X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fchar%2Fspecialix.c;h=2c24fcdc722a920fe00861be3b77fe76f168d2e6;hb=0c53b9fbcca8870e4f4b248f4ed5fdadd43a01b6;hp=1b5330299e30fa965086eae13d601a1e80e29be3;hpb=326f28e9ec4b2619c2fd410593fc95fcb0ba6b41;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 1b53302..2c24fcd 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -72,13 +72,12 @@
 /*
  * There is a bunch of documentation about the card, jumpers, config
  * settings, restrictions, cables, device names and numbers in
- * Documentation/specialix.txt
+ * Documentation/serial/specialix.txt
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/ioport.h>
@@ -88,12 +87,14 @@
 #include <linux/tty_flip.h>
 #include <linux/mm.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/fcntl.h>
 #include <linux/major.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <linux/gfp.h>
 
 #include "specialix_io8.h"
 #include "cd1865.h"
@@ -111,9 +112,10 @@
 
 static int sx_debug;
 static int sx_rxfifo = SPECIALIX_RXFIFO;
+static int sx_rtscts;
 
 #ifdef DEBUG
-#define dprintk(f, str...) if (sx_debug & f) printk (str)
+#define dprintk(f, str...) if (sx_debug & f) printk(str)
 #else
 #define dprintk(f, str...) /* nothing */
 #endif
@@ -132,10 +134,8 @@ static int sx_rxfifo = SPECIALIX_RXFIFO;
 #define SX_DEBUG_FIFO    0x0800
 
 
-#define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__FUNCTION__)
-#define func_exit()  dprintk (SX_DEBUG_FLOW, "io8: exit  %s\n", __FUNCTION__)
-
-#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
+#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__)
+#define func_exit()  dprintk(SX_DEBUG_FLOW, "io8: exit  %s\n", __func__)
 
 
 /* Configurable options: */
@@ -143,17 +143,6 @@ static int sx_rxfifo = SPECIALIX_RXFIFO;
 /* Am I paranoid or not ? ;-) */
 #define SPECIALIX_PARANOIA_CHECK
 
-/* Do I trust the IRQ from the card? (enabeling it doesn't seem to help)
-   When the IRQ routine leaves the chip in a state that is keeps on
-   requiring attention, the timer doesn't help either. */
-#undef SPECIALIX_TIMER
-
-#ifdef SPECIALIX_TIMER
-static int sx_poll = HZ;
-#endif
-
-
-
 /*
  * The following defines are mostly for testing purposes. But if you need
  * some nice reporting in your syslog, you can define them also.
@@ -163,32 +152,13 @@ static int sx_poll = HZ;
 
 
 
-#ifdef CONFIG_SPECIALIX_RTSCTS
-#define SX_CRTSCTS(bla) 1
-#else
-#define SX_CRTSCTS(tty) C_CRTSCTS(tty)
-#endif
-
-
-/* Used to be outb (0xff, 0x80); */
-#define short_pause() udelay (1)
-
 
 #define SPECIALIX_LEGAL_FLAGS \
 	(ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
 	 ASYNC_SPD_HI       | ASYNC_SPEED_VHI    | ASYNC_SESSION_LOCKOUT | \
 	 ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
 
-#undef RS_EVENT_WRITE_WAKEUP
-#define RS_EVENT_WRITE_WAKEUP	0
-
 static struct tty_driver *specialix_driver;
-static unsigned char * tmp_buf;
-
-static unsigned long baud_table[] =  {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 0,
-};
 
 static struct specialix_board sx_board[SX_NBOARD] =  {
 	{ 0, SX_IOBASE1,  9, },
@@ -200,21 +170,14 @@ static struct specialix_board sx_board[SX_NBOARD] =  {
 static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
 
 
-#ifdef SPECIALIX_TIMER
-static struct timer_list missed_irq_timer;
-static irqreturn_t sx_interrupt(int irq, void * dev_id, struct pt_regs * regs);
-#endif
-
-
-
-static inline int sx_paranoia_check(struct specialix_port const * port,
+static int sx_paranoia_check(struct specialix_port const *port,
 				    char *name, const char *routine)
 {
 #ifdef SPECIALIX_PARANOIA_CHECK
-	static const char *badmagic =
-		KERN_ERR "sx: Warning: bad specialix port magic number for device %s in %s\n";
-	static const char *badinfo =
-		KERN_ERR "sx: Warning: null specialix port for device %s in %s\n";
+	static const char *badmagic = KERN_ERR
+	  "sx: Warning: bad specialix port magic number for device %s in %s\n";
+	static const char *badinfo = KERN_ERR
+	  "sx: Warning: null specialix port for device %s in %s\n";
 
 	if (!port) {
 		printk(badinfo, name, routine);
@@ -236,66 +199,69 @@ static inline int sx_paranoia_check(struct specialix_port const * port,
  */
 
 /* Get board number from pointer */
-static inline int board_No (struct specialix_board * bp)
+static inline int board_No(struct specialix_board *bp)
 {
 	return bp - sx_board;
 }
 
 
 /* Get port number from pointer */
-static inline int port_No (struct specialix_port const * port)
+static inline int port_No(struct specialix_port const *port)
 {
 	return SX_PORT(port - sx_port);
 }
 
 
 /* Get pointer to board from pointer to port */
-static inline struct specialix_board * port_Board(struct specialix_port const * port)
+static inline struct specialix_board *port_Board(
+					struct specialix_port const *port)
 {
 	return &sx_board[SX_BOARD(port - sx_port)];
 }
 
 
 /* Input Byte from CL CD186x register */
-static inline unsigned char sx_in(struct specialix_board  * bp, unsigned short reg)
+static inline unsigned char sx_in(struct specialix_board *bp,
+							unsigned short reg)
 {
 	bp->reg = reg | 0x80;
-	outb (reg | 0x80, bp->base + SX_ADDR_REG);
-	return inb  (bp->base + SX_DATA_REG);
+	outb(reg | 0x80, bp->base + SX_ADDR_REG);
+	return inb(bp->base + SX_DATA_REG);
 }
 
 
 /* Output Byte to CL CD186x register */
-static inline void sx_out(struct specialix_board  * bp, unsigned short reg,
+static inline void sx_out(struct specialix_board *bp, unsigned short reg,
 			  unsigned char val)
 {
 	bp->reg = reg | 0x80;
-	outb (reg | 0x80, bp->base + SX_ADDR_REG);
-	outb (val, bp->base + SX_DATA_REG);
+	outb(reg | 0x80, bp->base + SX_ADDR_REG);
+	outb(val, bp->base + SX_DATA_REG);
 }
 
 
 /* Input Byte from CL CD186x register */
-static inline unsigned char sx_in_off(struct specialix_board  * bp, unsigned short reg)
+static inline unsigned char sx_in_off(struct specialix_board *bp,
+				unsigned short reg)
 {
 	bp->reg = reg;
-	outb (reg, bp->base + SX_ADDR_REG);
-	return inb  (bp->base + SX_DATA_REG);
+	outb(reg, bp->base + SX_ADDR_REG);
+	return inb(bp->base + SX_DATA_REG);
 }
 
 
 /* Output Byte to CL CD186x register */
-static inline void sx_out_off(struct specialix_board  * bp, unsigned short reg,
-			  unsigned char val)
+static inline void sx_out_off(struct specialix_board  *bp,
+				unsigned short reg, unsigned char val)
 {
 	bp->reg = reg;
-	outb (reg, bp->base + SX_ADDR_REG);
-	outb (val, bp->base + SX_DATA_REG);
+	outb(reg, bp->base + SX_ADDR_REG);
+	outb(val, bp->base + SX_DATA_REG);
 }
 
 
 /* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR(struct specialix_board  * bp)
+static void sx_wait_CCR(struct specialix_board  *bp)
 {
 	unsigned long delay, flags;
 	unsigned char ccr;
@@ -306,7 +272,7 @@ static inline void sx_wait_CCR(struct specialix_board  * bp)
 		spin_unlock_irqrestore(&bp->lock, flags);
 		if (!ccr)
 			return;
-		udelay (1);
+		udelay(1);
 	}
 
 	printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
@@ -314,7 +280,7 @@ static inline void sx_wait_CCR(struct specialix_board  * bp)
 
 
 /* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR_off(struct specialix_board  * bp)
+static void sx_wait_CCR_off(struct specialix_board  *bp)
 {
 	unsigned long delay;
 	unsigned char crr;
@@ -326,7 +292,7 @@ static inline void sx_wait_CCR_off(struct specialix_board  * bp)
 		spin_unlock_irqrestore(&bp->lock, flags);
 		if (!crr)
 			return;
-		udelay (1);
+		udelay(1);
 	}
 
 	printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
@@ -337,7 +303,7 @@ static inline void sx_wait_CCR_off(struct specialix_board  * bp)
  *  specialix IO8+ IO range functions.
  */
 
-static inline int sx_request_io_range(struct specialix_board * bp)
+static int sx_request_io_range(struct specialix_board *bp)
 {
 	return request_region(bp->base,
 		bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
@@ -345,27 +311,15 @@ static inline int sx_request_io_range(struct specialix_board * bp)
 }
 
 
-static inline void sx_release_io_range(struct specialix_board * bp)
+static void sx_release_io_range(struct specialix_board *bp)
 {
-	release_region(bp->base,
-	               bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE);
+	release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ?
+					SX_PCI_IO_SPACE : SX_IO_SPACE);
 }
 
 
-/* Must be called with enabled interrupts */
-/* Ugly. Very ugly. Don't use this for anything else than initialization
-   code */
-static inline void sx_long_delay(unsigned long delay)
-{
-	unsigned long i;
-
-	for (i = jiffies + delay; time_after(i, jiffies); ) ;
-}
-
-
-
 /* Set the IRQ using the RTS lines that run to the PAL on the board.... */
-static int sx_set_irq ( struct specialix_board *bp)
+static int sx_set_irq(struct specialix_board *bp)
 {
 	int virq;
 	int i;
@@ -375,15 +329,24 @@ static int sx_set_irq ( struct specialix_board *bp)
 		return 1;
 	switch (bp->irq) {
 	/* In the same order as in the docs... */
-	case 15: virq = 0;break;
-	case 12: virq = 1;break;
-	case 11: virq = 2;break;
-	case 9:  virq = 3;break;
-	default: printk (KERN_ERR "Speclialix: cannot set irq to %d.\n", bp->irq);
-	         return 0;
+	case 15:
+		virq = 0;
+		break;
+	case 12:
+		virq = 1;
+		break;
+	case 11:
+		virq = 2;
+		break;
+	case 9:
+		virq = 3;
+		break;
+	default:printk(KERN_ERR
+			    "Speclialix: cannot set irq to %d.\n", bp->irq);
+		return 0;
 	}
 	spin_lock_irqsave(&bp->lock, flags);
-	for (i=0;i<2;i++) {
+	for (i = 0; i < 2; i++) {
 		sx_out(bp, CD186x_CAR, i);
 		sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0);
 	}
@@ -393,7 +356,7 @@ static int sx_set_irq ( struct specialix_board *bp)
 
