_temp8, 0); static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 1); static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 2); + set_temp8, 1); static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 2); static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 3); + set_temp8, 2); static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 4); + set_temp8, 3); static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst, - set_temphyst, 3); -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4); + set_temphyst, 2); +static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 3); +static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 3); + +/* Individual alarm files */ +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); +/* Raw alarm file for compatibility */ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static struct attribute *lm90_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group lm90_group = { + .attrs = lm90_attributes, +}; + /* pec used for ADM1032 only */ static ssize_t show_pec(struct device *dev, struct device_attribute *dummy, char *buf) @@ -381,7 +622,7 @@ static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec); */ /* The ADM1032 supports PEC but not on write byte transactions, so we need - to explicitely ask for a transaction without PEC. */ + to explicitly ask for a transaction without PEC. */ static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value) { return i2c_smbus_xfer(client->adapter, client->addr, @@ -414,40 +655,16 @@ static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value) return 0; } -static int lm90_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm90_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm90_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm90_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; + int address = new_client->addr; const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - LM90-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm90_driver; - new_client->flags = 0; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -465,24 +682,25 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) kind = lm90; if (kind < 0) { /* detection and identification */ - u8 man_id, chip_id, reg_config1, reg_convrate; - - if (lm90_read_reg(new_client, LM90_REG_R_MAN_ID, - &man_id) < 0 - || lm90_read_reg(new_client, LM90_REG_R_CHIP_ID, - &chip_id) < 0 - || lm90_read_reg(new_client, LM90_REG_R_CONFIG1, - ®_config1) < 0 - || lm90_read_reg(new_client, LM90_REG_R_CONVRATE, - ®_convrate) < 0) - goto exit_free; + int man_id, chip_id, reg_config1, reg_convrate; + + if ((man_id = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_MAN_ID)) < 0 + || (chip_id = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CHIP_ID)) < 0 + || (reg_config1 = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONFIG1)) < 0 + || (reg_convrate = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONVRATE)) < 0) + return -ENODEV; - if (man_id == 0x01) { /* National Semiconductor */ - u8 reg_config2; + if ((address == 0x4C || address == 0x4D) + && man_id == 0x01) { /* National Semiconductor */ + int reg_config2; - if (lm90_read_reg(new_client, LM90_REG_R_CONFIG2, - ®_config2) < 0) - goto exit_free; + if ((reg_config2 = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONFIG2)) < 0) + return -ENODEV; if ((reg_config1 & 0x2A) == 0x00 && (reg_config2 & 0xF8) == 0x00 @@ -493,6 +711,15 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) } else if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */ kind = lm99; + dev_info(&adapter->dev, + "Assuming LM99 chip at " + "0x%02x\n", address); + dev_info(&adapter->dev, + "If it is an LM89, pass " + "force_lm86=%d,0x%02x when " + "loading the lm90 driver\n", + i2c_adapter_id(adapter), + address); } else if (address == 0x4C && (chip_id & 0xF0) == 0x10) { /* LM86 */ @@ -500,43 +727,67 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) } } } else - if (man_id == 0x41) { /* Analog Devices */ + if ((address == 0x4C || address == 0x4D) + && man_id == 0x41) { /* Analog Devices */ if ((chip_id & 0xF0) == 0x40 /* ADM1032 */ && (reg_config1 & 0x3F) == 0x00 && reg_convrate <= 0x0A) { kind = adm1032; } else if (chip_id == 0x51 /* ADT7461 */ - && (reg_config1 & 0x1F) == 0x00 /* check compat mode */ + && (reg_config1 & 0x1B) == 0x00 && reg_convrate <= 0x0A) { kind = adt7461; } } else if (man_id == 0x4D) { /* Maxim */ /* - * The Maxim variants do NOT have a chip_id register. - * Reading from that address will return the last read - * value, which in our case is those of the man_id - * register. Likewise, the config1 register seems to - * lack a low nibble, so the value will be those of the - * previous read, so in our case those of the man_id - * register. + * The MAX6657, MAX6658 and MAX6659 do NOT have a + * chip_id register. Reading from that address will + * return the last read value, which in our case is + * those of the man_id register. Likewise, the