X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fhwmon%2Fds1621.c;h=53f88f5118167a8e3ebfb392ed199fb3f3c31175;hb=b00bc0b237055b4c45816325ee14f0bd83e6f590;hp=0096eb37c663e05b25b01ff31da79c18e525f292;hpb=8a9947552d43b0d20d5fa23ac0ba435d526be454;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 0096eb3..53f88f5 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -27,11 +27,14 @@ #include #include #include +#include #include +#include +#include #include "lm75.h" /* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; /* Insmod parameters */ @@ -50,9 +53,11 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") #define DS1621_REG_CONFIG_DONE 0x80 /* The DS1621 registers */ -#define DS1621_REG_TEMP 0xAA /* word, RO */ -#define DS1621_REG_TEMP_MIN 0xA1 /* word, RW */ -#define DS1621_REG_TEMP_MAX 0xA2 /* word, RW */ +static const u8 DS1621_REG_TEMP[3] = { + 0xAA, /* input, word, RO */ + 0xA2, /* min, word, RW */ + 0xA1, /* max, word, RW */ +}; #define DS1621_REG_CONF 0xAC /* byte, RW */ #define DS1621_COM_START 0xEE /* no data */ #define DS1621_COM_STOP 0x22 /* no data */ @@ -61,275 +66,267 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") #define DS1621_ALARM_TEMP_HIGH 0x40 #define DS1621_ALARM_TEMP_LOW 0x20 -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ +/* Conversions */ #define ALARMS_FROM_REG(val) ((val) & \ (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW)) /* Each client has this additional data */ struct ds1621_data { - struct i2c_client client; - struct class_device *class_dev; - struct semaphore update_lock; + struct device *hwmon_dev; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - u16 temp, temp_min, temp_max; /* Register values, word */ + u16 temp[3]; /* Register values, word */ u8 conf; /* Register encoding, combined */ }; -static int ds1621_attach_adapter(struct i2c_adapter *adapter); -static int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind); -static void ds1621_init_client(struct i2c_client *client); -static int ds1621_detach_client(struct i2c_client *client); -static struct ds1621_data *ds1621_update_client(struct device *dev); - -/* This is the driver that will be inserted */ -static struct i2c_driver ds1621_driver = { - .owner = THIS_MODULE, - .name = "ds1621", - .id = I2C_DRIVERID_DS1621, - .attach_adapter = ds1621_attach_adapter, - .detach_client = ds1621_detach_client, -}; - -/* All registers are word-sized, except for the configuration register. +/* Temperature registers are word-sized. DS1621 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ -static int ds1621_read_value(struct i2c_client *client, u8 reg) + the SMBus standard. */ +static int ds1621_read_temp(struct i2c_client *client, u8 reg) { - if (reg == DS1621_REG_CONF) - return i2c_smbus_read_byte_data(client, reg); - else - return swab16(i2c_smbus_read_word_data(client, reg)); + int ret; + + ret = i2c_smbus_read_word_data(client, reg); + if (ret < 0) + return ret; + return swab16(ret); } -/* All registers are word-sized, except for the configuration register. - DS1621 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ -static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value) +static int ds1621_write_temp(struct i2c_client *client, u8 reg, u16 value) { - if (reg == DS1621_REG_CONF) - return i2c_smbus_write_byte_data(client, reg, value); - else - return i2c_smbus_write_word_data(client, reg, swab16(value)); + return i2c_smbus_write_word_data(client, reg, swab16(value)); } static void ds1621_init_client(struct i2c_client *client) { - int reg = ds1621_read_value(client, DS1621_REG_CONF); + u8 conf, new_conf; + + new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); /* switch to continuous conversion mode */ - reg &= ~ DS1621_REG_CONFIG_1SHOT; + new_conf &= ~DS1621_REG_CONFIG_1SHOT; /* setup output polarity */ if (polarity == 0) - reg &= ~DS1621_REG_CONFIG_POLARITY; + new_conf &= ~DS1621_REG_CONFIG_POLARITY; else if (polarity == 1) - reg |= DS1621_REG_CONFIG_POLARITY; + new_conf |= DS1621_REG_CONFIG_POLARITY; - ds1621_write_value(client, DS1621_REG_CONF, reg); + if (conf != new_conf) + i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf); /* start conversion */ i2c_smbus_write_byte(client, DS1621_COM_START); } -#define show(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct ds1621_data *data = ds1621_update_client(dev); \ - return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \ +static struct ds1621_data *ds1621_update_client(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ds1621_data *data = i2c_get_clientdata(client); + u8 new_conf; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting ds1621 update\n"); + + data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); + + for (i = 0; i < ARRAY_SIZE(data->temp); i++) + data->temp[i] = ds1621_read_temp(client, + DS1621_REG_TEMP[i]); + + /* reset alarms if necessary */ + new_conf = data->conf; + if (data->temp[0] > data->temp[1]) /* input > min */ + new_conf &= ~DS1621_ALARM_TEMP_LOW; + if (data->temp[0] < data->temp[2]) /* input < max */ + new_conf &= ~DS1621_ALARM_TEMP_HIGH; + if (data->conf != new_conf) + i2c_smbus_write_byte_data(client, DS1621_REG_CONF, + new_conf); + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; } -show(temp); -show(temp_min); -show(temp_max); - -#define set_temp(suffix, value, reg) \ -static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct ds1621_data *data = ds1621_update_client(dev); \ - u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \ - \ - down(&data->update_lock); \ - data->value = val; \ - ds1621_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ +static ssize_t show_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ds1621_data *data = ds1621_update_client(dev); + return sprintf(buf, "%d\n", + LM75_TEMP_FROM_REG(data->temp[attr->index])); } -set_temp(min, temp_min, DS1621_REG_TEMP_MIN); -set_temp(max, temp_max, DS1621_REG_TEMP_MAX); +static ssize_t set_temp(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct ds1621_data *data = i2c_get_clientdata(client); + u16 val = LM75_TEMP_TO_REG(simple_strtol(buf, NULL, 10)); + + mutex_lock(&data->update_lock); + data->temp[attr->index] = val; + ds1621_write_temp(client, DS1621_REG_TEMP[attr->index], + data->temp[attr->index]); + mutex_unlock(&data->update_lock); + return count; +} -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms(struct device *dev, struct device_attribute *da, + char *buf) { struct ds1621_data *data = ds1621_update_client(dev); return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf)); } +static ssize_t show_alarm(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ds1621_data *data = ds1621_update_client(dev); + return sprintf(buf, "%d\n", !!(data->conf & attr->index)); +} + static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, + DS1621_ALARM_TEMP_LOW); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, + DS1621_ALARM_TEMP_HIGH); + +static struct attribute *ds1621_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &dev_attr_alarms.attr, + NULL +}; +static const struct attribute_group ds1621_group = { + .attrs = ds1621_attributes, +}; -static int ds1621_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, ds1621_detect); -} -/* This function is called by i2c_probe */ -static int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ds1621_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int conf, temp; - struct i2c_client *new_client; - struct ds1621_data *data; - int err = 0; + int i; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_WRITE_BYTE)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access ds1621_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &ds1621_driver; - new_client->flags = 0; - + return -ENODEV; /* Now, we do the remaining detection. It is lousy. */ if (kind < 0) { /* The NVB bit should be low if no EEPROM write has been requested during the latest 10ms, which is highly improbable in our case. */ - conf = ds1621_read_value(new_client, DS1621_REG_CONF); - if (conf & DS1621_REG_CONFIG_NVB) - goto exit_free; + conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); + if (conf < 0 || conf & DS1621_REG_CONFIG_NVB) + return -ENODEV; /* The 7 lowest bits of a temperature should always be 0. */ - temp = ds1621_read_value(new_client, DS1621_REG_TEMP); - if (temp & 0x007f) - goto exit_free; - temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN); - if (temp & 0x007f) - goto exit_free; - temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX); - if (temp & 0x007f) - goto exit_free; + for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) { + temp = i2c_smbus_read_word_data(client, + DS1621_REG_TEMP[i]); + if (temp < 0 || (temp & 0x7f00)) + return -ENODEV; + } } - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = ds1621; + strlcpy(info->type, "ds1621", I2C_NAME_SIZE); - /* Fill in remaining client fields and put it into the global list */ - strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); + return 0; +} - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; +static int ds1621_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ds1621_data *data; + int err; + + data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the DS1621 chip */ - ds1621_init_client(new_client); + ds1621_init_client(client); /* Register sysfs hooks */ - data->class_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->class_dev)) { - err = PTR_ERR(data->class_dev); - goto exit_detach; + if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group))) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove_files; } - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - return 0; -/* OK, this is not exactly good programming practice, usually. But it is - very code-efficient in this case. */ - exit_detach: - i2c_detach_client(new_client); + exit_remove_files: + sysfs_remove_group(&client->dev.kobj, &ds1621_group); exit_free: kfree(data); exit: return err; } -static int ds1621_detach_client(struct i2c_client *client) +static int ds1621_remove(struct i2c_client *client) { struct ds1621_data *data = i2c_get_clientdata(client); - int err; - hwmon_device_unregister(data->class_dev); - - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ds1621_group); kfree(data); return 0; } +static const struct i2c_device_id ds1621_id[] = { + { "ds1621", ds1621 }, + { "ds1625", ds1621 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ds1621_id); -static struct ds1621_data *ds1621_update_client(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct ds1621_data *data = i2c_get_clientdata(client); - u8 new_conf; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - dev_dbg(&client->dev, "Starting ds1621 update\n"); - - data->conf = ds1621_read_value(client, DS1621_REG_CONF); - - data->temp = ds1621_read_value(client, DS1621_REG_TEMP); - - data->temp_min = ds1621_read_value(client, - DS1621_REG_TEMP_MIN); - data->temp_max = ds1621_read_value(client, - DS1621_REG_TEMP_MAX); - - /* reset alarms if necessary */ - new_conf = data->conf; - if (data->temp < data->temp_min) - new_conf &= ~DS1621_ALARM_TEMP_LOW; - if (data->temp > data->temp_max) - new_conf &= ~DS1621_ALARM_TEMP_HIGH; - if (data->conf != new_conf) - ds1621_write_value(client, DS1621_REG_CONF, - new_conf); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} +/* This is the driver that will be inserted */ +static struct i2c_driver ds1621_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ds1621", + }, + .probe = ds1621_probe, + .remove = ds1621_remove, + .id_table = ds1621_id, + .detect = ds1621_detect, + .address_data = &addr_data, +}; static int __init ds1621_init(void) {