X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fhwmon%2FKconfig;h=700a1657554f4b3b5f4910268343790ddb33c1eb;hb=d34887da6be91eaac1db168fa48d91eaa4504795;hp=78c237f8fa0a28ee136919978f27b7fbe033fca0;hpb=87673dd735b8e089b7f2830edd353aa5f5e743ad;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 78c237f..700a165 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -2,10 +2,9 @@ # Hardware monitoring chip drivers configuration # -menu "Hardware Monitoring support" - -config HWMON +menuconfig HWMON tristate "Hardware Monitoring support" + depends on HAS_IOMEM default y help Hardware monitoring devices let you monitor the hardware health @@ -23,25 +22,54 @@ config HWMON This support can also be built as a module. If so, the module will be called hwmon. +if HWMON + config HWMON_VID tristate default n config SENSORS_ABITUGURU - tristate "Abit uGuru" - depends on HWMON && EXPERIMENTAL + tristate "Abit uGuru (rev 1 & 2)" + depends on X86 && EXPERIMENTAL help - If you say yes here you get support for the Abit uGuru chips - sensor part. The voltage and frequency control parts of the Abit - uGuru are not supported. The Abit uGuru chip can be found on Abit - uGuru featuring motherboards (most modern Abit motherboards). + If you say yes here you get support for the sensor part of the first + and second revision of the Abit uGuru chip. The voltage and frequency + control parts of the Abit uGuru are not supported. The Abit uGuru + chip can be found on Abit uGuru featuring motherboards (most modern + Abit motherboards from before end 2005). For more info and a list + of which motherboards have which revision see + Documentation/hwmon/abituguru This driver can also be built as a module. If so, the module will be called abituguru. +config SENSORS_ABITUGURU3 + tristate "Abit uGuru (rev 3)" + depends on X86 && EXPERIMENTAL + help + If you say yes here you get support for the sensor part of the + third revision of the Abit uGuru chip. Only reading the sensors + and their settings is supported. The third revision of the Abit + uGuru chip can be found on recent Abit motherboards (since end + 2005). For more info and a list of which motherboards have which + revision see Documentation/hwmon/abituguru3 + + This driver can also be built as a module. If so, the module + will be called abituguru3. + +config SENSORS_AD7418 + tristate "Analog Devices AD7416, AD7417 and AD7418" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + AD7416, AD7417 and AD7418 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called ad7418. + config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, @@ -53,7 +81,7 @@ config SENSORS_ADM1021 config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM1025 @@ -64,7 +92,7 @@ config SENSORS_ADM1025 config SENSORS_ADM1026 tristate "Analog Devices ADM1026 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Analog Devices ADM1026 @@ -73,9 +101,20 @@ config SENSORS_ADM1026 This driver can also be built as a module. If so, the module will be called adm1026. +config SENSORS_ADM1029 + tristate "Analog Devices ADM1029" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Analog Devices ADM1029 + sensor chip. + Very rare chip, please let us know you use it. + + This driver can also be built as a module. If so, the module + will be called adm1029. + config SENSORS_ADM1031 tristate "Analog Devices ADM1031 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. @@ -85,7 +124,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, @@ -94,9 +133,57 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7470 + tristate "Analog Devices ADT7470" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7470 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7470. + +config SENSORS_K8TEMP + tristate "AMD Athlon64/FX or Opteron temperature sensor" + depends on X86 && PCI && EXPERIMENTAL + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported is whole AMD K8 + microarchitecture. Please note that you will need at least + lm-sensors 2.10.1 for proper userspace support. + + This driver can also be built as a module. If so, the module + will be called k8temp. + +config SENSORS_AMS + tristate "Apple Motion Sensor driver" + depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL + select INPUT_POLLDEV + help + Support for the motion sensor included in PowerBooks. Includes + implementations for PMU and I2C. + + This driver can also be built as a module. If so, the module + will be called ams. + +config SENSORS_AMS_PMU + bool "PMU variant" + depends on SENSORS_AMS && ADB_PMU + default y + help + PMU variant of motion sensor, found in late 2005 PowerBooks. + +config SENSORS_AMS_I2C + bool "I2C variant" + depends on SENSORS_AMS && I2C + default y + help + I2C variant of motion sensor, found in early 2005 PowerBooks and + iBooks. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" - depends on HWMON && I2C && EXPERIMENTAL + depends on X86 && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor @@ -107,7 +194,7 @@ config SENSORS_ASB100 config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Attansic ATXP1 VID @@ -121,7 +208,7 @@ config SENSORS_ATXP1 config SENSORS_DS1621 tristate "Dallas Semiconductor DS1621 and DS1625" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for Dallas Semiconductor DS1621 and DS1625 sensor chips. @@ -130,18 +217,39 @@ config SENSORS_DS1621 will be called ds1621. config SENSORS_F71805F - tristate "Fintek F71805F/FG" - depends on HWMON && EXPERIMENTAL + tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" + depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring - features of the Fintek F71805F/FG chips. + features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG + Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71805f. +config SENSORS_F71882FG + tristate "Fintek F71882FG and F71883FG" + depends on EXPERIMENTAL + help + If you say yes here you get support for hardware monitoring + features of the Fintek F71882FG and F71883FG Super-I/O chips. + + This driver can also be built as a module. If so, the module + will be called f71882fg. + +config SENSORS_F75375S + tristate "Fintek F75375S/SP and F75373"; + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for hardware monitoring + features of the Fintek F75375S/SP and F75373 + + This driver can also be built as a module. If so, the module + will be called f75375s. + config SENSORS_FSCHER tristate "FSC Hermes" - depends on HWMON && I2C && EXPERIMENTAL + depends on X86 && I2C help If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -151,7 +259,7 @@ config SENSORS_FSCHER config SENSORS_FSCPOS tristate "FSC Poseidon" - depends on HWMON && I2C && EXPERIMENTAL + depends on X86 && I2C help If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -159,9 +267,23 @@ config SENSORS_FSCPOS This driver can also be built as a module. If so, the module will be called fscpos. +config SENSORS_FSCHMD + tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" + depends on X86 && I2C && EXPERIMENTAL + help + If you say yes here you get support for various Fujitsu Siemens + Computers sensor chips. + + This is a new merged driver for FSC sensor chips which is intended + as a replacment for the fscpos, fscscy and fscher drivers and adds + support for several other FCS sensor chips. + + This driver can also be built as a module. If so, the module + will be called fschmd. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for Genesys Logic GL518SM sensor chips. @@ -171,7 +293,7 @@ config SENSORS_GL518SM config SENSORS_GL520SM tristate "Genesys Logic GL520SM" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Genesys Logic GL520SM @@ -180,21 +302,40 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_CORETEMP + tristate "Intel Core (2) Duo/Solo temperature sensor" + depends on X86 && EXPERIMENTAL + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported all are all known variants + of Intel Core family. + +config SENSORS_IBMPEX + tristate "IBM PowerExecutive temperature/power sensors" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors in various IBM System X servers that support + PowerExecutive. So far this includes the x3550, x3650, x3655, + x3755, and certain HS20 blades. + + This driver can also be built as a module. If so, the module + will be called ibmpex. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" - depends on HWMON && I2C - select I2C_ISA select HWMON_VID help If you say yes here you get support for ITE IT8705F, IT8712F, - IT8716F and IT8718F sensor chips, and the SiS960 clone. + IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone. This driver can also be built as a module. If so, the module will be called it87. config SENSORS_LM63 tristate "National Semiconductor LM63" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for the National Semiconductor LM63 remote diode digital temperature sensor with integrated fan @@ -206,7 +347,7 @@ config SENSORS_LM63 config SENSORS_LM70 tristate "National Semiconductor LM70" - depends on HWMON && SPI_MASTER && EXPERIMENTAL + depends on SPI_MASTER && EXPERIMENTAL help If you say yes here you get support for the National Semiconductor LM70 digital temperature sensor chip. @@ -216,7 +357,7 @@ config SENSORS_LM70 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for National Semiconductor LM75 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in @@ -231,7 +372,7 @@ config SENSORS_LM75 config SENSORS_LM77 tristate "National Semiconductor LM77" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for National Semiconductor LM77 sensor chips. @@ -241,8 +382,7 @@ config SENSORS_LM77 config SENSORS_LM78 tristate "National Semiconductor LM78 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL - select I2C_ISA + depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM78, @@ -253,7 +393,7 @@ config SENSORS_LM78 config SENSORS_LM80 tristate "National Semiconductor LM80" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for National Semiconductor LM80 