X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_it8213.c;h=c113d7c079c8c6cd03615335d7818ef760e83c06;hb=02582b92f60fa33b68b90263013e98550286db0a;hp=bf3aaa205edcf443d532901e04a983ce3cfb2241;hpb=9666f4009c22f6520ac3fb8a19c9e32ab973e828;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index bf3aaa2..c113d7c 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -19,40 +19,28 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_it8213"
-#define DRV_VERSION	"0.0.2"
+#define DRV_VERSION	"0.0.3"
 
 /**
  *	it8213_pre_reset	-	check for 40/80 pin
- *	@ap: Port
+ *	@link: link
  *	@deadline: deadline jiffies for the operation
  *
  *	Filter out ports by the enable bits before doing the normal reset
  *	and probe.
  */
 
-static int it8213_pre_reset(struct ata_port *ap, unsigned long deadline)
+static int it8213_pre_reset(struct ata_link *link, unsigned long deadline)
 {
 	static const struct pci_bits it8213_enable_bits[] = {
 		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
 	};
+	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(ap, deadline);
-}
-
-/**
- *	it8213_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void it8213_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -127,7 +115,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		idetm_data &= 0xCC0F;
 		idetm_data |= (control << 4);
 
-		/* Slave timing in seperate register */
+		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0xF0;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
@@ -242,55 +230,16 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template it8213_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations it8213_ops = {
-	.port_disable		= ata_port_disable,
+
+static struct ata_port_operations it8213_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= it8213_cable_detect,
 	.set_piomode		= it8213_set_piomode,
 	.set_dmamode		= it8213_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= it8213_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= it8213_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
-
-	.port_start		= ata_port_start,
+	.prereset		= it8213_pre_reset,
 };
 
 
@@ -311,22 +260,21 @@ static const struct ata_port_operations it8213_ops = {
 static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	static struct ata_port_info info = {
-		.sht		= &it8213_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	static const struct ata_port_info info = {
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask 	= 0x1f, /* UDMA 100 */
+		.udma_mask 	= ATA_UDMA4, /* FIXME: want UDMA 100? */
 		.port_ops	= &it8213_ops,
 	};
-	static struct ata_port_info *port_info[2] = { &info, &info };
+	/* Current IT8213 stuff is single port */
+	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	/* Current IT8213 stuff is single port */
-	return ata_pci_init_one(pdev, port_info, 1);
+	return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL);
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {