X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fchar%2Fmxser.c;h=d2692d443f7bf9b721ba52e9b376883c2bf1e16e;hb=e854df613fe934c94a0b39eccb4104e72ccbbded;hp=3b965a651da4352cf91b91ca6f9a11fd7663929c;hpb=6f08b72cdd4b99a190c4e1fcddd63b401e5b572d;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 3b965a6..d2692d4 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1,45 +1,25 @@ /* * mxser.c -- MOXA Smartio/Industio family multiport serial driver. * - * Copyright (C) 1999-2001 Moxa Technologies (support@moxa.com.tw). + * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). + * Copyright (C) 2006-2008 Jiri Slaby * - * This code is loosely based on the Linux serial driver, written by - * Linus Torvalds, Theodore T'so and others. + * This code is loosely based on the 1.8 moxa driver which is based on + * Linux serial driver, written by Linus Torvalds, Theodore T'so and + * others. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Original release 10/26/00 - * - * 02/06/01 Support MOXA Industio family boards. - * 02/06/01 Support TIOCGICOUNT. - * 02/06/01 Fix the problem for connecting to serial mouse. - * 02/06/01 Fix the problem for H/W flow control. - * 02/06/01 Fix the compling warning when CONFIG_PCI - * don't be defined. + * (at your option) any later version. * * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * . The original 1.8 code is available on www.moxa.com. + * . The original 1.8 code is available on + * www.moxa.com. * - Fixed x86_64 cleanness - * - Fixed sleep with spinlock held in mxser_send_break */ - -#include #include -#include -#include #include #include #include @@ -53,49 +33,47 @@ #include #include #include -#include #include #include -#include #include #include +#include +#include #include #include #include -#include #include #include "mxser.h" -#define MXSER_VERSION "1.8" +#define MXSER_VERSION "2.0.5" /* 1.14 */ #define MXSERMAJOR 174 -#define MXSERCUMAJOR 175 - -#define MXSER_EVENT_TXLOW 1 -#define MXSER_EVENT_HANGUP 2 #define MXSER_BOARDS 4 /* Max. boards */ -#define MXSER_PORTS 32 /* Max. ports */ #define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ -#define MXSER_ISR_PASS_LIMIT 256 +#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) +#define MXSER_ISR_PASS_LIMIT 100 -#define MXSER_ERR_IOADDR -1 -#define MXSER_ERR_IRQ -2 -#define MXSER_ERR_IRQ_CONFLIT -3 -#define MXSER_ERR_VECTOR -4 - -#define SERIAL_TYPE_NORMAL 1 -#define SERIAL_TYPE_CALLOUT 2 +/*CheckIsMoxaMust return value*/ +#define MOXA_OTHER_UART 0x00 +#define MOXA_MUST_MU150_HWID 0x01 +#define MOXA_MUST_MU860_HWID 0x02 #define WAKEUP_CHARS 256 #define UART_MCR_AFE 0x20 #define UART_LSR_SPECIAL 0x1E -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|IXON|IXOFF)) +#define PCI_DEVICE_ID_POS104UL 0x1044 +#define PCI_DEVICE_ID_CB108 0x1080 +#define PCI_DEVICE_ID_CP102UF 0x1023 +#define PCI_DEVICE_ID_CP112UL 0x1120 +#define PCI_DEVICE_ID_CB114 0x1142 +#define PCI_DEVICE_ID_CP114UL 0x1143 +#define PCI_DEVICE_ID_CB134I 0x1341 +#define PCI_DEVICE_ID_CP138U 0x1380 -#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT) #define C168_ASIC_ID 1 #define C104_ASIC_ID 2 @@ -104,88 +82,11 @@ #define CI134_ASIC_ID 3 #define CI104J_ASIC_ID 5 -enum { - MXSER_BOARD_C168_ISA = 1, - MXSER_BOARD_C104_ISA, - MXSER_BOARD_CI104J, - MXSER_BOARD_C168_PCI, - MXSER_BOARD_C104_PCI, - MXSER_BOARD_C102_ISA, - MXSER_BOARD_CI132, - MXSER_BOARD_CI134, - MXSER_BOARD_CP132, - MXSER_BOARD_CP114, - MXSER_BOARD_CT114, - MXSER_BOARD_CP102, - MXSER_BOARD_CP104U, - MXSER_BOARD_CP168U, - MXSER_BOARD_CP132U, - MXSER_BOARD_CP134U, - MXSER_BOARD_CP104JU, - MXSER_BOARD_RC7000, - MXSER_BOARD_CP118U, - MXSER_BOARD_CP102UL, - MXSER_BOARD_CP102U, -}; - -static char *mxser_brdname[] = { - "C168 series", - "C104 series", - "CI-104J series", - "C168H/PCI series", - "C104H/PCI series", - "C102 series", - "CI-132 series", - "CI-134 series", - "CP-132 series", - "CP-114 series", - "CT-114 series", - "CP-102 series", - "CP-104U series", - "CP-168U series", - "CP-132U series", - "CP-134U series", - "CP-104JU series", - "Moxa UC7000 Serial", - "CP-118U series", - "CP-102UL series", - "CP-102U series", -}; - -static int mxser_numports[] = { - 8, // C168-ISA - 4, // C104-ISA - 4, // CI104J - 8, // C168-PCI - 4, // C104-PCI - 2, // C102-ISA - 2, // CI132 - 4, // CI134 - 2, // CP132 - 4, // CP114 - 4, // CT114 - 2, // CP102 - 4, // CP104U - 8, // CP168U - 2, // CP132U - 4, // CP134U - 4, // CP104JU - 8, // RC7000 - 8, // CP118U - 2, // CP102UL - 2, // CP102U -}; - -#define UART_TYPE_NUM 2 - -static const unsigned int Gmoxa_uart_id[UART_TYPE_NUM] = { - MOXA_MUST_MU150_HWID, - MOXA_MUST_MU860_HWID -}; +#define MXSER_HIGHBAUD 1 +#define MXSER_HAS2 2 -// This is only for PCI -#define UART_INFO_NUM 3 -struct mxpciuart_info { +/* This is only for PCI */ +static const struct { int type; int tx_fifo; int rx_fifo; @@ -194,60 +95,97 @@ struct mxpciuart_info { int rx_trigger; int rx_low_water; long max_baud; -}; - -static const struct mxpciuart_info Gpci_uart_info[UART_INFO_NUM] = { +} Gpci_uart_info[] = { {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} }; +#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) +struct mxser_cardinfo { + char *name; + unsigned int nports; + unsigned int flags; +}; -#ifdef CONFIG_PCI +static const struct mxser_cardinfo mxser_cards[] = { +/* 0*/ { "C168 series", 8, }, + { "C104 series", 4, }, + { "CI-104J series", 4, }, + { "C168H/PCI series", 8, }, + { "C104H/PCI series", 4, }, +/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */ + { "CI-132 series", 4, MXSER_HAS2 }, + { "CI-134 series", 4, }, + { "CP-132 series", 2, }, + { "CP-114 series", 4, }, +/*10*/ { "CT-114 series", 4, }, + { "CP-102 series", 2, MXSER_HIGHBAUD }, + { "CP-104U series", 4, }, + { "CP-168U series", 8, }, + { "CP-132U series", 2, }, +/*15*/ { "CP-134U series", 4, }, + { "CP-104JU series", 4, }, + { "Moxa UC7000 Serial", 8, }, /* RC7000 */ + { "CP-118U series", 8, }, + { "CP-102UL series", 2, }, +/*20*/ { "CP-102U series", 2, }, + { "CP-118EL series", 8, }, + { "CP-168EL series", 8, }, + { "CP-104EL series", 4, }, + { "CB-108 series", 8, }, +/*25*/ { "CB-114 series", 4, }, + { "CB-134I series", 4, }, + { "CP-138U series", 8, }, + { "POS-104UL series", 4, }, + { "CP-114UL series", 4, }, +/*30*/ { "CP-102UF series", 2, }, + { "CP-112UL series", 2, }, +}; +/* driver_data correspond to the lines in the structure above + see also ISA probe function before you change something */ static struct pci_device_id mxser_pcibrds[] = { - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C168_PCI}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C104_PCI}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP114}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CT114}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP168U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP134U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104JU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104JU}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_RC7000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_RC7000}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP118U}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102UL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102UL}, - {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102U}, - {0} + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 }, + { } }; - MODULE_DEVICE_TABLE(pci, mxser_pcibrds); - -#endif - -typedef struct _moxa_pci_info { - unsigned short busNum; - unsigned short devNum; - struct pci_dev *pdev; // add by Victor Yu. 06-23-2003 -} moxa_pci_info; - -static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 }; +static unsigned long ioaddr[MXSER_BOARDS]; static int ttymajor = MXSERMAJOR; -static int calloutmajor = MXSERCUMAJOR; -static int verbose = 0; /* Variables for insmod */ MODULE_AUTHOR("Casper Yang"); MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -MODULE_PARM(ioaddr, "1-4i"); -MODULE_PARM(ttymajor, "i"); -MODULE_PARM(calloutmajor, "i"); -MODULE_PARM(verbose, "i"); +module_param_array(ioaddr, ulong, NULL, 0); +MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); +module_param(ttymajor, int, 0); MODULE_LICENSE("GPL"); struct mxser_log { @@ -256,7 +194,6 @@ struct mxser_log { unsigned long txcnt[MXSER_PORTS]; }; - struct mxser_mon { unsigned long rxcnt; unsigned long txcnt; @@ -281,71 +218,62 @@ struct mxser_mon_ext { int fifo[32]; int iftype[32]; }; -struct mxser_hwconf { - int board_type; - int ports; - int irq; - int vector; - int vector_mask; - int uart_type; - int ioaddr[MXSER_PORTS_PER_BOARD]; - int baud_base[MXSER_PORTS_PER_BOARD]; - moxa_pci_info pciInfo; - int IsMoxaMustChipFlag; // add by Victor Yu. 08-30-2002 - int MaxCanSetBaudRate[MXSER_PORTS_PER_BOARD]; // add by Victor Yu. 09-04-2002 - int opmode_ioaddr[MXSER_PORTS_PER_BOARD]; // add by Victor Yu. 01-05-2004 -}; -struct mxser_struct { - int port; - int base; /* port base address */ - int irq; /* port using irq no. */ - int vector; /* port irq vector */ - int vectormask; /* port vector mask */ +struct mxser_board; + +struct mxser_port { + struct tty_port port; + struct mxser_board *board; + + unsigned long ioaddr; + unsigned long opmode_ioaddr; + int max_baud; + int rx_high_water; int rx_trigger; /* Rx fifo trigger level */ int rx_low_water; int baud_base; /* max. speed */ - int flags; /* defined in tty.h */ int type; /* UART type */ - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int xmit_fifo_size; - int custom_divisor; + int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ - unsigned long event; - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - long session; /* Session of opening process */ - long pgrp; /* pgrp of opening process */ - unsigned char *xmit_buf; + + unsigned char stop_rx; + unsigned char ldisc_stop_rx; + + int custom_divisor; + unsigned char err_shadow; + + struct async_icount icount; /* kernel counters for 4 input interrupts */ + int timeout; + + int read_status_mask; + int ignore_status_mask; + int xmit_fifo_size; int xmit_head; int xmit_tail; int xmit_cnt; - struct work_struct tqueue; - struct termios normal_termios; - struct termios callout_termios; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - wait_queue_head_t delta_msr_wait; - struct async_icount icount; /* kernel counters for the 4 input interrupts */ - int timeout; - int IsMoxaMustChipFlag; // add by Victor Yu. 08-30-2002 - int MaxCanSetBaudRate; // add by Victor Yu. 09-04-2002 - int opmode_ioaddr; // add by Victor Yu. 01-05-2004 - unsigned char stop_rx; - unsigned char ldisc_stop_rx; - long realbaud; + + struct ktermios normal_termios; + struct mxser_mon mon_data; - unsigned char err_shadow; + spinlock_t slock; }; +struct mxser_board { + unsigned int idx; + int irq; + const struct mxser_cardinfo *info; + unsigned long vector; + unsigned long vector_mask; + + int chip_flag; + int uart_type; + + struct mxser_port ports[MXSER_PORTS_PER_BOARD]; +}; struct mxser_mstatus { tcflag_t cflag; @@ -355,1394 +283,1683 @@ struct mxser_mstatus { int dcd; }; -static struct mxser_mstatus GMStatus[MXSER_PORTS]; - -static int mxserBoardCAP[MXSER_BOARDS] = { - 0, 0, 0, 0 - /* 0x180, 0x280, 0x200, 0x320 */ -}; - +static struct mxser_board mxser_boards[MXSER_BOARDS]; static struct tty_driver *mxvar_sdriver; -static struct mxser_struct mxvar_table[MXSER_PORTS]; -static struct tty_struct *mxvar_tty[MXSER_PORTS + 1]; -static struct termios *mxvar_termios[MXSER_PORTS + 1]; -static struct termios *mxvar_termios_locked[MXSER_PORTS + 1]; static struct mxser_log mxvar_log; -static int mxvar_diagflag; -static unsigned char mxser_msr[MXSER_PORTS + 1]; -static struct mxser_mon_ext mon_data_ext; static int mxser_set_baud_method[MXSER_PORTS + 1]; -static spinlock_t gm_lock; -/* - * This is used to figure out the divisor speeds and the timeouts - */ +static void mxser_enable_must_enchance_mode(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; -static struct mxser_hwconf mxsercfg[MXSER_BOARDS]; + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); -/* - * static functions: - */ + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr |= MOXA_MUST_EFR_EFRB_ENABLE; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} -static void mxser_getcfg(int board, struct mxser_hwconf *hwconf); -static int mxser_init(void); - -//static void mxser_poll(unsigned long); -static int mxser_get_ISA_conf(int, struct mxser_hwconf *); -static int mxser_get_PCI_conf(int, int, int, struct mxser_hwconf *); -static void mxser_do_softint(void *); -static int mxser_open(struct tty_struct *, struct file *); -static void mxser_close(struct tty_struct *, struct file *); -static int mxser_write(struct tty_struct *, const unsigned char *, int); -static int mxser_write_room(struct tty_struct *); -static void mxser_flush_buffer(struct tty_struct *); -static int mxser_chars_in_buffer(struct tty_struct *); -static void mxser_flush_chars(struct tty_struct *); -static void mxser_put_char(struct tty_struct *, unsigned char); -static int mxser_ioctl(struct tty_struct *, struct file *, uint, ulong); -static int mxser_ioctl_special(unsigned int, void __user *); -static void mxser_throttle(struct tty_struct *); -static void mxser_unthrottle(struct tty_struct *); -static void mxser_set_termios(struct tty_struct *, struct termios *); -static void mxser_stop(struct tty_struct *); -static void mxser_start(struct tty_struct *); -static void mxser_hangup(struct tty_struct *); -static void mxser_rs_break(struct tty_struct *, int); -static irqreturn_t mxser_interrupt(int, void *, struct pt_regs *); -static void mxser_receive_chars(struct mxser_struct *, int *); -static void mxser_transmit_chars(struct mxser_struct *); -static void mxser_check_modem_status(struct mxser_struct *, int); -static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *); -static int mxser_startup(struct mxser_struct *); -static void mxser_shutdown(struct mxser_struct *); -static int mxser_change_speed(struct mxser_struct *, struct termios *old_termios); -static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *); -static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *); -static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *); -static void mxser_send_break(struct mxser_struct *, int); -static int mxser_tiocmget(struct tty_struct *, struct file *); -static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); -static int mxser_set_baud(struct mxser_struct *info, long newspd); -static void mxser_wait_until_sent(struct tty_struct *tty, int timeout); - -static void mxser_startrx(struct tty_struct *tty); -static void mxser_stoprx(struct tty_struct *tty); - - -static int CheckIsMoxaMust(int io) +static void mxser_disable_must_enchance_mode(unsigned long baseio) { - u8 oldmcr, hwid; - int i; + u8 oldlcr; + u8 efr; - outb(0, io + UART_LCR); - DISABLE_MOXA_MUST_ENCHANCE_MODE(io); - oldmcr = inb(io + UART_MCR); - outb(0, io + UART_MCR); - SET_MOXA_MUST_XON1_VALUE(io, 0x11); - if ((hwid = inb(io + UART_MCR)) != 0) { - outb(oldmcr, io + UART_MCR); - return (MOXA_OTHER_UART); - } + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - GET_MOXA_MUST_HARDWARE_ID(io, &hwid); - for (i = 0; i < UART_TYPE_NUM; i++) { - if (hwid == Gmoxa_uart_id[i]) - return (int) hwid; - } - return MOXA_OTHER_UART; -} + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; -// above is modified by Victor Yu. 08-15-2002 + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} -static struct tty_operations mxser_ops = { - .open = mxser_open, - .close = mxser_close, - .write = mxser_write, - .put_char = mxser_put_char, - .flush_chars = mxser_flush_chars, - .write_room = mxser_write_room, - .chars_in_buffer = mxser_chars_in_buffer, - .flush_buffer = mxser_flush_buffer, - .ioctl = mxser_ioctl, - .throttle = mxser_throttle, - .unthrottle = mxser_unthrottle, - .set_termios = mxser_set_termios, - .stop = mxser_stop, - .start = mxser_start, - .hangup = mxser_hangup, - .break_ctl = mxser_rs_break, - .wait_until_sent = mxser_wait_until_sent, - .tiocmget = mxser_tiocmget, - .tiocmset = mxser_tiocmset, -}; +static void mxser_set_must_xon1_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; -/* - * The MOXA Smartio/Industio serial driver boot-time initialization code! - */ + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); -static int __init mxser_module_init(void) -{ - int ret; + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK0; - if (verbose) - printk(KERN_DEBUG "Loading module mxser ...