X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fata%2Fsata_inic162x.c;h=fbbd87c96f102d9fc6c11abf5529bbd5d6eba67e;hb=371d3525e3b9d57c00ca307f8ee4ca51a2eaa70b;hp=1b10455e1ae01c704d4fcd21db84b6ed28a99e78;hpb=b0dd9b8ef985291a8b40118c5f33b7935e273dcb;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 1b10455..fbbd87c 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -10,13 +10,33 @@ * right. Documentation is available at initio's website but it only * documents registers (not programming model). * - * - ATA disks work. - * - Hotplug works. - * - ATAPI read works but burning doesn't. This thing is really - * peculiar about ATAPI and I couldn't figure out how ATAPI PIO and - * ATAPI DMA WRITE should be programmed. If you've got a clue, be - * my guest. - * - Both STR and STD work. + * This driver has interesting history. The first version was written + * from the documentation and a 2.4 IDE driver posted on a Taiwan + * company, which didn't use any IDMA features and couldn't handle + * LBA48. The resulting driver couldn't handle LBA48 devices either + * making it pretty useless. + * + * After a while, initio picked the driver up, renamed it to + * sata_initio162x, updated it to use IDMA for ATA DMA commands and + * posted it on their website. It only used ATA_PROT_DMA for IDMA and + * attaching both devices and issuing IDMA and !IDMA commands + * simultaneously broke it due to PIRQ masking interaction but it did + * show how to use the IDMA (ADMA + some initio specific twists) + * engine. + * + * Then, I picked up their changes again and here's the usable driver + * which uses IDMA for everything. Everything works now including + * LBA48, CD/DVD burning, suspend/resume and hotplug. There are some + * issues tho. Result Tf is not resported properly, NCQ isn't + * supported yet and CD/DVD writing works with DMA assisted PIO + * protocol (which, for native SATA devices, shouldn't cause any + * noticeable difference). + * + * Anyways, so, here's finally a working driver for inic162x. Enjoy! + * + * initio: If you guys wanna improve the driver regarding result TF + * access and other stuff, please feel free to contact me. I'll be + * happy to assist. */ #include @@ -28,13 +48,18 @@ #include #define DRV_NAME "sata_inic162x" -#define DRV_VERSION "0.3" +#define DRV_VERSION "0.4" enum { - MMIO_BAR = 5, + MMIO_BAR_PCI = 5, + MMIO_BAR_CARDBUS = 1, NR_PORTS = 2, + IDMA_CPB_TBL_SIZE = 4 * 32, + + INIC_DMA_BOUNDARY = 0xffffff, + HOST_ACTRL = 0x08, HOST_CTL = 0x7c, HOST_STAT = 0x7e, @@ -71,6 +96,7 @@ enum { PORT_SCR = 0x20, /* HOST_CTL bits */ + HCTL_LEDEN = (1 << 3), /* enable LED operation */ HCTL_IRQOFF = (1 << 8), /* global IRQ off */ HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */ HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/ @@ -97,9 +123,7 @@ enum { PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */ PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL, - - PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA, - PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE, + PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA, PIRQ_MASK_FREEZE = 0xff, /* PORT_PRD_CTL bits */ @@ -151,18 +175,65 @@ enum { PRD_END = (1 << 7), /* APRD chain end */ }; +/* Comman Parameter Block */ +struct inic_cpb { + u8 resp_flags; /* Response Flags */ + u8 error; /* ATA Error */ + u8 status; /* ATA Status */ + u8 ctl_flags; /* Control Flags */ + __le32 len; /* Total Transfer Length */ + __le32 prd; /* First PRD pointer */ + u8 rsvd[4]; + /* 16 bytes */ + u8 feature; /* ATA Feature */ + u8 hob_feature; /* ATA Ex. Feature */ + u8 device; /* ATA Device/Head */ + u8 mirctl; /* Mirror Control */ + u8 nsect; /* ATA Sector Count */ + u8 hob_nsect; /* ATA Ex. Sector Count */ + u8 lbal; /* ATA Sector Number */ + u8 hob_lbal; /* ATA Ex. Sector Number */ + u8 lbam; /* ATA Cylinder Low */ + u8 hob_lbam; /* ATA Ex. Cylinder Low */ + u8 lbah; /* ATA Cylinder High */ + u8 hob_lbah; /* ATA Ex. Cylinder High */ + u8 command; /* ATA Command */ + u8 ctl; /* ATA Control */ + u8 slave_error; /* Slave ATA Error */ + u8 slave_status; /* Slave ATA Status */ + /* 32 bytes */ +} __packed; + +/* Physical Region Descriptor */ +struct inic_prd { + __le32 mad; /* Physical Memory Address */ + __le16 