X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fata%2Fsata_vsc.c;h=8b2a278b25471af9427b8e32f705c2e3d8c01304;hb=88358ab08944da726e948d216977ad499dfc15c6;hp=95ae3ed24a9dd39eb6b223e87dbb16b918ba2108;hpb=5796d1c4c89efff823259fda35b08ea66ebf8b23;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 95ae3ed..8b2a278 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -98,20 +98,22 @@ enum {
 			      VSC_SATA_INT_PHY_CHANGE),
 };
 
-static int vsc_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
+static int vsc_sata_scr_read(struct ata_link *link,
+			     unsigned int sc_reg, u32 *val)
 {
 	if (sc_reg > SCR_CONTROL)
 		return -EINVAL;
-	*val = readl(ap->ioaddr.scr_addr + (sc_reg * 4));
+	*val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4));
 	return 0;
 }
 
 
-static int vsc_sata_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
+static int vsc_sata_scr_write(struct ata_link *link,
+			      unsigned int sc_reg, u32 val)
 {
 	if (sc_reg > SCR_CONTROL)
 		return -EINVAL;
-	writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+	writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
 	return 0;
 }
 
@@ -200,7 +202,7 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	u16 nsect, lbal, lbam, lbah, feature;
 
-	tf->command = ata_check_status(ap);
+	tf->command = ata_sff_check_status(ap);
 	tf->device = readw(ioaddr->device_addr);
 	feature = readw(ioaddr->error_addr);
 	nsect = readw(ioaddr->nsect_addr);
@@ -243,7 +245,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 
 	qc = ata_qc_from_tag(ap, ap->link.active_tag);
 	if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
-		handled = ata_host_intr(ap, qc);
+		handled = ata_sff_host_intr(ap, qc);
 
 	/* We received an interrupt during a polled command,
 	 * or some other spurious condition.  Interrupt reporting
@@ -251,7 +253,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 	 * simply clear the interrupt
 	 */
 	if (unlikely(!handled))
-		ata_chk_status(ap);
+		ap->ops->sff_check_status(ap);
 }
 
 /*
@@ -300,46 +302,21 @@ out:
 
 
 static struct scsi_host_template vsc_sata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 
-static const struct ata_port_operations vsc_sata_ops = {
-	.tf_load		= vsc_sata_tf_load,
-	.tf_read		= vsc_sata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
+static struct ata_port_operations vsc_sata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	/* The IRQ handling is not quite standard SFF behaviour so we
+	   cannot use the default lost interrupt handler */
+	.lost_interrupt		= ATA_OP_NULL,
+	.sff_tf_load		= vsc_sata_tf_load,
+	.sff_tf_read		= vsc_sata_tf_read,
 	.freeze			= vsc_freeze,
 	.thaw			= vsc_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
 	.scr_read		= vsc_sata_scr_read,
 	.scr_write		= vsc_sata_scr_write,
-	.port_start		= ata_port_start,
 };
 
 static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
@@ -371,8 +348,8 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
 	static const struct ata_port_info pi = {
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO,
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &vsc_sata_ops,
 	};
@@ -422,10 +399,10 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.
 	 */
-	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (rc)
 		return rc;