X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fhwmon%2FKconfig;h=9e640c62ebd9d267c1efcc2800ae07c36854caf8;hb=54fe4671aa5853ca88da72d67e969a3d8de6dcf6;hp=4dc76bc45c9dd066df37ef2a4d32bbba2d4757cd;hpb=3d960a99ab1dcf6f395b883c5cca01c2dc150451;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4dc76bc..9e640c6 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -28,6 +28,17 @@ config HWMON_VID tristate default n +config HWMON_DEBUG_CHIP + bool "Hardware Monitoring Chip debugging messages" + default n + help + Say Y here if you want the I2C chip drivers to produce a bunch of + debug messages to the system log. Select this if you are having + a problem with I2C support and want to see more of what is going + on. + +comment "Native drivers" + config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" depends on X86 && EXPERIMENTAL @@ -57,6 +68,16 @@ config SENSORS_ABITUGURU3 This driver can also be built as a module. If so, the module will be called abituguru3. +config SENSORS_AD7414 + tristate "Analog Devices AD7414" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + AD7414 temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called ad7414. + config SENSORS_AD7418 tristate "Analog Devices AD7416, AD7417 and AD7418" depends on I2C && EXPERIMENTAL @@ -67,6 +88,22 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER && EXPERIMENTAL + help + If you say yes here you get support for the National Semiconductor + ADCS chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C @@ -124,7 +161,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, @@ -133,6 +170,16 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL @@ -144,15 +191,31 @@ config SENSORS_ADT7470 will be called adt7470. config SENSORS_ADT7473 - tristate "Analog Devices ADT7473" + tristate "Analog Devices ADT7473 (DEPRECATED)" depends on I2C && EXPERIMENTAL + select SENSORS_ADT7475 help If you say yes here you get support for the Analog Devices ADT7473 temperature monitoring chips. + This driver is deprecated, you should use the adt7475 driver + instead. + This driver can also be built as a module. If so, the module will be called adt7473. +config SENSORS_ADT7475 + tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" + depends on I2C && EXPERIMENTAL + select HWMON_VID + help + If you say yes here you get support for the Analog Devices + ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring + chips. + + This driver can also be build as a module. If so, the module + will be called adt7475. + config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" depends on X86 && PCI && EXPERIMENTAL @@ -248,11 +311,12 @@ config SENSORS_F71805F will be called f71805f. config SENSORS_F71882FG - tristate "Fintek F71882FG and F71883FG" + tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring - features of the Fintek F71882FG and F71883FG Super-I/O chips. + features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, + F71889FG and F8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71882fg. @@ -267,39 +331,31 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. -config SENSORS_FSCHER - tristate "FSC Hermes" +config SENSORS_FSCHMD + tristate "Fujitsu Siemens Computers sensor chips" depends on X86 && I2C help - If you say yes here you get support for Fujitsu Siemens - Computers Hermes sensor chips. + If you say yes here you get support for the following Fujitsu + Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, + Heimdall, Heracles, Hades and Syleus including support for the + integrated watchdog. - This driver can also be built as a module. If so, the module - will be called fscher. - -config SENSORS_FSCPOS - tristate "FSC Poseidon" - depends on X86 && I2C - help - If you say yes here you get support for Fujitsu Siemens - Computers Poseidon sensor chips. + This is a merged driver for FSC sensor chips replacing the fscpos, + fscscy and fscher drivers and adding support for several other FSC + sensor chips. This driver can also be built as a module. If so, the module - will be called fscpos. + will be called fschmd. -config SENSORS_FSCHMD - tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" - depends on X86 && I2C && EXPERIMENTAL +config SENSORS_G760A + tristate "GMT G760A" + depends on I2C help - If you say yes here you get support for various Fujitsu Siemens - Computers sensor chips. - - This is a new merged driver for FSC sensor chips which is intended - as a replacment for the fscpos, fscscy and fscher drivers and adds - support for several other FCS sensor chips. + If you say yes here you get support for Global Mixed-mode + Technology Inc G760A fan speed PWM controller chips. This driver can also be built as a module. If so, the module - will be called fschmd. + will be called g760a. config SENSORS_GL518SM tristate "Genesys Logic GL518SM" @@ -323,12 +379,26 @@ config SENSORS_GL520SM will be called gl520sm. config SENSORS_CORETEMP - tristate "Intel Core (2) Duo/Solo temperature sensor" + tristate "Intel Core/Core2/Atom temperature sensor" depends on X86 && EXPERIMENTAL help If you say yes here you get support for the temperature - sensor inside your CPU. Supported all are all known variants - of Intel Core family. + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check documentation/driver for details. + +config SENSORS_IBMAEM + tristate "IBM Active Energy Manager temperature/power sensors and control" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors and capping hardware in various IBM System X + servers that support Active Energy Manager. This includes + the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, + and certain HC10/HS2x/LS2x/QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmaem. config SENSORS_IBMPEX tristate "IBM PowerExecutive temperature/power sensors" @@ -349,7 +419,8 @@ config SENSORS_IT87 select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, - IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone. + IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the + SiS960 clone. This driver can also be built as a module. If so, the module will be called it87. @@ -367,26 +438,47 @@ config SENSORS_LM63 will be called lm63. config SENSORS_LM70 - tristate "National Semiconductor LM70" + tristate "National Semiconductor LM70 / Texas Instruments TMP121" depends on SPI_MASTER && EXPERIMENTAL help If you say yes here you get support for the National Semiconductor - LM70 digital temperature sensor chip. + LM70 and Texas Instruments TMP121/TMP123 digital temperature + sensor chips. This driver can also be built as a module. If so, the module will be called lm70. +config SENSORS_LM73 + tristate "National Semiconductor LM73" + depends on I2C + help + If you say yes here you get support for National Semiconductor LM73 + sensor chips. + This driver can also be built as a module. If so, the module + will be called lm73. + config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C help - If you say yes here you get support for National Semiconductor LM75 - sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in - 9-bit precision mode), and TelCom (now Microchip) TCN75. + If you say yes here you get support for one common type of + temperature sensor chip, with models including: + + - Dallas Semiconductor DS75 and DS1775 + - Maxim MAX6625 and MAX6626 + - Microchip MCP980x + - National Semiconductor LM75 + - NXP's LM75A + - ST Microelectronics STDS75 + - TelCom (now Microchip) TCN75 + - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 + + This driver supports driver model based binding through board + specific I2C device tables. - The DS75 and DS1775 in 10- to 12-bit precision modes will require - a force module parameter. The driver will not handle the extra - precision anyhow. + It also supports the "legacy" style of driver binding. To use + that with some chips which don't replicate LM75 quirks exactly, + you may need the "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. @@ -459,11 +551,9 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657, - MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. - - The Analog Devices ADT7461 sensor chip is also supported, but only - if found in ADM1032 compatibility mode. + LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim + MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, + MAX6680, MAX6681 and MAX6692 sensor chips. This driver can also be built as a module. If so, the module will be called lm90. @@ -489,6 +579,46 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. +config SENSORS_LTC4215 + tristate "Linear Technology LTC4215" + depends on I2C && EXPERIMENTAL + default n + help + If you say yes here you get support for Linear Technology LTC4215 + Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4215. + +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C && EXPERIMENTAL + default n + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + +config SENSORS_LM95241 + tristate "National Semiconductor LM95241 sensor chip" + depends on I2C + help + If you say yes here you get support for LM95241 sensor chip. + + This driver can also be built as a module. If so, the module + will be called lm95241. + +config SENSORS_MAX1111 + tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" + depends on SPI_MASTER + help + Say y here to support Maxim's MAX1111 ADC chips. + + This driver can also be built as a module. If so, the module + will be called max1111. + config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" depends on I2C @@ -534,6 +664,47 @@ config SENSORS_PC87427 This driver can also be built as a module. If so, the module will be called pc87427. +config SENSORS_PCF8591 + tristate "Philips PCF8591 ADC/DAC" + depends on I2C + default n + help + If you say yes here you get support for Philips PCF8591 4-channel + ADC, 1-channel DAC chips. + + This driver can also be built as a module. If so, the module + will be called pcf8591. + + These devices are hard to detect and rarely found on mainstream + hardware. If unsure, say N. + +config SENSORS_SHT15 + tristate "Sensiron humidity and temperature sensors. SHT15 and compat." + depends on GENERIC_GPIO + help + If you say yes here you get support for the Sensiron SHT10, SHT11, + SHT15, SHT71, SHT75 