len; /* Transfer Length */ + u8 rsvd; + u8 flags; /* Control Flags */ +} __packed; + +struct inic_pkt { + struct inic_cpb cpb; + struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */ + u8 cdb[ATAPI_CDB_LEN]; +} __packed; + struct inic_host_priv { + void __iomem *mmio_base; u16 cached_hctl; }; struct inic_port_priv { - u8 dfl_prdctl; - u8 cached_prdctl; - u8 cached_pirq_mask; + struct inic_pkt *pkt; + dma_addr_t pkt_dma; + u32 *cpb_tbl; + dma_addr_t cpb_tbl_dma; }; static struct scsi_host_template inic_sht = { - ATA_BMDMA_SHT(DRV_NAME), + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */ + .dma_boundary = INIC_DMA_BOUNDARY, }; static const int scr_map[] = { @@ -173,54 +244,34 @@ static const int scr_map[] = { static void __iomem *inic_port_base(struct ata_port *ap) { - return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE; -} - -static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask) -{ - void __iomem *port_base = inic_port_base(ap); - struct inic_port_priv *pp = ap->private_data; - - writeb(mask, port_base + PORT_IRQ_MASK); - pp->cached_pirq_mask = mask; -} - -static void inic_set_pirq_mask(struct ata_port *ap, u8 mask) -{ - struct inic_port_priv *pp = ap->private_data; + struct inic_host_priv *hpriv = ap->host->private_data; - if (pp->cached_pirq_mask != mask) - __inic_set_pirq_mask(ap, mask); + return hpriv->mmio_base + ap->port_no * PORT_SIZE; } static void inic_reset_port(void __iomem *port_base) { void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; - u16 ctl; - ctl = readw(idma_ctl); - ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO); + /* stop IDMA engine */ + readw(idma_ctl); /* flush */ + msleep(1); /* mask IRQ and assert reset */ - writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl); + writew(IDMA_CTL_RST_IDMA, idma_ctl); readw(idma_ctl); /* flush */ - - /* give it some time */ msleep(1); /* release reset */ - writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl); + writew(0, idma_ctl); /* clear irq */ writeb(0xff, port_base + PORT_IRQ_STAT); - - /* reenable ATA IRQ, turn off IDMA mode */ - writew(ctl, idma_ctl); } -static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val) +static int inic_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val) { - void __iomem *scr_addr = ap->ioaddr.scr_addr; + void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; void __iomem *addr; if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) @@ -235,9 +286,9 @@ static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val) return 0; } -static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) +static int inic_scr_write(struct ata_link *link, unsigned sc_reg, u32 val) { - void __iomem *scr_addr = ap->ioaddr.scr_addr; + void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) return -EINVAL; @@ -246,109 +297,117 @@ static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) return 0; } -/* - * In TF mode, inic162x is very similar to SFF device. TF registers - * function the same. DMA engine behaves similary using the same PRD - * format as BMDMA but different command register, interrupt and event - * notification methods are used. The following inic_bmdma_*() - * functions do the impedance matching. - */ -static void inic_bmdma_setup(struct ata_queued_cmd *qc) +static void inic_stop_idma(struct ata_port *ap) { - struct ata_port *ap = qc->ap; - struct inic_port_priv *pp = ap->private_data; void __iomem *port_base = inic_port_base(ap); - int rw = qc->tf.flags & ATA_TFLAG_WRITE; - - /* make sure device sees PRD table writes */ - wmb(); - - /* load transfer length */ - writel(qc->nbytes, port_base + PORT_PRD_XFERLEN); - /* turn on DMA and specify data direction */ - pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN; - if (!rw) - pp->cached_prdctl |= PRD_CTL_WR; - writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL); - - /* issue r/w command */ - ap->ops->sff_exec_command(ap, &qc->tf); + readb(port_base + PORT_RPQ_FIFO); + readb(port_base + PORT_RPQ_CNT); + writew(0, port_base + PORT_IDMA_CTL); } -static void inic_bmdma_start(struct ata_queued_cmd *qc) +static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat) { - struct ata_port *ap = qc->ap; + struct ata_eh_info *ehi = &ap->link.eh_info; struct inic_port_priv *pp = ap->private_data; - void __iomem *port_base = inic_port_base(ap); + struct inic_cpb *cpb = &pp->pkt->cpb; + bool freeze = false; - /* start host DMA transaction */ - pp->cached_prdctl |= PRD_CTL_START; - writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL); -} + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x", + irq_stat, idma_stat); -static void inic_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct inic_port_priv *pp = ap->private_data; - void __iomem *port_base = inic_port_base(ap); + inic_stop_idma(ap); - /* stop DMA engine */ - writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL); -} + if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) { + ata_ehi_push_desc(ehi, "hotplug"); + ata_ehi_hotplugged(ehi); + freeze = true; + } -static u8 inic_bmdma_status(struct ata_port *ap) -{ - /* event is already verified by the interrupt handler */ - return ATA_DMA_INTR; + if (idma_stat & IDMA_STAT_PERR) { + ata_ehi_push_desc(ehi, "PCI error"); + freeze = true; + } + + if (idma_stat & IDMA_STAT_CPBERR) { + ata_ehi_push_desc(ehi, "CPB error"); + + if (cpb->resp_flags & CPB_RESP_IGNORED) { + __ata_ehi_push_desc(ehi, " ignored"); + ehi->err_mask |= AC_ERR_INVALID; + freeze = true; + } + + if (cpb->resp_flags & CPB_RESP_ATA_ERR) + ehi->err_mask |= AC_ERR_DEV; + + if (cpb->resp_flags & CPB_RESP_SPURIOUS) { + __ata_ehi_push_desc(ehi, " spurious-intr"); + ehi->err_mask |= AC_ERR_HSM; + freeze = true; + } + + if (cpb->resp_flags & + (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) { + __ata_ehi_push_desc(ehi, " data-over/underflow"); + ehi->err_mask |= AC_ERR_HSM; + freeze = true; + } + } + + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); } static void inic_host_intr(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); - struct ata_eh_info *ehi = &ap->link.eh_info; + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); u8 irq_stat; + u16 idma_stat; - /* fetch and clear irq */ + /* read and clear IRQ status */ irq_stat = readb(port_base + PORT_IRQ_STAT); writeb(irq_stat, port_base + PORT_IRQ_STAT); + idma_stat = readw(port_base + PORT_IDMA_STAT); - if (likely(!(irq_stat & PIRQ_ERR))) { - struct ata_queued_cmd *qc = - ata_qc_from_tag(ap, ap->link.active_tag); + if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR))) + inic_host_err_intr(ap, irq_stat, idma_stat); - if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { - ap->ops->sff_check_status(ap); /* clear ATA interrupt */ - return; - } + if (unlikely(!qc)) + goto spurious; - if (likely(ata_sff_host_intr(ap, qc))) - return; + if (likely(idma_stat & IDMA_STAT_DONE)) { + inic_stop_idma(ap); - ap->ops->sff_check_status(ap); /* clear ATA interrupt */ - ata_port_printk(ap, KERN_WARNING, "unhandled " - "interrupt, irq_stat=%x\n", irq_stat); + /* Depending on circumstances, device error + * isn't reported by IDMA, check it explicitly. + */ + if (unlikely(readb(port_base + PORT_TF_COMMAND) & + (ATA_DF | ATA_ERR))) + qc->err_mask |= AC_ERR_DEV; + + ata_qc_complete(qc); return; } - /* error */ - ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat); - - if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) { - ata_ehi_hotplugged(ehi); - ata_port_freeze(ap); - } else - ata_port_abort(ap); + spurious: + ata_port_printk(ap, KERN_WARNING, "unhandled interrupt: " + "cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n", + qc ? qc->tf.command : 0xff, irq_stat, idma_stat); } static irqreturn_t inic_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; - void __iomem *mmio_base = host->iomap[MMIO_BAR]; + struct inic_host_priv *hpriv = host->private_data; u16 host_irq_stat; int i, handled = 0;; - host_irq_stat = readw(mmio_base + HOST_IRQ_STAT); + host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT); if (unlikely(!