 
 /* Reset and setup CD186x chip */
-static int sx_init_CD186x(struct specialix_board  * bp)
+static int sx_init_CD186x(struct specialix_board  *bp)
 {
 	unsigned long flags;
 	int scaler;
@@ -404,7 +367,7 @@ static int sx_init_CD186x(struct specialix_board  * bp)
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out_off(bp, CD186x_CCR, CCR_HARDRESET);      /* Reset CD186x chip          */
 	spin_unlock_irqrestore(&bp->lock, flags);
-	sx_long_delay(HZ/20);                      /* Delay 0.05 sec            */
+	msleep(50);					/* Delay 0.05 sec            */
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out_off(bp, CD186x_GIVR, SX_ID);             /* Set ID for this chip      */
 	sx_out_off(bp, CD186x_GICR, 0);                 /* Clear all bits            */
@@ -412,7 +375,7 @@ static int sx_init_CD186x(struct specialix_board  * bp)
 	sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT);      /* Prio for transmitter intr */
 	sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT);      /* Prio for receiver intr    */
 	/* Set RegAckEn */
-	sx_out_off(bp, CD186x_SRCR, sx_in (bp, CD186x_SRCR) | SRCR_REGACKEN);
+	sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN);
 
 	/* Setting up prescaler. We need 4 ticks per 1 ms */
 	scaler =  SX_OSCFREQ/SPECIALIX_TPS;
@@ -421,9 +384,9 @@ static int sx_init_CD186x(struct specialix_board  * bp)
 	sx_out_off(bp, CD186x_PPRL, scaler & 0xff);
 	spin_unlock_irqrestore(&bp->lock, flags);
 
-	if (!sx_set_irq (bp)) {
+	if (!sx_set_irq(bp)) {
 		/* Figure out how to pass this along... */
-		printk (KERN_ERR "Cannot set irq to %d.\n", bp->irq);
+		printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq);
 		rv = 0;
 	}
 
@@ -432,16 +395,16 @@ static int sx_init_CD186x(struct specialix_board  * bp)
 }
 
 
-static int read_cross_byte (struct specialix_board *bp, int reg, int bit)
+static int read_cross_byte(struct specialix_board *bp, int reg, int bit)
 {
 	int i;
 	int t;
 	unsigned long flags;
 
 	spin_lock_irqsave(&bp->lock, flags);
-	for (i=0, t=0;i<8;i++) {
-		sx_out_off (bp, CD186x_CAR, i);
-		if (sx_in_off (bp, reg) & bit)
+	for (i = 0, t = 0; i < 8; i++) {
+		sx_out_off(bp, CD186x_CAR, i);
+		if (sx_in_off(bp, reg) & bit)
 			t |= 1 << i;
 	}
 	spin_unlock_irqrestore(&bp->lock, flags);
@@ -450,39 +413,10 @@ static int read_cross_byte (struct specialix_board *bp, int reg, int bit)
 }
 
 
-#ifdef SPECIALIX_TIMER
-void missed_irq (unsigned long data)
-{
-	unsigned char irq;
-	unsigned long flags;
-	struct specialix_board  *bp = (struct specialix_board *)data;
-
-	spin_lock_irqsave(&bp->lock, flags);
-	irq = sx_in ((struct specialix_board *)data, CD186x_SRSR) &
-	                                            (SRSR_RREQint |
-	                                             SRSR_TREQint |
-	                                             SRSR_MREQint);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	if (irq) {
-		printk (KERN_INFO "Missed interrupt... Calling int from timer. \n");
-		sx_interrupt (((struct specialix_board *)data)->irq,
-		              (void*)data, NULL);
-	}
-	missed_irq_timer.expires = jiffies + sx_poll;
-	add_timer (&missed_irq_timer);
-}
-#endif
-
-
-
 /* Main probing routine, also sets irq. */
 static int sx_probe(struct specialix_board *bp)
 {
 	unsigned char val1, val2;
-#if 0
-	int irqs = 0;
-	int retries;
-#endif
 	int rev;
 	int chip;
 
@@ -495,17 +429,18 @@ static int sx_probe(struct specialix_board *bp)
 
 	/* Are the I/O ports here ? */
 	sx_out_off(bp, CD186x_PPRL, 0x5a);
-	short_pause ();
+	udelay(1);
 	val1 = sx_in_off(bp, CD186x_PPRL);
 
 	sx_out_off(bp, CD186x_PPRL, 0xa5);
-	short_pause ();
+	udelay(1);
 	val2 = sx_in_off(bp, CD186x_PPRL);
 
 
-	if ((val1 != 0x5a) || (val2 != 0xa5)) {
-		printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
-		       board_No(bp), bp->base);
+	if (val1 != 0x5a || val2 != 0xa5) {
+		printk(KERN_INFO
+			"sx%d: specialix IO8+ Board at 0x%03x not found.\n",
+						board_No(bp), bp->base);
 		sx_release_io_range(bp);
 		func_exit();
 		return 1;
@@ -513,10 +448,11 @@ static int sx_probe(struct specialix_board *bp)
 
 	/* Check the DSR lines that Specialix uses as board
 	   identification */
-	val1 = read_cross_byte (bp, CD186x_MSVR, MSVR_DSR);
-	val2 = read_cross_byte (bp, CD186x_MSVR, MSVR_RTS);
-	dprintk (SX_DEBUG_INIT, "sx%d: DSR lines are: %02x, rts lines are: %02x\n",
-	        board_No(bp),  val1, val2);
+	val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR);
+	val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS);
+	dprintk(SX_DEBUG_INIT,
+			"sx%d: DSR lines are: %02x, rts lines are: %02x\n",
+					board_No(bp), val1, val2);
 
 	/* They managed to switch the bit order between the docs and
 	   the IO8+ card. The new PCI card now conforms to old docs.
@@ -524,7 +460,8 @@ static int sx_probe(struct specialix_board *bp)
 	   old card. */
 	val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2;
 	if (val1 != val2) {
-		printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
+		printk(KERN_INFO
+		  "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
 		       board_No(bp), val2, bp->base, val1);
 		sx_release_io_range(bp);
 		func_exit();
@@ -532,47 +469,6 @@ static int sx_probe(struct specialix_board *bp)
 	}
 
 
-#if 0
-	/* It's time to find IRQ for this board */
-	for (retries = 0; retries < 5 && irqs <= 0; retries++) {
-		irqs = probe_irq_on();
-		sx_init_CD186x(bp);	       		/* Reset CD186x chip       */
-		sx_out(bp, CD186x_CAR, 2);               /* Select port 2          */
-		sx_wait_CCR(bp);
-		sx_out(bp, CD186x_CCR, CCR_TXEN);        /* Enable transmitter     */
-		sx_out(bp, CD186x_IER, IER_TXRDY);       /* Enable tx empty intr   */
-		sx_long_delay(HZ/20);
-		irqs = probe_irq_off(irqs);
-
-		dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
-		dprintk (SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR));
-		dprintk (SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR));
-		dprintk (SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR));
-		dprintk (SX_DEBUG_INIT, "\n");
-
-		/* Reset CD186x again      */
-		if (!sx_init_CD186x(bp)) {
-			/* Hmmm. This is dead code anyway. */
-		}
-
-		dprintk (SX_DEBUG_INIT "val1 = %02x, val2 = %02x, val3 = %02x.\n",
-		        val1, val2, val3);
-
-	}
-
-#if 0
-	if (irqs <= 0) {
-		printk(KERN_ERR "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
-		       board_No(bp), bp->base);
-		sx_release_io_range(bp);
-		func_exit();
-		return 1;
-	}
-#endif
-	printk (KERN_INFO "Started with irq=%d, but now have irq=%d.\n", bp->irq, irqs);
-	if (irqs > 0)
-		bp->irq = irqs;
-#endif
 	/* Reset CD186x again  */
 	if (!sx_init_CD186x(bp)) {
 		sx_release_io_range(bp);
@@ -584,7 +480,7 @@ static int sx_probe(struct specialix_board *bp)
 	bp->flags |= SX_BOARD_PRESENT;
 
 	/* Chip           revcode   pkgtype
-	                  GFRCR     SRCR bit 7
+			  GFRCR     SRCR bit 7
 	   CD180 rev B    0x81      0
 	   CD180 rev C    0x82      0
 	   CD1864 rev A   0x82      1
@@ -594,27 +490,32 @@ static int sx_probe(struct specialix_board *bp)
 	 */
 
 	switch (sx_in_off(bp, CD186x_GFRCR)) {
-	case 0x82:chip = 1864;rev='A';break;
-	case 0x83:chip = 1865;rev='A';break;
-	case 0x84:chip = 1865;rev='B';break;
-	case 0x85:chip = 1865;rev='C';break; /* Does not exist at this time */
-	default:chip=-1;rev='x';
+	case 0x82:
+		chip = 1864;
+		rev = 'A';
+		break;
+	case 0x83:
+		chip = 1865;
+		rev = 'A';
+		break;
+	case 0x84:
+		chip = 1865;
+		rev = 'B';
+		break;
+	case 0x85:
+		chip = 1865;
+		rev = 'C';
+		break; /* Does not exist at this time */
+	default:
+		chip = -1;
+		rev = 'x';
 	}
 
-	dprintk (SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR) );
-
-#ifdef SPECIALIX_TIMER
-	init_timer (&missed_irq_timer);
-	missed_irq_timer.function = missed_irq;
-	missed_irq_timer.data = (unsigned long) bp;
-	missed_irq_timer.expires = jiffies + sx_poll;
-	add_timer (&missed_irq_timer);
-#endif
+	dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR));
 