sensor chips. @@ -263,7 +403,7 @@ config SENSORS_LM80 config SENSORS_LM83 tristate "National Semiconductor LM83 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for National Semiconductor LM82 and LM83 sensor chips. @@ -273,7 +413,7 @@ config SENSORS_LM83 config SENSORS_LM85 tristate "National Semiconductor LM85 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for National Semiconductor LM85 @@ -284,7 +424,7 @@ config SENSORS_LM85 config SENSORS_LM87 tristate "National Semiconductor LM87" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 @@ -295,11 +435,11 @@ config SENSORS_LM87 config SENSORS_LM90 tristate "National Semiconductor LM90 and compatibles" - depends on HWMON && I2C + depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and - MAX6658 sensor chips. + LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657, + MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. The Analog Devices ADT7461 sensor chip is also supported, but only if found in ADM1032 compatibility mode. @@ -309,7 +449,7 @@ config SENSORS_LM90 config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. @@ -317,19 +457,38 @@ config SENSORS_LM92 This driver can also be built as a module. If so, the module will be called lm92. +config SENSORS_LM93 + tristate "National Semiconductor LM93 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for National Semiconductor LM93 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm93. + config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C help If you say yes here you get support for MAX1619 sensor chip. This driver can also be built as a module. If so, the module will be called max1619. +config SENSORS_MAX6650 + tristate "Maxim MAX6650 sensor chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the MAX6650 / MAX6651 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6650. + config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" - depends on HWMON && I2C && EXPERIMENTAL - select I2C_ISA select HWMON_VID help If you say yes here you get access to the hardware monitoring @@ -341,10 +500,22 @@ config SENSORS_PC87360 This driver can also be built as a module. If so, the module will be called pc87360. +config SENSORS_PC87427 + tristate "National Semiconductor PC87427" + depends on EXPERIMENTAL + help + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC87427 Super-I/O chip. + The chip has two distinct logical devices, one for fan speed + monitoring and control, and one for voltage and temperature + monitoring. Only fan speed monitoring is supported right now. + + This driver can also be built as a module. If so, the module + will be called pc87427. + config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" - depends on HWMON && I2C && PCI && EXPERIMENTAL - select I2C_ISA + depends on PCI help If you say yes here you get support for the integrated sensors in SiS5595 South Bridges. @@ -352,30 +523,42 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. +config SENSORS_DME1737 + tristate "SMSC DME1737, SCH311x and compatibles" + depends on I2C && EXPERIMENTAL + select HWMON_VID + help + If you say yes here you get support for the hardware monitoring + and fan control features of the SMSC DME1737 (and compatibles + like the Asus A8000) and SCH311x Super-I/O chips. + + This driver can also be built as a module. If so, the module + will be called dme1737. + config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" - depends on HWMON && I2C && EXPERIMENTAL - select I2C_ISA help If you say yes here you get support for the integrated fan monitoring and control capabilities of the SMSC LPC47B27x, - LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192 and - LPC47M997 chips. + LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, + LPC47M192, LPC47M292 and LPC47M997 chips. - The temperature and voltage sensor features of the LPC47M192 - and LPC47M997 are supported by another driver, select also - "SMSC LPC47M192 and compatibles" below for those. + The temperature and voltage sensor features of the LPC47M15x, + LPC47M192, LPC47M292 and LPC47M997 are supported by another + driver, select also "SMSC LPC47M192 and compatibles" below for + those. This driver can also be built as a module. If so, the module will be called smsc47m1. config SENSORS_SMSC47M192 tristate "SMSC LPC47M192 and compatibles" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the temperature and - voltage sensors of the SMSC LPC47M192 and LPC47M997 chips. + voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 + and LPC47M997 chips. The fan monitoring and control capabilities of these chips are supported by another driver, select @@ -387,8 +570,7 @@ config SENSORS_SMSC47M192 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" - depends on HWMON && I2C && EXPERIMENTAL - select I2C_ISA + depends on EXPERIMENTAL help If you say yes here you get support for the SMSC LPC47B397-NC sensor chip. @@ -396,10 +578,19 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_THMC50 + tristate "Texas Instruments THMC50 / Analog Devices ADM1022" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Texas Instruments THMC50 + sensor chips and clones: the Analog Devices ADM1022. + + This driver can also be built as a module. If so, the module + will be called thmc50. + config SENSORS_VIA686A tristate "VIA686A" - depends on HWMON && I2C && PCI - select I2C_ISA + depends on PCI help If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges. @@ -407,11 +598,21 @@ config SENSORS_VIA686A This driver can also be built as a module. If so, the module will be called via686a. +config SENSORS_VT1211 + tristate "VIA VT1211" + depends on EXPERIMENTAL + select HWMON_VID + help + If you say yes here then you get support for hardware monitoring + features of the VIA VT1211 Super-I/O chip. + + This driver can also be built as a module. If so, the module + will be called vt1211. + config SENSORS_VT8231 - tristate "VT8231" - depends on HWMON && I2C && PCI && EXPERIMENTAL + tristate "VIA VT8231" + depends on PCI select HWMON_VID - select I2C_ISA help If you say yes here then you get support for the integrated sensors in the VIA VT8231 device. @@ -421,8 +622,7 @@ config SENSORS_VT8231 config SENSORS_W83781D tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" - depends on HWMON && I2C - select I2C_ISA + depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W8378x series @@ -434,7 +634,7 @@ config SENSORS_W83781D config SENSORS_W83791D tristate "Winbond W83791D" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the Winbond W83791D chip. @@ -444,16 +644,27 @@ config SENSORS_W83791D config SENSORS_W83792D tristate "Winbond W83792D" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83792D chip. This driver can also be built as a module. If so, the module will be called w83792d. +config SENSORS_W83793 + tristate "Winbond W83793" + depends on I2C && EXPERIMENTAL + select HWMON_VID + help + If you say yes here you get support for the Winbond W83793 + hardware monitoring chip. + + This driver can also be built as a module. If so, the module + will be called w83793. + config SENSORS_W83L785TS tristate "Winbond W83L785TS-S" - depends on HWMON && I2C && EXPERIMENTAL + depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83L785TS-S sensor chip, which is used on the Asus A7N8X, among other @@ -464,8 +675,6 @@ config SENSORS_W83L785TS config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" - depends on HWMON && I2C - select I2C_ISA select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series @@ -476,24 +685,24 @@ config SENSORS_W83627HF will be called w83627hf. config SENSORS_W83627EHF - tristate "Winbond W83627EHF" - depends on HWMON && I2C && EXPERIMENTAL - select I2C_ISA + tristate "Winbond W83627EHF/DHG" + select HWMON_VID help - If you say yes here you get preliminary support for the hardware + If you say yes here you get support for the hardware monitoring functionality of the Winbond W83627EHF Super-I/O chip. - Only fan and temperature inputs are supported at the moment, while - the chip does much more than that. This driver also supports the W83627EHG, which is the lead-free - version of the W83627EHF. + version of the W83627EHF, and the W83627DHG, which is a similar + chip suited for specific Intel processors that use PECI such as + the Core 2 Duo. This driver can also be built as a module. If so, the module will be called w83627ehf. config SENSORS_HDAPS tristate "IBM Hard Drive Active Protection System (hdaps)" - depends on HWMON && INPUT && X86 + depends on INPUT && X86 + select INPUT_POLLDEV default n help This driver provides support for the IBM Hard Drive Active Protection @@ -504,12 +713,39 @@ config SENSORS_HDAPS This driver also provides an absolute input class device, allowing the laptop to act as a pinball machine-esque joystick. + If your ThinkPad is not recognized by the driver, please update to latest + BIOS. This is especially the case for some R52 ThinkPads. + Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_APPLESMC + tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" + depends on INPUT && X86 + select NEW_LEDS + select LEDS_CLASS + select INPUT_POLLDEV + default n + help + This driver provides support for the Apple System Management + Controller, which provides an accelerometer (Apple Sudden Motion + Sensor), light sensors, temperature sensors, keyboard backlight + control and fan control. + + Only Intel-based Apple's computers are supported (MacBook Pro, + MacBook, MacMini). + + Data from the different sensors, keyboard backlight control and fan + control are accessible via sysfs. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of applesmc. + config HWMON_DEBUG_CHIP bool "Hardware Monitoring Chip debugging messages" - depends on HWMON default n help Say Y here if you want the I2C chip drivers to produce a bunch of @@ -517,4 +753,4 @@ config HWMON_DEBUG_CHIP a problem with I2C support and want to see more of what is going on. -endmenu +endif # HWMON