(host_irq_stat & HIRQ_GLOBAL))) goto out; @@ -378,45 +437,157 @@ static irqreturn_t inic_interrupt(int irq, void *dev_instance) return IRQ_RETVAL(handled); } +static int inic_check_atapi_dma(struct ata_queued_cmd *qc) +{ + /* For some reason ATAPI_PROT_DMA doesn't work for some + * commands including writes and other misc ops. Use PIO + * protocol instead, which BTW is driven by the DMA engine + * anyway, so it shouldn't make much difference for native + * SATA devices. + */ + if (atapi_cmd_type(qc->cdb[0]) == READ) + return 0; + return 1; +} + +static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + unsigned int si; + u8 flags = 0; + + if (qc->tf.flags & ATA_TFLAG_WRITE) + flags |= PRD_WRITE; + + if (ata_is_dma(qc->tf.protocol)) + flags |= PRD_DMA; + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + prd->mad = cpu_to_le32(sg_dma_address(sg)); + prd->len = cpu_to_le16(sg_dma_len(sg)); + prd->flags = flags; + prd++; + } + + WARN_ON(!si); + prd[-1].flags |= PRD_END; +} + +static void inic_qc_prep(struct ata_queued_cmd *qc) +{ + struct inic_port_priv *pp = qc->ap->private_data; + struct inic_pkt *pkt = pp->pkt; + struct inic_cpb *cpb = &pkt->cpb; + struct inic_prd *prd = pkt->prd; + bool is_atapi = ata_is_atapi(qc->tf.protocol); + bool is_data = ata_is_data(qc->tf.protocol); + unsigned int cdb_len = 0; + + VPRINTK("ENTER\n"); + + if (is_atapi) + cdb_len = qc->dev->cdb_len; + + /* prepare packet, based on initio driver */ + memset(pkt, 0, sizeof(struct inic_pkt)); + + cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN; + if (is_atapi || is_data) + cpb->ctl_flags |= CPB_CTL_DATA; + + cpb->len = cpu_to_le32(qc->nbytes + cdb_len); + cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd)); + + cpb->device = qc->tf.device; + cpb->feature = qc->tf.feature; + cpb->nsect = qc->tf.nsect; + cpb->lbal = qc->tf.lbal; + cpb->lbam = qc->tf.lbam; + cpb->lbah = qc->tf.lbah; + + if (qc->tf.flags & ATA_TFLAG_LBA48) { + cpb->hob_feature = qc->tf.hob_feature; + cpb->hob_nsect = qc->tf.hob_nsect; + cpb->hob_lbal = qc->tf.hob_lbal; + cpb->hob_lbam = qc->tf.hob_lbam; + cpb->hob_lbah = qc->tf.hob_lbah; + } + + cpb->command = qc->tf.command; + /* don't load ctl - dunno why. it's like that in the initio driver */ + + /* setup PRD for CDB */ + if (is_atapi) { + memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN); + prd->mad = cpu_to_le32(pp->pkt_dma + + offsetof(struct inic_pkt, cdb)); + prd->len = cpu_to_le16(cdb_len); + prd->flags = PRD_CDB | PRD_WRITE; + if (!is_data) + prd->flags |= PRD_END; + prd++; + } + + /* setup sg table */ + if (is_data) + inic_fill_sg(prd, qc); + + pp->cpb_tbl[0] = pp->pkt_dma; +} + static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + void __iomem *port_base = inic_port_base(ap); - /* ATA IRQ doesn't wait for DMA transfer completion and vice - * versa. Mask IRQ selectively to detect command completion. - * Without it, ATA DMA read command can cause data corruption. - * - * Something similar might be needed for ATAPI writes. I - * tried a lot of combinations but couldn't find the solution. - */ - if (qc->tf.protocol == ATA_PROT_DMA && - !(qc->tf.flags & ATA_TFLAG_WRITE)) - inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ); - else - inic_set_pirq_mask(ap, PIRQ_MASK_OTHER); + /* fire up the ADMA engine */ + writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL); + writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL); + writeb(0, port_base + PORT_CPB_PTQFIFO); + + return 0; +} + +static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + void __iomem *port_base = inic_port_base(ap); - /* Issuing a command to yet uninitialized port locks up the - * controller. Most of the time, this happens for the first - * command after reset which are ATA and ATAPI IDENTIFYs. - * Fast fail if stat is 0x7f or 0xff for those commands. + tf->feature = readb(port_base + PORT_TF_FEATURE); + tf->nsect = readb(port_base + PORT_TF_NSECT); + tf->lbal = readb(port_base + PORT_TF_LBAL); + tf->lbam = readb(port_base + PORT_TF_LBAM); + tf->lbah = readb(port_base + PORT_TF_LBAH); + tf->device = readb(port_base + PORT_TF_DEVICE); + tf->command = readb(port_base + PORT_TF_COMMAND); +} + +static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *rtf = &qc->result_tf; + struct ata_taskfile tf; + + /* FIXME: Except for status and error, result TF access + * doesn't work. I tried reading from BAR0/2, CPB and BAR5. + * None works regardless of which command interface is used. + * For now return true iff status indicates device error. + * This means that we're reporting bogus sector for RW + * failures. Eeekk.... */ - if (unlikely(qc->tf.command == ATA_CMD_ID_ATA || - qc->tf.command == ATA_CMD_ID_ATAPI)) { - u8 stat = ap->ops->sff_check_status(ap); - if (stat == 0x7f || stat == 0xff) - return AC_ERR_HSM; - } + inic_tf_read(qc->ap, &tf); - return ata_sff_qc_issue(qc); + if (!