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht15. + +config SENSORS_S3C + tristate "S3C24XX/S3C64XX Inbuilt ADC" + depends on ARCH_S3C2410 + help + If you say yes here you get support for the on-board ADCs of + the Samsung S3C24XX or S3C64XX series of SoC + + This driver can also be built as a module. If so, the module + will be called s3c-hwmo. + +config SENSORS_S3C_RAW + bool "Include raw channel attributes in sysfs" + depends on SENSORS_S3C + help + Say Y here if you want to include raw copies of all the ADC + channels in sysfs. + config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" depends on PCI @@ -550,8 +721,8 @@ config SENSORS_DME1737 select HWMON_VID help If you say yes here you get support for the hardware monitoring - and fan control features of the SMSC DME1737 (and compatibles - like the Asus A8000) and SCH311x Super-I/O chips. + and fan control features of the SMSC DME1737, SCH311x, SCH5027, and + Asus A8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called dme1737. @@ -619,6 +790,26 @@ config SENSORS_THMC50 This driver can also be built as a module. If so, the module will be called thmc50. +config SENSORS_TMP401 + tristate "Texas Instruments TMP401 and compatibles" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Texas Instruments TMP401 and + TMP411 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp401. + +config SENSORS_TMP421 + tristate "Texas Instruments TMP421 and compatible" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Texas Instruments TMP421, + TMP422 and TMP423 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp421. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI @@ -665,7 +856,7 @@ config SENSORS_W83781D config SENSORS_W83791D tristate "Winbond W83791D" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W83791D chip. @@ -726,7 +917,7 @@ config SENSORS_W83627HF will be called w83627hf. config SENSORS_W83627EHF - tristate "Winbond W83627EHF/DHG" + tristate "Winbond W83627EHF/EHG/DHG, W83667HG" select HWMON_VID help If you say yes here you get support for the hardware @@ -737,9 +928,39 @@ config SENSORS_W83627EHF chip suited for specific Intel processors that use PECI such as the Core 2 Duo. + This driver also supports the W83667HG chip. + This driver can also be built as a module. If so, the module will be called w83627ehf. +config SENSORS_WM831X + tristate "WM831x PMICs" + depends on MFD_WM831X + help + If you say yes here you get support for the hardware + monitoring functionality of the Wolfson Microelectronics + WM831x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm831x-hwmon. + +config SENSORS_WM8350 + tristate "Wolfson Microelectronics WM835x" + depends on MFD_WM8350 + help + If you say yes here you get support for the hardware + monitoring features of the WM835x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm8350-hwmon. + +config SENSORS_ULTRA45 + tristate "Sun Ultra45 PIC16F747" + depends on SPARC64 + help + This driver provides support for the Ultra45 workstation environmental + sensors. + config SENSORS_HDAPS tristate "IBM Hard Drive Active Protection System (hdaps)" depends on INPUT && X86 @@ -760,6 +981,23 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_LIS3_SPI + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" + depends on !ACPI && SPI_MASTER && INPUT + select INPUT_POLLDEV + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via SPI. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the SPI transport + is called lis3lv02d_spi. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 @@ -785,13 +1023,56 @@ config SENSORS_APPLESMC Say Y here if you have an applicable laptop and want to experience the awesome power of applesmc. -config HWMON_DEBUG_CHIP - bool "Hardware Monitoring Chip debugging messages" +config SENSORS_MC13783_ADC + tristate "Freescale MC13783 ADC" + depends on MFD_MC13783 + help + Support for the A/D converter on MC13783 PMIC. + +if ACPI + +comment "ACPI drivers" + +config SENSORS_ATK0110 + tristate "ASUS ATK0110" + depends on X86 && EXPERIMENTAL + help + If you say yes here you get support for the ACPI hardware + monitoring interface found in many ASUS motherboards. This + driver will provide readings of fans, voltages and temperatures + through the system firmware. + + This driver can also be built as a module. If so, the module + will be called asus_atk0110. + +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on INPUT + select INPUT_POLLDEV + select NEW_LEDS + select LEDS_CLASS default n help - Say Y here if you want the I2C chip drivers to produce a bunch of - debug messages to the system log. Select this if you are having - a problem with I2C support and want to see more of what is going - on. + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. On HP laptops, + if the led infrastructure is activated, support for a led indicating + disk protection will be provided as hp:red:hddprotection. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for HP laptops will be + called hp_accel. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of lis3lv02d. + +endif # ACPI endif # HWMON