X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_pcmcia.c;h=f4d009ed50aceb10b04e49b6ec9a9c7f1dff6cf6;hb=ed40d0c472b136682b2fcba05f89762859c7374f;hp=3ce33bfdccccf991346f84544d371837c218d499;hpb=0517793fa8f98e6f30406b1811ea0312bca3a414;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 3ce33bf..f4d009e 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -1,6 +1,6 @@ /* * pata_pcmcia.c - PCMCIA PATA controller driver. - * Copyright 2005-2006 Red Hat Inc , all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz * * @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.2.11" +#define DRV_VERSION "0.3.5" /* * Private data structure to glue stuff together @@ -54,53 +54,190 @@ struct ata_pcmcia_info { dev_node_t node; }; -static struct scsi_host_template pcmcia_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; +/** + * pcmcia_set_mode - PCMCIA specific mode setup + * @link: link + * @r_failed_dev: Return pointer for failed device + * + * Perform the tuning and setup of the devices and timings, which + * for PCMCIA is the same as any other controller. We wrap it however + * as we need to spot hardware with incorrect or missing master/slave + * decode, which alas is embarrassingly common in the PC world + */ -static struct ata_port_operations pcmcia_port_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, +static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) +{ + struct ata_device *master = &link->device[0]; + struct ata_device *slave = &link->device[1]; + + if (!ata_dev_enabled(master) || !ata_dev_enabled(slave)) + return ata_do_set_mode(link, r_failed_dev); + + if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV, + ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) { + /* Suspicious match, but could be two cards from + the same vendor - check serial */ + if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO, + ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) { + ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n"); + ata_dev_disable(slave); + } + } + return ata_do_set_mode(link, r_failed_dev); +} + +/** + * pcmcia_set_mode_8bit - PCMCIA specific mode setup + * @link: link + * @r_failed_dev: Return pointer for failed device + * + * For the simple emulated 8bit stuff the less we do the better. + */ + +static int pcmcia_set_mode_8bit(struct ata_link *link, + struct ata_device **r_failed_dev) +{ + return 0; +} + +/** + * ata_data_xfer_8bit - Transfer data by 8bit PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by 8 bit PIO. + * + * LOCKING: + * Inherited from caller. + */ + +static unsigned int ata_data_xfer_8bit(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + + if (rw == READ) + ioread8_rep(ap->ioaddr.data_addr, buf, buflen); + else + iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); + + return buflen; +} + +/** + * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is neccessary before a + * reset will recover the device. + * + */ + +void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count++ < 65536;) + ioread8(ap->ioaddr.data_addr); - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, + if (count) + ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n", + count); - .data_xfer = ata_pio_data_xfer_noirq, +} - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, +static struct scsi_host_template pcmcia_sht = { + ATA_PIO_SHT(DRV_NAME), +}; - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop +static struct ata_port_operations pcmcia_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .cable_detect = ata_cable_40wire, + .set_mode = pcmcia_set_mode, +}; + +static struct ata_port_operations pcmcia_8bit_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_data_xfer_8bit, + .cable_detect = ata_cable_40wire, + .set_mode = pcmcia_set_mode_8bit, + .drain_fifo = pcmcia_8bit_drain_fifo, }; #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +struct pcmcia_config_check { + unsigned long ctl_base; + int skip_vcc; + int is_kme; +}; + +static int pcmcia_check_one_config(struct pcmcia_device *pdev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + struct pcmcia_config_check *stk = priv_data; + + /* Check for matching Vcc, unless we're desperate */ + if (!stk->skip_vcc) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + pdev->io.BasePort1 = io->win[0].base; + pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (!(io->flags & CISTPL_IO_16BIT)) + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + if (io->nwin == 2) { + pdev->io.NumPorts1 = 8; + pdev->io.BasePort2 = io->win[1].base; + pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + return -ENODEV; + stk->ctl_base = pdev->io.BasePort2; + } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { + pdev->io.NumPorts1 = io->win[0].len; + pdev->io.NumPorts2 = 0; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + return -ENODEV; + stk->ctl_base = pdev->io.BasePort1 + 0x0e; + } else + return -ENODEV; + /* If we've got this far, we're done */ + return 0; + } + return -ENODEV; +} + /** * pcmcia_init_one - attach a PCMCIA interface * @pdev: pcmcia device @@ -111,18 +248,15 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) static int pcmcia_init_one(struct pcmcia_device *pdev) { - struct ata_probe_ent ae; + struct ata_host *host; + struct ata_port *ap; struct ata_pcmcia_info *info; - tuple_t tuple; - struct { - unsigned short buf[128]; - cisparse_t parse; - config_info_t conf; - cistpl_cftable_entry_t dflt; - } *stk = NULL; - cistpl_cftable_entry_t *cfg; - int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM; + struct pcmcia_config_check *stk = NULL; + int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; + void __iomem *io_addr, *ctl_addr; + int n_ports = 1; + struct ata_port_operations *ops = &pcmcia_port_ops; info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) @@ -141,136 +275,76 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) pdev->conf.Attributes = CONF_ENABLE_IRQ; pdev->conf.IntType = INT_MEMORY_AND_IO; + /* See if we have a manufacturer identifier. Use it to set is_kme for + vendor quirks */ + is_kme = ((pdev->manf_id == MANFID_KME) && + ((pdev->card_id == PRODID_KME_KXLC005_A) || + (pdev->card_id == PRODID_KME_KXLC005_B))); + /* Allocate resoure probing structures */ stk = kzalloc(sizeof(*stk), GFP_KERNEL); if (!stk) goto out1; + stk->is_kme = is_kme; + stk->skip_vcc = io_base = ctl_base = 0; - cfg = &stk->parse.cftable_entry; - - /* Tuples we are walking */ - tuple.TupleData = (cisdata_t *)&stk->buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CONFIG; - - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(pdev, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(pdev, &tuple, &stk->parse)); - pdev->conf.ConfigBase = stk->parse.config.base; - pdev->conf.Present = stk->parse.config.rmask[0]; - - /* See if we have a manufacturer identifier. Use it to set is_kme for - vendor quirks */ - tuple.DesiredTuple = CISTPL_MANFID; - if (!pcmcia_get_first_tuple(pdev, &tuple) && !pcmcia_get_tuple_data(pdev, &tuple) && !pcmcia_parse_tuple(pdev, &tuple, &stk->parse)) - is_kme = ((stk->parse.manfid.manf == MANFID_KME) && ((stk->parse.manfid.card == PRODID_KME_KXLC005_A) || (stk->parse.manfid.card == PRODID_KME_KXLC005_B))); - - /* Not sure if this is right... look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf)); -/* link->conf.Vcc = stk->conf.Vcc; */ - - pass = io_base = ctl_base = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); - - /* Now munch the resources looking for a suitable set */ - while (1) { - if (pcmcia_get_tuple_data(pdev, &tuple) != 0) - goto next_entry; - if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0) - goto next_entry; - /* Check for matching Vcc, unless we're desperate */ - if (!pass) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io; - pdev->conf.ConfigIndex = cfg->index; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - goto next_entry; - io_base = pdev->io.BasePort1; - ctl_base = pdev->io.BasePort2; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - goto next_entry; - io_base = pdev->io.BasePort1; - ctl_base = pdev->io.BasePort1 + 0x0e; - } else goto next_entry; - /* If we've got this far, we're done */ - break; - } -next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); - if (pass) { - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple)); - } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) { - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); - memset(&stk->dflt, 0, sizeof(stk->dflt)); - pass++; - } + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) { + stk->skip_vcc = 1; + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) + goto failed; /* No suitable config found */ } - + io_base = pdev->io.BasePort1; + ctl_base = stk->ctl_base; CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf)); + /* iomap */ + ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io_base, 8); + ctl_addr = devm_ioport_map(&pdev->dev, ctl_base, 1); + if (!io_addr || !ctl_addr) + goto failed; + /* Success. Disable the IRQ nIEN line, do quirks */ - outb(0x02, ctl_base); + iowrite8(0x02, ctl_addr); if (is_kme) - outb(0x81, ctl_base + 0x01); + iowrite8(0x81, ctl_addr + 0x01); /* FIXME: Could be more ports at base + 0x10 but we only deal with one right now */ if (pdev->io.NumPorts1 >= 0x20) - printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n"); + n_ports = 2; + if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) + ops = &pcmcia_8bit_port_ops; /* - * Having done the PCMCIA plumbing the ATA side is relatively - * sane. + * Having done the PCMCIA plumbing the ATA side is relatively + * sane. */ + ret = -ENOMEM; + host = ata_host_alloc(&pdev->dev, n_ports); + if (!host) + goto failed; + + for (p = 0; p < n_ports; p++) { + ap = host->ports[p]; + + ap->ops = ops; + ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */ + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->ioaddr.cmd_addr = io_addr + 0x10 * p; + ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; + ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p; + ata_sff_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + } - memset(&ae, 0, sizeof(struct ata_probe_ent)); - INIT_LIST_HEAD(&ae.node); - ae.dev = &pdev->dev; - ae.port_ops = &pcmcia_port_ops; - ae.sht = &pcmcia_sht; - ae.n_ports = 1; - ae.pio_mask = 1; /* ISA so PIO 0 cycles */ - ae.irq = pdev->irq.AssignedIRQ; - ae.irq_flags = SA_SHIRQ; - ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; - ae.port[0].cmd_addr = io_base; - ae.port[0].altstatus_addr = ctl_base; - ae.port[0].ctl_addr = ctl_base; - ata_std_ports(&ae.port[0]); - - if (ata_device_add(&ae) == 0) + /* activate */ + ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt, + IRQF_SHARED, &pcmcia_sht); + if (ret) goto failed; info->ndev = 1; @@ -305,8 +379,7 @@ static void pcmcia_remove_one(struct pcmcia_device *pdev) /* If we have attached the device to the ATA layer, detach it */ if (info->ndev) { struct ata_host *host = dev_get_drvdata(dev); - ata_host_remove(host); - dev_set_drvdata(dev, NULL); + ata_host_detach(host); } info->ndev = 0; pdev->priv = NULL; @@ -317,15 +390,22 @@ static void pcmcia_remove_one(struct pcmcia_device *pdev) static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_FUNC_ID(4), + PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */ + PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), - PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), + PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), + PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ + PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ - PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), - PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar */ + PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */ + PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */ PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0), PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74), PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), @@ -340,12 +420,15 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), + PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), @@ -356,13 +439,16 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), PCMCIA_DEVICE_NULL, };