X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fhwmon%2FKconfig;h=1c44f5c47aab865385d82cbffdca1302bf5e6576;hb=455fbdd376c3ed3a5be8c039348896fdd87e9930;hp=e8f44b580f0a91a1c1a77b0ce9cc7aaa03d997e3;hpb=b981d8b3f5e008ff10d993be633ad00564fc22cd;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index e8f44b5..1c44f5c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -30,7 +30,7 @@ config HWMON_VID config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on EXPERIMENTAL + depends on X86 && EXPERIMENTAL help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -45,7 +45,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on HWMON && EXPERIMENTAL + depends on X86 && EXPERIMENTAL help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors @@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3 This driver can also be built as a module. If so, the module will be called abituguru3. +config SENSORS_AD7414 + tristate "Analog Devices AD7414" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + AD7414 temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called ad7414. + config SENSORS_AD7418 tristate "Analog Devices AD7416, AD7417 and AD7418" depends on I2C && EXPERIMENTAL @@ -67,6 +77,22 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER && EXPERIMENTAL + help + If you say yes here you get support for the National Semiconductor + ADCS chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C @@ -124,7 +150,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, @@ -133,6 +159,26 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7470 + tristate "Analog Devices ADT7470" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7470 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7470. + +config SENSORS_ADT7473 + tristate "Analog Devices ADT7473" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7473 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7473. + config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" depends on X86 && PCI && EXPERIMENTAL @@ -173,7 +219,7 @@ config SENSORS_AMS_I2C config SENSORS_ASB100 tristate "Asus ASB100 Bach" - depends on I2C && EXPERIMENTAL + depends on X86 && I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor @@ -206,20 +252,50 @@ config SENSORS_DS1621 This driver can also be built as a module. If so, the module will be called ds1621. +config SENSORS_I5K_AMB + tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" + depends on PCI && EXPERIMENTAL + help + If you say yes here you get support for FB-DIMM AMB temperature + monitoring chips on systems with the Intel 5000 series chipset. + + This driver can also be built as a module. If so, the module + will be called i5k_amb. + config SENSORS_F71805F - tristate "Fintek F71805F/FG and F71872F/FG" + tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring - features of the Fintek F71805F/FG and F71872F/FG Super-I/O - chips. + features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG + Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71805f. +config SENSORS_F71882FG + tristate "Fintek F71882FG and F71883FG" + depends on EXPERIMENTAL + help + If you say yes here you get support for hardware monitoring + features of the Fintek F71882FG and F71883FG Super-I/O chips. + + This driver can also be built as a module. If so, the module + will be called f71882fg. + +config SENSORS_F75375S + tristate "Fintek F75375S/SP and F75373"; + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for hardware monitoring + features of the Fintek F75375S/SP and F75373 + + This driver can also be built as a module. If so, the module + will be called f75375s. + config SENSORS_FSCHER tristate "FSC Hermes" - depends on I2C + depends on X86 && I2C help If you say yes here you get support for Fujitsu Siemens Computers Hermes sensor chips. @@ -229,7 +305,7 @@ config SENSORS_FSCHER config SENSORS_FSCPOS tristate "FSC Poseidon" - depends on I2C + depends on X86 && I2C help If you say yes here you get support for Fujitsu Siemens Computers Poseidon sensor chips. @@ -237,6 +313,20 @@ config SENSORS_FSCPOS This driver can also be built as a module. If so, the module will be called fscpos. +config SENSORS_FSCHMD + tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" + depends on X86 && I2C && EXPERIMENTAL + help + If you say yes here you get support for various Fujitsu Siemens + Computers sensor chips. + + This is a new merged driver for FSC sensor chips which is intended + as a replacment for the fscpos, fscscy and fscher drivers and adds + support for several other FCS sensor chips. + + This driver can also be built as a module. If so, the module + will be called fschmd. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C @@ -266,6 +356,34 @@ config SENSORS_CORETEMP sensor inside your CPU. Supported all are all known variants of Intel Core family. +config SENSORS_IBMAEM + tristate "IBM Active Energy Manager temperature/power sensors and control" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors and capping hardware in various IBM System X + servers that support Active Energy Manager. This includes + the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, + and certain HS2x/LS2x/QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmaem. + +config SENSORS_IBMPEX + tristate "IBM PowerExecutive temperature/power sensors" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors in various IBM System X servers that support + PowerExecutive. So far this includes the x3350, x3550, x3650, + x3655, and x3755; the x3800, x3850, and x3950 models that have + PCI Express; and some of the HS2x, LS2x, and QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmpex. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" select HWMON_VID @@ -302,13 +420,24 @@ config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C help - If you say yes here you get support for National Semiconductor LM75 - sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in - 9-bit precision mode), and TelCom (now Microchip) TCN75. + If you say yes here you get support for one common type of + temperature sensor chip, with models including: + + - Dallas Semiconductor DS75 and DS1775 + - Maxim MAX6625 and MAX6626 + - Microchip MCP980x + - National Semiconductor LM75 + - NXP's LM75A + - ST Microelectronics STDS75 + - TelCom (now Microchip) TCN75 + - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 - The DS75 and DS1775 in 10- to 12-bit precision modes will require - a force module parameter. The driver will not handle the extra - precision anyhow. + This driver supports driver model based binding through board + specific I2C device tables. + + It also supports the "legacy" style of driver binding. To use + that with some chips which don't replicate LM75 quirks exactly, + you may need the "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. @@ -366,12 +495,12 @@ config SENSORS_LM85 will be called lm85. config SENSORS_LM87 - tristate "National Semiconductor LM87" + tristate "National Semiconductor LM87 and compatibles" depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM87 - sensor chips. + and Analog Devices ADM1024 sensor chips. This driver can also be built as a module. If so, the module will be called lm87. @@ -381,11 +510,9 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657, - MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. - - The Analog Devices ADT7461 sensor chip is also supported, but only - if found in ADM1032 compatibility mode. + LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim + MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and + MAX6681 sensor chips. This driver can also be built as a module. If so, the module will be called lm90. @@ -402,7 +529,7 @@ config SENSORS_LM92 config SENSORS_LM93 tristate "National Semiconductor LM93 and compatibles" - depends on HWMON && I2C + depends on I2C select HWMON_VID help If you say yes here you get support for National Semiconductor LM93 @@ -411,6 +538,15 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. +config SENSORS_MAX1111 + tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" + depends on SPI_MASTER + help + Say y here to support Maxim's MAX1111 ADC chips. + + This driver can also be built as a module. If so, the module + will be called max1111. + config SENSORS_MAX1619 tristate "Maxim MAX1619 sensor chip" depends on I2C @@ -467,13 +603,13 @@ config SENSORS_SIS5595 will be called sis5595. config SENSORS_DME1737 - tristate "SMSC DME1737 and compatibles" + tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && EXPERIMENTAL select HWMON_VID help If you say yes here you get support for the hardware monitoring - and fan control features of the SMSC DME1737 (and compatibles - like the Asus A8000) Super-I/O chip. + and fan control features of the SMSC DME1737, SCH311x, SCH5027, and + Asus A8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called dme1737. @@ -521,6 +657,16 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_ADS7828 + tristate "Texas Instruments ADS7828" + depends on I2C + help + If you say yes here you get support for Texas Instruments ADS7828 + 12-bit 8-channel ADC device. + + This driver can also be built as a module. If so, the module + will be called ads7828. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C && EXPERIMENTAL @@ -564,13 +710,13 @@ config SENSORS_VT8231 will be called vt8231. config SENSORS_W83781D - tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" + tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W8378x series - of sensor chips: the W83781D, W83782D, W83783S and W83627HF, - and the similar Asus AS99127F. + of sensor chips: the W83781D, W83782D and W83783S, and the similar + Asus AS99127F. This driver can also be built as a module. If so, the module will be called w83781d. @@ -616,6 +762,16 @@ config SENSORS_W83L785TS This driver can also be built as a module. If so, the module will be called w83l785ts. +config SENSORS_W83L786NG + tristate "Winbond W83L786NG, W83L786NR" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Winbond W83L786NG + and W83L786NR sensor chips. + + This driver can also be built as a module. If so, the module + will be called w83l786ng. + config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" select HWMON_VID @@ -642,9 +798,17 @@ config SENSORS_W83627EHF This driver can also be built as a module. If so, the module will be called w83627ehf. +config SENSORS_ULTRA45 + tristate "Sun Ultra45 PIC16F747" + depends on SPARC64 + help + This driver provides support for the Ultra45 workstation environmental + sensors. + config SENSORS_HDAPS tristate "IBM Hard Drive Active Protection System (hdaps)" depends on INPUT && X86 + select INPUT_POLLDEV default n help This driver provides support for the IBM Hard Drive Active Protection @@ -661,6 +825,25 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on ACPI && INPUT + default n + help + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as a module. If so, the module + will be called lis3lv02d. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86