\n"); - ret = mxser_init(); - if (verbose) - printk(KERN_DEBUG "Done.\n"); - return ret; + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_XON1_REGISTER); + outb(oldlcr, baseio + UART_LCR); } -static void __exit mxser_module_exit(void) +static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value) { - int i, err; + u8 oldlcr; + u8 efr; - if (verbose) - printk(KERN_DEBUG "Unloading module mxser ...\n"); + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - err = tty_unregister_driver(mxvar_sdriver); - if (!err) - put_tty_driver(mxvar_sdriver); - else - printk(KERN_ERR "Couldn't unregister MOXA Smartio/Industio family serial driver\n"); + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK0; + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} - for (i = 0; i < MXSER_BOARDS; i++) { - struct pci_dev *pdev; +static void mxser_set_must_fifo_value(struct mxser_port *info) +{ + u8 oldlcr; + u8 efr; - if (mxsercfg[i].board_type == -1) - continue; - else { - pdev = mxsercfg[i].pciInfo.pdev; - free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); - if (pdev != NULL) { //PCI - release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2)); - release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3)); - } else { - release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports); - release_region(mxsercfg[i].vector, 1); - } - } - } - if (verbose) - printk(KERN_DEBUG "Done.\n"); + oldlcr = inb(info->ioaddr + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR); + + efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK1; + outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER); + outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); + outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); + outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); + outb(oldlcr, info->ioaddr + UART_LCR); } -static void process_txrx_fifo(struct mxser_struct *info) +static void mxser_set_must_enum_value(unsigned long baseio, u8 value) { - int i; + u8 oldlcr; + u8 efr; - if ((info->type == PORT_16450) || (info->type == PORT_8250)) { - info->rx_trigger = 1; - info->rx_high_water = 1; - info->rx_low_water = 1; - info->xmit_fifo_size = 1; - } else { - for (i = 0; i < UART_INFO_NUM; i++) { - if (info->IsMoxaMustChipFlag == Gpci_uart_info[i].type) { - info->rx_trigger = Gpci_uart_info[i].rx_trigger; - info->rx_low_water = Gpci_uart_info[i].rx_low_water; - info->rx_high_water = Gpci_uart_info[i].rx_high_water; - info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; - break; - } - } - } + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK2; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_ENUM_REGISTER); + outb(oldlcr, baseio + UART_LCR); } -static int mxser_initbrd(int board, struct mxser_hwconf *hwconf) +static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId) { - struct mxser_struct *info; - int retval; - int i, n; - - n = board * MXSER_PORTS_PER_BOARD; - info = &mxvar_table[n]; - /*if (verbose) */ { - printk(KERN_DEBUG " ttyM%d - ttyM%d ", n, n + hwconf->ports - 1); - printk(" max. baud rate = %d bps.\n", hwconf->MaxCanSetBaudRate[0]); - } + u8 oldlcr; + u8 efr; - for (i = 0; i < hwconf->ports; i++, n++, info++) { - info->port = n; - info->base = hwconf->ioaddr[i]; - info->irq = hwconf->irq; - info->vector = hwconf->vector; - info->vectormask = hwconf->vector_mask; - info->opmode_ioaddr = hwconf->opmode_ioaddr[i]; // add by Victor Yu. 01-05-2004 - info->stop_rx = 0; - info->ldisc_stop_rx = 0; + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - info->IsMoxaMustChipFlag = hwconf->IsMoxaMustChipFlag; - //Enhance mode enabled here - if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { - ENABLE_MOXA_MUST_ENCHANCE_MODE(info->base); - } + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK2; - info->flags = ASYNC_SHARE_IRQ; - info->type = hwconf->uart_type; - info->baud_base = hwconf->baud_base[i]; + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + *pId = inb(baseio + MOXA_MUST_HWID_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} - info->MaxCanSetBaudRate = hwconf->MaxCanSetBaudRate[i]; +static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; - process_txrx_fifo(info); + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_MASK; - info->custom_divisor = hwconf->baud_base[i] * 16; - info->close_delay = 5 * HZ / 10; - info->closing_wait = 30 * HZ; - INIT_WORK(&info->tqueue, mxser_do_softint, info); - info->normal_termios = mxvar_sdriver->init_termios; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->delta_msr_wait); - memset(&info->mon_data, 0, sizeof(struct mxser_mon)); - info->err_shadow = 0; - spin_lock_init(&info->slock); - } - /* - * Allocate the IRQ if necessary - */ + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} +static void mxser_enable_must_tx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; - /* before set INT ISR, disable all int */ - for (i = 0; i < hwconf->ports; i++) { - outb(inb(hwconf->ioaddr[i] + UART_IER) & 0xf0, hwconf->ioaddr[i] + UART_IER); - } + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - n = board * MXSER_PORTS_PER_BOARD; - info = &mxvar_table[n]; + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_TX_MASK; + efr |= MOXA_MUST_EFR_SF_TX1; - retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info), "mxser", info); - if (retval) { - printk(KERN_ERR "Board %d: %s", board, mxser_brdname[hwconf->board_type - 1]); - printk(" Request irq fail,IRQ (%d) may be conflit with another device.\n", info->irq); - return retval; - } - return 0; + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); } - -static void mxser_getcfg(int board, struct mxser_hwconf *hwconf) +static void mxser_disable_must_tx_software_flow_control(unsigned long baseio) { - mxsercfg[board] = *hwconf; + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_TX_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); } -#ifdef CONFIG_PCI -static int mxser_get_PCI_conf(int busnum, int devnum, int board_type, struct mxser_hwconf *hwconf) +static void mxser_enable_must_rx_software_flow_control(unsigned long baseio) { - int i, j; -// unsigned int val; - unsigned int ioaddress; - struct pci_dev *pdev = hwconf->pciInfo.pdev; - - //io address - hwconf->board_type = board_type; - hwconf->ports = mxser_numports[board_type - 1]; - ioaddress = pci_resource_start(pdev, 2); - request_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2), "mxser(IO)"); + u8 oldlcr; + u8 efr; - for (i = 0; i < hwconf->ports; i++) { - hwconf->ioaddr[i] = ioaddress + 8 * i; - } + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - //vector - ioaddress = pci_resource_start(pdev, 3); - request_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3), "mxser(vector)"); - hwconf->vector = ioaddress; + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_RX_MASK; + efr |= MOXA_MUST_EFR_SF_RX1; - //irq - hwconf->irq = hwconf->pciInfo.pdev->irq; + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} - hwconf->IsMoxaMustChipFlag = CheckIsMoxaMust(hwconf->ioaddr[0]); - hwconf->uart_type = PORT_16550A; - hwconf->vector_mask = 0; +static void mxser_disable_must_rx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - for (i = 0; i < hwconf->ports; i++) { - for (j = 0; j < UART_INFO_NUM; j++) { - if (Gpci_uart_info[j].type == hwconf->IsMoxaMustChipFlag) { - hwconf->MaxCanSetBaudRate[i] = Gpci_uart_info[j].max_baud; + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_RX_MASK; - //exception....CP-102 - if (board_type == MXSER_BOARD_CP102) - hwconf->MaxCanSetBaudRate[i] = 921600; - break; - } - } - } + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} - if (hwconf->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID) { - for (i = 0; i < hwconf->ports; i++) { - if (i < 4) - hwconf->opmode_ioaddr[i] = ioaddress + 4; - else - hwconf->opmode_ioaddr[i] = ioaddress + 0x0c; - } - outb(0, ioaddress + 4); // default set to RS232 mode - outb(0, ioaddress + 0x0c); //default set to RS232 mode +#ifdef CONFIG_PCI +static int __devinit CheckIsMoxaMust(unsigned long io) +{ + u8 oldmcr, hwid; + int i; + + outb(0, io + UART_LCR); + mxser_disable_must_enchance_mode(io); + oldmcr = inb(io + UART_MCR); + outb(0, io + UART_MCR); + mxser_set_must_xon1_value(io, 0x11); + if ((hwid = inb(io + UART_MCR)) != 0) { + outb(oldmcr, io + UART_MCR); + return MOXA_OTHER_UART; } - for (i = 0; i < hwconf->ports; i++) { - hwconf->vector_mask |= (1 << i); - hwconf->baud_base[i] = 921600; + mxser_get_must_hardware_id(io, &hwid); + for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ + if (hwid == Gpci_uart_info[i].type) + return (int)hwid; } - return (0); + return MOXA_OTHER_UART; } #endif -static int mxser_init(void) +static void process_txrx_fifo(struct mxser_port *info) { - int i, m, retval, b, n; - struct pci_dev *pdev = NULL; - int index; - unsigned char busnum, devnum; - struct mxser_hwconf hwconf; + int i; - mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); - if (!mxvar_sdriver) - return -ENOMEM; - spin_lock_init(&gm_lock); + if ((info->type == PORT_16450) || (info->type == PORT_8250)) { + info->rx_trigger = 1; + info->rx_high_water = 1; + info->rx_low_water = 1; + info->xmit_fifo_size = 1; + } else + for (i = 0; i < UART_INFO_NUM; i++) + if (info->board->chip_flag == Gpci_uart_info[i].type) { + info->rx_trigger = Gpci_uart_info[i].rx_trigger; + info->rx_low_water = Gpci_uart_info[i].rx_low_water; + info->rx_high_water = Gpci_uart_info[i].rx_high_water; + info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; + break; + } +} - for (i = 0; i < MXSER_BOARDS; i++) { - mxsercfg[i].board_type = -1; - } +static unsigned char mxser_get_msr(int baseaddr, int mode, int port) +{ + static unsigned char mxser_msr[MXSER_PORTS + 1]; + unsigned char status = 0; - printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", MXSER_VERSION); + status = inb(baseaddr + UART_MSR); - /* Initialize the tty_driver structure */ - memset(mxvar_sdriver, 0, sizeof(struct tty_driver)); - mxvar_sdriver->magic = TTY_DRIVER_MAGIC; - mxvar_sdriver->name = "ttyM"; - mxvar_sdriver->major = ttymajor; - mxvar_sdriver->minor_start = 0; - mxvar_sdriver->num = MXSER_PORTS + 1; - mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; - mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; - mxvar_sdriver->init_termios = tty_std_termios; - mxvar_sdriver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(mxvar_sdriver, &mxser_ops); - mxvar_sdriver->ttys = mxvar_tty; - mxvar_sdriver->termios = mxvar_termios; - mxvar_sdriver->termios_locked = mxvar_termios_locked; + mxser_msr[port] &= 0x0F; + mxser_msr[port] |= status; + status = mxser_msr[port]; + if (mode) + mxser_msr[port] = 0; - mxvar_diagflag = 0; - memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct)); - memset(&mxvar_log, 0, sizeof(struct mxser_log)); + return status; +} - memset(&mxser_msr, 0, sizeof(unsigned char) * (MXSER_PORTS + 1)); - memset(&mon_data_ext, 0, sizeof(struct mxser_mon_ext)); - memset(&mxser_set_baud_method, 0, sizeof(int) * (MXSER_PORTS + 1)); - memset(&hwconf, 0, sizeof(struct mxser_hwconf)); +static int mxser_carrier_raised(struct tty_port *port) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; +} - m = 0; - /* Start finding ISA boards here */ - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - int cap; - if (!(cap = mxserBoardCAP[b])) - continue; +static void mxser_dtr_rts(struct tty_port *port, int on) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + unsigned long flags; - retval = mxser_get_ISA_conf(cap, &hwconf); + spin_lock_irqsave(&mp->slock, flags); + if (on) + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + else + outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), + mp->ioaddr + UART_MCR); + spin_unlock_irqrestore(&mp->slock, flags); +} - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type - 1], ioaddr[b]); +static int mxser_set_baud(struct tty_struct *tty, long newspd) +{ + struct mxser_port *info = tty->driver_data; + int quot = 0, baud; + unsigned char cval; - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt vector,board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address,board not configured\n"); + if (!info->ioaddr) + return -1; - continue; - } + if (newspd > info->max_baud) + return -1; - hwconf.pciInfo.busNum = 0; - hwconf.pciInfo.devNum = 0; - hwconf.pciInfo.pdev = NULL; + if (newspd == 134) { + quot = 2 * info->baud_base / 269; + tty_encode_baud_rate(tty, 134, 134); + } else if (newspd) { + quot = info->baud_base / newspd; + if (quot == 0) + quot = 1; + baud = info->baud_base/quot; + tty_encode_baud_rate(tty, baud, baud); + } else { + quot = 0; + } - mxser_getcfg(m, &hwconf); - //init mxsercfg first, or mxsercfg data is not correct on ISR. - //mxser_initbrd will hook ISR. - if (mxser_initbrd(m, &hwconf) < 0) - continue; + info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); + info->timeout += HZ / 50; /* Add .02 seconds of slop */ - - m++; + if (quot) { + info->MCR |= UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + } else { + info->MCR &= ~UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + return 0; } - /* Start finding ISA boards from module arg */ - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - int cap; - if (!