-	printk(KERN_INFO"sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
-	       board_No(bp),
-	       bp->base, bp->irq,
-	       chip, rev);
+	printk(KERN_INFO
+    "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
+				board_No(bp), bp->base, bp->irq, chip, rev);
 
 	func_exit();
 	return 0;
@@ -625,31 +526,22 @@ static int sx_probe(struct specialix_board *bp)
  *  Interrupt processing routines.
  * */
 
-static inline void sx_mark_event(struct specialix_port * port, int event)
-{
-	func_enter();
-
-	set_bit(event, &port->event);
-	schedule_work(&port->tqueue);
-
-	func_exit();
-}
-
-
-static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
-					       unsigned char const * what)
+static struct specialix_port *sx_get_port(struct specialix_board *bp,
+					       unsigned char const *what)
 {
 	unsigned char channel;
-	struct specialix_port * port = NULL;
+	struct specialix_port *port = NULL;
 
 	channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF;
-	dprintk (SX_DEBUG_CHAN, "channel: %d\n", channel);
+	dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel);
 	if (channel < CD186x_NCH) {
 		port = &sx_port[board_No(bp) * SX_NPORT + channel];
-		dprintk (SX_DEBUG_CHAN, "port: %d %p flags: 0x%x\n",board_No(bp) * SX_NPORT + channel,  port, port->flags & ASYNC_INITIALIZED);
+		dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",
+			board_No(bp) * SX_NPORT + channel,  port,
+			port->port.flags & ASYNC_INITIALIZED);
 
-		if (port->flags & ASYNC_INITIALIZED) {
-			dprintk (SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
+		if (port->port.flags & ASYNC_INITIALIZED) {
+			dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
 			func_exit();
 			return port;
 		}
@@ -660,7 +552,7 @@ static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
 }
 
 
-static inline void sx_receive_exc(struct specialix_board * bp)
+static void sx_receive_exc(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -671,27 +563,29 @@ static inline void sx_receive_exc(struct specialix_board * bp)
 
 	port = sx_get_port(bp, "Receive");
 	if (!port) {
-		dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
+		dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
 		func_exit();
 		return;
 	}
-	tty = port->tty;
+	tty = port->port.tty;
 
 	status = sx_in(bp, CD186x_RCSR);
 
-	dprintk (SX_DEBUG_RX, "status: 0x%x\n", status);
+	dprintk(SX_DEBUG_RX, "status: 0x%x\n", status);
 	if (status & RCSR_OE) {
 		port->overrun++;
-		dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Overrun. Total %ld overruns.\n",
-		       board_No(bp), port_No(port), port->overrun);
+		dprintk(SX_DEBUG_FIFO,
+			"sx%d: port %d: Overrun. Total %ld overruns.\n",
+				board_No(bp), port_No(port), port->overrun);
 	}
 	status &= port->mark_mask;
 
 	/* This flip buffer check needs to be below the reading of the
 	   status register to reset the chip's IRQ.... */
 	if (tty_buffer_request_room(tty, 1) == 0) {
-		dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Working around flip buffer overflow.\n",
-		       board_No(bp), port_No(port));
+		dprintk(SX_DEBUG_FIFO,
+		    "sx%d: port %d: Working around flip buffer overflow.\n",
+					board_No(bp), port_No(port));
 		func_exit();
 		return;
 	}
@@ -702,8 +596,9 @@ static inline void sx_receive_exc(struct specialix_board * bp)
 		return;
 	}
 	if (status & RCSR_TOUT) {
-		printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
-		       board_No(bp), port_No(port));
+		printk(KERN_INFO
+		    "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
+					board_No(bp), port_No(port));
 		func_exit();
 		return;
 
@@ -711,7 +606,7 @@ static inline void sx_receive_exc(struct specialix_board * bp)
 		dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
 		       board_No(bp), port_No(port));
 		flag = TTY_BREAK;
-		if (port->flags & ASYNC_SAK)
+		if (port->port.flags & ASYNC_SAK)
 			do_SAK(tty);
 
 	} else if (status & RCSR_PE)
@@ -726,13 +621,13 @@ static inline void sx_receive_exc(struct specialix_board * bp)
 	else
 		flag = TTY_NORMAL;
 
-	if(tty_insert_flip_char(tty, ch, flag))
+	if (tty_insert_flip_char(tty, ch, flag))
 		tty_flip_buffer_push(tty);
 	func_exit();
 }
 
 
-static inline void sx_receive(struct specialix_board * bp)
+static void sx_receive(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -740,19 +635,18 @@ static inline void sx_receive(struct specialix_board * bp)
 
 	func_enter();
 
-	if (!(port = sx_get_port(bp, "Receive"))) {
-		dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
+	port = sx_get_port(bp, "Receive");
+	if (port == NULL) {
+		dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
 		func_exit();
 		return;
 	}
-	tty = port->tty;
+	tty = port->port.tty;
 
 	count = sx_in(bp, CD186x_RDCR);
-	dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
+	dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
 	port->hits[count > 8 ? 9 : count]++;
 
-	tty_buffer_request_room(tty, count);
-
 	while (count--)
 		tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL);
 	tty_flip_buffer_push(tty);
@@ -760,19 +654,20 @@ static inline void sx_receive(struct specialix_board * bp)
 }
 
 
-static inline void sx_transmit(struct specialix_board * bp)
+static void sx_transmit(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
 	unsigned char count;
 
 	func_enter();
-	if (!(port = sx_get_port(bp, "Transmit"))) {
+	port = sx_get_port(bp, "Transmit");
+	if (port == NULL) {
 		func_exit();
 		return;
 	}
-	dprintk (SX_DEBUG_TX, "port: %p\n", port);
-	tty = port->tty;
+	dprintk(SX_DEBUG_TX, "port: %p\n", port);
+	tty = port->port.tty;
 
 	if (port->IER & IER_TXEMPTY) {
 		/* FIFO drained */
@@ -803,7 +698,8 @@ static inline void sx_transmit(struct specialix_board * bp)
 			sx_out(bp, CD186x_TDR, CD186x_C_ESC);
 			sx_out(bp, CD186x_TDR, CD186x_C_DELAY);
 			sx_out(bp, CD186x_TDR, count);
-			if (!(port->break_length -= count))
+			port->break_length -= count;
+			if (port->break_length == 0)
 				port->break_length--;
 		} else {
 			sx_out(bp, CD186x_TDR, CD186x_C_ESC);
@@ -832,37 +728,37 @@ static inline void sx_transmit(struct specialix_board * bp)
 		sx_out(bp, CD186x_IER, port->IER);
 	}
 	if (port->xmit_cnt <= port->wakeup_chars)
-		sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+		tty_wakeup(tty);
 
 	func_exit();
 }
 
 
-static inline void sx_check_modem(struct specialix_board * bp)
+static void sx_check_modem(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
 	unsigned char mcr;
 	int msvr_cd;
 
-	dprintk (SX_DEBUG_SIGNALS, "Modem intr. ");
-	if (!(port = sx_get_port(bp, "Modem")))
+	dprintk(SX_DEBUG_SIGNALS, "Modem intr. ");
+	port = sx_get_port(bp, "Modem");
+	if (port == NULL)
 		return;
 
-	tty = port->tty;
+	tty = port->port.tty;
 
 	mcr = sx_in(bp, CD186x_MCR);
-	printk ("mcr = %02x.\n", mcr);
 
 	if ((mcr & MCR_CDCHG)) {
-		dprintk (SX_DEBUG_SIGNALS, "CD just changed... ");
+		dprintk(SX_DEBUG_SIGNALS, "CD just changed... ");
 		msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD;
 		if (msvr_cd) {
-			dprintk (SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
-			wake_up_interruptible(&port->open_wait);
+			dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
+			wake_up_interruptible(&port->port.open_wait);
 		} else {
-			dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n");
-			schedule_work(&port->tqueue_hangup);
+			dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n");
+			tty_hangup(tty);
 		}
 	}
 
@@ -872,7 +768,7 @@ static inline void sx_check_modem(struct specialix_board * bp)
 			tty->hw_stopped = 0;
 			port->IER |= IER_TXRDY;
 			if (port->xmit_cnt <= port->wakeup_chars)
-				sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+				tty_wakeup(tty);
 		} else {
 			tty->hw_stopped = 1;
 			port->IER &= ~IER_TXRDY;
@@ -884,7 +780,7 @@ static inline void sx_check_modem(struct specialix_board * bp)
 			tty->hw_stopped = 0;
 			port->IER |= IER_TXRDY;
 			if (port->xmit_cnt <= port->wakeup_chars)
-				sx_mark_event(port, RS_EVENT_WRITE_WAKEUP);
+				tty_wakeup(tty);
 		} else {
 			tty->hw_stopped = 1;
 			port->IER &= ~IER_TXRDY;
@@ -899,23 +795,25 @@ static inline void sx_check_modem(struct specialix_board * bp)
 
 
 /* The main interrupt processing routine */
-static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t sx_interrupt(int dummy, void *dev_id)
 {
 	unsigned char status;
 	unsigned char ack;
-	struct specialix_board *bp;
+	struct specialix_board *bp = dev_id;
 	unsigned long loop = 0;
 	int saved_reg;
 	unsigned long flags;
 
 	func_enter();
 
-	bp = dev_id;
 	spin_lock_irqsave(&bp->lock, flags);
 
-	dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __FUNCTION__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
-	if (!bp || !(bp->flags & SX_BOARD_ACTIVE)) {
-		dprintk (SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", irq);
+	dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__,
+		port_No(sx_get_port(bp, "INT")),
+		SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
+	if (!(bp->flags & SX_BOARD_ACTIVE)) {
+		dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n",
+								bp->irq);
 		spin_unlock_irqrestore(&bp->lock, flags);
 		func_exit();
 		return IRQ_NONE;
@@ -923,10 +821,11 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	saved_reg = bp->reg;
 
-	while ((++loop < 16) && (status = (sx_in(bp, CD186x_SRSR) &
-	                                   (SRSR_RREQint |
-		                            SRSR_TREQint |
-	                                    SRSR_MREQint)))) {
+	while (++loop < 16) {
+		status = sx_in(bp, CD186x_SRSR) &
+				(SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
+		if (status == 0)
+			break;
 		if (status & SRSR_RREQint) {
 			ack = sx_in(bp, CD186x_RRAR);
 
@@ -935,8 +834,9 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			else if (ack == (SX_ID | GIVR_IT_REXC))
 				sx_receive_exc(bp);
 			else
-				printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
-				       board_No(bp), status, ack);
+				printk(KERN_ERR
+				"sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
+						board_No(bp), status, ack);
 
