X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fhwmon%2Flis3lv02d.h;h=3e1ff46f72d3ac2cdfde3f3bf1b83637513c42b8;hb=315fe625f878749a7d2b6b65a40c29bbbe6e1dc7;hp=223f1c0763bba4decc69c85e74c990ba4472ba9d;hpb=cfce41a6d643c001d416ead960caf04fae2d609a;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 223f1c0..3e1ff46 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -18,18 +18,25 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/platform_device.h>
+#include <linux/input-polldev.h>
 
 /*
  * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
  * be connected via SPI. There exists also several similar chips (such as LIS302DL or
- * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+ * LIS3L02DQ) and they have slightly different registers, but we can provide a
+ * common interface for all of them.
  * They can also be connected via I²C.
  */
 
-#define LIS3LV02DL_ID	0x3A /* Also the LIS3LV02DQ */
-#define LIS302DL_ID	0x3B /* Also the LIS202DL! */
+#include <linux/lis3lv02d.h>
 
-enum lis3lv02d_reg {
+/* 2-byte registers */
+#define LIS_DOUBLE_ID	0x3A /* LIS3LV02D[LQ] */
+/* 1-byte registers */
+#define LIS_SINGLE_ID	0x3B /* LIS[32]02DL and others */
+
+enum lis3_reg {
 	WHO_AM_I	= 0x0F,
 	OFFSET_X	= 0x16,
 	OFFSET_Y	= 0x17,
@@ -44,10 +51,34 @@ enum lis3lv02d_reg {
 	STATUS_REG	= 0x27,
 	OUTX_L		= 0x28,
 	OUTX_H		= 0x29,
+	OUTX		= 0x29,
 	OUTY_L		= 0x2A,
 	OUTY_H		= 0x2B,
+	OUTY		= 0x2B,
 	OUTZ_L		= 0x2C,
 	OUTZ_H		= 0x2D,
+	OUTZ		= 0x2D,
+};
+
+enum lis302d_reg {
+	FF_WU_CFG_1	= 0x30,
+	FF_WU_SRC_1	= 0x31,
+	FF_WU_THS_1	= 0x32,
+	FF_WU_DURATION_1 = 0x33,
+	FF_WU_CFG_2	= 0x34,
+	FF_WU_SRC_2	= 0x35,
+	FF_WU_THS_2	= 0x36,
+	FF_WU_DURATION_2 = 0x37,
+	CLICK_CFG	= 0x38,
+	CLICK_SRC	= 0x39,
+	CLICK_THSY_X	= 0x3B,
+	CLICK_THSZ	= 0x3C,
+	CLICK_TIMELIMIT	= 0x3D,
+	CLICK_LATENCY	= 0x3E,
+	CLICK_WINDOW	= 0x3F,
+};
+
+enum lis3lv02d_reg {
 	FF_WU_CFG	= 0x30,
 	FF_WU_SRC	= 0x31,
 	FF_WU_ACK	= 0x32,
@@ -84,6 +115,10 @@ enum lis3lv02d_ctrl2 {
 	CTRL2_FS	= 0x80, /* Full Scale selection */
 };
 
+enum lis302d_ctrl2 {
+	HP_FF_WU2	= 0x08,
+	HP_FF_WU1	= 0x04,
+};
 
 enum lis3lv02d_ctrl3 {
 	CTRL3_CFS0	= 0x01,
@@ -153,30 +188,37 @@ struct axis_conversion {
 	s8	z;
 };
 
-struct acpi_lis3lv02d {
-	struct acpi_device	*device;   /* The ACPI device */
-	acpi_status (*init) (acpi_handle handle);
-	acpi_status (*write) (acpi_handle handle, int reg, u8 val);
-	acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
+struct lis3lv02d {
+	void			*bus_priv; /* used by the bus layer only */
+	int (*init) (struct lis3lv02d *lis3);
+	int (*write) (struct lis3lv02d *lis3, int reg, u8 val);
+	int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret);
+
+	u8			whoami;    /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
+	s16 (*read_data) (struct lis3lv02d *lis3, int reg);
+	int			mdps_max_val;
 
-	struct input_dev	*idev;     /* input device */
-	struct task_struct	*kthread;  /* kthread for input */
-	struct mutex            lock;
+	struct input_polled_dev	*idev;     /* input device */
 	struct platform_device	*pdev;     /* platform device */
 	atomic_t		count;     /* interrupt count after last read */
 	int			xcalib;    /* calibrated null value for x */
 	int			ycalib;    /* calibrated null value for y */
 	int			zcalib;    /* calibrated null value for z */
-	unsigned char		is_on;     /* whether the device is on or off */
-	unsigned char		usage;     /* usage counter */
 	struct axis_conversion	ac;        /* hw -> logical axis */
+
+	u32			irq;       /* IRQ number */
+	struct fasync_struct	*async_queue; /* queue for the misc device */
+	wait_queue_head_t	misc_wait; /* Wait queue for the misc device */
+	unsigned long		misc_opened; /* bit0: whether the device is open */
+
+	struct lis3lv02d_platform_data *pdata;	/* for passing board config */
 };
 
-int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
+int lis3lv02d_init_device(struct lis3lv02d *lis3);
 int lis3lv02d_joystick_enable(void);
 void lis3lv02d_joystick_disable(void);
-void lis3lv02d_poweroff(acpi_handle handle);
-void lis3lv02d_poweron(acpi_handle handle);
-int lis3lv02d_remove_fs(void);
+void lis3lv02d_poweroff(struct lis3lv02d *lis3);
+void lis3lv02d_poweron(struct lis3lv02d *lis3);
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
 
-extern struct acpi_lis3lv02d adev;
+extern struct lis3lv02d lis3_dev;