config1 + * register seems to lack a low nibble, so the value + * will be those of the previous read, so in our case + * those of the man_id register. */ if (chip_id == man_id + && (address == 0x4C || address == 0x4D) && (reg_config1 & 0x1F) == (man_id & 0x0F) && reg_convrate <= 0x09) { kind = max6657; + } else + /* The chip_id register of the MAX6680 and MAX6681 + * holds the revision of the chip. + * the lowest bit of the config1 register is unused + * and should return zero when read, so should the + * second to last bit of config1 (software reset) + */ + if (chip_id == 0x01 + && (reg_config1 & 0x03) == 0x00 + && reg_convrate <= 0x07) { + kind = max6680; + } else + /* The chip_id register of the MAX6646/6647/6649 + * holds the revision of the chip. + * The lowest 6 bits of the config1 register are + * unused and should return zero when read. + */ + if (chip_id == 0x59 + && (reg_config1 & 0x3f) == 0x00 + && reg_convrate <= 0x07) { + kind = max6646; } } if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + dev_dbg(&adapter->dev, + "Unsupported chip at 0x%02x (man_id=0x%02X, " + "chip_id=0x%02X)\n", address, man_id, chip_id); + return -ENODEV; } } + /* Fill the i2c board info */ if (kind == lm90) { name = "lm90"; } else if (kind == adm1032) { @@ -544,66 +795,75 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) /* The ADM1032 supports PEC, but only if combined transactions are not used. */ if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) - new_client->flags |= I2C_CLIENT_PEC; + info->flags |= I2C_CLIENT_PEC; } else if (kind == lm99) { name = "lm99"; } else if (kind == lm86) { name = "lm86"; } else if (kind == max6657) { name = "max6657"; + } else if (kind == max6680) { + name = "max6680"; } else if (kind == adt7461) { name = "adt7461"; + } else if (kind == max6646) { + name = "max6646"; } + strlcpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - data->kind = kind; - init_MUTEX(&data->update_lock); +static int lm90_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(new_client->dev.parent); + struct lm90_data *data; + int err; - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; + data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + i2c_set_clientdata(new_client, data); + mutex_init(&data->update_lock); + + /* Set the device type */ + data->kind = id->driver_data; + if (data->kind == adm1032) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + new_client->flags &= ~I2C_CLIENT_PEC; + } /* Initialize the LM90 chip */ lm90_init_client(new_client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); - goto exit_detach; + if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group))) + goto exit_free; + if (new_client->flags & I2C_CLIENT_PEC) { + if ((err = device_create_file(&new_client->dev, + &dev_attr_pec))) + goto exit_remove_files; + } + if (data->kind != max6657 && data->kind != max6646) { + if ((err = device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_offset.dev_attr))) + goto exit_remove_files; } - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_crit_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit_hyst.dev_attr); - device_create_file(&new_client->dev, &dev_attr_alarms); - - if (new_client->flags & I2C_CLIENT_PEC) - device_create_file(&new_client->dev, &dev_attr_pec); + data->hwmon_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove_files; + } return 0; -exit_detach: - i2c_detach_client(new_client); +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &lm90_group); + device_remove_file(&new_client->dev, &dev_attr_pec); exit_free: kfree(data); exit: @@ -612,7 +872,8 @@ exit: static void lm90_init_client(struct i2c_client *client) { - u8 config; + u8 config, config_orig; + struct lm90_data *data = i2c_get_clientdata(client); /* * Start the conversions. @@ -623,22 +884,72 @@ static void lm90_init_client(struct i2c_client *client) dev_warn(&client->dev, "Initialization failed!\n"); return; } - if (config & 0x40) - i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, - config & 0xBF); /* run */ + config_orig = config; + + /* Check Temperature Range Select */ + if (data->kind == adt7461) { + if (config & 0x04) + data->flags |= LM90_FLAG_ADT7461_EXT; + } + + /* + * Put MAX6680/MAX8881 into extended resolution (bit 0x10, + * 0.125 degree resolution) and range (0x08, extend range + * to -64 degree) mode for the remote temperature sensor. + */ + if (data->kind == max6680) { + config |= 0x18; + } + + config &= 0xBF; /* run */ + if (config != config_orig) /* Only write if changed */ + i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); } -static int lm90_detach_client(struct i2c_client *client) +static int lm90_remove(struct i2c_client *client) { struct lm90_data *data = i2c_get_clientdata(client); - int err; - hwmon_device_unregister(data->class_dev); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &lm90_group); + device_remove_file(&client->dev, &dev_attr_pec); + if (data->kind != max6657 && data->kind != max6646) + device_remove_file(&client->dev, + &sensor_dev_attr_temp2_offset.dev_attr); + + kfree(data); + return 0; +} + +static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value) +{ + int err; + u8 oldh, newh, l; - if ((err = i2c_detach_client(client))) + /* + * There is a trick here. We have to read two registers to have the + * sensor temperature, but we have to beware a conversion could occur + * inbetween the readings. The datasheet says we should either use + * the one-shot conversion register, which we don't want to do + * (disables hardware monitoring) or monitor the busy bit, which is + * impossible (we can't read the values and monitor that bit at the + * exact same time). So the solution used here is to read the high + * byte once, then the low byte, then the high byte again. If the new + * high byte matches the old one, then we have a valid reading. Else + * we have to read the low byte again, and now we believe we have a + * correct reading. + */ + if ((err = lm90_read_reg(client, regh, &oldh)) + || (err = lm90_read_reg(client, regl, &l)) + || (err = lm90_read_reg(client, regh, &newh))) return err; + if (oldh != newh) { + err = lm90_read_reg(client, regl, &l); + if (err) + return err; + } + *value = (newh << 8) | l; - kfree(data); return 0; } @@ -647,53 +958,61 @@ static struct lm90_data *lm90_update_device(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct lm90_data *data = i2c_get_clientdata(client); - down(&data->update_lock); + mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { - u8 oldh, newh, l; + u8 h, l; dev_dbg(&client->dev, "Updating lm90 data.\n"); - lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, &data->temp8[0]); - lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[1]); - lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[2]); - lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[3]); - lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[4]); + lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]); + lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[1]); + lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[2]); + lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]); lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst); - /* - * There is a trick here. We have to read two registers to - * have the remote sensor temperature, but we have to beware - * a conversion could occur inbetween the readings. The - * datasheet says we should either use the one-shot - * conversion register, which we don't want to do (disables - * hardware monitoring) or monitor the busy bit, which is - * impossible (we can't read the values and monitor that bit - * at the exact same time). So the solution used here is to - * read the high byte once, then the low byte, then the high - * byte again. If the new high byte matches the old one, - * then we have a valid reading. Else we have to read the low - * byte again, and now we believe we have a correct reading. - */ - if (lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &oldh) == 0 - && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0 - && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &newh) == 0 - && (newh == oldh - || lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0)) - data->temp11[0] = (newh << 8) | l; - - if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &newh) == 0 - && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL, &l) == 0) - data->temp11[1] = (newh << 8) | l; - if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &newh) == 0 - && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, &l) == 0) - data->temp11[2] = (newh << 8) | l; + if (data->kind == max6657 || data->kind == max6646) { + lm90_read16(client, LM90_REG_R_LOCAL_TEMP, + MAX6657_REG_R_LOCAL_TEMPL, + &data->temp11[4]); + } else { + if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, + &h) == 0) + data->temp11[4] = h << 8; + } + lm90_read16(client, LM90_REG_R_REMOTE_TEMPH, + LM90_REG_R_REMOTE_TEMPL, &data->temp11[0]); + + if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) == 0) { + data->temp11[1] = h << 8; + if (data->kind != max6657 && data->kind != max6680 + && data->kind != max6646 + && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL, + &l) == 0) + data->temp11[1] |= l; + } + if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) == 0) { + data->temp11[2] = h << 8; + if (data->kind != max6657 && data->kind != max6680 + && data->kind != max6646 + && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, + &l) == 0) + data->temp11[2] |= l; + } + + if (data->kind != max6657 && data->kind != max6646) { + if (lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSH, + &h) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL, + &l) == 0) + data->temp11[3] = (h << 8) | l; + } lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms); data->last_updated = jiffies; data->valid = 1; } - up(&data->update_lock); + mutex_unlock(&data->update_lock); return data; }