 		} else if (status & SRSR_TREQint) {
 			ack = sx_in(bp, CD186x_TRAR);
@@ -945,14 +845,16 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 				sx_transmit(bp);
 			else
 				printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n",
-				       board_No(bp), status, ack, port_No (sx_get_port (bp, "Int")));
+					board_No(bp), status, ack,
+					port_No(sx_get_port(bp, "Int")));
 		} else if (status & SRSR_MREQint) {
 			ack = sx_in(bp, CD186x_MRAR);
 
 			if (ack == (SX_ID | GIVR_IT_MODEM))
 				sx_check_modem(bp);
 			else
-				printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
+				printk(KERN_ERR
+				  "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
 				       board_No(bp), status, ack);
 
 		}
@@ -960,7 +862,7 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		sx_out(bp, CD186x_EOIR, 0);   /* Mark end of interrupt */
 	}
 	bp->reg = saved_reg;
-	outb (bp->reg, bp->base + SX_ADDR_REG);
+	outb(bp->reg, bp->base + SX_ADDR_REG);
 	spin_unlock_irqrestore(&bp->lock, flags);
 	func_exit();
 	return IRQ_HANDLED;
@@ -971,36 +873,26 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
  *  Routines for open & close processing.
  */
 
-static void turn_ints_off (struct specialix_board *bp)
+static void turn_ints_off(struct specialix_board *bp)
 {
 	unsigned long flags;
 
 	func_enter();
-	if (bp->flags & SX_BOARD_IS_PCI) {
-		/* This was intended for enabeling the interrupt on the
-		 * PCI card. However it seems that it's already enabled
-		 * and as PCI interrupts can be shared, there is no real
-		 * reason to have to turn it off. */
-	}
-
 	spin_lock_irqsave(&bp->lock, flags);
-	(void) sx_in_off (bp, 0); /* Turn off interrupts. */
+	(void) sx_in_off(bp, 0); /* Turn off interrupts. */
 	spin_unlock_irqrestore(&bp->lock, flags);
 
 	func_exit();
 }
 
-static void turn_ints_on (struct specialix_board *bp)
+static void turn_ints_on(struct specialix_board *bp)
 {
 	unsigned long flags;
 
 	func_enter();
 
-	if (bp->flags & SX_BOARD_IS_PCI) {
-		/* play with the PCI chip. See comment above. */
-	}
 	spin_lock_irqsave(&bp->lock, flags);
-	(void) sx_in (bp, 0); /* Turn ON interrupts. */
+	(void) sx_in(bp, 0); /* Turn ON interrupts. */
 	spin_unlock_irqrestore(&bp->lock, flags);
 
 	func_exit();
@@ -1008,7 +900,7 @@ static void turn_ints_on (struct specialix_board *bp)
 
 
 /* Called with disabled interrupts */
-static inline int sx_setup_board(struct specialix_board * bp)
+static int sx_setup_board(struct specialix_board *bp)
 {
 	int error;
 
@@ -1016,14 +908,16 @@ static inline int sx_setup_board(struct specialix_board * bp)
 		return 0;
 
 	if (bp->flags & SX_BOARD_IS_PCI)
-		error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT | SA_SHIRQ, "specialix IO8+", bp);
+		error = request_irq(bp->irq, sx_interrupt,
+			IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
 	else
-		error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT, "specialix IO8+", bp);
+		error = request_irq(bp->irq, sx_interrupt,
+			IRQF_DISABLED, "specialix IO8+", bp);
 
 	if (error)
 		return error;
 
-	turn_ints_on (bp);
+	turn_ints_on(bp);
 	bp->flags |= SX_BOARD_ACTIVE;
 
 	return 0;
@@ -1031,7 +925,7 @@ static inline int sx_setup_board(struct specialix_board * bp)
 
 
 /* Called with disabled interrupts */
-static inline void sx_shutdown_board(struct specialix_board *bp)
+static void sx_shutdown_board(struct specialix_board *bp)
 {
 	func_enter();
 
@@ -1042,22 +936,26 @@ static inline void sx_shutdown_board(struct specialix_board *bp)
 
 	bp->flags &= ~SX_BOARD_ACTIVE;
 
-	dprintk (SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
-		 bp->irq, board_No (bp));
+	dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
+		 bp->irq, board_No(bp));
 	free_irq(bp->irq, bp);
-
-	turn_ints_off (bp);
-
-
+	turn_ints_off(bp);
 	func_exit();
 }
 
+static unsigned int sx_crtscts(struct tty_struct *tty)
+{
+	if (sx_rtscts)
+		return C_CRTSCTS(tty);
+	return 1;
+}
 
 /*
  * Setting up port characteristics.
  * Must be called with disabled interrupts
  */
-static void sx_change_speed(struct specialix_board *bp, struct specialix_port *port)
+static void sx_change_speed(struct specialix_board *bp,
+						struct specialix_port *port)
 {
 	struct tty_struct *tty;
 	unsigned long baud;
@@ -1069,7 +967,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 
 	func_enter();
 
-	if (!(tty = port->tty) || !tty->termios) {
+	tty = port->port.tty;
+	if (!tty || !tty->termios) {
 		func_exit();
 		return;
 	}
@@ -1082,46 +981,36 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 
 	/* The Specialix board doens't implement the RTS lines.
 	   They are used to set the IRQ level. Don't touch them. */
-	if (SX_CRTSCTS(tty))
+	if (sx_crtscts(tty))
 		port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
 	else
 		port->MSVR =  (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
 	spin_unlock_irqrestore(&bp->lock, flags);
-	dprintk (SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
-	baud = C_BAUD(tty);
+	dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
+	baud = tty_get_baud_rate(tty);
 
-	if (baud & CBAUDEX) {
-		baud &= ~CBAUDEX;
-		if (baud < 1 || baud > 2)
-			port->tty->termios->c_cflag &= ~CBAUDEX;
-		else
-			baud += 15;
+	if (baud == 38400) {
+		if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+			baud = 57600;
+		if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+			baud = 115200;
 	}
-	if (baud == 15) {
-		if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			baud ++;
-		if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			baud += 2;
-	}
-
 
-	if (!baud_table[baud]) {
+	if (!baud) {
 		/* Drop DTR & exit */
-		dprintk (SX_DEBUG_TERMIOS, "Dropping DTR...  Hmm....\n");
-		if (!SX_CRTSCTS (tty)) {
-			port -> MSVR &= ~ MSVR_DTR;
+		dprintk(SX_DEBUG_TERMIOS, "Dropping DTR...  Hmm....\n");
+		if (!sx_crtscts(tty)) {
+			port->MSVR &= ~MSVR_DTR;
 			spin_lock_irqsave(&bp->lock, flags);
-			sx_out(bp, CD186x_MSVR, port->MSVR );
+			sx_out(bp, CD186x_MSVR, port->MSVR);
 			spin_unlock_irqrestore(&bp->lock, flags);
-		}
-		else
-			dprintk (SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
+		} else
+			dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
 		return;
 	} else {
 		/* Set DTR on */
-		if (!SX_CRTSCTS (tty)) {
-			port ->MSVR |= MSVR_DTR;
-		}
+		if (!sx_crtscts(tty))
+			port->MSVR |= MSVR_DTR;
 	}
 
 	/*
@@ -1130,28 +1019,27 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 
 	/* Set baud rate for port */
 	tmp = port->custom_divisor ;
-	if ( tmp )
-		printk (KERN_INFO "sx%d: Using custom baud rate divisor %ld. \n"
-		                  "This is an untested option, please be carefull.\n",
-		                  port_No (port), tmp);
+	if (tmp)
+		printk(KERN_INFO
+			"sx%d: Using custom baud rate divisor %ld. \n"
+			"This is an untested option, please be careful.\n",
+							port_No(port), tmp);
 	else
-		tmp = (((SX_OSCFREQ + baud_table[baud]/2) / baud_table[baud] +
-		         CD186x_TPC/2) / CD186x_TPC);
+		tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) /
+								CD186x_TPC);
 
-	if ((tmp < 0x10) && time_before(again, jiffies)) {
+	if (tmp < 0x10 && time_before(again, jiffies)) {
 		again = jiffies + HZ * 60;
 		/* Page 48 of version 2.0 of the CL-CD1865 databook */
 		if (tmp >= 12) {
-			printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
-			        "Performance degradation is possible.\n"
-			        "Read specialix.txt for more info.\n",
-			        port_No (port), tmp);
+			printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
+				"Performance degradation is possible.\n"
+				"Read specialix.txt for more info.\n",
+						port_No(port), tmp);
 		} else {
-			printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
-			        "Warning: overstressing Cirrus chip. "
-			        "This might not work.\n"
-			        "Read specialix.txt for more info.\n",
-			        port_No (port), tmp);
+			printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
+		"Warning: overstressing Cirrus chip. This might not work.\n"
+		"Read specialix.txt for more info.\n", port_No(port), tmp);
 		}
 	}
 	spin_lock_irqsave(&bp->lock, flags);
@@ -1160,11 +1048,10 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 	sx_out(bp, CD186x_RBPRL, tmp & 0xff);
 	sx_out(bp, CD186x_TBPRL, tmp & 0xff);
 	spin_unlock_irqrestore(&bp->lock, flags);
-	if (port->custom_divisor) {
-		baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor;
-		baud = ( baud + 5 ) / 10;
-	} else
-		baud = (baud_table[baud] + 5) / 10;   /* Estimated CPS */
+	if (port->custom_divisor)
+		baud = (SX_OSCFREQ + port->custom_divisor/2) /
+							port->custom_divisor;
+	baud = (baud + 5) / 10;		/* Estimated CPS */
 
 	/* Two timer ticks seems enough to wakeup something like SLIP driver */
 	tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
@@ -1178,16 +1065,16 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 	sx_out(bp, CD186x_RTPR, tmp);
 	spin_unlock_irqrestore(&bp->lock, flags);
 	switch (C_CSIZE(tty)) {
-	 case CS5:
+	case CS5:
 		cor1 |= COR1_5BITS;
 		break;
-	 case CS6:
+	case CS6:
 		cor1 |= COR1_6BITS;
 		break;
-	 case CS7:
+	case CS7:
 		cor1 |= COR1_7BITS;
 		break;
-	 case CS8:
+	case CS8:
 		cor1 |= COR1_8BITS;
 		break;
 	}
@@ -1224,7 +1111,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 		mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
 		mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
 		spin_lock_irqsave(&bp->lock, flags);
-		tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR));
+		tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) &
+							(MSVR_CTS|MSVR_DSR));
 		spin_unlock_irqrestore(&bp->lock, flags);
 #else
 		port->COR2 |= COR2_CTSAE;
@@ -1268,7 +1156,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
 	/* Setting up modem option registers */
-	dprintk (SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", mcor1, mcor2);
+	dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n",
+								mcor1, mcor2);
 	sx_out(bp, CD186x_MCOR1, mcor1);
 	sx_out(bp, CD186x_MCOR2, mcor2);
 	spin_unlock_irqrestore(&bp->lock, flags);
@@ -1287,13 +1176,14 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 
 
