X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_hpt3x2n.c;h=d30da8072091843c3388ff4a329d098e59e64b43;hb=940a68de56c1952c29d9f3c1a769a82b1bdd2b67;hp=aa29cde09f8bbd594022f23a1e7803b6adfc5d87;hpb=bf6263a853c9c143bf03f0a6fdcc68ab714fb5f5;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index aa29cde..d30da80 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2006 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2007 MontaVista Software, Inc. * * * TODO @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.7" enum { HPT_PCI_FAST = (1 << 31), @@ -128,12 +128,15 @@ static int hpt3x2n_cable_detect(struct ata_port *ap) pci_read_config_byte(pdev, 0x5B, &scr2); pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01); + + udelay(10); /* debounce */ + /* Cable register now active */ pci_read_config_byte(pdev, 0x5A, &ata66); /* Restore state */ pci_write_config_byte(pdev, 0x5B, scr2); - if (ata66 & (1 << ap->port_no)) + if (ata66 & (2 >> ap->port_no)) return ATA_CBL_PATA40; else return ATA_CBL_PATA80; @@ -141,33 +144,22 @@ static int hpt3x2n_cable_detect(struct ata_port *ap) /** * hpt3x2n_pre_reset - reset the hpt3x2n bus - * @ap: ATA port to reset + * @link: ATA link to reset * @deadline: deadline jiffies for the operation * * Perform the initial reset handling for the 3x2n series controllers. * Reset the hardware and state machine, */ -static int hpt3xn_pre_reset(struct ata_port *ap, unsigned long deadline) +static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline) { + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); /* Reset the state machine */ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(ap, deadline); -} - -/** - * hpt3x2n_error_handler - probe the hpt3x2n bus - * @ap: ATA port to reset - * - * Perform the probe reset handling for the 3x2N - */ - -static void hpt3x2n_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset); + return ata_sff_prereset(link, deadline); } /** @@ -196,9 +188,8 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_read_config_dword(pdev, addr1, ®); mode = hpt3x2n_find_mode(ap, adev->pio_mode); - mode &= ~0x8000000; /* No FIFO in PIO */ - mode &= ~0x30070000; /* Leave config bits alone */ - reg &= 0x30070000; /* Strip timing bits */ + mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ + reg &= ~0xCFC3FFFF; /* Strip timing bits */ pci_write_config_dword(pdev, addr1, reg | mode); } @@ -215,8 +206,7 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 addr1, addr2; - u32 reg; - u32 mode; + u32 reg, mode, mask; u8 fast; addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); @@ -227,11 +217,12 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) fast &= ~0x07; pci_write_config_byte(pdev, addr2, fast); + mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; + pci_read_config_dword(pdev, addr1, ®); mode = hpt3x2n_find_mode(ap, adev->dma_mode); - mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ - mode &= ~0xC0000000; /* Leave config bits alone */ - reg &= 0xC0000000; /* Strip timing bits */ + mode &= mask; + reg &= ~mask; pci_write_config_dword(pdev, addr1, reg | mode); } @@ -319,7 +310,7 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing) return 0; } -static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc) { struct ata_taskfile *tf = &qc->tf; struct ata_port *ap = qc->ap; @@ -334,25 +325,11 @@ static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc) hpt3x2n_set_clock(ap, 0x23); } } - return ata_qc_issue_prot(qc); + return ata_sff_qc_issue(qc); } static struct scsi_host_template hpt3x2n_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, + ATA_BMDMA_SHT(DRV_NAME), }; /* @@ -360,39 +337,15 @@ static struct scsi_host_template hpt3x2n_sht = { */ static struct ata_port_operations hpt3x2n_port_ops = { - .port_disable = ata_port_disable, - .set_piomode = hpt3x2n_set_piomode, - .set_dmamode = hpt3x2n_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = hpt3x2n_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = hpt3x2n_cable_detect, + .inherits = &ata_bmdma_port_ops, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, .bmdma_stop = hpt3x2n_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = hpt3x2n_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, + .qc_issue = hpt3x2n_qc_issue, - .port_start = ata_port_start, + .cable_detect = hpt3x2n_cable_detect, + .set_piomode = hpt3x2n_set_piomode, + .set_dmamode = hpt3x2n_set_dmamode, + .prereset = hpt3x2n_pre_reset, }; /** @@ -489,44 +442,43 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT372N and friends - UDMA133 */ static const struct ata_port_info info = { - .sht = &hpt3x2n_sht, .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &hpt3x2n_port_ops }; - struct ata_port_info port = info; - const struct ata_port_info *ppi[] = { &port, NULL }; - + const struct ata_port_info *ppi[] = { &info, NULL }; + u8 rev = dev->revision; u8 irqmask; - u32 class_rev; - unsigned int pci_mhz; unsigned int f_low, f_high; int adjust; unsigned long iobase = pci_resource_start(dev, 4); + void *hpriv = NULL; + int rc; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xFF; + rc = pcim_enable_device(dev); + if (rc) + return rc; switch(dev->device) { case PCI_DEVICE_ID_TTI_HPT366: - if (class_rev < 6) + if (rev < 6) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT371: - if (class_rev < 2) + if (rev < 2) return -ENODEV; /* 371N if rev > 1 */ break; case PCI_DEVICE_ID_TTI_HPT372: /* 372N if rev >= 2*/ - if (class_rev < 2) + if (rev < 2) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT302: - if (class_rev < 2) + if (rev < 2) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT372N: @@ -579,15 +531,16 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); } if (adjust == 8) { - printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n"); + printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n"); return -ENODEV; } + printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n", + pci_mhz); /* Set our private data up. We only need a few flags so we use it directly */ - port.private_data = NULL; if (pci_mhz > 60) { - port.private_data = (void *)PCI66; + hpriv = (void *)PCI66; /* * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in * the MISC. register to stretch the UltraDMA Tss timing. @@ -598,7 +551,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) } /* Now kick off ATA set up */ - return ata_pci_init_one(dev, ppi); + return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv); } static const struct pci_device_id hpt3x2n[] = {