X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_optidma.c;h=76b7d12b1e8d37ed78d7196f854b8ec240780a15;hb=1d3a8118b049252a84641b6643066bda0da0d316;hp=f9b485a487ae75c7da9ed0097e241a898154df81;hpb=b447916e2b8c80f37aa88512ea39a05d5d11507d;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index f9b485a..76b7d12 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -1,7 +1,6 @@
 /*
  * pata_optidma.c 	- Opti DMA PATA for new ATA layer
  *			  (C) 2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *	The Opti DMA controllers are related to the older PIO PCI controllers
  *	and indeed the VLB ones. The main differences are that the timing
@@ -64,22 +63,7 @@ static int optidma_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
-}
-
-/**
- *	optidma_probe_reset		-	probe reset
- *	@ap: ATA port
- *
- *	Perform the ATA probe and bus reset sequence plus specific handling
- *	for this hardware. The Opti needs little handling - we have no UDMA66
- *	capability that needs cable detection. All we must do is check the port
- *	is enabled.
- */
-
-static void optidma_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, optidma_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -350,89 +334,22 @@ static int optidma_set_mode(struct ata_link *link, struct ata_device **r_failed)
 }
 
 static struct scsi_host_template optidma_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations optidma_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= optidma_set_pio_mode,
 	.set_dmamode	= optidma_set_dma_mode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.error_handler	= optidma_error_handler,
 	.set_mode	= optidma_set_mode,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.prereset	= optidma_pre_reset,
 };
 
 static struct ata_port_operations optiplus_port_ops = {
+	.inherits	= &optidma_port_ops,
 	.set_piomode	= optiplus_set_pio_mode,
 	.set_dmamode	= optiplus_set_dma_mode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.error_handler	= optidma_error_handler,
-	.set_mode	= optidma_set_mode,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
@@ -481,26 +398,29 @@ done_nomsg:		/* Wrong chip revision */
 static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_82c700 = {
-		.sht = &optidma_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &optidma_port_ops
 	};
 	static const struct ata_port_info info_82c700_udma = {
-		.sht = &optidma_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &optiplus_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info_82c700, NULL };
 	static int printed_version;
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
+	rc = pcim_enable_device(dev);
+	if (rc)
+		return rc;
+
 	/* Fixed location chipset magic */
 	inw(0x1F1);
 	inw(0x1F1);
@@ -509,7 +429,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (optiplus_with_udma(dev))
 		ppi[0] = &info_82c700_udma;
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0);
 }
 
 static const struct pci_device_id optidma[] = {