 /* Must be called with interrupts enabled */
-static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port)
+static int sx_setup_port(struct specialix_board *bp,
+						struct specialix_port *port)
 {
 	unsigned long flags;
 
 	func_enter();
 
-	if (port->flags & ASYNC_INITIALIZED) {
+	if (port->port.flags & ASYNC_INITIALIZED) {
 		func_exit();
 		return 0;
 	}
@@ -1302,7 +1192,8 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port
 		/* We may sleep in get_zeroed_page() */
 		unsigned long tmp;
 
-		if (!(tmp = get_zeroed_page(GFP_KERNEL))) {
+		tmp = get_zeroed_page(GFP_KERNEL);
+		if (tmp == 0L) {
 			func_exit();
 			return -ENOMEM;
 		}
@@ -1317,12 +1208,12 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	if (port->tty)
-		clear_bit(TTY_IO_ERROR, &port->tty->flags);
+	if (port->port.tty)
+		clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
 
 	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
 	sx_change_speed(bp, port);
-	port->flags |= ASYNC_INITIALIZED;
+	port->port.flags |= ASYNC_INITIALIZED;
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -1333,7 +1224,8 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port
 
 
 /* Must be called with interrupts disabled */
-static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *port)
+static void sx_shutdown_port(struct specialix_board *bp,
+						struct specialix_port *port)
 {
 	struct tty_struct *tty;
 	int i;
@@ -1341,17 +1233,17 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
 
 	func_enter();
 
-	if (!(port->flags & ASYNC_INITIALIZED)) {
+	if (!(port->port.flags & ASYNC_INITIALIZED)) {
 		func_exit();
 		return;
 	}
 
 	if (sx_debug & SX_DEBUG_FIFO) {
-		dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ",
-			board_No(bp), port_No(port), port->overrun);
-		for (i = 0; i < 10; i++) {
+		dprintk(SX_DEBUG_FIFO,
+			"sx%d: port %d: %ld overruns, FIFO hits [ ",
+				board_No(bp), port_No(port), port->overrun);
+		for (i = 0; i < 10; i++)
 			dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]);
-		}
 		dprintk(SX_DEBUG_FIFO, "].\n");
 	}
 
@@ -1364,7 +1256,8 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CAR, port_No(port));
 
-	if (!(tty = port->tty) || C_HUPCL(tty)) {
+	tty = port->port.tty;
+	if (tty == NULL || C_HUPCL(tty)) {
 		/* Drop DTR */
 		sx_out(bp, CD186x_MSVDTR, 0);
 	}
@@ -1379,7 +1272,7 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
 	spin_unlock_irqrestore(&bp->lock, flags);
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
-	port->flags &= ~ASYNC_INITIALIZED;
+	port->port.flags &= ~ASYNC_INITIALIZED;
 
 	if (!bp->count)
 		sx_shutdown_board(bp);
@@ -1387,8 +1280,8 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
 }
 
 
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-                           struct specialix_port *port)
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+						struct specialix_port *port)
 {
 	DECLARE_WAITQUEUE(wait,  current);
 	struct specialix_board *bp = port_Board(port);
@@ -1403,9 +1296,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	 * If the device is in the middle of being closed, then block
 	 * until it's done, and then try again.
 	 */
-	if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
-		interruptible_sleep_on(&port->close_wait);
-		if (port->flags & ASYNC_HUP_NOTIFY) {
+	if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
+		interruptible_sleep_on(&port->port.close_wait);
+		if (port->port.flags & ASYNC_HUP_NOTIFY) {
 			func_exit();
 			return -EAGAIN;
 		} else {
@@ -1420,7 +1313,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	 */
 	if ((filp->f_flags & O_NONBLOCK) ||
 	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		port->flags |= ASYNC_NORMAL_ACTIVE;
+		port->port.flags |= ASYNC_NORMAL_ACTIVE;
 		func_exit();
 		return 0;
 	}
@@ -1436,37 +1329,36 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	 * exit, either normal or abnormal.
 	 */
 	retval = 0;
-	add_wait_queue(&port->open_wait, &wait);
+	add_wait_queue(&port->port.open_wait, &wait);
 	spin_lock_irqsave(&port->lock, flags);
-	if (!tty_hung_up_p(filp)) {
-		port->count--;
-	}
+	if (!tty_hung_up_p(filp))
+		port->port.count--;
 	spin_unlock_irqrestore(&port->lock, flags);
-	port->blocked_open++;
+	port->port.blocked_open++;
 	while (1) {
 		spin_lock_irqsave(&bp->lock, flags);
 		sx_out(bp, CD186x_CAR, port_No(port));
 		CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
-		if (SX_CRTSCTS (tty)) {
+		if (sx_crtscts(tty)) {
 			/* Activate RTS */
 			port->MSVR |= MSVR_DTR;		/* WTF? */
-			sx_out (bp, CD186x_MSVR, port->MSVR);
+			sx_out(bp, CD186x_MSVR, port->MSVR);
 		} else {
 			/* Activate DTR */
 			port->MSVR |= MSVR_DTR;
-			sx_out (bp, CD186x_MSVR, port->MSVR);
+			sx_out(bp, CD186x_MSVR, port->MSVR);
 		}
 		spin_unlock_irqrestore(&bp->lock, flags);
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (tty_hung_up_p(filp) ||
-		    !(port->flags & ASYNC_INITIALIZED)) {
-			if (port->flags & ASYNC_HUP_NOTIFY)
+		    !(port->port.flags & ASYNC_INITIALIZED)) {
+			if (port->port.flags & ASYNC_HUP_NOTIFY)
 				retval = -EAGAIN;
 			else
 				retval = -ERESTARTSYS;
 			break;
 		}
-		if (!(port->flags & ASYNC_CLOSING) &&
+		if (!(port->port.flags & ASYNC_CLOSING) &&
 		    (do_clocal || CD))
 			break;
 		if (signal_pending(current)) {
@@ -1477,30 +1369,29 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	}
 
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->open_wait, &wait);
+	remove_wait_queue(&port->port.open_wait, &wait);
 	spin_lock_irqsave(&port->lock, flags);
-	if (!tty_hung_up_p(filp)) {
-		port->count++;
-	}
-	port->blocked_open--;
+	if (!tty_hung_up_p(filp))
+		port->port.count++;
+	port->port.blocked_open--;
 	spin_unlock_irqrestore(&port->lock, flags);
 	if (retval) {
 		func_exit();
 		return retval;
 	}
 
-	port->flags |= ASYNC_NORMAL_ACTIVE;
+	port->port.flags |= ASYNC_NORMAL_ACTIVE;
 	func_exit();
 	return 0;
 }
 
 
-static int sx_open(struct tty_struct * tty, struct file * filp)
+static int sx_open(struct tty_struct *tty, struct file *filp)
 {
 	int board;
 	int error;
-	struct specialix_port * port;
-	struct specialix_board * bp;
+	struct specialix_port *port;
+	struct specialix_board *bp;
 	int i;
 	unsigned long flags;
 
@@ -1517,34 +1408,38 @@ static int sx_open(struct tty_struct * tty, struct file * filp)
 	port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
 	port->overrun = 0;
 	for (i = 0; i < 10; i++)
-		port->hits[i]=0;
+		port->hits[i] = 0;
 
-	dprintk (SX_DEBUG_OPEN, "Board = %d, bp = %p, port = %p, portno = %d.\n",
-	        board, bp, port, SX_PORT(tty->index));
+	dprintk(SX_DEBUG_OPEN,
+			"Board = %d, bp = %p, port = %p, portno = %d.\n",
+				 board, bp, port, SX_PORT(tty->index));
 
 	if (sx_paranoia_check(port, tty->name, "sx_open")) {
 		func_enter();
 		return -ENODEV;
 	}
 
-	if ((error = sx_setup_board(bp))) {
+	error = sx_setup_board(bp);
+	if (error) {
 		func_exit();
 		return error;
 	}
 
 	spin_lock_irqsave(&bp->lock, flags);
-	port->count++;
+	port->port.count++;
 	bp->count++;
 	tty->driver_data = port;
-	port->tty = tty;
+	port->port.tty = tty;
 	spin_unlock_irqrestore(&bp->lock, flags);
 
-	if ((error = sx_setup_port(bp, port))) {
+	error = sx_setup_port(bp, port);
+	if (error) {
 		func_enter();
 		return error;
 	}
 
-	if ((error = block_til_ready(tty, filp, port))) {
+	error = block_til_ready(tty, filp, port);
+	if (error) {
 		func_enter();
 		return error;
 	}
@@ -1553,10 +1448,31 @@ static int sx_open(struct tty_struct * tty, struct file * filp)
 	return 0;
 }
 
+static void sx_flush_buffer(struct tty_struct *tty)
+{
+	struct specialix_port *port = tty->driver_data;
+	unsigned long flags;
+	struct specialix_board  *bp;
+
+	func_enter();
 
-static void sx_close(struct tty_struct * tty, struct file * filp)
+	if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
+		func_exit();
+		return;
+	}
+
+	bp = port_Board(port);
+	spin_lock_irqsave(&port->lock, flags);
+	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
+	tty_wakeup(tty);
+
+	func_exit();
+}
+
+static void sx_close(struct tty_struct *tty, struct file *filp)
 {
-	struct specialix_port *port = (struct specialix_port *) tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp;
 	unsigned long flags;
 	unsigned long timeout;
@@ -1575,15 +1491,15 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 	}
 
 	bp = port_Board(port);
-	if ((tty->count == 1) && (port->count != 1)) {
+	if (tty->count == 1 && port->port.count != 1) {
 		printk(KERN_ERR "sx%d: sx_close: bad port count;"
 		       " tty->count is 1, port count is %d\n",
-		       board_No(bp), port->count);
-		port->count = 1;
+		       board_No(bp), port->port.count);
+		port->port.count = 1;
 	}
 