(cap = ioaddr[b])) - continue; + cval = inb(info->ioaddr + UART_LCR); - retval = mxser_get_ISA_conf(cap, &hwconf); + outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type - 1], ioaddr[b]); + outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ + outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ + outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt vector,board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address,board not configured\n"); +#ifdef BOTHER + if (C_BAUD(tty) == BOTHER) { + quot = info->baud_base % newspd; + quot *= 8; + if (quot % newspd > newspd / 2) { + quot /= newspd; + quot++; + } else + quot /= newspd; - continue; - } + mxser_set_must_enum_value(info->ioaddr, quot); + } else +#endif + mxser_set_must_enum_value(info->ioaddr, 0); + + return 0; +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static int mxser_change_speed(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct mxser_port *info = tty->driver_data; + unsigned cflag, cval, fcr; + int ret = 0; + unsigned char status; - hwconf.pciInfo.busNum = 0; - hwconf.pciInfo.devNum = 0; - hwconf.pciInfo.pdev = NULL; + cflag = tty->termios->c_cflag; + if (!info->ioaddr) + return ret; - mxser_getcfg(m, &hwconf); - //init mxsercfg first, or mxsercfg data is not correct on ISR. - //mxser_initbrd will hook ISR. - if (mxser_initbrd(m, &hwconf) < 0) - continue; + if (mxser_set_baud_method[tty->index] == 0) + mxser_set_baud(tty, tty_get_baud_rate(tty)); - m++; + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + case CS8: + cval = 0x03; + break; + default: + cval = 0x00; + break; /* too keep GCC shut... */ } + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; - /* start finding PCI board here */ -#ifdef CONFIG_PCI - n = (sizeof(mxser_pcibrds) / sizeof(mxser_pcibrds[0])) - 1; - index = 0; - b = 0; - while (b < n) { - pdev = pci_find_device(mxser_pcibrds[b].vendor, mxser_pcibrds[b].device, pdev); - if (pdev == NULL) { - b++; - continue; - } - hwconf.pciInfo.busNum = busnum = pdev->bus->number; - hwconf.pciInfo.devNum = devnum = PCI_SLOT(pdev->devfn) << 3; - hwconf.pciInfo.pdev = pdev; - printk(KERN_INFO "Found MOXA %s board(BusNo=%d,DevNo=%d)\n", mxser_brdname[(int) (mxser_pcibrds[b].driver_data) - 1], busnum, devnum >> 3); - index++; - if (m >= MXSER_BOARDS) { - printk(KERN_ERR "Too many Smartio/Industio family boards find (maximum %d),board not configured\n", MXSER_BOARDS); + if ((info->type == PORT_8250) || (info->type == PORT_16450)) { + if (info->board->chip_flag) { + fcr = UART_FCR_ENABLE_FIFO; + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); + } else + fcr = 0; + } else { + fcr = UART_FCR_ENABLE_FIFO; + if (info->board->chip_flag) { + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); } else { - if (pci_enable_device(pdev)) { - printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n"); - continue; + switch (info->rx_trigger) { + case 1: + fcr |= UART_FCR_TRIGGER_1; + break; + case 4: + fcr |= UART_FCR_TRIGGER_4; + break; + case 8: + fcr |= UART_FCR_TRIGGER_8; + break; + default: + fcr |= UART_FCR_TRIGGER_14; + break; } - retval = mxser_get_PCI_conf(busnum, devnum, (int) mxser_pcibrds[b].driver_data, &hwconf); - if (retval < 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt number,board not configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt vector,board not configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address,board not configured\n"); - continue; + } + } + + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + info->MCR &= ~UART_MCR_AFE; + if (cflag & CRTSCTS) { + info->port.flags |= ASYNC_CTS_FLOW; + info->IER |= UART_IER_MSI; + if ((info->type == PORT_16550A) || (info->board->chip_flag)) { + info->MCR |= UART_MCR_AFE; + } else { + status = inb(info->ioaddr + UART_MSR); + if (tty->hw_stopped) { + if (status & UART_MSR_CTS) { + tty->hw_stopped = 0; + if (info->type != PORT_16550A && + !info->board->chip_flag) { + outb(info->IER & ~UART_IER_THRI, + info->ioaddr + + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + tty_wakeup(tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + tty->hw_stopped = 1; + if ((info->type != PORT_16550A) && + (!info->board->chip_flag)) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + } } - mxser_getcfg(m, &hwconf); - //init mxsercfg first, or mxsercfg data is not correct on ISR. - //mxser_initbrd will hook ISR. - if (mxser_initbrd(m, &hwconf) < 0) - continue; - m++; } + } else { + info->port.flags &= ~ASYNC_CTS_FLOW; } -#endif + outb(info->MCR, info->ioaddr + UART_MCR); + if (cflag & CLOCAL) { + info->port.flags &= ~ASYNC_CHECK_CD; + } else { + info->port.flags |= ASYNC_CHECK_CD; + info->IER |= UART_IER_MSI; + } + outb(info->IER, info->ioaddr + UART_IER); - retval = tty_register_driver(mxvar_sdriver); - if (retval) { - printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family driver !\n"); - put_tty_driver(mxvar_sdriver); + /* + * Set up parity check flag + */ + info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (I_INPCK(tty)) + info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (I_BRKINT(tty) || I_PARMRK(tty)) + info->read_status_mask |= UART_LSR_BI; - for (i = 0; i < MXSER_BOARDS; i++) { - if (mxsercfg[i].board_type == -1) - continue; - else { - free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); - //todo: release io, vector - } + info->ignore_status_mask = 0; + + if (I_IGNBRK(tty)) { + info->ignore_status_mask |= UART_LSR_BI; + info->read_status_mask |= UART_LSR_BI; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(tty)) { + info->ignore_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + info->read_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + } + } + if (info->board->chip_flag) { + mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); + mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); + if (I_IXON(tty)) { + mxser_enable_must_rx_software_flow_control( + info->ioaddr); + } else { + mxser_disable_must_rx_software_flow_control( + info->ioaddr); + } + if (I_IXOFF(tty)) { + mxser_enable_must_tx_software_flow_control( + info->ioaddr); + } else { + mxser_disable_must_tx_software_flow_control( + info->ioaddr); } - return retval; } - return 0; + + outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ + outb(cval, info->ioaddr + UART_LCR); + + return ret; } -static void mxser_do_softint(void *private_) +static void mxser_check_modem_status(struct tty_struct *tty, + struct mxser_port *port, int status) { - struct mxser_struct *info = (struct mxser_struct *) private_; - struct tty_struct *tty; + /* update input line counters */ + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) + port->icount.dcd++; + if (status & UART_MSR_DCTS) + port->icount.cts++; + port->mon_data.modem_status = status; + wake_up_interruptible(&port->port.delta_msr_wait); - tty = info->tty; + if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { + if (status & UART_MSR_DCD) + wake_up_interruptible(&port->port.open_wait); + } - if (tty) { - if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event)) - tty_wakeup(tty); - if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event)) - tty_hangup(tty); + if (port->port.flags & ASYNC_CTS_FLOW) { + if (tty->hw_stopped) { + if (status & UART_MSR_CTS) { + tty->hw_stopped = 0; + + if ((port->type != PORT_16550A) && + (!port->board->chip_flag)) { + outb(port->IER & ~UART_IER_THRI, + port->ioaddr + UART_IER); + port->IER |= UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + tty_wakeup(tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + tty->hw_stopped = 1; + if (port->type != PORT_16550A && + !port->board->chip_flag) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + } + } } } -static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxser_struct *info) +static int mxser_activate(struct tty_port *port, struct tty_struct *tty) { - unsigned char status = 0; + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long page; + unsigned long flags; - status = inb(baseaddr + UART_MSR); + page = __get_free_page(GFP_KERNEL); + if (!page) + return -ENOMEM; - mxser_msr[port] &= 0x0F; - mxser_msr[port] |= status; - status = mxser_msr[port]; - if (mode) - mxser_msr[port] = 0; + spin_lock_irqsave(&info->slock, flags); - return status; -} + if (!info->ioaddr || !info->type) { + set_bit(TTY_IO_ERROR, &tty->flags); + free_page(page); + spin_unlock_irqrestore(&info->slock, flags); + return 0; + } + info->port.xmit_buf = (unsigned char *) page; -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int mxser_open(struct tty_struct *tty, struct file *filp) -{ - struct mxser_struct *info; - int retval, line; + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in mxser_change_speed()) + */ + if (info->board->chip_flag) + outb((UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); + else + outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); - /* initialize driver_data in case something fails */ - tty->driver_data = NULL; + /* + * At this point there's no way the LSR could still be 0xFF; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (inb(info->ioaddr + UART_LSR) == 0xff) { + spin_unlock_irqrestore(&info->slock, flags); + if (capable(CAP_SYS_ADMIN)) { + set_bit(TTY_IO_ERROR, &tty->flags); + return 0; + } else + return -ENODEV; + } - line = tty->index; - if (line == MXSER_PORTS) - return 0; - if (line < 0 || line > MXSER_PORTS) - return -ENODEV; - info = mxvar_table + line; - if (!info->base) - return (-ENODEV); + /* + * Clear the interrupt registers. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); - tty->driver_data = info; - info->tty = tty; /* - * Start up serial port + * Now, initialize the UART */ - retval = mxser_startup(info); - if (retval) - return (retval); + outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ + info->MCR = UART_MCR_DTR | UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); - retval = mxser_block_til_ready(tty, filp, info); - if (retval) - return (retval); + /* + * Finally, enable interrupts + */ + info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - info->count++; + if (info->board->chip_flag) + info->IER |= MOXA_MUST_IER_EGDAI; + outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ - if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { - if (tty->driver->subtype == SERIAL_TYPE_NORMAL) - *tty->termios = info->normal_termios; - else - *tty->termios = info->callout_termios; - mxser_change_speed(info, NULL); - } + /* + * And clear the interrupt registers again for luck. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); - info->session = current->signal->session; - info->pgrp = process_group(current); - clear_bit(TTY_DONT_FLIP, &tty->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - //status = mxser_get_msr(info->base, 0, info->port); - //mxser_check_modem_status(info, status); + /* + * and set the speed of the serial port + */ + mxser_change_speed(tty, NULL); + spin_unlock_irqrestore(&info->slock, flags); -/* unmark here for very high baud rate (ex. 921600 bps) used -*/ - tty->low_latency = 1; return 0; } /* - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. + * This routine will shutdown a serial port */ -static void mxser_close(struct tty_struct *tty, struct file *filp) +static void mxser_shutdown_port(struct tty_port *port) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - - unsigned long timeout; + struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long flags; - struct tty_ldisc *ld; - - if (tty->index == MXSER_PORTS) - return; - if (!info) - return; spin_lock_irqsave(&info->slock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "mxser_close: bad serial port count; tty->count is 1, " "info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk(KERN_ERR "mxser_close: bad serial port count for ttys%d: %d\n", info->port, info->count); - info->count = 0; - } - if (info->count) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - info->flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); - /* - * Save the termios structure, since this port may have - * separate termios for callout and dialin. - */ - if (info->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); + wake_up_interruptible(&info->port.delta_msr_wait); + /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. + * Free the xmit buffer, if necessary */ - info->IER &= ~UART_IER_RLSI; - if (info->IsMoxaMustChipFlag) - info->IER &= ~MOXA_MUST_RECV_ISR; -/* by William - info->read_status_mask &= ~UART_LSR_DR; -*/ - if (info->flags & ASYNC_INITIALIZED) { - outb(info->IER, info->base + UART_IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(inb(info->base + UART_LSR) & UART_LSR_TEMT)) { - schedule_timeout_interruptible(5); - if (time_after(jiffies, timeout)) - break; - } + if (info->port.xmit_buf) { + free_page((unsigned long) info->port.xmit_buf); + info->port.xmit_buf = NULL; } - mxser_shutdown(info); - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - - ld = tty_ldisc_ref(tty); - if (ld) { - if(ld->flush_buffer) - ld->flush_buffer(tty); - tty_ldisc_deref(ld); - } - - tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) - schedule_timeout_interruptible(info->close_delay); - wake_up_interruptible(&info->open_wait); + info->IER = 0; + outb(0x00, info->ioaddr + UART_IER); + + /* clear Rx/Tx FIFO's */ + if (info->board->chip_flag) + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE, + info->ioaddr + UART_FCR); + else + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + info->ioaddr + UART_FCR); + + /* read data port to reset things */ + (void) inb(info->ioaddr + UART_RX); + + + if (info->board->chip_flag) + SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); + + spin_unlock_irqrestore(&info->slock, flags); +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int mxser_open(struct tty_struct *tty, struct file *filp) +{ + struct mxser_port *info; + int line; + + line = tty->index; + if (line == MXSER_PORTS) + return 0; + if (line < 0 || line > MXSER_PORTS) + return -ENODEV; + info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; + if (!info->ioaddr) + return -ENODEV; + + tty->driver_data = info; + return tty_port_open(&info->port, tty, filp); +} + +static void mxser_flush_buffer(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + char fcr; + unsigned long flags; + + + spin_lock_irqsave(&info->slock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + fcr = inb(info->ioaddr + UART_FCR); + outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); + outb(fcr, info->ioaddr + UART_FCR); + + spin_unlock_irqrestore(&info->slock, flags); + + tty_wakeup(tty); +} + + +static void mxser_close_port(struct tty_port *port) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long timeout; + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->IER &= ~UART_IER_RLSI; + if (info->board->chip_flag) + info->IER &= ~MOXA_MUST_RECV_ISR; + + outb(info->IER, info->ioaddr + UART_IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { + schedule_timeout_interruptible(5); + if (time_after(jiffies, timeout)) + break; } +} - info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); +/* + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + */ +static void mxser_close(struct tty_struct *tty, struct file *filp) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + if (tty->index == MXSER_PORTS || info == NULL) + return; + if (tty_port_close_start(port, tty, filp) == 0) + return; + mutex_lock(&port->mutex); + mxser_close_port(port); + mxser_flush_buffer(tty); + mxser_shutdown_port(port); + clear_bit(ASYNCB_INITIALIZED, &port->flags); + mutex_unlock(&port->mutex); + /* Right now the tty_port set is done outside of the close_end helper + as we don't yet have everyone using refcounts */ + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) { int c, total = 0; - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; - if (!tty || !info->xmit_buf) - return (0); + if (!info->port.xmit_buf) + return 0; while (1) { - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); if (c <= 0) break; - memcpy(info->xmit_buf + info->xmit_head, buf, c); + memcpy(info->port.xmit_buf + info->xmit_head, buf, c); spin_lock_irqsave(&info->slock, flags); - info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); + info->xmit_head = (info->xmit_head + c) & + (SERIAL_XMIT_SIZE - 1); info->xmit_cnt += c; spin_unlock_irqrestore(&info->slock, flags); buf += c; count -= c; total += c; - } - if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) { - if (!tty->hw_stopped || (info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) { + if (info->xmit_cnt && !tty->stopped) { + if (!tty->hw_stopped || + (info->type == PORT_16550A) || + (info->board->chip_flag)) { spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + + UART_IER); info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); spin_unlock_irqrestore(&info->slock, flags); } } return total; } -static void mxser_put_char(struct tty_struct *tty, unsigned char ch) +static int mxser_put_char(struct tty_struct *tty, unsigned char ch) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; - if (!tty || !info->xmit_buf) - return; + if (!info->port.xmit_buf) + return 0; if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) - return; + return 0; spin_lock_irqsave(&info->slock, flags); - info->xmit_buf[info->xmit_head++] = ch; + info->port.xmit_buf[info->xmit_head++] = ch; info->xmit_head &= SERIAL_XMIT_SIZE - 1; info->xmit_cnt++; spin_unlock_irqrestore(&info->slock, flags); - if (!tty->stopped && !(info->IER & UART_IER_THRI)) { - if (!tty->hw_stopped || (info->type == PORT_16550A) || info->IsMoxaMustChipFlag) { + if (!tty->stopped) { + if (!tty->hw_stopped || + (info->type == PORT_16550A) || + info->board->chip_flag) { spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); spin_unlock_irqrestore(&info->slock, flags); } } + return 1; } static void mxser_flush_chars(struct tty_struct *tty) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; - if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf || (tty->hw_stopped && (info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag))) + if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf || + (tty->hw_stopped && info->type != PORT_16550A && + !info->board->chip_flag)) return; spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); spin_unlock_irqrestore(&info->slock, flags); } static int mxser_write_room(struct tty_struct *tty) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; int ret; ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return (ret); + return ret < 0 ? 0 : ret; } static int mxser_chars_in_buffer(struct tty_struct *tty) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; return info->xmit_cnt; } -static void mxser_flush_buffer(struct tty_struct *tty) +/* + * ------------------------------------------------------------ + * friends of mxser_ioctl() + * ------------------------------------------------------------ + */ +static int mxser_get_serial_info(struct tty_struct *tty, + struct serial_struct __user *retinfo) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - char fcr; - unsigned long flags; - - - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* below added by shinhay */ - fcr = inb(info->base + UART_FCR); - outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR); - outb(fcr, info->base + UART_FCR); - - spin_unlock_irqrestore(&info->slock, flags); - /* above added by shinhay */ - - wake_up_interruptible(&tty->write_wait); - if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) - (tty->ldisc.write_wakeup) (tty); + struct mxser_port *info = tty->driver_data; + struct serial_struct tmp = { + .type = info->type, + .line = tty->index, + .port = info->ioaddr, + .irq = info->board->irq, + .flags = info->port.flags, + .baud_base = info->baud_base, + .close_delay = info->port.close_delay, + .closing_wait = info->port.closing_wait, + .custom_divisor = info->custom_divisor, + .hub6 = 0 + }; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; } -static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +static int mxser_set_serial_info(struct tty_struct *tty, + struct serial_struct __user *new_info) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - int retval; - struct async_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; - unsigned long templ; - unsigned long flags; - void __user *argp = (void __user *)arg; - - if (tty->index == MXSER_PORTS) - return (mxser_ioctl_special(cmd, argp)); - - // following add by Victor Yu. 01-05-2004 - if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { - int opmode, p; - static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; - int shiftbit; - unsigned char val, mask; + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + struct serial_struct new_serial; + speed_t baud; + unsigned long sl_flags; + unsigned int flags; + int retval = 0; - p = info->port % 4; - if (cmd == MOXA_SET_OP_MODE) { - if (get_user(opmode, (int __user *) argp)) - return -EFAULT; - if (opmode != RS232_MODE && opmode != RS485_2WIRE_MODE && opmode != RS422_MODE && opmode != RS485_4WIRE_MODE) - return -EFAULT; - mask = ModeMask[p]; - shiftbit = p * 2; - val = inb(info->opmode_ioaddr); - val &= mask; - val |= (opmode << shiftbit); - outb(val, info->opmode_ioaddr); - } else { - shiftbit = p * 2; - opmode = inb(info->opmode_ioaddr) >> shiftbit; - opmode &= OP_MODE_MASK; - if (copy_to_user(argp, &opmode, sizeof(int))) - return -EFAULT; - } - return 0; - } - // above add by Victor Yu. 01-05-2004 + if (!new_info || !info->ioaddr) + return -ENODEV; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; - if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return (-EIO); - } - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return (retval); - tty_wait_until_sent(tty, 0); - if (!arg) - mxser_send_break(info, HZ / 4); /* 1/4 second */ - return (0); - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return (retval); - tty_wait_until_sent(tty, 0); - mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4); - return (0); - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp); - case TIOCSSOFTCAR: - if (get_user(templ, (unsigned long __user *) argp)) - return -EFAULT; - arg = templ; - tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); - return (0); - case TIOCGSERIAL: - return mxser_get_serial_info(info, argp); - case TIOCSSERIAL: - return mxser_set_serial_info(info, argp); - case TIOCSERGETLSR: /* Get line status register */ - return mxser_get_lsr_info(info, argp); - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT:{ - DECLARE_WAITQUEUE(wait, current); - int ret; - spin_lock_irqsave(&info->slock, flags); - cprev = info->icount; /* note the counters on entry */ - spin_unlock_irqrestore(&info->slock, flags); + if (new_serial.irq != info->board->irq || + new_serial.port != info->ioaddr) + return -EINVAL; - add_wait_queue(&info->delta_msr_wait, &wait); - while (1) { - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->slock, flags); + flags = port->flags & ASYNC_SPD_MASK; - set_current_state(TASK_INTERRUPTIBLE); - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - ret = 0; - break; - } - /* see if a signal did it */ - if (signal_pending(current)) { - ret = -ERESTARTSYS; - break; - } - cprev = cnow; - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->delta_msr_wait, &wait); - break; - } - /* NOTREACHED */ + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.close_delay != info->port.close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + } else { /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->slock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->slock, flags); - p_cuser = argp; - /* modified by casper 1/11/2000 */ - if (put_user(cnow.frame, &p_cuser->frame)) - return -EFAULT; - if (put_user(cnow.brk, &p_cuser->brk)) - return -EFAULT; - if (put_user(cnow.overrun, &p_cuser->overrun)) - return -EFAULT; - if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - return -EFAULT; - if (put_user(cnow.parity, &p_cuser->parity)) - return -EFAULT; - if (put_user(cnow.rx, &p_cuser->rx)) - return -EFAULT; - if (put_user(cnow.tx, &p_cuser->tx)) - return -EFAULT; - put_user(cnow.cts, &p_cuser->cts); - put_user(cnow.dsr, &p_cuser->dsr); - put_user(cnow.rng, &p_cuser->rng); - put_user(cnow.dcd, &p_cuser->dcd); - -/* */ - return 0; - case MOXA_HighSpeedOn: - return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *) argp); - - case MOXA_SDS_RSTICOUNTER:{ - info->mon_data.rxcnt = 0; - info->mon_data.txcnt = 0; - return 0; + port->flags = ((port->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + port->close_delay = new_serial.close_delay * HZ / 100; + port->closing_wait = new_serial.closing_wait * HZ / 100; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + (new_serial.baud_base != info->baud_base || + new_serial.custom_divisor != + info->custom_divisor)) { + if (new_serial.custom_divisor == 0) + return -EINVAL; + baud = new_serial.baud_base / new_serial.custom_divisor; + tty_encode_baud_rate(tty, baud, baud); } -// (above) added by James. - case MOXA_ASPP_SETBAUD:{ - long baud; - if (get_user(baud, (long __user *) argp)) - return -EFAULT; - mxser_set_baud(info, baud); - return 0; - } - case MOXA_ASPP_GETBAUD: - if (copy_to_user(argp, &info->realbaud, sizeof(long))) - return -EFAULT; - - return 0; - - case MOXA_ASPP_OQUEUE:{ - int len, lsr; + } - len = mxser_chars_in_buffer(tty); + info->type = new_serial.type; - lsr = inb(info->base + UART_LSR) & UART_LSR_TEMT; + process_txrx_fifo(info); - len += (lsr ? 0 : 1); + if (test_bit(ASYNCB_INITIALIZED, &port->flags)) { + if (flags != (port->flags & ASYNC_SPD_MASK)) { + spin_lock_irqsave(&info->slock, sl_flags); + mxser_change_speed(tty, NULL); + spin_unlock_irqrestore(&info->slock, sl_flags); + } + } else { + retval = mxser_activate(port, tty); + if (retval == 0) + set_bit(ASYNCB_INITIALIZED, &port->flags); + } + return retval; +} - if (copy_to_user(argp, &len, sizeof(int))) - return -EFAULT; +/* + * mxser_get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int mxser_get_lsr_info(struct mxser_port *info, + unsigned int __user *value) +{ + unsigned char status; + unsigned int result; + unsigned long flags; - return 0; - } - case MOXA_ASPP_MON:{ - int mcr, status; -// info->mon_data.ser_param = tty->termios->c_cflag; + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_LSR); + spin_unlock_irqrestore(&info->slock, flags); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result, value); +} - status = mxser_get_msr(info->base, 1, info->port, info); - mxser_check_modem_status(info, status); +static int mxser_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct mxser_port *info = tty->driver_data; + unsigned char control, status; + unsigned long flags; - mcr = inb(info->base + UART_MCR); - if (mcr & MOXA_MUST_MCR_XON_FLAG) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; - if (mcr & MOXA_MUST_MCR_TX_XON) - info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; - else - info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; - if (info->tty->hw_stopped) - info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; - else - info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; + control = info->MCR; + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_MSR); + if (status & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, info, status); + spin_unlock_irqrestore(&info->slock, flags); + return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | + ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | + ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | + ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | + ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | + ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +} - if (copy_to_user(argp, &info->mon_data, sizeof(struct mxser_mon))) - return -EFAULT; +static int mxser_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; - return 0; - } + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; - case MOXA_ASPP_LSTATUS:{ - if (copy_to_user(argp, &info->err_shadow, sizeof(unsigned char))) - return -EFAULT; + spin_lock_irqsave(&info->slock, flags); - info->err_shadow = 0; - return 0; + if (set & TIOCM_RTS) + info->MCR |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->MCR |= UART_MCR_DTR; - } - case MOXA_SET_BAUD_METHOD:{ - int method; - if (get_user(method, (int __user *) argp)) - return -EFAULT; - mxser_set_baud_method[info->port] = method; - if (copy_to_user(argp, &method, sizeof(int))) - return -EFAULT; + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; - return 0; - } - default: - return -ENOIOCTLCMD; - } + outb(info->MCR, info->ioaddr + UART_MCR); + spin_unlock_irqrestore(&info->slock, flags); return 0; } -#ifndef CMSPAR -#define CMSPAR 010000000000 -#endif - -static int mxser_ioctl_special(unsigned int cmd, void __user *argp) +static int __init mxser_program_mode(int port) { - int i, result, status; + int id, i, j, n; + + outb(0, port); + outb(0, port); + outb(0, port); + (void)inb(port); + (void)inb(port); + outb(0, port); + (void)inb(port); + + id = inb(port + 1) & 0x1F; + if ((id != C168_ASIC_ID) && + (id != C104_ASIC_ID) && + (id != C102_ASIC_ID) && + (id != CI132_ASIC_ID) && + (id != CI134_ASIC_ID) && + (id != CI104J_ASIC_ID)) + return -1; + for (i = 0, j = 0; i < 4; i++) { + n = inb(port + 2); + if (n == 'M') { + j = 1; + } else if ((j == 1) && (n == 1)) { + j = 2; + break; + } else + j = 0; + } + if (j != 2) + id = -2; + return id; +} + +static void __init mxser_normal_mode(int port) +{ + int i, n; + + outb(0xA5, port + 1); + outb(0x80, port + 3); + outb(12, port + 0); /* 9600 bps */ + outb(0, port + 1); + outb(0x03, port + 3); /* 8 data bits */ + outb(0x13, port + 4); /* loop back mode */ + for (i = 0; i < 16; i++) { + n = inb(port + 5); + if ((n & 0x61) == 0x60) + break; + if ((n & 1) == 1) + (void)inb(port); + } + outb(0x00, port + 4); +} + +#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ +#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ +#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ +#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ +#define EN_CCMD 0x000 /* Chip's command register */ +#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ +#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ +#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ +#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ +#define EN0_DCFG 0x00E /* Data configuration reg WR */ +#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ +#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ +#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ +static int __init mxser_read_register(int port, unsigned short *regs) +{ + int i, k, value, id; + unsigned int j; + + id = mxser_program_mode(port); + if (id < 0) + return id; + for (i = 0; i < 14; i++) { + k = (i & 0x3F) | 0x180; + for (j = 0x100; j > 0; j >>= 1) { + outb(CHIP_CS, port); + if (k & j) { + outb(CHIP_CS | CHIP_DO, port); + outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ + } else { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ + } + } + (void)inb(port); + value = 0; + for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); + if (inb(port) & CHIP_DI) + value |= j; + } + regs[i] = value; + outb(0, port); + } + mxser_normal_mode(port); + return id; +} + +static int mxser_ioctl_special(unsigned int cmd, void __user *argp) +{ + struct mxser_port *ip; + struct tty_port *port; + struct tty_struct *tty; + int result, status; + unsigned int i, j; + int ret = 0; switch (cmd) { - case MOXA_GET_CONF: - if (copy_to_user(argp, mxsercfg, sizeof(struct mxser_hwconf) * 4)) - return -EFAULT; - return 0; case MOXA_GET_MAJOR: - if (copy_to_user(argp, &ttymajor, sizeof(int))) - return -EFAULT; - return 0; - - case MOXA_GET_CUMAJOR: - if (copy_to_user(argp, &calloutmajor, sizeof(int))) - return -EFAULT; - return 0; + if (printk_ratelimit()) + printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl " + "%x (GET_MAJOR), fix your userspace\n", + current->comm, cmd); + return put_user(ttymajor, (int __user *)argp); case MOXA_CHKPORTENABLE: result = 0; - for (i = 0; i < MXSER_PORTS; i++) { - if (mxvar_table[i].base) - result |= (1 << i); - } - return put_user(result, (unsigned long __user *) argp); + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) + if (mxser_boards[i].ports[j].ioaddr) + result |= (1 << i); + return put_user(result, (unsigned long __user *)argp); case MOXA_GETDATACOUNT: + /* The receive side is locked by port->slock but it isn't + clear that an exact snapshot is worth copying here */ if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) - return -EFAULT; - return (0); - case MOXA_GETMSTATUS: - for (i = 0; i < MXSER_PORTS; i++) { - GMStatus[i].ri = 0; - if (!mxvar_table[i].base) { - GMStatus[i].dcd = 0; - GMStatus[i].dsr = 0; - GMStatus[i].cts = 0; - continue; + ret = -EFAULT; + return ret; + case MOXA_GETMSTATUS: { + struct mxser_mstatus ms, __user *msu = argp; + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + memset(&ms, 0, sizeof(ms)); + + mutex_lock(&port->mutex); + if (!ip->ioaddr) + goto copy; + + tty = tty_port_tty_get(port); + + if (!tty || !tty->termios) + ms.cflag = ip->normal_termios.c_cflag; + else + ms.cflag = tty->termios->c_cflag; + tty_kref_put(tty); + spin_lock_irq(&ip->slock); + status = inb(ip->ioaddr + UART_MSR); + spin_unlock_irq(&ip->slock); + if (status & UART_MSR_DCD) + ms.dcd = 1; + if (status & UART_MSR_DSR) + ms.dsr = 1; + if (status & UART_MSR_CTS) + ms.cts = 1; + copy: + mutex_unlock(&port->mutex); + if (copy_to_user(msu, &ms, sizeof(ms))) + return -EFAULT; + msu++; } - - if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) - GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag; - else - GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag; - - status = inb(mxvar_table[i].base + UART_MSR); - if (status & 0x80 /*UART_MSR_DCD */ ) - GMStatus[i].dcd = 1; - else - GMStatus[i].dcd = 0; - - if (status & 0x20 /*UART_MSR_DSR */ ) - GMStatus[i].dsr = 1; - else - GMStatus[i].dsr = 0; - - - if (status & 0x10 /*UART_MSR_CTS */ ) - GMStatus[i].cts = 1; - else - GMStatus[i].cts = 0; - } - if (copy_to_user(argp, GMStatus, sizeof(struct mxser_mstatus) * MXSER_PORTS)) - return -EFAULT; return 0; - case MOXA_ASPP_MON_EXT:{ - int status; - int opmode, p; - int shiftbit; - unsigned cflag, iflag; + } + case MOXA_ASPP_MON_EXT: { + struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */ + unsigned int cflag, iflag, p; + u8 opmode; - for (i = 0; i < MXSER_PORTS; i++) { + me = kzalloc(sizeof(*me), GFP_KERNEL); + if (!me) + return -ENOMEM; - if (!mxvar_table[i].base) + for (i = 0, p = 0; i < MXSER_BOARDS; i++) { + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { + if (p >= ARRAY_SIZE(me->rx_cnt)) { + i = MXSER_BOARDS; + break; + } + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + + mutex_lock(&port->mutex); + if (!ip->ioaddr) { + mutex_unlock(&port->mutex); continue; + } + + spin_lock_irq(&ip->slock); + status = mxser_get_msr(ip->ioaddr, 0, p); - status = mxser_get_msr(mxvar_table[i].base, 0, i, &(mxvar_table[i])); -// mxser_check_modem_status(&mxvar_table[i], status); if (status & UART_MSR_TERI) - mxvar_table[i].icount.rng++; + ip->icount.rng++; if (status & UART_MSR_DDSR) - mxvar_table[i].icount.dsr++; + ip->icount.dsr++; if (status & UART_MSR_DDCD) - mxvar_table[i].icount.dcd++; + ip->icount.dcd++; if (status & UART_MSR_DCTS) - mxvar_table[i].icount.cts++; - - mxvar_table[i].mon_data.modem_status = status; - mon_data_ext.rx_cnt[i] = mxvar_table[i].mon_data.rxcnt; - mon_data_ext.tx_cnt[i] = mxvar_table[i].mon_data.txcnt; - mon_data_ext.up_rxcnt[i] = mxvar_table[i].mon_data.up_rxcnt; - mon_data_ext.up_txcnt[i] = mxvar_table[i].mon_data.up_txcnt; - mon_data_ext.modem_status[i] = mxvar_table[i].mon_data.modem_status; - mon_data_ext.baudrate[i] = mxvar_table[i].realbaud; - - if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) { - cflag = mxvar_table[i].normal_termios.c_cflag; - iflag = mxvar_table[i].normal_termios.c_iflag; + ip->icount.cts++; + + ip->mon_data.modem_status = status; + me->rx_cnt[p] = ip->mon_data.rxcnt; + me->tx_cnt[p] = ip->mon_data.txcnt; + me->up_rxcnt[p] = ip->mon_data.up_rxcnt; + me->up_txcnt[p] = ip->mon_data.up_txcnt; + me->modem_status[p] = + ip->mon_data.modem_status; + spin_unlock_irq(&ip->slock); + + tty = tty_port_tty_get(&ip->port); + + if (!tty || !tty->termios) { + cflag = ip->normal_termios.c_cflag; + iflag = ip->normal_termios.c_iflag; + me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); } else { - cflag = mxvar_table[i].tty->termios->c_cflag; - iflag = mxvar_table[i].tty->termios->c_iflag; + cflag = tty->termios->c_cflag; + iflag = tty->termios->c_iflag; + me->baudrate[p] = tty_get_baud_rate(tty); } + tty_kref_put(tty); - mon_data_ext.databits[i] = cflag & CSIZE; - - mon_data_ext.stopbits[i] = cflag & CSTOPB; - - mon_data_ext.parity[i] = cflag & (PARENB | PARODD | CMSPAR); - - mon_data_ext.flowctrl[i] = 0x00; + me->databits[p] = cflag & CSIZE; + me->stopbits[p] = cflag & CSTOPB; + me->parity[p] = cflag & (PARENB | PARODD | + CMSPAR); if (cflag & CRTSCTS) - mon_data_ext.flowctrl[i] |= 0x03; + me->flowctrl[p] |= 0x03; if (iflag & (IXON | IXOFF)) - mon_data_ext.flowctrl[i] |= 0x0C; + me->flowctrl[p] |= 0x0C; - if (mxvar_table[i].type == PORT_16550A) - mon_data_ext.fifo[i] = 1; - else - mon_data_ext.fifo[i] = 0; + if (ip->type == PORT_16550A) + me->fifo[p] = 1; - p = i % 4; - shiftbit = p * 2; - opmode = inb(mxvar_table[i].opmode_ioaddr) >> shiftbit; + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); opmode &= OP_MODE_MASK; + me->iftype[p] = opmode; + mutex_unlock(&port->mutex); + } + } + if (copy_to_user(argp, me, sizeof(*me))) + ret = -EFAULT; + kfree(me); + return ret; + } + default: + return -ENOIOCTLCMD; + } + return 0; +} - mon_data_ext.iftype[i] = opmode; +static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, + struct async_icount *cprev) +{ + struct async_icount cnow; + unsigned long flags; + int ret; - } - if (copy_to_user(argp, &mon_data_ext, sizeof(struct mxser_mon_ext))) - return -EFAULT; + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* atomic copy */ + spin_unlock_irqrestore(&info->slock, flags); - return 0; + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +static int mxser_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + struct async_icount cnow; + unsigned long flags; + void __user *argp = (void __user *)arg; + int retval; + + if (tty->index == MXSER_PORTS) + return mxser_ioctl_special(cmd, argp); + + if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { + int p; + unsigned long opmode; + static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; + int shiftbit; + unsigned char val, mask; + p = tty->index % 4; + if (cmd == MOXA_SET_OP_MODE) { + if (get_user(opmode, (int __user *) argp)) + return -EFAULT; + if (opmode != RS232_MODE && + opmode != RS485_2WIRE_MODE && + opmode != RS422_MODE && + opmode != RS485_4WIRE_MODE) + return -EFAULT; + mask = ModeMask[p]; + shiftbit = p * 2; + spin_lock_irq(&info->slock); + val = inb(info->opmode_ioaddr); + val &= mask; + val |= (opmode << shiftbit); + outb(val, info->opmode_ioaddr); + spin_unlock_irq(&info->slock); + } else { + shiftbit = p * 2; + spin_lock_irq(&info->slock); + opmode = inb(info->opmode_ioaddr) >> shiftbit; + spin_unlock_irq(&info->slock); + opmode &= OP_MODE_MASK; + if (put_user(opmode, (int __user *)argp)) + return -EFAULT; } + return 0; + } + + if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT && + test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + switch (cmd) { + case TIOCGSERIAL: + mutex_lock(&port->mutex); + retval = mxser_get_serial_info(tty, argp); + mutex_unlock(&port->mutex); + return retval; + case TIOCSSERIAL: + mutex_lock(&port->mutex); + retval = mxser_set_serial_info(tty, argp); + mutex_unlock(&port->mutex); + return retval; + case TIOCSERGETLSR: /* Get line status register */ + return mxser_get_lsr_info(info, argp); + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* note the counters on entry */ + spin_unlock_irqrestore(&info->slock, flags); + + return wait_event_interruptible(info->port.delta_msr_wait, + mxser_cflags_changed(info, arg, &cnow)); + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + case TIOCGICOUNT: { + struct serial_icounter_struct icnt = { 0 }; + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->slock, flags); + + icnt.frame = cnow.frame; + icnt.brk = cnow.brk; + icnt.overrun = cnow.overrun; + icnt.buf_overrun = cnow.buf_overrun; + icnt.parity = cnow.parity; + icnt.rx = cnow.rx; + icnt.tx = cnow.tx; + icnt.cts = cnow.cts; + icnt.dsr = cnow.dsr; + icnt.rng = cnow.rng; + icnt.dcd = cnow.dcd; + + return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0; + } + case MOXA_HighSpeedOn: + return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); + case MOXA_SDS_RSTICOUNTER: + spin_lock_irq(&info->slock); + info->mon_data.rxcnt = 0; + info->mon_data.txcnt = 0; + spin_unlock_irq(&info->slock); + return 0; + + case MOXA_ASPP_OQUEUE:{ + int len, lsr; + + len = mxser_chars_in_buffer(tty); + spin_lock_irq(&info->slock); + lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE; + spin_unlock_irq(&info->slock); + len += (lsr ? 0 : 1); + + return put_user(len, (int __user *)argp); + } + case MOXA_ASPP_MON: { + int mcr, status; + + spin_lock_irq(&info->slock); + status = mxser_get_msr(info->ioaddr, 1, tty->index); + mxser_check_modem_status(tty, info, status); + + mcr = inb(info->ioaddr + UART_MCR); + spin_unlock_irq(&info->slock); + + if (mcr & MOXA_MUST_MCR_XON_FLAG) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; + + if (mcr & MOXA_MUST_MCR_TX_XON) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; + + if (tty->hw_stopped) + info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; + else + info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; + + if (copy_to_user(argp, &info->mon_data, + sizeof(struct mxser_mon))) + return -EFAULT; + + return 0; + } + case MOXA_ASPP_LSTATUS: { + if (put_user(info->err_shadow, (unsigned char __user *)argp)) + return -EFAULT; + + info->err_shadow = 0; + return 0; + } + case MOXA_SET_BAUD_METHOD: { + int method; + + if (get_user(method, (int __user *)argp)) + return -EFAULT; + mxser_set_baud_method[tty->index] = method; + return put_user(method, (int __user *)argp); + } default: return -ENOIOCTLCMD; } return 0; } - static void mxser_stoprx(struct tty_struct *tty) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - //unsigned long flags; - + struct mxser_port *info = tty->driver_data; info->ldisc_stop_rx = 1; if (I_IXOFF(tty)) { - - //MX_LOCK(&info->slock); - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) { + if (info->board->chip_flag) { info->IER &= ~MOXA_MUST_RECV_ISR; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); } else { - // above add by Victor Yu. 09-02-2002 - info->x_char = STOP_CHAR(tty); - // outb(info->IER, 0); // mask by Victor Yu. 09-02-2002 - outb(0, info->base + UART_IER); + outb(0, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); /* force Tx interrupt */ - } // add by Victor Yu. 09-02-2002 - //MX_UNLOCK(&info->slock); + outb(info->IER, info->ioaddr + UART_IER); + } } - if (info->tty->termios->c_cflag & CRTSCTS) { - //MX_LOCK(&info->slock); + if (tty->termios->c_cflag & CRTSCTS) { info->MCR &= ~UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - //MX_UNLOCK(&info->slock); + outb(info->MCR, info->ioaddr + UART_MCR); } } -static void mxser_startrx(struct tty_struct *tty) +/* + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + */ +static void mxser_throttle(struct tty_struct *tty) +{ + mxser_stoprx(tty); +} + +static void mxser_unthrottle(struct tty_struct *tty) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - //unsigned long flags; + struct mxser_port *info = tty->driver_data; + /* startrx */ info->ldisc_stop_rx = 0; if (I_IXOFF(tty)) { if (info->x_char) info->x_char = 0; else { - //MX_LOCK(&info->slock); - - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) { + if (info->board->chip_flag) { info->IER |= MOXA_MUST_RECV_ISR; - outb(info->IER, info->base + UART_IER); + outb(info->IER, info->ioaddr + UART_IER); } else { - // above add by Victor Yu. 09-02-2002 - info->x_char = START_CHAR(tty); - // outb(info->IER, 0); // mask by Victor Yu. 09-02-2002 - outb(0, info->base + UART_IER); // add by Victor Yu. 09-02-2002 - info->IER |= UART_IER_THRI; /* force Tx interrupt */ - outb(info->IER, info->base + UART_IER); - } // add by Victor Yu. 09-02-2002 - //MX_UNLOCK(&info->slock); + outb(0, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } } } - if (info->tty->termios->c_cflag & CRTSCTS) { - //MX_LOCK(&info->slock); + if (tty->termios->c_cflag & CRTSCTS) { info->MCR |= UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - //MX_UNLOCK(&info->slock); + outb(info->MCR, info->ioaddr + UART_MCR); } } /* - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. + * mxser_stop() and mxser_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. */ -static void mxser_throttle(struct tty_struct *tty) +static void mxser_stop(struct tty_struct *tty) { - //struct mxser_struct *info = (struct mxser_struct *)tty->driver_data; - //unsigned long flags; - //MX_LOCK(&info->slock); - mxser_stoprx(tty); - //MX_UNLOCK(&info->slock); -} + struct mxser_port *info = tty->driver_data; + unsigned long flags; -static void mxser_unthrottle(struct tty_struct *tty) -{ - //struct mxser_struct *info = (struct mxser_struct *)tty->driver_data; - //unsigned long flags; - //MX_LOCK(&info->slock); - mxser_startrx(tty); - //MX_UNLOCK(&info->slock); + spin_lock_irqsave(&info->slock, flags); + if (info->IER & UART_IER_THRI) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); } -static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios) +static void mxser_start(struct tty_struct *tty) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; - if ((tty->termios->c_cflag != old_termios->c_cflag) || (RELEVANT_IFLAG(tty->termios->c_iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) { + spin_lock_irqsave(&info->slock, flags); + if (info->xmit_cnt && info->port.xmit_buf) { + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); +} - mxser_change_speed(info, old_termios); +static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; - if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - mxser_start(tty); - } + spin_lock_irqsave(&info->slock, flags); + mxser_change_speed(tty, old_termios); + spin_unlock_irqrestore(&info->slock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + mxser_start(tty); } -/* Handle sw stopped */ - if ((old_termios->c_iflag & IXON) && !(tty->termios->c_iflag & IXON)) { + /* Handle sw stopped */ + if ((old_termios->c_iflag & IXON) && + !(tty->termios->c_iflag & IXON)) { tty->stopped = 0; - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) { + if (info->board->chip_flag) { spin_lock_irqsave(&info->slock, flags); - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); + mxser_disable_must_rx_software_flow_control( + info->ioaddr); spin_unlock_irqrestore(&info->slock, flags); } - // above add by Victor Yu. 09-02-2002 mxser_start(tty); } } /* - * mxser_stop() and mxser_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - */ -static void mxser_stop(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_start(struct tty_struct *tty) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -/* * mxser_wait_until_sent() --- wait until the transmitter is empty */ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long orig_jiffies, char_time; + unsigned long flags; int lsr; if (info->type == PORT_UNKNOWN) @@ -1778,19 +1995,24 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) if (!timeout || timeout > 2 * info->timeout) timeout = 2 * info->timeout; #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); + printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", + timeout, char_time); printk("jiff=%lu...", jiffies); #endif - while (!((lsr = inb(info->base + UART_LSR)) & UART_LSR_TEMT)) { + spin_lock_irqsave(&info->slock, flags); + while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...", lsr, jiffies); #endif + spin_unlock_irqrestore(&info->slock, flags); schedule_timeout_interruptible(char_time); + spin_lock_irqsave(&info->slock, flags); if (signal_pending(current)) break; if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } + spin_unlock_irqrestore(&info->slock, flags); set_current_state(TASK_RUNNING); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT @@ -1798,256 +2020,84 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) #endif } - /* * This routine is called by tty_hangup() when a hangup is signaled. */ -void mxser_hangup(struct tty_struct *tty) +static void mxser_hangup(struct tty_struct *tty) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; mxser_flush_buffer(tty); - mxser_shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - wake_up_interruptible(&info->open_wait); + tty_port_hangup(&info->port); } - -// added by James 03-12-2004. /* * mxser_rs_break() --- routine which turns the break handling on or off */ -static void mxser_rs_break(struct tty_struct *tty, int break_state) +static int mxser_rs_break(struct tty_struct *tty, int break_state) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; + struct mxser_port *info = tty->driver_data; unsigned long flags; spin_lock_irqsave(&info->slock, flags); if (break_state == -1) - outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR); + outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, + info->ioaddr + UART_LCR); else - outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR); + outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, + info->ioaddr + UART_LCR); spin_unlock_irqrestore(&info->slock, flags); + return 0; } -// (above) added by James. - - -/* - * This is the serial driver's generic interrupt routine - */ -static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - int status, iir, i; - struct mxser_struct *info; - struct mxser_struct *port; - int max, irqbits, bits, msr; - int pass_counter = 0; - int handled = IRQ_NONE; - - port = NULL; - //spin_lock(&gm_lock); - - for (i = 0; i < MXSER_BOARDS; i++) { - if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) { - port = dev_id; - break; - } - } - - if (i == MXSER_BOARDS) { - goto irq_stop; - } - if (port == 0) { - goto irq_stop; - } - max = mxser_numports[mxsercfg[i].board_type - 1]; - while (1) { - irqbits = inb(port->vector) & port->vectormask; - if (irqbits == port->vectormask) { - break; - } - - handled = IRQ_HANDLED; - for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { - if (irqbits == port->vectormask) { - break; - } - if (bits & irqbits) - continue; - info = port + i; - - // following add by Victor Yu. 09-13-2002 - iir = inb(info->base + UART_IIR); - if (iir & UART_IIR_NO_INT) - continue; - iir &= MOXA_MUST_IIR_MASK; - if (!info->tty) { - status = inb(info->base + UART_LSR); - outb(0x27, info->base + UART_FCR); - inb(info->base + UART_MSR); - continue; - } - // above add by Victor Yu. 09-13-2002 - /* - if ( info->tty->flip.count < TTY_FLIPBUF_SIZE/4 ){ - info->IER |= MOXA_MUST_RECV_ISR; - outb(info->IER, info->base + UART_IER); - } - */ - - - /* mask by Victor Yu. 09-13-2002 - if ( !info->tty || - (inb(info->base + UART_IIR) & UART_IIR_NO_INT) ) - continue; - */ - /* mask by Victor Yu. 09-02-2002 - status = inb(info->base + UART_LSR) & info->read_status_mask; - */ - - // following add by Victor Yu. 09-02-2002 - status = inb(info->base + UART_LSR); - - if (status & UART_LSR_PE) { - info->err_shadow |= NPPI_NOTIFY_PARITY; - } - if (status & UART_LSR_FE) { - info->err_shadow |= NPPI_NOTIFY_FRAMING; - } - if (status & UART_LSR_OE) { - info->err_shadow |= NPPI_NOTIFY_HW_OVERRUN; - } - if (status & UART_LSR_BI) - info->err_shadow |= NPPI_NOTIFY_BREAK; - - if (info->IsMoxaMustChipFlag) { - /* - if ( (status & 0x02) && !(status & 0x01) ) { - outb(info->base+UART_FCR, 0x23); - continue; - } - */ - if (iir == MOXA_MUST_IIR_GDA || iir == MOXA_MUST_IIR_RDA || iir == MOXA_MUST_IIR_RTO || iir == MOXA_MUST_IIR_LSR) - mxser_receive_chars(info, &status); - - } else { - // above add by Victor Yu. 09-02-2002 - - status &= info->read_status_mask; - if (status & UART_LSR_DR) - mxser_receive_chars(info, &status); - } - msr = inb(info->base + UART_MSR); - if (msr & UART_MSR_ANY_DELTA) { - mxser_check_modem_status(info, msr); - } - // following add by Victor Yu. 09-13-2002 - if (info->IsMoxaMustChipFlag) { - if ((iir == 0x02) && (status & UART_LSR_THRE)) { - mxser_transmit_chars(info); - } - } else { - // above add by Victor Yu. 09-13-2002 - - if (status & UART_LSR_THRE) { -/* 8-2-99 by William - if ( info->x_char || (info->xmit_cnt > 0) ) -*/ - mxser_transmit_chars(info); - } - } - } - if (pass_counter++ > MXSER_ISR_PASS_LIMIT) { - break; /* Prevent infinite loops */ - } - } - - irq_stop: - //spin_unlock(&gm_lock); - return handled; -} - -static void mxser_receive_chars(struct mxser_struct *info, int *status) +static void mxser_receive_chars(struct tty_struct *tty, + struct mxser_port *port, int *status) { - struct tty_struct *tty = info->tty; unsigned char ch, gdl; int ignored = 0; int cnt = 0; int recv_room; int max = 256; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - recv_room = tty->ldisc.receive_room(tty); - if ((recv_room == 0) && (!info->ldisc_stop_rx)) { - //mxser_throttle(tty); + recv_room = tty->receive_room; + if (recv_room == 0 && !port->ldisc_stop_rx) mxser_stoprx(tty); - //return; - } + if (port->board->chip_flag != MOXA_OTHER_UART) { - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { - - if (*status & UART_LSR_SPECIAL) { + if (*status & UART_LSR_SPECIAL) goto intr_old; - } - // following add by Victor Yu. 02-11-2004 - if (info->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID && (*status & MOXA_MUST_LSR_RERR)) + if (port->board->chip_flag == MOXA_MUST_MU860_HWID && + (*status & MOXA_MUST_LSR_RERR)) goto intr_old; - // above add by Victor Yu. 02-14-2004 if (*status & MOXA_MUST_LSR_RERR) goto intr_old; - gdl = inb(info->base + MOXA_MUST_GDL_REGISTER); + gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); - if (info->IsMoxaMustChipFlag == MOXA_MUST_MU150_HWID) // add by Victor Yu. 02-11-2004 + if (port->board->chip_flag == MOXA_MUST_MU150_HWID) gdl &= MOXA_MUST_GDL_MASK; if (gdl >= recv_room) { - if (!info->ldisc_stop_rx) { - //mxser_throttle(tty); + if (!port->ldisc_stop_rx) mxser_stoprx(tty); - } - //return; } while (gdl--) { - ch = inb(info->base + UART_RX); + ch = inb(port->ioaddr + UART_RX); tty_insert_flip_char(tty, ch, 0); cnt++; - /* - if((cnt>=HI_WATER) && (info->stop_rx==0)){ - mxser_stoprx(tty); - info->stop_rx=1; - break; - } */ } goto end_intr; } intr_old: - // above add by Victor Yu. 09-02-2002 do { if (max-- < 0) break; - /* - if((cnt>=HI_WATER) && (info->stop_rx==0)){ - mxser_stoprx(tty); - info->stop_rx=1; - break; - } - */ - ch = inb(info->base + UART_RX); - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag && (*status & UART_LSR_OE) /*&& !(*status&UART_LSR_DR) */ ) - outb(0x23, info->base + UART_FCR); - *status &= info->read_status_mask; - // above add by Victor Yu. 09-02-2002 - if (*status & info->ignore_status_mask) { + ch = inb(port->ioaddr + UART_RX); + if (port->board->chip_flag && (*status & UART_LSR_OE)) + outb(0x23, port->ioaddr + UART_FCR); + *status &= port->read_status_mask; + if (*status & port->ignore_status_mask) { if (++ignored > 100) break; } else { @@ -2055,963 +2105,385 @@ intr_old: if (*status & UART_LSR_SPECIAL) { if (*status & UART_LSR_BI) { flag = TTY_BREAK; -/* added by casper 1/11/2000 */ - info->icount.brk++; -/* */ - if (info->flags & ASYNC_SAK) + port->icount.brk++; + + if (port->port.flags & ASYNC_SAK) do_SAK(tty); } else if (*status & UART_LSR_PE) { flag = TTY_PARITY; -/* added by casper 1/11/2000 */ - info->icount.parity++; -/* */ + port->icount.parity++; } else if (*status & UART_LSR_FE) { flag = TTY_FRAME; -/* added by casper 1/11/2000 */ - info->icount.frame++; -/* */ + port->icount.frame++; } else if (*status & UART_LSR_OE) { flag = TTY_OVERRUN; -/* added by casper 1/11/2000 */ - info->icount.overrun++; -/* */ - } + port->icount.overrun++; + } else + flag = TTY_BREAK; } tty_insert_flip_char(tty, ch, flag); cnt++; if (cnt >= recv_room) { - if (!info->ldisc_stop_rx) { - //mxser_throttle(tty); + if (!port->ldisc_stop_rx) mxser_stoprx(tty); - } break; } } - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) + if (port->board->chip_flag) break; - // above add by Victor Yu. 09-02-2002 - /* mask by Victor Yu. 09-02-2002 - *status = inb(info->base + UART_LSR) & info->read_status_mask; - */ - // following add by Victor Yu. 09-02-2002 - *status = inb(info->base + UART_LSR); - // above add by Victor Yu. 09-02-2002 + *status = inb(port->ioaddr + UART_LSR); } while (*status & UART_LSR_DR); -end_intr: // add by Victor Yu. 09-02-2002 - - mxvar_log.rxcnt[info->port] += cnt; - info->mon_data.rxcnt += cnt; - info->mon_data.up_rxcnt += cnt; - spin_unlock_irqrestore(&info->slock, flags); +end_intr: + mxvar_log.rxcnt[tty->index] += cnt; + port->mon_data.rxcnt += cnt; + port->mon_data.up_rxcnt += cnt; + /* + * We are called from an interrupt context with &port->slock + * being held. Drop it temporarily in order to prevent + * recursive locking. + */ + spin_unlock(&port->slock); tty_flip_buffer_push(tty); + spin_lock(&port->slock); } -static void mxser_transmit_chars(struct mxser_struct *info) +static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) { int count, cnt; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - - if (info->x_char) { - outb(info->x_char, info->base + UART_TX); - info->x_char = 0; - mxvar_log.txcnt[info->port]++; - info->mon_data.txcnt++; - info->mon_data.up_txcnt++; -/* added by casper 1/11/2000 */ - info->icount.tx++; -/* */ - spin_unlock_irqrestore(&info->slock, flags); + if (port->x_char) { + outb(port->x_char, port->ioaddr + UART_TX); + port->x_char = 0; + mxvar_log.txcnt[tty->index]++; + port->mon_data.txcnt++; + port->mon_data.up_txcnt++; + port->icount.tx++; return; } - if (info->xmit_buf == 0) { - spin_unlock_irqrestore(&info->slock, flags); + if (port->port.xmit_buf == NULL) return; - } - if ((info->xmit_cnt <= 0) || info->tty->stopped || (info->tty->hw_stopped && (info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag))) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); + if (port->xmit_cnt <= 0 || tty->stopped || + (tty->hw_stopped && + (port->type != PORT_16550A) && + (!port->board->chip_flag))) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); return; } - cnt = info->xmit_cnt; - count = info->xmit_fifo_size; + cnt = port->xmit_cnt; + count = port->xmit_fifo_size; do { - outb(info->xmit_buf[info->xmit_tail++], info->base + UART_TX); - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE - 1); - if (--info->xmit_cnt <= 0) + outb(port->port.xmit_buf[port->xmit_tail++], + port->ioaddr + UART_TX); + port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); + if (--port->xmit_cnt <= 0) break; } while (--count > 0); - mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt); - -// added by James 03-12-2004. - info->mon_data.txcnt += (cnt - info->xmit_cnt); - info->mon_data.up_txcnt += (cnt - info->xmit_cnt); -// (above) added by James. - -/* added by casper 1/11/2000 */ - info->icount.tx += (cnt - info->xmit_cnt); -/* */ - - if (info->xmit_cnt < WAKEUP_CHARS) { - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); - } - if (info->xmit_cnt <= 0) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - spin_unlock_irqrestore(&info->slock, flags); -} - -static void mxser_check_modem_status(struct mxser_struct *info, int status) -{ - /* update input line counters */ - if (status & UART_MSR_TERI) - info->icount.rng++; - if (status & UART_MSR_DDSR) - info->icount.dsr++; - if (status & UART_MSR_DDCD) - info->icount.dcd++; - if (status & UART_MSR_DCTS) - info->icount.cts++; - info->mon_data.modem_status = status; - wake_up_interruptible(&info->delta_msr_wait); + mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt); + port->mon_data.txcnt += (cnt - port->xmit_cnt); + port->mon_data.up_txcnt += (cnt - port->xmit_cnt); + port->icount.tx += (cnt - port->xmit_cnt); - if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { - if (status & UART_MSR_DCD) - wake_up_interruptible(&info->open_wait); - schedule_work(&info->tqueue); - } - - if (info->flags & ASYNC_CTS_FLOW) { - if (info->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; + if (port->xmit_cnt < WAKEUP_CHARS && tty) + tty_wakeup(tty); - if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); } - } else { - if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - } - } + if (port->xmit_cnt <= 0) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); } } -static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info) +/* + * This is the serial driver's generic interrupt routine + */ +static irqreturn_t mxser_interrupt(int irq, void *dev_id) { - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return (0); - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * mxser_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); + int status, iir, i; + struct mxser_board *brd = NULL; + struct mxser_port *port; + int max, irqbits, bits, msr; + unsigned int int_cnt, pass_counter = 0; + int handled = IRQ_NONE; + struct tty_struct *tty; - spin_lock_irqsave(&info->slock, flags); - if (!tty_hung_up_p(filp)) - info->count--; - spin_unlock_irqrestore(&info->slock, flags); - info->blocked_open++; - while (1) { - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_MCR) | UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) { - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(info->flags & ASYNC_CLOSING) && (do_clocal || (inb(info->base + UART_MSR) & UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; + for (i = 0; i < MXSER_BOARDS; i++) + if (dev_id == &mxser_boards[i]) { + brd = dev_id; break; } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - info->count++; - info->blocked_open--; - if (retval) - return (retval); - info->flags |= ASYNC_NORMAL_ACTIVE; - return (0); -} - -static int mxser_startup(struct mxser_struct *info) -{ - - unsigned long page; - unsigned long flags; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return (-ENOMEM); - - spin_lock_irqsave(&info->slock, flags); - - if (info->flags & ASYNC_INITIALIZED) { - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return (0); - } - - if (!info->base || !info->type) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return (0); - } - if (info->xmit_buf) - free_page(page); - else - info->xmit_buf = (unsigned char *) page; - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in mxser_change_speed()) - */ - if (info->IsMoxaMustChipFlag) - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR); - else - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR); - - /* - * At this point there's no way the LSR could still be 0xFF; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (inb(info->base + UART_LSR) == 0xff) { - spin_unlock_irqrestore(&info->slock, flags); - if (capable(CAP_SYS_ADMIN)) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - return (0); - } else - return (-ENODEV); - } - /* - * Clear the interrupt registers. - */ - (void) inb(info->base + UART_LSR); - (void) inb(info->base + UART_RX); - (void) inb(info->base + UART_IIR); - (void) inb(info->base + UART_MSR); - - /* - * Now, initialize the UART - */ - outb(UART_LCR_WLEN8, info->base + UART_LCR); /* reset DLAB */ - info->MCR = UART_MCR_DTR | UART_MCR_RTS; - outb(info->MCR, info->base + UART_MCR); - - /* - * Finally, enable interrupts - */ - info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; -// info->IER = UART_IER_RLSI | UART_IER_RDI; - - // following add by Victor Yu. 08-30-2002 - if (info->IsMoxaMustChipFlag) - info->IER |= MOXA_MUST_IER_EGDAI; - // above add by Victor Yu. 08-30-2002 - outb(info->IER, info->base + UART_IER); /* enable interrupts */ - - /* - * And clear the interrupt registers again for luck. - */ - (void) inb(info->base + UART_LSR); - (void) inb(info->base + UART_RX); - (void) inb(info->base + UART_IIR); - (void) inb(info->base + UART_MSR); + if (i == MXSER_BOARDS) + goto irq_stop; + if (brd == NULL) + goto irq_stop; + max = brd->info->nports; + while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { + irqbits = inb(brd->vector) & brd->vector_mask; + if (irqbits == brd->vector_mask) + break; - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + handled = IRQ_HANDLED; + for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { + if (irqbits == brd->vector_mask) + break; + if (bits & irqbits) + continue; + port = &brd->ports[i]; - /* - * and set the speed of the serial port - */ - spin_unlock_irqrestore(&info->slock, flags); - mxser_change_speed(info, NULL); - - info->flags |= ASYNC_INITIALIZED; - return (0); -} - -/* - * This routine will shutdown a serial port; interrupts maybe disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void mxser_shutdown(struct mxser_struct *info) -{ - unsigned long flags; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - spin_lock_irqsave(&info->slock, flags); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->delta_msr_wait); - - /* - * Free the IRQ, if necessary - */ - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - - info->IER = 0; - outb(0x00, info->base + UART_IER); - - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); - outb(info->MCR, info->base + UART_MCR); - - /* clear Rx/Tx FIFO's */ - // following add by Victor Yu. 08-30-2002 - if (info->IsMoxaMustChipFlag) - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR); - else - // above add by Victor Yu. 08-30-2002 - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR); - - /* read data port to reset things */ - (void) inb(info->base + UART_RX); - - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - - // following add by Victor Yu. 09-23-2002 - if (info->IsMoxaMustChipFlag) { - SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->base); - } - // above add by Victor Yu. 09-23-2002 - - spin_unlock_irqrestore(&info->slock, flags); -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios) -{ - unsigned cflag, cval, fcr; - int ret = 0; - unsigned char status; - long baud; - unsigned long flags; - - - if (!info->tty || !info->tty->termios) - return ret; - cflag = info->tty->termios->c_cflag; - if (!(info->base)) - return ret; - - -#ifndef B921600 -#define B921600 (B460800 +1) -#endif - if (mxser_set_baud_method[info->port] == 0) { - switch (cflag & (CBAUD | CBAUDEX)) { - case B921600: - baud = 921600; - break; - case B460800: - baud = 460800; - break; - case B230400: - baud = 230400; - break; - case B115200: - baud = 115200; - break; - case B57600: - baud = 57600; - break; - case B38400: - baud = 38400; - break; - case B19200: - baud = 19200; - break; - case B9600: - baud = 9600; - break; - case B4800: - baud = 4800; - break; - case B2400: - baud = 2400; - break; - case B1800: - baud = 1800; - break; - case B1200: - baud = 1200; - break; - case B600: - baud = 600; - break; - case B300: - baud = 300; - break; - case B200: - baud = 200; - break; - case B150: - baud = 150; - break; - case B134: - baud = 134; - break; - case B110: - baud = 110; - break; - case B75: - baud = 75; - break; - case B50: - baud = 50; - break; - default: - baud = 0; - break; - } - mxser_set_baud(info, baud); - } - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; - break; - case CS6: - cval = 0x01; - break; - case CS7: - cval = 0x02; - break; - case CS8: - cval = 0x03; - break; - default: - cval = 0x00; - break; /* too keep GCC shut... */ - } - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) { - cval |= UART_LCR_EPAR; - } - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; - - if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->IsMoxaMustChipFlag) { - fcr = UART_FCR_ENABLE_FIFO; - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else - fcr = 0; - } else { - fcr = UART_FCR_ENABLE_FIFO; - // following add by Victor Yu. 08-30-2002 - if (info->IsMoxaMustChipFlag) { - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - SET_MOXA_MUST_FIFO_VALUE(info); - } else { - // above add by Victor Yu. 08-30-2002 - - switch (info->rx_trigger) { - case 1: - fcr |= UART_FCR_TRIGGER_1; - break; - case 4: - fcr |= UART_FCR_TRIGGER_4; - break; - case 8: - fcr |= UART_FCR_TRIGGER_8; - break; - default: - fcr |= UART_FCR_TRIGGER_14; - break; - } - } - } - - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - info->MCR &= ~UART_MCR_AFE; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - if ((info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) { - info->MCR |= UART_MCR_AFE; - //status = mxser_get_msr(info->base, 0, info->port); -/* save_flags(flags); - cli(); - status = inb(baseaddr + UART_MSR); - restore_flags(flags);*/ - //mxser_check_modem_status(info, status); - } else { - //status = mxser_get_msr(info->base, 0, info->port); - - //MX_LOCK(&info->slock); - status = inb(info->base + UART_MSR); - //MX_UNLOCK(&info->slock); - if (info->tty->hw_stopped) { - if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; - if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) { - info->IER |= UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - set_bit(MXSER_EVENT_TXLOW, &info->event); - schedule_work(&info->tqueue); } - } else { - if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->base + UART_IER); - } - } - } - } - } else { - info->flags &= ~ASYNC_CTS_FLOW; - } - outb(info->MCR, info->base + UART_MCR); - if (cflag & CLOCAL) { - info->flags &= ~ASYNC_CHECK_CD; - } else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - outb(info->IER, info->base + UART_IER); - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; - - if (I_IGNBRK(info->tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->tty)) { - info->ignore_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; - info->read_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE; - } - } - // following add by Victor Yu. 09-02-2002 - if (info->IsMoxaMustChipFlag) { - spin_lock_irqsave(&info->slock, flags); - SET_MOXA_MUST_XON1_VALUE(info->base, START_CHAR(info->tty)); - SET_MOXA_MUST_XOFF1_VALUE(info->base, STOP_CHAR(info->tty)); - if (I_IXON(info->tty)) { - ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); - } else { - DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); - } - if (I_IXOFF(info->tty)) { - ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base); - } else { - DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base); - } - /* - if ( I_IXANY(info->tty) ) { - info->MCR |= MOXA_MUST_MCR_XON_ANY; - ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base); - } else { - info->MCR &= ~MOXA_MUST_MCR_XON_ANY; - DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base); - } - */ - spin_unlock_irqrestore(&info->slock, flags); - } - // above add by Victor Yu. 09-02-2002 - - - outb(fcr, info->base + UART_FCR); /* set fcr */ - outb(cval, info->base + UART_LCR); - - return ret; -} - - -static int mxser_set_baud(struct mxser_struct *info, long newspd) -{ - int quot = 0; - unsigned char cval; - int ret = 0; - unsigned long flags; - - if (!info->tty || !info->tty->termios) - return ret; - - if (!(info->base)) - return ret; - - if (newspd > info->MaxCanSetBaudRate) - return 0; - - info->realbaud = newspd; - if (newspd == 134) { - quot = (2 * info->baud_base / 269); - } else if (newspd) { - quot = info->baud_base / newspd; - - if (quot == 0) - quot = 1; - - } else { - quot = 0; - } - - info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); - info->timeout += HZ / 50; /* Add .02 seconds of slop */ - - if (quot) { - spin_lock_irqsave(&info->slock, flags); - info->MCR |= UART_MCR_DTR; - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - } else { - spin_lock_irqsave(&info->slock, flags); - info->MCR &= ~UART_MCR_DTR; - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return ret; - } - - cval = inb(info->base + UART_LCR); - - outb(cval | UART_LCR_DLAB, info->base + UART_LCR); /* set DLAB */ - - outb(quot & 0xff, info->base + UART_DLL); /* LS of divisor */ - outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */ - outb(cval, info->base + UART_LCR); /* reset DLAB */ - - - return ret; -} - - - -/* - * ------------------------------------------------------------ - * friends of mxser_ioctl() - * ------------------------------------------------------------ - */ -static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return (-EFAULT); - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->port; - tmp.port = info->base; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - tmp.hub6 = 0; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return (0); -} - -static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - unsigned int flags; - int retval = 0; - - if (!new_info || !info->base) - return (-EFAULT); - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - if ((new_serial.irq != info->irq) || (new_serial.port != info->base) || (new_serial.custom_divisor != info->custom_divisor) || (new_serial.baud_base != info->baud_base)) - return (-EPERM); - - flags = info->flags & ASYNC_SPD_MASK; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || (new_serial.close_delay != info->close_delay) || ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) - return (-EPERM); - info->flags = ((info->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); - } else { - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - info->flags = ((info->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay * HZ / 100; - info->closing_wait = new_serial.closing_wait * HZ / 100; - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - info->tty->low_latency = 0; //(info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - } - - /* added by casper, 3/17/2000, for mouse */ - info->type = new_serial.type; - - process_txrx_fifo(info); - - /* */ - if (info->flags & ASYNC_INITIALIZED) { - if (flags != (info->flags & ASYNC_SPD_MASK)) { - mxser_change_speed(info, NULL); - } - } else { - retval = mxser_startup(info); - } - return (retval); -} - -/* - * mxser_get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *value) -{ - unsigned char status; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - status = inb(info->base + UART_LSR); - spin_unlock_irqrestore(&info->slock, flags); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} + int_cnt = 0; + spin_lock(&port->slock); + do { + iir = inb(port->ioaddr + UART_IIR); + if (iir & UART_IIR_NO_INT) + break; + iir &= MOXA_MUST_IIR_MASK; + tty = tty_port_tty_get(&port->port); + if (!tty || + (port->port.flags & ASYNC_CLOSING) || + !(port->port.flags & + ASYNC_INITIALIZED)) { + status = inb(port->ioaddr + UART_LSR); + outb(0x27, port->ioaddr + UART_FCR); + inb(port->ioaddr + UART_MSR); + tty_kref_put(tty); + break; + } -/* - * This routine sends a break character out the serial port. - */ -static void mxser_send_break(struct mxser_struct *info, int duration) -{ - unsigned long flags; + status = inb(port->ioaddr + UART_LSR); + + if (status & UART_LSR_PE) + port->err_shadow |= NPPI_NOTIFY_PARITY; + if (status & UART_LSR_FE) + port->err_shadow |= NPPI_NOTIFY_FRAMING; + if (status & UART_LSR_OE) + port->err_shadow |= + NPPI_NOTIFY_HW_OVERRUN; + if (status & UART_LSR_BI) + port->err_shadow |= NPPI_NOTIFY_BREAK; + + if (port->board->chip_flag) { + if (iir == MOXA_MUST_IIR_GDA || + iir == MOXA_MUST_IIR_RDA || + iir == MOXA_MUST_IIR_RTO || + iir == MOXA_MUST_IIR_LSR) + mxser_receive_chars(tty, port, + &status); - if (!info->base) - return; - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); - schedule_timeout(duration); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); -} + } else { + status &= port->read_status_mask; + if (status & UART_LSR_DR) + mxser_receive_chars(tty, port, + &status); + } + msr = inb(port->ioaddr + UART_MSR); + if (msr & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, port, msr); + + if (port->board->chip_flag) { + if (iir == 0x02 && (status & + UART_LSR_THRE)) + mxser_transmit_chars(tty, port); + } else { + if (status & UART_LSR_THRE) + mxser_transmit_chars(tty, port); + } + tty_kref_put(tty); + } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); + spin_unlock(&port->slock); + } + } -static int mxser_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned char control, status; - unsigned long flags; +irq_stop: + return handled; +} +static const struct tty_operations mxser_ops = { + .open = mxser_open, + .close = mxser_close, + .write = mxser_write, + .put_char = mxser_put_char, + .flush_chars = mxser_flush_chars, + .write_room = mxser_write_room, + .chars_in_buffer = mxser_chars_in_buffer, + .flush_buffer = mxser_flush_buffer, + .ioctl = mxser_ioctl, + .throttle = mxser_throttle, + .unthrottle = mxser_unthrottle, + .set_termios = mxser_set_termios, + .stop = mxser_stop, + .start = mxser_start, + .hangup = mxser_hangup, + .break_ctl = mxser_rs_break, + .wait_until_sent = mxser_wait_until_sent, + .tiocmget = mxser_tiocmget, + .tiocmset = mxser_tiocmset, +}; - if (tty->index == MXSER_PORTS) - return (-ENOIOCTLCMD); - if (tty->flags & (1 << TTY_IO_ERROR)) - return (-EIO); +struct tty_port_operations mxser_port_ops = { + .carrier_raised = mxser_carrier_raised, + .dtr_rts = mxser_dtr_rts, + .activate = mxser_activate, + .shutdown = mxser_shutdown_port, +}; - control = info->MCR; +/* + * The MOXA Smartio/Industio serial driver boot-time initialization code! + */ - spin_lock_irqsave(&info->slock, flags); - status = inb(info->base + UART_MSR); - if (status & UART_MSR_ANY_DELTA) - mxser_check_modem_status(info, status); - spin_unlock_irqrestore(&info->slock, flags); - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | - ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev, + unsigned int irq) +{ + if (irq) + free_irq(brd->irq, brd); + if (pdev != NULL) { /* PCI */ +#ifdef CONFIG_PCI + pci_release_region(pdev, 2); + pci_release_region(pdev, 3); +#endif + } else { + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + release_region(brd->vector, 1); + } } -static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) +static int __devinit mxser_initbrd(struct mxser_board *brd, + struct pci_dev *pdev) { - struct mxser_struct *info = (struct mxser_struct *) tty->driver_data; - unsigned long flags; + struct mxser_port *info; + unsigned int i; + int retval; + printk(KERN_INFO "mxser: max. baud rate = %d bps\n", + brd->ports[0].max_baud); - if (tty->index == MXSER_PORTS) - return -ENOIOCTLCMD; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; + for (i = 0; i < brd->info->nports; i++) { + info = &brd->ports[i]; + tty_port_init(&info->port); + info->port.ops = &mxser_port_ops; + info->board = brd; + info->stop_rx = 0; + info->ldisc_stop_rx = 0; - spin_lock_irqsave(&info->slock, flags); + /* Enhance mode enabled here */ + if (brd->chip_flag != MOXA_OTHER_UART) + mxser_enable_must_enchance_mode(info->ioaddr); - if (set & TIOCM_RTS) - info->MCR |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->MCR |= UART_MCR_DTR; + info->port.flags = ASYNC_SHARE_IRQ; + info->type = brd->uart_type; - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; + process_txrx_fifo(info); - outb(info->MCR, info->base + UART_MCR); - spin_unlock_irqrestore(&info->slock, flags); - return 0; -} + info->custom_divisor = info->baud_base * 16; + info->port.close_delay = 5 * HZ / 10; + info->port.closing_wait = 30 * HZ; + info->normal_termios = mxvar_sdriver->init_termios; + memset(&info->mon_data, 0, sizeof(struct mxser_mon)); + info->err_shadow = 0; + spin_lock_init(&info->slock); + /* before set INT ISR, disable all int */ + outb(inb(info->ioaddr + UART_IER) & 0xf0, + info->ioaddr + UART_IER); + } -static int mxser_read_register(int, unsigned short *); -static int mxser_program_mode(int); -static void mxser_normal_mode(int); + retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", + brd); + if (retval) { + printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " + "conflict with another device.\n", + brd->info->name, brd->irq); + /* We hold resources, we need to release them. */ + mxser_release_res(brd, pdev, 0); + } + return retval; +} -static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf) +static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) { int id, i, bits; unsigned short regs[16], irq; unsigned char scratch, scratch2; - hwconf->IsMoxaMustChipFlag = MOXA_OTHER_UART; + brd->chip_flag = MOXA_OTHER_UART; id = mxser_read_register(cap, regs); - if (id == C168_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C168_ISA; - hwconf->ports = 8; - } else if (id == C104_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C104_ISA; - hwconf->ports = 4; - } else if (id == C102_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_C102_ISA; - hwconf->ports = 2; - } else if (id == CI132_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI132; - hwconf->ports = 2; - } else if (id == CI134_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI134; - hwconf->ports = 4; - } else if (id == CI104J_ASIC_ID) { - hwconf->board_type = MXSER_BOARD_CI104J; - hwconf->ports = 4; - } else - return (0); + switch (id) { + case C168_ASIC_ID: + brd->info = &mxser_cards[0]; + break; + case C104_ASIC_ID: + brd->info = &mxser_cards[1]; + break; + case CI104J_ASIC_ID: + brd->info = &mxser_cards[2]; + break; + case C102_ASIC_ID: + brd->info = &mxser_cards[5]; + break; + case CI132_ASIC_ID: + brd->info = &mxser_cards[6]; + break; + case CI134_ASIC_ID: + brd->info = &mxser_cards[7]; + break; + default: + return 0; + } irq = 0; - if (hwconf->ports == 2) { + /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) + Flag-hack checks if configuration should be read as 2-port here. */ + if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { irq = regs[9] & 0xF000; irq = irq | (irq >> 4); if (irq != (regs[9] & 0xFF00)) - return (MXSER_ERR_IRQ_CONFLIT); - } else if (hwconf->ports == 4) { + goto err_irqconflict; + } else if (brd->info->nports == 4) { irq = regs[9] & 0xF000; irq = irq | (irq >> 4); irq = irq | (irq >> 8); if (irq != regs[9]) - return (MXSER_ERR_IRQ_CONFLIT); - } else if (hwconf->ports == 8) { + goto err_irqconflict; + } else if (brd->info->nports == 8) { irq = regs[9] & 0xF000; irq = irq | (irq >> 4); irq = irq | (irq >> 8); if ((irq != regs[9]) || (irq != regs[10])) - return (MXSER_ERR_IRQ_CONFLIT); + goto err_irqconflict; } if (!irq) { - return (MXSER_ERR_IRQ); + printk(KERN_ERR "mxser: interrupt number unset\n"); + return -EIO; } - hwconf->irq = ((int) (irq & 0xF000) >> 12); + brd->irq = ((int)(irq & 0xF000) >> 12); for (i = 0; i < 8; i++) - hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8; + brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; if ((regs[12] & 0x80) == 0) { - return (MXSER_ERR_VECTOR); + printk(KERN_ERR "mxser: invalid interrupt vector\n"); + return -EIO; } - hwconf->vector = (int) regs[11]; /* interrupt vector */ + brd->vector = (int)regs[11]; /* interrupt vector */ if (id == 1) - hwconf->vector_mask = 0x00FF; + brd->vector_mask = 0x00FF; else - hwconf->vector_mask = 0x000F; + brd->vector_mask = 0x000F; for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { if (regs[12] & bits) { - hwconf->baud_base[i] = 921600; - hwconf->MaxCanSetBaudRate[i] = 921600; // add by Victor Yu. 09-04-2002 + brd->ports[i].baud_base = 921600; + brd->ports[i].max_baud = 921600; } else { - hwconf->baud_base[i] = 115200; - hwconf->MaxCanSetBaudRate[i] = 115200; // add by Victor Yu. 09-04-2002 + brd->ports[i].baud_base = 115200; + brd->ports[i].max_baud = 115200; } } scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); @@ -3022,118 +2494,254 @@ static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf) scratch = inb(cap + UART_IIR); if (scratch & 0xC0) - hwconf->uart_type = PORT_16550A; + brd->uart_type = PORT_16550A; else - hwconf->uart_type = PORT_16450; - if (id == 1) - hwconf->ports = 8; - else - hwconf->ports = 4; - request_region(hwconf->ioaddr[0], 8 * hwconf->ports, "mxser(IO)"); - request_region(hwconf->vector, 1, "mxser(vector)"); - return (hwconf->ports); + brd->uart_type = PORT_16450; + if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, + "mxser(IO)")) { + printk(KERN_ERR "mxser: can't request ports I/O region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; + } + if (!request_region(brd->vector, 1, "mxser(vector)")) { + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + printk(KERN_ERR "mxser: can't request interrupt vector region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; + } + return brd->info->nports; + +err_irqconflict: + printk(KERN_ERR "mxser: invalid interrupt number\n"); + return -EIO; } -#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ -#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ -#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ -#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ -#define EN_CCMD 0x000 /* Chip's command register */ -#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ -#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ -#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ -#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ -#define EN0_DCFG 0x00E /* Data configuration reg WR */ -#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ -#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ -#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ -static int mxser_read_register(int port, unsigned short *regs) +static int __devinit mxser_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { - int i, k, value, id; - unsigned int j; +#ifdef CONFIG_PCI + struct mxser_board *brd; + unsigned int i, j; + unsigned long ioaddress; + int retval = -EINVAL; - id = mxser_program_mode(port); - if (id < 0) - return (id); - for (i = 0; i < 14; i++) { - k = (i & 0x3F) | 0x180; - for (j = 0x100; j > 0; j >>= 1) { - outb(CHIP_CS, port); - if (k & j) { - outb(CHIP_CS | CHIP_DO, port); - outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ - } else { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info == NULL) + break; + + if (i >= MXSER_BOARDS) { + dev_err(&pdev->dev, "too many boards found (maximum %d), board " + "not configured\n", MXSER_BOARDS); + goto err; + } + + brd = &mxser_boards[i]; + brd->idx = i * MXSER_PORTS_PER_BOARD; + dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n", + mxser_cards[ent->driver_data].name, + pdev->bus->number, PCI_SLOT(pdev->devfn)); + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "PCI enable failed\n"); + goto err; + } + + /* io address */ + ioaddress = pci_resource_start(pdev, 2); + retval = pci_request_region(pdev, 2, "mxser(IO)"); + if (retval) + goto err; + + brd->info = &mxser_cards[ent->driver_data]; + for (i = 0; i < brd->info->nports; i++) + brd->ports[i].ioaddr = ioaddress + 8 * i; + + /* vector */ + ioaddress = pci_resource_start(pdev, 3); + retval = pci_request_region(pdev, 3, "mxser(vector)"); + if (retval) + goto err_relio; + brd->vector = ioaddress; + + /* irq */ + brd->irq = pdev->irq; + + brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); + brd->uart_type = PORT_16550A; + brd->vector_mask = 0; + + for (i = 0; i < brd->info->nports; i++) { + for (j = 0; j < UART_INFO_NUM; j++) { + if (Gpci_uart_info[j].type == brd->chip_flag) { + brd->ports[i].max_baud = + Gpci_uart_info[j].max_baud; + + /* exception....CP-102 */ + if (brd->info->flags & MXSER_HIGHBAUD) + brd->ports[i].max_baud = 921600; + break; } } - (void) inb(port); - value = 0; - for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { - outb(CHIP_CS, port); - outb(CHIP_CS | CHIP_SK, port); - if (inb(port) & CHIP_DI) - value |= j; + } + + if (brd->chip_flag == MOXA_MUST_MU860_HWID) { + for (i = 0; i < brd->info->nports; i++) { + if (i < 4) + brd->ports[i].opmode_ioaddr = ioaddress + 4; + else + brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; } - regs[i] = value; - outb(0, port); + outb(0, ioaddress + 4); /* default set to RS232 mode */ + outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ } - mxser_normal_mode(port); - return (id); + + for (i = 0; i < brd->info->nports; i++) { + brd->vector_mask |= (1 << i); + brd->ports[i].baud_base = 921600; + } + + /* mxser_initbrd will hook ISR. */ + retval = mxser_initbrd(brd, pdev); + if (retval) + goto err_null; + + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev); + + pci_set_drvdata(pdev, brd); + + return 0; +err_relio: + pci_release_region(pdev, 2); +err_null: + brd->info = NULL; +err: + return retval; +#else + return -ENODEV; +#endif } -static int mxser_program_mode(int port) +static void __devexit mxser_remove(struct pci_dev *pdev) { - int id, i, j, n; - //unsigned long flags; + struct mxser_board *brd = pci_get_drvdata(pdev); + unsigned int i; - spin_lock(&gm_lock); - outb(0, port); - outb(0, port); - outb(0, port); - (void) inb(port); - (void) inb(port); - outb(0, port); - (void) inb(port); - //restore_flags(flags); - spin_unlock(&gm_lock); + for (i = 0; i < brd->info->nports; i++) + tty_unregister_device(mxvar_sdriver, brd->idx + i); - id = inb(port + 1) & 0x1F; - if ((id != C168_ASIC_ID) && (id != C104_ASIC_ID) && (id != C102_ASIC_ID) && (id != CI132_ASIC_ID) && (id != CI134_ASIC_ID) && (id != CI104J_ASIC_ID)) - return (-1); - for (i = 0, j = 0; i < 4; i++) { - n = inb(port + 2); - if (n == 'M') { - j = 1; - } else if ((j == 1) && (n == 1)) { - j = 2; - break; - } else - j = 0; - } - if (j != 2) - id = -2; - return (id); + mxser_release_res(brd, pdev, 1); + brd->info = NULL; } -static void mxser_normal_mode(int port) +static struct pci_driver mxser_driver = { + .name = "mxser", + .id_table = mxser_pcibrds, + .probe = mxser_probe, + .remove = __devexit_p(mxser_remove) +}; + +static int __init mxser_module_init(void) { - int i, n; + struct mxser_board *brd; + unsigned int b, i, m; + int retval; - outb(0xA5, port + 1); - outb(0x80, port + 3); - outb(12, port + 0); /* 9600 bps */ - outb(0, port + 1); - outb(0x03, port + 3); /* 8 data bits */ - outb(0x13, port + 4); /* loop back mode */ - for (i = 0; i < 16; i++) { - n = inb(port + 5); - if ((n & 0x61) == 0x60) - break; - if ((n & 1) == 1) - (void) inb(port); + mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); + if (!mxvar_sdriver) + return -ENOMEM; + + printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", + MXSER_VERSION); + + /* Initialize the tty_driver structure */ + mxvar_sdriver->owner = THIS_MODULE; + mxvar_sdriver->magic = TTY_DRIVER_MAGIC; + mxvar_sdriver->name = "ttyMI"; + mxvar_sdriver->major = ttymajor; + mxvar_sdriver->minor_start = 0; + mxvar_sdriver->num = MXSER_PORTS + 1; + mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; + mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; + mxvar_sdriver->init_termios = tty_std_termios; + mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(mxvar_sdriver, &mxser_ops); + + retval = tty_register_driver(mxvar_sdriver); + if (retval) { + printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " + "tty driver !\n"); + goto err_put; } - outb(0x00, port + 4); + + /* Start finding ISA boards here */ + for (m = 0, b = 0; b < MXSER_BOARDS; b++) { + if (!ioaddr[b]) + continue; + + brd = &mxser_boards[m]; + retval = mxser_get_ISA_conf(ioaddr[b], brd); + if (retval <= 0) { + brd->info = NULL; + continue; + } + + printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n", + brd->info->name, ioaddr[b]); + + /* mxser_initbrd will hook ISR. */ + if (mxser_initbrd(brd, NULL) < 0) { + brd->info = NULL; + continue; + } + + brd->idx = m * MXSER_PORTS_PER_BOARD; + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, NULL); + + m++; + } + + retval = pci_register_driver(&mxser_driver); + if (retval) { + printk(KERN_ERR "mxser: can't register pci driver\n"); + if (!m) { + retval = -ENODEV; + goto err_unr; + } /* else: we have some ISA cards under control */ + } + + return 0; +err_unr: + tty_unregister_driver(mxvar_sdriver); +err_put: + put_tty_driver(mxvar_sdriver); + return retval; +} + +static void __exit mxser_module_exit(void) +{ + unsigned int i, j; + + pci_unregister_driver(&mxser_driver); + + for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ + if (mxser_boards[i].info != NULL) + for (j = 0; j < mxser_boards[i].info->nports; j++) + tty_unregister_device(mxvar_sdriver, + mxser_boards[i].idx + j); + tty_unregister_driver(mxvar_sdriver); + put_tty_driver(mxvar_sdriver); + + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info != NULL) + mxser_release_res(&mxser_boards[i], NULL, 1); } module_init(mxser_module_init);