(tf.command & ATA_ERR)) + return false; + + rtf->command = tf.command; + rtf->feature = tf.feature; + return true; } static void inic_freeze(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); - __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE); - - ap->ops->sff_check_status(ap); + writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK); writeb(0xff, port_base + PORT_IRQ_STAT); } @@ -424,10 +595,15 @@ static void inic_thaw(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); - ap->ops->sff_check_status(ap); writeb(0xff, port_base + PORT_IRQ_STAT); + writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK); +} + +static int inic_check_ready(struct ata_link *link) +{ + void __iomem *port_base = inic_port_base(link->ap); - __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER); + return ata_check_ready(readb(port_base + PORT_TF_COMMAND)); } /* @@ -441,17 +617,15 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, void __iomem *port_base = inic_port_base(ap); void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); - u16 val; int rc; /* hammer it into sane state */ inic_reset_port(port_base); - val = readw(idma_ctl); - writew(val | IDMA_CTL_RST_ATA, idma_ctl); + writew(IDMA_CTL_RST_ATA, idma_ctl); readw(idma_ctl); /* flush */ msleep(1); - writew(val & ~IDMA_CTL_RST_ATA, idma_ctl); + writew(0, idma_ctl); rc = sata_link_resume(link, timing, deadline); if (rc) { @@ -465,7 +639,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, struct ata_taskfile tf; /* wait for link to become ready */ - rc = ata_sff_wait_after_reset(link, 1, deadline); + rc = ata_wait_after_reset(link, deadline, inic_check_ready); /* link occupied, -ENODEV too is an error */ if (rc) { ata_link_printk(link, KERN_WARNING, "device not ready " @@ -473,7 +647,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, return rc; } - ata_sff_tf_read(ap, &tf); + inic_tf_read(ap, &tf); *class = ata_dev_classify(&tf); } @@ -483,18 +657,8 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, static void inic_error_handler(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); - struct inic_port_priv *pp = ap->private_data; - unsigned long flags; - /* reset PIO HSM and stop DMA engine */ inic_reset_port(port_base); - - spin_lock_irqsave(ap->lock, flags); - ap->hsm_task_state = HSM_ST_IDLE; - writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL); - spin_unlock_irqrestore(ap->lock, flags); - - /* PIO and DMA engines have been stopped, perform recovery */ ata_std_error_handler(ap); } @@ -505,26 +669,18 @@ static void inic_post_internal_cmd(struct ata_queued_cmd *qc) inic_reset_port(inic_port_base(qc->ap)); } -static void inic_dev_config(struct ata_device *dev) -{ - /* inic can only handle upto LBA28 max sectors */ - if (dev->max_sectors > ATA_MAX_SECTORS) - dev->max_sectors = ATA_MAX_SECTORS; - - if (dev->n_sectors >= 1 << 28) { - ata_dev_printk(dev, KERN_ERR, - "ERROR: This driver doesn't support LBA48 yet and may cause\n" - " data corruption on such devices. Disabling.\n"); - ata_dev_disable(dev); - } -} - static void init_port(struct ata_port *ap) { void __iomem *port_base = inic_port_base(ap); + struct inic_port_priv *pp = ap->private_data; - /* Setup PRD address */ + /* clear packet and CPB table */ + memset(pp->pkt, 0, sizeof(struct inic_pkt)); + memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE); + + /* setup PRD and CPB lookup table addresses */ writel(ap->prd_dma, port_base + PORT_PRD_ADDR); + writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR); } static int inic_port_resume(struct ata_port *ap) @@ -535,48 +691,49 @@ static int inic_port_resume(struct ata_port *ap) static int inic_port_start(struct ata_port *ap) { - void __iomem *port_base = inic_port_base(ap); + struct device *dev = ap->host->dev; struct inic_port_priv *pp; - u8 tmp; int rc; /* alloc and initialize private data */ - pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL); + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); if (!pp) return -ENOMEM; ap->private_data = pp; - /* default PRD_CTL value, DMAEN, WR and START off */ - tmp = readb(port_base + PORT_PRD_CTL); - tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START); - pp->dfl_prdctl = tmp; - /* Alloc resources */ rc = ata_port_start(ap); if (rc) return rc; + pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt), + &pp->pkt_dma, GFP_KERNEL); + if (!pp->pkt) + return -ENOMEM; + + pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE, + &pp->cpb_tbl_dma, GFP_KERNEL); + if (!pp->cpb_tbl) + return -ENOMEM; + init_port(ap); return 0; } static struct ata_port_operations inic_port_ops = { - .inherits = &ata_sff_port_ops, + .inherits = &sata_port_ops, - .bmdma_setup = inic_bmdma_setup, - .bmdma_start = inic_bmdma_start, - .bmdma_stop = inic_bmdma_stop, - .bmdma_status = inic_bmdma_status, + .check_atapi_dma = inic_check_atapi_dma, + .qc_prep = inic_qc_prep, .qc_issue = inic_qc_issue, + .qc_fill_rtf = inic_qc_fill_rtf, .freeze = inic_freeze, .thaw = inic_thaw, - .softreset = ATA_OP_NULL, /* softreset is broken */ .hardreset = inic_hardreset, .error_handler = inic_error_handler, .post_internal_cmd = inic_post_internal_cmd, - .dev_config = inic_dev_config, .scr_read = inic_scr_read, .scr_write = inic_scr_write, @@ -586,12 +743,6 @@ static struct ata_port_operations inic_port_ops = { }; static struct ata_port_info inic_port_info = { - /* For some reason, ATAPI_PROT_PIO is broken on this - * controller, and no, PIO_POLLING does't fix it. It somehow - * manages to report the wrong ireason and ignoring ireason - * results in machine lock up. Tell libata to always prefer - * DMA. - */ .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -644,7 +795,6 @@ static int inic_pci_device_resume(struct pci_dev *pdev) { struct ata_host *host = dev_get_drvdata(&pdev->dev); struct inic_host_priv *hpriv = host->private_data; - void __iomem *mmio_base = host->iomap[MMIO_BAR]; int rc; rc = ata_pci_device_do_resume(pdev); @@ -652,7 +802,7 @@ static int inic_pci_device_resume(struct pci_dev *pdev) return rc; if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { - rc = init_controller(mmio_base, hpriv->cached_hctl); + rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); if (rc) return rc; } @@ -670,6 +820,7 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_host *host; struct inic_host_priv *hpriv; void __iomem * const *iomap; + int mmio_bar; int i, rc; if (!printed_version++) @@ -683,38 +834,31 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->private_data = hpriv; - /* acquire resources and fill host */ + /* Acquire resources and fill host. Note that PCI and cardbus + * use different BARs. + */ rc = pcim_enable_device(pdev); if (rc) return rc; - rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME); + if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM) + mmio_bar = MMIO_BAR_PCI; + else + mmio_bar = MMIO_BAR_CARDBUS; + + rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME); if (rc) return rc; host->iomap = iomap = pcim_iomap_table(pdev); + hpriv->mmio_base = iomap[mmio_bar]; + hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL); for (i = 0; i < NR_PORTS; i++) { struct ata_port *ap = host->ports[i]; - struct ata_ioports *port = &ap->ioaddr; - unsigned int offset = i * PORT_SIZE; - - port->cmd_addr = iomap[2 * i]; - port->altstatus_addr = - port->ctl_addr = (void __iomem *) - ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS); - port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR; - - ata_sff_std_ports(port); - - ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio"); - ata_port_pbar_desc(ap, MMIO_BAR, offset, "port"); - ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", - (unsigned long long)pci_resource_start(pdev, 2 * i), - (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) | - ATA_PCI_CTL_OFS); - } - hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL); + ata_port_pbar_desc(ap, mmio_bar, -1, "mmio"); + ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port"); + } /* Set dma_mask. This devices doesn't support 64bit addressing. */ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); @@ -743,7 +887,7 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } - rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl); + rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); if (rc) { dev_printk(KERN_ERR, &pdev->dev, "failed to initialize controller\n");