-	if (port->count > 1) {
-		port->count--;
+	if (port->port.count > 1) {
+		port->port.count--;
 		bp->count--;
 
 		spin_unlock_irqrestore(&port->lock, flags);
@@ -1591,26 +1507,25 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 		func_exit();
 		return;
 	}
-	port->flags |= ASYNC_CLOSING;
+	port->port.flags |= ASYNC_CLOSING;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	tty->closing = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
-	dprintk (SX_DEBUG_OPEN, "Closing\n");
-	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
-		tty_wait_until_sent(tty, port->closing_wait);
-	}
+	dprintk(SX_DEBUG_OPEN, "Closing\n");
+	if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, port->port.closing_wait);
 	/*
 	 * At this point we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts, and tell the
 	 * interrupt driver to stop checking the data ready bit in the
 	 * line status register.
 	 */
-	dprintk (SX_DEBUG_OPEN, "Closed\n");
+	dprintk(SX_DEBUG_OPEN, "Closed\n");
 	port->IER &= ~IER_RXD;
-	if (port->flags & ASYNC_INITIALIZED) {
+	if (port->port.flags & ASYNC_INITIALIZED) {
 		port->IER &= ~IER_TXRDY;
 		port->IER |= IER_TXEMPTY;
 		spin_lock_irqsave(&bp->lock, flags);
@@ -1623,11 +1538,11 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 		 * important if there is a transmit FIFO!
 		 */
 		timeout = jiffies+HZ;
-		while(port->IER & IER_TXEMPTY) {
-			set_current_state (TASK_INTERRUPTIBLE);
+		while (port->IER & IER_TXEMPTY) {
+			set_current_state(TASK_INTERRUPTIBLE);
 			msleep_interruptible(jiffies_to_msecs(port->timeout));
 			if (time_after(jiffies, timeout)) {
-				printk (KERN_INFO "Timeout waiting for close\n");
+				printk(KERN_INFO "Timeout waiting for close\n");
 				break;
 			}
 		}
@@ -1635,42 +1550,42 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 	}
 
 	if (--bp->count < 0) {
-		printk(KERN_ERR "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
-		       board_No(bp), bp->count, tty->index);
+		printk(KERN_ERR
+		    "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
+				board_No(bp), bp->count, tty->index);
 		bp->count = 0;
 	}
-	if (--port->count < 0) {
-		printk(KERN_ERR "sx%d: sx_close: bad port count for tty%d: %d\n",
-		       board_No(bp), port_No(port), port->count);
-		port->count = 0;
+	if (--port->port.count < 0) {
+		printk(KERN_ERR
+			"sx%d: sx_close: bad port count for tty%d: %d\n",
+				board_No(bp), port_No(port), port->port.count);
+		port->port.count = 0;
 	}
 
 	sx_shutdown_port(bp, port);
-	if (tty->driver->flush_buffer)
-		tty->driver->flush_buffer(tty);
+	sx_flush_buffer(tty);
 	tty_ldisc_flush(tty);
 	spin_lock_irqsave(&port->lock, flags);
 	tty->closing = 0;
-	port->event = 0;
-	port->tty = NULL;
+	port->port.tty = NULL;
 	spin_unlock_irqrestore(&port->lock, flags);
-	if (port->blocked_open) {
-		if (port->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(port->close_delay));
-		}
-		wake_up_interruptible(&port->open_wait);
+	if (port->port.blocked_open) {
+		if (port->port.close_delay)
+			msleep_interruptible(
+				jiffies_to_msecs(port->port.close_delay));
+		wake_up_interruptible(&port->port.open_wait);
 	}
-	port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&port->close_wait);
+	port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	wake_up_interruptible(&port->port.close_wait);
 
 	func_exit();
 }
 
 
-static int sx_write(struct tty_struct * tty,
-                    const unsigned char *buf, int count)
+static int sx_write(struct tty_struct *tty,
+					const unsigned char *buf, int count)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp;
 	int c, total = 0;
 	unsigned long flags;
@@ -1683,7 +1598,7 @@ static int sx_write(struct tty_struct * tty,
 
 	bp = port_Board(port);
 
-	if (!port->xmit_buf || !tmp_buf) {
+	if (!port->xmit_buf) {
 		func_exit();
 		return 0;
 	}
@@ -1720,48 +1635,50 @@ static int sx_write(struct tty_struct * tty,
 }
 
 
-static void sx_put_char(struct tty_struct * tty, unsigned char ch)
+static int sx_put_char(struct tty_struct *tty, unsigned char ch)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	unsigned long flags;
-	struct specialix_board  * bp;
+	struct specialix_board  *bp;
 
 	func_enter();
 
 	if (sx_paranoia_check(port, tty->name, "sx_put_char")) {
 		func_exit();
-		return;
+		return 0;
 	}
-	dprintk (SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
+	dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
 	if (!port->xmit_buf) {
 		func_exit();
-		return;
+		return 0;
 	}
 	bp = port_Board(port);
 	spin_lock_irqsave(&port->lock, flags);
 
-	dprintk (SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", port->xmit_cnt, port->xmit_buf);
-	if ((port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) || (!port->xmit_buf)) {
+	dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n",
+					port->xmit_cnt, port->xmit_buf);
+	if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) {
 		spin_unlock_irqrestore(&port->lock, flags);
-		dprintk (SX_DEBUG_TX, "Exit size\n");
+		dprintk(SX_DEBUG_TX, "Exit size\n");
 		func_exit();
-		return;
+		return 0;
 	}
-	dprintk (SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
+	dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
 	port->xmit_buf[port->xmit_head++] = ch;
 	port->xmit_head &= SERIAL_XMIT_SIZE - 1;
 	port->xmit_cnt++;
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	func_exit();
+	return 1;
 }
 
 
-static void sx_flush_chars(struct tty_struct * tty)
+static void sx_flush_chars(struct tty_struct *tty)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	unsigned long flags;
-	struct specialix_board  * bp = port_Board(port);
+	struct specialix_board  *bp = port_Board(port);
 
 	func_enter();
 
@@ -1784,9 +1701,9 @@ static void sx_flush_chars(struct tty_struct * tty)
 }
 
 
-static int sx_write_room(struct tty_struct * tty)
+static int sx_write_room(struct tty_struct *tty)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	int	ret;
 
 	func_enter();
@@ -1807,7 +1724,7 @@ static int sx_write_room(struct tty_struct * tty)
 
 static int sx_chars_in_buffer(struct tty_struct *tty)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 
 	func_enter();
 
@@ -1819,65 +1736,39 @@ static int sx_chars_in_buffer(struct tty_struct *tty)
 	return port->xmit_cnt;
 }
 
-
-static void sx_flush_buffer(struct tty_struct *tty)
-{
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
-	unsigned long flags;
-	struct specialix_board  * bp;
-
-	func_enter();
-
-	if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
-		func_exit();
-		return;
-	}
-
-	bp = port_Board(port);
-	spin_lock_irqsave(&port->lock, flags);
-	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
-	tty_wakeup(tty);
-
-	func_exit();
-}
-
-
 static int sx_tiocmget(struct tty_struct *tty, struct file *file)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
-	struct specialix_board * bp;
+	struct specialix_port *port = tty->driver_data;
+	struct specialix_board *bp;
 	unsigned char status;
 	unsigned int result;
 	unsigned long flags;
 
 	func_enter();
 
-	if (sx_paranoia_check(port, tty->name, __FUNCTION__)) {
+	if (sx_paranoia_check(port, tty->name, __func__)) {
 		func_exit();
 		return -ENODEV;
 	}
 
 	bp = port_Board(port);
-	spin_lock_irqsave (&bp->lock, flags);
+	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	status = sx_in(bp, CD186x_MSVR);
 	spin_unlock_irqrestore(&bp->lock, flags);
-	dprintk (SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
-		port_No(port), status, sx_in (bp, CD186x_CAR));
-	dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
-	if (SX_CRTSCTS(port->tty)) {
-		result  = /*   (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
-		          |   ((status & MSVR_DTR) ? TIOCM_RTS : 0)
-		          |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-		          |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
-		          |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
+	dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
+			port_No(port), status, sx_in(bp, CD186x_CAR));
+	dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
+	if (sx_crtscts(port->port.tty)) {
+		result  = TIOCM_DTR | TIOCM_DSR
+			  |   ((status & MSVR_DTR) ? TIOCM_RTS : 0)
+			  |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
+			  |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
 	} else {
-		result  = /*   (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
-		          |   ((status & MSVR_DTR) ? TIOCM_DTR : 0)
-		          |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-		          |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
-		          |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
+		result  = TIOCM_RTS | TIOCM_DSR
+			  |   ((status & MSVR_DTR) ? TIOCM_DTR : 0)
+			  |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
+			  |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
 	}
 
 	func_exit();
@@ -1889,13 +1780,13 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file)
 static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 		       unsigned int set, unsigned int clear)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	unsigned long flags;
 	struct specialix_board *bp;
 
 	func_enter();
 
-	if (sx_paranoia_check(port, tty->name, __FUNCTION__)) {
+	if (sx_paranoia_check(port, tty->name, __func__)) {
 		func_exit();
 		return -ENODEV;
 	}
@@ -1903,57 +1794,50 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 	bp = port_Board(port);
 
 	spin_lock_irqsave(&port->lock, flags);
-   /*	if (set & TIOCM_RTS)
-		port->MSVR |= MSVR_RTS; */
-   /*   if (set & TIOCM_DTR)
-		port->MSVR |= MSVR_DTR; */
-
-	if (SX_CRTSCTS(port->tty)) {
+	if (sx_crtscts(port->port.tty)) {
 		if (set & TIOCM_RTS)
 			port->MSVR |= MSVR_DTR;
 	} else {
 		if (set & TIOCM_DTR)
 			port->MSVR |= MSVR_DTR;
 	}
-
-  /*	if (clear & TIOCM_RTS)
-		port->MSVR &= ~MSVR_RTS; */
-  /*    if (clear & TIOCM_DTR)
-		port->MSVR &= ~MSVR_DTR; */
-	if (SX_CRTSCTS(port->tty)) {
+	if (sx_crtscts(port->port.tty)) {
 		if (clear & TIOCM_RTS)
 			port->MSVR &= ~MSVR_DTR;
 	} else {
 		if (clear & TIOCM_DTR)
 			port->MSVR &= ~MSVR_DTR;
 	}
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 	func_exit();
 	return 0;
 }
 
 
-static inline void sx_send_break(struct specialix_port * port, unsigned long length)
+static int sx_send_break(struct tty_struct *tty, int length)
 {
+	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp = port_Board(port);
 	unsigned long flags;
 
 	func_enter();
+	if (length == 0 || length == -1)
+		return -EOPNOTSUPP;
 
-	spin_lock_irqsave (&port->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
 	port->break_length = SPECIALIX_TPS / HZ * length;
 	port->COR2 |= COR2_ETC;
 	port->IER  |= IER_TXRDY;
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_COR2, port->COR2);
 	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	spin_unlock_irqrestore (&port->lock, flags);
+	spin_unlock(&bp->lock);
+	spin_unlock_irqrestore(&port->lock, flags);
 	sx_wait_CCR(bp);
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CCR, CCR_CORCHG2);
@@ -1961,72 +1845,59 @@ static inline void sx_send_break(struct specialix_port * port, unsigned long len
 	sx_wait_CCR(bp);
 
 	func_exit();
+	return 0;
 }
 
 
-static inline int sx_set_serial_info(struct specialix_port * port,
-                                     struct serial_struct __user * newinfo)
+static int sx_set_serial_info(struct specialix_port *port,
+					struct serial_struct __user *newinfo)
 {
 	struct serial_struct tmp;
 	struct specialix_board *bp = port_Board(port);
 	int change_speed;
 
 	func_enter();
-	/*
-	if (!access_ok(VERIFY_READ, (void *) newinfo, sizeof(tmp))) {
-		func_exit();
-		return -EFAULT;
-	}
-	*/
+
 	if (copy_from_user(&tmp, newinfo, sizeof(tmp))) {
 		func_enter();
 		return -EFAULT;
 	}
 
-#if 0
-	if ((tmp.irq != bp->irq) ||
-	    (tmp.port != bp->base) ||
-	    (tmp.type != PORT_CIRRUS) ||
-	    (tmp.baud_base != (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC) ||
-	    (tmp.custom_divisor != 0) ||
-	    (tmp.xmit_fifo_size != CD186x_NFIFO) ||
-	    (tmp.flags & ~SPECIALIX_LEGAL_FLAGS)) {
-		func_exit();
-		return -EINVAL;
-	}
-#endif
+	lock_kernel();
 
-	change_speed = ((port->flags & ASYNC_SPD_MASK) !=
+	change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
 			(tmp.flags & ASYNC_SPD_MASK));
 	change_speed |= (tmp.custom_divisor != port->custom_divisor);
 
 	if (!capable(CAP_SYS_ADMIN)) {
-		if ((tmp.close_delay != port->close_delay) ||
-		    (tmp.closing_wait != port->closing_wait) ||
+		if ((tmp.close_delay != port->port.close_delay) ||
+		    (tmp.closing_wait != port->port.closing_wait) ||
 		    ((tmp.flags & ~ASYNC_USR_MASK) !=
-		     (port->flags & ~ASYNC_USR_MASK))) {
+		     (port->port.flags & ~ASYNC_USR_MASK))) {
 			func_exit();
+			unlock_kernel();
 			return -EPERM;
 		}
-		port->flags = ((port->flags & ~ASYNC_USR_MASK) |
-		                  (tmp.flags & ASYNC_USR_MASK));
+		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
+						(tmp.flags & ASYNC_USR_MASK));
 		port->custom_divisor = tmp.custom_divisor;
 	} else {
-		port->flags = ((port->flags & ~ASYNC_FLAGS) |
-		                  (tmp.flags & ASYNC_FLAGS));
-		port->close_delay = tmp.close_delay;
-		port->closing_wait = tmp.closing_wait;
+		port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
+						(tmp.flags & ASYNC_FLAGS));
+		port->port.close_delay = tmp.close_delay;
+		port->port.closing_wait = tmp.closing_wait;
 		port->custom_divisor = tmp.custom_divisor;
 	}
-	if (change_speed) {
+	if (change_speed)
 		sx_change_speed(bp, port);
-	}
+
 	func_exit();
+	unlock_kernel();
 	return 0;
 }
 
 
-static inline int sx_get_serial_info(struct specialix_port * port,
+static int sx_get_serial_info(struct specialix_port *port,
 				     struct serial_struct __user *retinfo)
 {
 	struct serial_struct tmp;
@@ -2034,22 +1905,19 @@ static inline int sx_get_serial_info(struct specialix_port * port,
 
 	func_enter();
 
-	/*
-	if (!access_ok(VERIFY_WRITE, (void *) retinfo, sizeof(tmp)))
-		return -EFAULT;
-	*/
-
 	memset(&tmp, 0, sizeof(tmp));
+	lock_kernel();
 	tmp.type = PORT_CIRRUS;
 	tmp.line = port - sx_port;
 	tmp.port = bp->base;
 	tmp.irq  = bp->irq;
-	tmp.flags = port->flags;
+	tmp.flags = port->port.flags;
 	tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC;
-	tmp.close_delay = port->close_delay * HZ/100;
-	tmp.closing_wait = port->closing_wait * HZ/100;
+	tmp.close_delay = port->port.close_delay * HZ/100;
+	tmp.closing_wait = port->port.closing_wait * HZ/100;
 	tmp.custom_divisor =  port->custom_divisor;
 	tmp.xmit_fifo_size = CD186x_NFIFO;
+	unlock_kernel();
 	if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
 		func_exit();
 		return -EFAULT;
@@ -2060,11 +1928,10 @@ static inline int sx_get_serial_info(struct specialix_port * port,
 }
 
 
-static int sx_ioctl(struct tty_struct * tty, struct file * filp,
-                    unsigned int cmd, unsigned long arg)
+static int sx_ioctl(struct tty_struct *tty, struct file *filp,
+				unsigned int cmd, unsigned long arg)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
-	int retval;
+	struct specialix_port *port = tty->driver_data;
 	void __user *argp = (void __user *)arg;
 
 	func_enter();
@@ -2075,51 +1942,14 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
 	}
 
 	switch (cmd) {
-	 case TCSBRK:	/* SVID version: non-zero arg --> no break */
-		retval = tty_check_change(tty);
-		if (retval) {
-			func_exit();
-			return retval;
-		}
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			sx_send_break(port, HZ/4);	/* 1/4 second */
-		return 0;
-	 case TCSBRKP:	/* support for POSIX tcsendbreak() */
-		retval = tty_check_change(tty);
-		if (retval) {
-			func_exit();
-			return retval;
-		}
-		tty_wait_until_sent(tty, 0);
-		sx_send_break(port, arg ? arg*(HZ/10) : HZ/4);
+	case TIOCGSERIAL:
 		func_exit();
-		return 0;
-	 case TIOCGSOFTCAR:
-		 if (put_user(C_CLOCAL(tty)?1:0, (unsigned long __user *)argp)) {
-			 func_exit();
-			 return -EFAULT;
-		 }
-		 func_exit();
-		return 0;
-	 case TIOCSSOFTCAR:
-		 if (get_user(arg, (unsigned long __user *) argp)) {
-			 func_exit();
-			 return -EFAULT;
-		 }
-		tty->termios->c_cflag =
-			((tty->termios->c_cflag & ~CLOCAL) |
-			(arg ? CLOCAL : 0));
-		func_exit();
-		return 0;
-	 case TIOCGSERIAL:
-		 func_exit();
 		return sx_get_serial_info(port, argp);
-	 case TIOCSSERIAL:
-		 func_exit();
+	case TIOCSSERIAL:
+		func_exit();
 		return sx_set_serial_info(port, argp);
-	 default:
-		 func_exit();
+	default:
+		func_exit();
 		return -ENOIOCTLCMD;
 	}
 	func_exit();
@@ -2127,9 +1957,9 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
 }
 
 
-static void sx_throttle(struct tty_struct * tty)
+static void sx_throttle(struct tty_struct *tty)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp;
 	unsigned long flags;
 
@@ -2143,21 +1973,21 @@ static void sx_throttle(struct tty_struct * tty)
 	bp = port_Board(port);
 
 	/* Use DTR instead of RTS ! */
-	if (SX_CRTSCTS (tty))
+	if (sx_crtscts(tty))
 		port->MSVR &= ~MSVR_DTR;
 	else {
 		/* Auch!!! I think the system shouldn't call this then. */
 		/* Or maybe we're supposed (allowed?) to do our side of hw
 		   handshake anyway, even when hardware handshake is off.
 		   When you see this in your logs, please report.... */
-		printk (KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n",
-	                 port_No (port));
+		printk(KERN_ERR
+		   "sx%d: Need to throttle, but can't (hardware hs is off)\n",
+							port_No(port));
 	}
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	spin_unlock_irqrestore(&bp->lock, flags);
 	if (I_IXOFF(tty)) {
-		spin_unlock_irqrestore(&bp->lock, flags);
 		sx_wait_CCR(bp);
 		spin_lock_irqsave(&bp->lock, flags);
 		sx_out(bp, CD186x_CCR, CCR_SSCH2);
@@ -2172,9 +2002,9 @@ static void sx_throttle(struct tty_struct * tty)
 }
 
 
-static void sx_unthrottle(struct tty_struct * tty)
+static void sx_unthrottle(struct tty_struct *tty)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp;
 	unsigned long flags;
 
@@ -2189,12 +2019,12 @@ static void sx_unthrottle(struct tty_struct * tty)
 
 	spin_lock_irqsave(&port->lock, flags);
 	/* XXXX Use DTR INSTEAD???? */
-	if (SX_CRTSCTS(tty)) {
+	if (sx_crtscts(tty))
 		port->MSVR |= MSVR_DTR;
-	} /* Else clause: see remark in "sx_throttle"... */
-	spin_lock_irqsave(&bp->lock, flags);
+	/* Else clause: see remark in "sx_throttle"... */
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	if (I_IXOFF(tty)) {
 		spin_unlock_irqrestore(&port->lock, flags);
 		sx_wait_CCR(bp);
@@ -2204,18 +2034,18 @@ static void sx_unthrottle(struct tty_struct * tty)
 		sx_wait_CCR(bp);
 		spin_lock_irqsave(&port->lock, flags);
 	}
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	func_exit();
 }
 
 
-static void sx_stop(struct tty_struct * tty)
+static void sx_stop(struct tty_struct *tty)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp;
 	unsigned long flags;
 
@@ -2230,19 +2060,19 @@ static void sx_stop(struct tty_struct * tty)
 
 	spin_lock_irqsave(&port->lock, flags);
 	port->IER &= ~IER_TXRDY;
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	func_exit();
 }
 
 
-static void sx_start(struct tty_struct * tty)
+static void sx_start(struct tty_struct *tty)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp;
 	unsigned long flags;
 
@@ -2258,44 +2088,19 @@ static void sx_start(struct tty_struct * tty)
 	spin_lock_irqsave(&port->lock, flags);
 	if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
 		port->IER |= IER_TXRDY;
-		spin_lock_irqsave(&bp->lock, flags);
+		spin_lock(&bp->lock);
 		sx_out(bp, CD186x_CAR, port_No(port));
 		sx_out(bp, CD186x_IER, port->IER);
-		spin_unlock_irqrestore(&bp->lock, flags);
+		spin_unlock(&bp->lock);
 	}
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	func_exit();
 }
 
-
-/*
- * This routine is called from the work-queue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (workqueue) ->
- * 	do_sx_hangup() -> tty->hangup() -> sx_hangup()
- *
- */
-static void do_sx_hangup(void *private_)
-{
-	struct specialix_port	*port = (struct specialix_port *) private_;
-	struct tty_struct	*tty;
-
-	func_enter();
-
-	tty = port->tty;
-	if (tty)
-		tty_hangup(tty);	/* FIXME: module removal race here */
-
-	func_exit();
-}
-
-
-static void sx_hangup(struct tty_struct * tty)
+static void sx_hangup(struct tty_struct *tty)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp;
 	unsigned long flags;
 
@@ -2310,36 +2115,33 @@ static void sx_hangup(struct tty_struct * tty)
 
 	sx_shutdown_port(bp, port);
 	spin_lock_irqsave(&port->lock, flags);
-	port->event = 0;
-	bp->count -= port->count;
+	bp->count -= port->port.count;
 	if (bp->count < 0) {
-		printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n",
-			board_No(bp), bp->count, tty->index);
+		printk(KERN_ERR
+			"sx%d: sx_hangup: bad board count: %d port: %d\n",
+					board_No(bp), bp->count, tty->index);
 		bp->count = 0;
 	}
-	port->count = 0;
-	port->flags &= ~ASYNC_NORMAL_ACTIVE;
-	port->tty = NULL;
+	port->port.count = 0;
+	port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+	port->port.tty = NULL;
 	spin_unlock_irqrestore(&port->lock, flags);
-	wake_up_interruptible(&port->open_wait);
+	wake_up_interruptible(&port->port.open_wait);
 
 	func_exit();
 }
 
 
-static void sx_set_termios(struct tty_struct * tty, struct termios * old_termios)
+static void sx_set_termios(struct tty_struct *tty,
+					struct ktermios *old_termios)
 {
-	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
+	struct specialix_port *port = tty->driver_data;
 	unsigned long flags;
-	struct specialix_board  * bp;
+	struct specialix_board  *bp;
 
 	if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
 		return;
 
-	if (tty->termios->c_cflag == old_termios->c_cflag &&
-	    tty->termios->c_iflag == old_termios->c_iflag)
-		return;
-
 	bp = port_Board(port);
 	spin_lock_irqsave(&port->lock, flags);
 	sx_change_speed(port_Board(port), port);
@@ -2352,28 +2154,7 @@ static void sx_set_termios(struct tty_struct * tty, struct termios * old_termios
 	}
 }
 
-
-static void do_softint(void *private_)
-{
-	struct specialix_port	*port = (struct specialix_port *) private_;
-	struct tty_struct	*tty;
-
-	func_enter();
-
-	if(!(tty = port->tty)) {
-		func_exit();
-		return;
-	}
-
-	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) {
- 		tty_wakeup(tty);
-		//wake_up_interruptible(&tty->write_wait);
-	}
-
-	func_exit();
-}
-
-static struct tty_operations sx_ops = {
+static const struct tty_operations sx_ops = {
 	.open  = sx_open,
 	.close = sx_close,
 	.write = sx_write,
@@ -2391,6 +2172,7 @@ static struct tty_operations sx_ops = {
 	.hangup = sx_hangup,
 	.tiocmget = sx_tiocmget,
 	.tiocmset = sx_tiocmset,
+	.break_ctl = sx_send_break,
 };
 
 static int sx_init_drivers(void)
@@ -2407,12 +2189,6 @@ static int sx_init_drivers(void)
 		return 1;
 	}
 
-	if (!(tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL))) {
-		printk(KERN_ERR "sx: Couldn't get free page.\n");
-		put_tty_driver(specialix_driver);
-		func_exit();
-		return 1;
-	}
 	specialix_driver->owner = THIS_MODULE;
 	specialix_driver->name = "ttyW";
 	specialix_driver->major = SPECIALIX_NORMAL_MAJOR;
@@ -2421,26 +2197,25 @@ static int sx_init_drivers(void)
 	specialix_driver->init_termios = tty_std_termios;
 	specialix_driver->init_termios.c_cflag =
 		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	specialix_driver->flags = TTY_DRIVER_REAL_RAW;
+	specialix_driver->init_termios.c_ispeed = 9600;
+	specialix_driver->init_termios.c_ospeed = 9600;
+	specialix_driver->flags = TTY_DRIVER_REAL_RAW |
+						TTY_DRIVER_HARDWARE_BREAK;
 	tty_set_operations(specialix_driver, &sx_ops);
 
-	if ((error = tty_register_driver(specialix_driver))) {
+	error = tty_register_driver(specialix_driver);
+	if (error) {
 		put_tty_driver(specialix_driver);
-		free_page((unsigned long)tmp_buf);
-		printk(KERN_ERR "sx: Couldn't register specialix IO8+ driver, error = %d\n",
-		       error);
+		printk(KERN_ERR
+		  "sx: Couldn't register specialix IO8+ driver, error = %d\n",
+								error);
 		func_exit();
 		return 1;
 	}
 	memset(sx_port, 0, sizeof(sx_port));
 	for (i = 0; i < SX_NPORT * SX_NBOARD; i++) {
 		sx_port[i].magic = SPECIALIX_MAGIC;
-		INIT_WORK(&sx_port[i].tqueue, do_softint, &sx_port[i]);
-		INIT_WORK(&sx_port[i].tqueue_hangup, do_sx_hangup, &sx_port[i]);
-		sx_port[i].close_delay = 50 * HZ/100;
-		sx_port[i].closing_wait = 3000 * HZ/100;
-		init_waitqueue_head(&sx_port[i].open_wait);
-		init_waitqueue_head(&sx_port[i].close_wait);
+		tty_port_init(&sx_port[i].port);
 		spin_lock_init(&sx_port[i].lock);
 	}
 
@@ -2452,7 +2227,6 @@ static void sx_release_drivers(void)
 {
 	func_enter();
 
-	free_page((unsigned long)tmp_buf);
 	tty_unregister_driver(specialix_driver);
 	put_tty_driver(specialix_driver);
 	func_exit();
@@ -2470,14 +2244,14 @@ static int __init specialix_init(void)
 
 	printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
 	printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
-#ifdef CONFIG_SPECIALIX_RTSCTS
-	printk (KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
-#else
-	printk (KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
-#endif
+	if (sx_rtscts)
+		printk(KERN_INFO
+			"sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
+	else
+		printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
 
 	for (i = 0; i < SX_NBOARD; i++)
-		sx_board[i].lock = SPIN_LOCK_UNLOCKED;
+		spin_lock_init(&sx_board[i].lock);
 
 	if (sx_init_drivers()) {
 		func_exit();
@@ -2492,28 +2266,31 @@ static int __init specialix_init(void)
 	{
 		struct pci_dev *pdev = NULL;
 
-		i=0;
+		i = 0;
 		while (i < SX_NBOARD) {
 			if (sx_board[i].flags & SX_BOARD_PRESENT) {
 				i++;
 				continue;
 			}
-			pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX,
-			                        PCI_DEVICE_ID_SPECIALIX_IO8,
-			                        pdev);
-			if (!pdev) break;
+			pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX,
+					PCI_DEVICE_ID_SPECIALIX_IO8, pdev);
+			if (!pdev)
+				break;
 
 			if (pci_enable_device(pdev))
 				continue;
 
 			sx_board[i].irq = pdev->irq;
 
-			sx_board[i].base = pci_resource_start (pdev, 2);
+			sx_board[i].base = pci_resource_start(pdev, 2);
 
 			sx_board[i].flags |= SX_BOARD_IS_PCI;
 			if (!sx_probe(&sx_board[i]))
-				found ++;
+				found++;
 		}
+		/* May exit pci_get sequence early with lots of boards */
+		if (pdev != NULL)
+			pci_dev_put(pdev);
 	}
 #endif
 
@@ -2529,16 +2306,13 @@ static int __init specialix_init(void)
 }
 
 static int iobase[SX_NBOARD]  = {0,};
-
-static int irq [SX_NBOARD] = {0,};
+static int irq[SX_NBOARD] = {0,};
 
 module_param_array(iobase, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
 module_param(sx_debug, int, 0);
+module_param(sx_rtscts, int, 0);
 module_param(sx_rxfifo, int, 0);
-#ifdef SPECIALIX_TIMER
-module_param(sx_poll, int, 0);
-#endif
 
 /*
  * You can setup up to 4 boards.
@@ -2556,10 +2330,10 @@ static int __init specialix_init_module(void)
 	func_enter();
 
 	if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) {
-		for(i = 0; i < SX_NBOARD; i++) {
+		for (i = 0; i < SX_NBOARD; i++) {
 			sx_board[i].base = iobase[i];
 			sx_board[i].irq = irq[i];
-			sx_board[i].count= 0;
+			sx_board[i].count = 0;
 		}
 	}
 
@@ -2578,14 +2352,17 @@ static void __exit specialix_exit_module(void)
 	for (i = 0; i < SX_NBOARD; i++)
 		if (sx_board[i].flags & SX_BOARD_PRESENT)
 			sx_release_io_range(&sx_board[i]);
-#ifdef SPECIALIX_TIMER
-	del_timer (&missed_irq_timer);
-#endif
-
 	func_exit();
 }
 
+static struct pci_device_id specialx_pci_tbl[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, specialx_pci_tbl);
+
 module_init(specialix_init_module);
 module_exit(specialix_exit_module);
 
 MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR);