X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fata%2Flibata-core.c;h=004dae4ea5bc63afaa255698bdf6528bba356235;hb=11e0704b7ec3abfeaee7e3a56f11c82024d1ae01;hp=519ce586bd13a15244e47c897758ad6142350d17;hpb=954bb005c9d5368188ef03ff1d723ff3c0e8ae99;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 519ce58..004dae4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -30,6 +30,14 @@ * Hardware documentation available from http://www.t13.org/ and * http://www.sata-io.org/ * + * Standards documents from: + * http://www.t13.org (ATA standards, PCI DMA IDE spec) + * http://www.t10.org (SCSI MMC - for ATAPI MMC) + * http://www.sata-io.org (SATA) + * http://www.compactflash.org (CF) + * http://www.qic.org (QIC157 - Tape and DSC) + * http://www.ce-ata.org (CE-ATA: not supported) + * */ #include @@ -49,13 +57,14 @@ #include #include #include +#include #include #include #include #include -#include #include #include +#include #include "libata.h" @@ -68,7 +77,8 @@ const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); -static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable); +static unsigned int ata_dev_set_feature(struct ata_device *dev, + u8 enable, u8 feature); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); @@ -93,7 +103,7 @@ int libata_fua = 0; module_param_named(fua, libata_fua, int, 0444); MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); -static int ata_ignore_hpa = 0; +static int ata_ignore_hpa; module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)"); @@ -109,6 +119,10 @@ int libata_noacpi = 0; module_param_named(noacpi, libata_noacpi, int, 0444); MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set"); +int libata_allow_tpm = 0; +module_param_named(allow_tpm, libata_allow_tpm, int, 0444); +MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); @@ -440,9 +454,9 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, * RETURNS: * Packed xfer_mask. */ -static unsigned int ata_pack_xfermask(unsigned int pio_mask, - unsigned int mwdma_mask, - unsigned int udma_mask) +unsigned long ata_pack_xfermask(unsigned long pio_mask, + unsigned long mwdma_mask, + unsigned long udma_mask) { return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | @@ -459,10 +473,8 @@ static unsigned int ata_pack_xfermask(unsigned int pio_mask, * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. * Any NULL distination masks will be ignored. */ -static void ata_unpack_xfermask(unsigned int xfer_mask, - unsigned int *pio_mask, - unsigned int *mwdma_mask, - unsigned int *udma_mask) +void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, + unsigned long *mwdma_mask, unsigned long *udma_mask) { if (pio_mask) *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; @@ -476,9 +488,9 @@ static const struct ata_xfer_ent { int shift, bits; u8 base; } ata_xfer_tbl[] = { - { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, - { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, + { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 }, { -1, }, }; @@ -493,9 +505,9 @@ static const struct ata_xfer_ent { * None. * * RETURNS: - * Matching XFER_* value, 0 if no match found. + * Matching XFER_* value, 0xff if no match found. */ -static u8 ata_xfer_mask2mode(unsigned int xfer_mask) +u8 ata_xfer_mask2mode(unsigned long xfer_mask) { int highbit = fls(xfer_mask) - 1; const struct ata_xfer_ent *ent; @@ -503,7 +515,7 @@ static u8 ata_xfer_mask2mode(unsigned int xfer_mask) for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) if (highbit >= ent->shift && highbit < ent->shift + ent->bits) return ent->base + highbit - ent->shift; - return 0; + return 0xff; } /** @@ -518,13 +530,14 @@ static u8 ata_xfer_mask2mode(unsigned int xfer_mask) * RETURNS: * Matching xfer_mask, 0 if no match found. */ -static unsigned int ata_xfer_mode2mask(u8 xfer_mode) +unsigned long ata_xfer_mode2mask(u8 xfer_mode) { const struct ata_xfer_ent *ent; for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return 1 << (ent->shift + xfer_mode - ent->base); + return ((2 << (ent->shift + xfer_mode - ent->base)) - 1) + & ~((1 << ent->shift) - 1); return 0; } @@ -540,7 +553,7 @@ static unsigned int ata_xfer_mode2mask(u8 xfer_mode) * RETURNS: * Matching xfer_shift, -1 if no match found. */ -static int ata_xfer_mode2shift(unsigned int xfer_mode) +int ata_xfer_mode2shift(unsigned long xfer_mode) { const struct ata_xfer_ent *ent; @@ -564,7 +577,7 @@ static int ata_xfer_mode2shift(unsigned int xfer_mode) * Constant C string representing highest speed listed in * @mode_mask, or the constant C string "". */ -static const char *ata_mode_string(unsigned int xfer_mask) +const char *ata_mode_string(unsigned long xfer_mask) { static const char * const xfer_mode_str[] = { "PIO0", @@ -613,12 +626,190 @@ void ata_dev_disable(struct ata_device *dev) if (ata_dev_enabled(dev)) { if (ata_msg_drv(dev->link->ap)) ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + ata_acpi_on_disable(dev); ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET); dev->class++; } } +static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + u32 scontrol; + unsigned int err_mask; + int rc; + + /* + * disallow DIPM for drivers which haven't set + * ATA_FLAG_IPM. This is because when DIPM is enabled, + * phy ready will be set in the interrupt status on + * state changes, which will cause some drivers to + * think there are errors - additionally drivers will + * need to disable hot plug. + */ + if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) { + ap->pm_policy = NOT_AVAILABLE; + return -EINVAL; + } + + /* + * For DIPM, we will only enable it for the + * min_power setting. + * + * Why? Because Disks are too stupid to know that + * If the host rejects a request to go to SLUMBER + * they should retry at PARTIAL, and instead it + * just would give up. So, for medium_power to + * work at all, we need to only allow HIPM. + */ + rc = sata_scr_read(link, SCR_CONTROL, &scontrol); + if (rc) + return rc; + + switch (policy) { + case MIN_POWER: + /* no restrictions on IPM transitions */ + scontrol &= ~(0x3 << 8); + rc = sata_scr_write(link, SCR_CONTROL, scontrol); + if (rc) + return rc; + + /* enable DIPM */ + if (dev->flags & ATA_DFLAG_DIPM) + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, SATA_DIPM); + break; + case MEDIUM_POWER: + /* allow IPM to PARTIAL */ + scontrol &= ~(0x1 << 8); + scontrol |= (0x2 << 8); + rc = sata_scr_write(link, SCR_CONTROL, scontrol); + if (rc) + return rc; + + /* + * we don't have to disable DIPM since IPM flags + * disallow transitions to SLUMBER, which effectively + * disable DIPM if it does not support PARTIAL + */ + break; + case NOT_AVAILABLE: + case MAX_PERFORMANCE: + /* disable all IPM transitions */ + scontrol |= (0x3 << 8); + rc = sata_scr_write(link, SCR_CONTROL, scontrol); + if (rc) + return rc; + + /* + * we don't have to disable DIPM since IPM flags + * disallow all transitions which effectively + * disable DIPM anyway. + */ + break; + } + + /* FIXME: handle SET FEATURES failure */ + (void) err_mask; + + return 0; +} + +/** + * ata_dev_enable_pm - enable SATA interface power management + * @dev: device to enable power management + * @policy: the link power management policy + * + * Enable SATA Interface power management. This will enable + * Device Interface Power Management (DIPM) for min_power + * policy, and then call driver specific callbacks for + * enabling Host Initiated Power management. + * + * Locking: Caller. + * Returns: -EINVAL if IPM is not supported, 0 otherwise. + */ +void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy) +{ + int rc = 0; + struct ata_port *ap = dev->link->ap; + + /* set HIPM first, then DIPM */ + if (ap->ops->enable_pm) + rc = ap->ops->enable_pm(ap, policy); + if (rc) + goto enable_pm_out; + rc = ata_dev_set_dipm(dev, policy); + +enable_pm_out: + if (rc) + ap->pm_policy = MAX_PERFORMANCE; + else + ap->pm_policy = policy; + return /* rc */; /* hopefully we can use 'rc' eventually */ +} + +#ifdef CONFIG_PM +/** + * ata_dev_disable_pm - disable SATA interface power management + * @dev: device to disable power management + * + * Disable SATA Interface power management. This will disable + * Device Interface Power Management (DIPM) without changing + * policy, call driver specific callbacks for disabling Host + * Initiated Power management. + * + * Locking: Caller. + * Returns: void + */ +static void ata_dev_disable_pm(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + + ata_dev_set_dipm(dev, MAX_PERFORMANCE); + if (ap->ops->disable_pm) + ap->ops->disable_pm(ap); +} +#endif /* CONFIG_PM */ + +void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy) +{ + ap->pm_policy = policy; + ap->link.eh_info.action |= ATA_EHI_LPM; + ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY; + ata_port_schedule_eh(ap); +} + +#ifdef CONFIG_PM +static void ata_lpm_enable(struct ata_host *host) +{ + struct ata_link *link; + struct ata_port *ap; + struct ata_device *dev; + int i; + + for (i = 0; i < host->n_ports; i++) { + ap = host->ports[i]; + ata_port_for_each_link(link, ap) { + ata_link_for_each_dev(dev, link) + ata_dev_disable_pm(dev); + } + } +} + +static void ata_lpm_disable(struct ata_host *host) +{ + int i; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + ata_lpm_schedule(ap, ap->pm_policy); + } +} +#endif /* CONFIG_PM */ + + /** * ata_devchk - PATA device presence detection * @ap: ATA channel to examine @@ -713,7 +904,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) } if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { - printk("ata: SEMB device ignored\n"); + printk(KERN_INFO "ata: SEMB device ignored\n"); return ATA_DEV_SEMB_UNSUP; /* not yet */ } @@ -759,8 +950,8 @@ unsigned int ata_dev_try_classify(struct ata_device *dev, int present, if (r_err) *r_err = err; - /* see if device passed diags: if master then continue and warn later */ - if (err == 0 && dev->devno == 0) + /* see if device passed diags: continue and warn later */ + if (err == 0) /* diagnostic fail : do nothing _YET_ */ dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; else if (err == 1) @@ -926,7 +1117,7 @@ static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) tf.protocol |= ATA_PROT_NODATA; tf.device |= ATA_LBA; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); if (err_mask) { ata_dev_printk(dev, KERN_WARNING, "failed to read native " "max address (err_mask=0x%x)\n", err_mask); @@ -939,7 +1130,7 @@ static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) *max_sectors = ata_tf_to_lba48(&tf); else *max_sectors = ata_tf_to_lba(&tf); - if (dev->horkage & ATA_HORKAGE_HPA_SIZE) + if (dev->horkage & ATA_HORKAGE_HPA_SIZE) (*max_sectors)--; return 0; } @@ -988,7 +1179,7 @@ static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors) tf.lbam = (new_sectors >> 8) & 0xff; tf.lbah = (new_sectors >> 16) & 0xff; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); if (err_mask) { ata_dev_printk(dev, KERN_WARNING, "failed to set " "max address (err_mask=0x%x)\n", err_mask); @@ -1098,48 +1289,6 @@ static int ata_hpa_resize(struct ata_device *dev) } /** - * ata_id_to_dma_mode - Identify DMA mode from id block - * @dev: device to identify - * @unknown: mode to assume if we cannot tell - * - * Set up the timing values for the device based upon the identify - * reported values for the DMA mode. This function is used by drivers - * which rely upon firmware configured modes, but wish to report the - * mode correctly when possible. - * - * In addition we emit similarly formatted messages to the default - * ata_dev_set_mode handler, in order to provide consistency of - * presentation. - */ - -void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown) -{ - unsigned int mask; - u8 mode; - - /* Pack the DMA modes */ - mask = ((dev->id[63] >> 8) << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA; - if (dev->id[53] & 0x04) - mask |= ((dev->id[88] >> 8) << ATA_SHIFT_UDMA) & ATA_MASK_UDMA; - - /* Select the mode in use */ - mode = ata_xfer_mask2mode(mask); - - if (mode != 0) { - ata_dev_printk(dev, KERN_INFO, "configured for %s\n", - ata_mode_string(mask)); - } else { - /* SWDMA perhaps ? */ - mode = unknown; - ata_dev_printk(dev, KERN_INFO, "configured for DMA\n"); - } - - /* Configure the device reporting */ - dev->xfer_mode = mode; - dev->xfer_shift = ata_xfer_mode2shift(mode); -} - -/** * ata_noop_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate * @device: ATA device (numbered from zero) to select @@ -1151,7 +1300,7 @@ void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown) * LOCKING: * caller. */ -void ata_noop_dev_select (struct ata_port *ap, unsigned int device) +void ata_noop_dev_select(struct ata_port *ap, unsigned int device) { } @@ -1171,7 +1320,7 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) * caller. */ -void ata_std_dev_select (struct ata_port *ap, unsigned int device) +void ata_std_dev_select(struct ata_port *ap, unsigned int device) { u8 tmp; @@ -1276,9 +1425,9 @@ static inline void ata_dump_id(const u16 *id) * RETURNS: * Computed xfermask */ -static unsigned int ata_id_xfermask(const u16 *id) +unsigned long ata_id_xfermask(const u16 *id) { - unsigned int pio_mask, mwdma_mask, udma_mask; + unsigned long pio_mask, mwdma_mask, udma_mask; /* Usual case. Word 53 indicates word 64 is valid */ if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { @@ -1292,7 +1441,7 @@ static unsigned int ata_id_xfermask(const u16 *id) */ u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF; if (mode < 5) /* Valid PIO range */ - pio_mask = (2 << mode) - 1; + pio_mask = (2 << mode) - 1; else pio_mask = 1; @@ -1331,7 +1480,7 @@ static unsigned int ata_id_xfermask(const u16 *id) } /** - * ata_port_queue_task - Queue port_task + * ata_pio_queue_task - Queue port_task * @ap: The ata_port to queue port_task for * @fn: workqueue function to be scheduled * @data: data for @fn to use @@ -1343,16 +1492,15 @@ static unsigned int ata_id_xfermask(const u16 *id) * one task is active at any given time. * * libata core layer takes care of synchronization between - * port_task and EH. ata_port_queue_task() may be ignored for EH + * port_task and EH. ata_pio_queue_task() may be ignored for EH * synchronization. * * LOCKING: * Inherited from caller. */ -void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data, - unsigned long delay) +static void ata_pio_queue_task(struct ata_port *ap, void *data, + unsigned long delay) { - PREPARE_DELAYED_WORK(&ap->port_task, fn); ap->port_task_data = data; /* may fail if ata_port_flush_task() in progress */ @@ -1392,8 +1540,9 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc) * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command * @dma_dir: Data tranfer direction of the command - * @sg: sg list for the data buffer of the command + * @sgl: sg list for the data buffer of the command * @n_elem: Number of sg entries + * @timeout: Timeout in msecs (0 for default) * * Executes libata internal command with timeout. @tf contains * command on entry and result on return. Timeout and error @@ -1409,8 +1558,8 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc) */ unsigned ata_exec_internal_sg(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, struct scatterlist *sg, - unsigned int n_elem) + int dma_dir, struct scatterlist *sgl, + unsigned int n_elem, unsigned long timeout) { struct ata_link *link = dev->link; struct ata_port *ap = link->ap; @@ -1471,11 +1620,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { unsigned int i, buflen = 0; + struct scatterlist *sg; - for (i = 0; i < n_elem; i++) - buflen += sg[i].length; + for_each_sg(sgl, sg, n_elem, i) + buflen += sg->length; - ata_sg_init(qc, sg, n_elem); + ata_sg_init(qc, sgl, n_elem); qc->nbytes = buflen; } @@ -1486,7 +1636,10 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); - rc = wait_for_completion_timeout(&wait, ata_probe_timeout); + if (!timeout) + timeout = ata_probe_timeout * 1000 / HZ; + + rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); ata_port_flush_task(ap); @@ -1571,6 +1724,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, * @dma_dir: Data tranfer direction of the command * @buf: Data buffer of the command * @buflen: Length of data buffer + * @timeout: Timeout in msecs (0 for default) * * Wrapper around ata_exec_internal_sg() which takes simple * buffer instead of sg list. @@ -1583,7 +1737,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, */ unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen) + int dma_dir, void *buf, unsigned int buflen, + unsigned long timeout) { struct scatterlist *psg = NULL, sg; unsigned int n_elem = 0; @@ -1595,7 +1750,8 @@ unsigned ata_exec_internal(struct ata_device *dev, n_elem++; } - return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem); + return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem, + timeout); } /** @@ -1622,7 +1778,7 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) tf.flags |= ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; - return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); } /** @@ -1685,7 +1841,7 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) * for pre-ATA4 drives. * * FIXME: ATA_CMD_ID_ATA is optional for early drives and right - * now we abort if we hit that case. + * now we abort if we hit that case. * * LOCKING: * Kernel thread context (may sleep) @@ -1737,7 +1893,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, tf.flags |= ATA_TFLAG_POLLING; err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - id, sizeof(id[0]) * ATA_ID_WORDS); + id, sizeof(id[0]) * ATA_ID_WORDS, 0); if (err_mask) { if (err_mask & AC_ERR_NODEV_HINT) { DPRINTK("ata%u.%d: NODEV after polling detection\n", @@ -1791,12 +1947,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, * SET_FEATURES spin-up subcommand before it will accept * anything other than the original IDENTIFY command. */ - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_SET_FEATURES; - tf.feature = SETFEATURES_SPINUP; - tf.protocol = ATA_PROT_NODATA; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0); if (err_mask && id[2] != 0x738c) { rc = -EIO; reason = "SPINUP failed"; @@ -1899,7 +2050,7 @@ int ata_dev_configure(struct ata_device *dev) struct ata_eh_context *ehc = &dev->link->eh_context; int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; - unsigned int xfer_mask; + unsigned long xfer_mask; char revbuf[7]; /* XYZ-99\0 */ char fwrevbuf[ATA_ID_FW_REV_LEN+1]; char modelbuf[ATA_ID_PROD_LEN+1]; @@ -1970,9 +2121,14 @@ int ata_dev_configure(struct ata_device *dev) "supports DRM functions and may " "not be fully accessable.\n"); snprintf(revbuf, 7, "CFA"); + } else { + snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); + /* Warn the user if the device has TPM extensions */ + if (ata_id_has_tpm(id)) + ata_dev_printk(dev, KERN_WARNING, + "supports DRM functions and may " + "not be fully accessable.\n"); } - else - snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); dev->n_sectors = ata_id_n_sectors(id); @@ -2067,7 +2223,8 @@ int ata_dev_configure(struct ata_device *dev) unsigned int err_mask; /* issue SET feature command to turn this on */ - err_mask = ata_dev_set_AN(dev, SETFEATURES_SATA_ENABLE); + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, SATA_AN); if (err_mask) ata_dev_printk(dev, KERN_ERR, "failed to enable ATAPI AN " @@ -2097,19 +2254,15 @@ int ata_dev_configure(struct ata_device *dev) if (dev->flags & ATA_DFLAG_LBA48) dev->max_sectors = ATA_MAX_SECTORS_LBA48; - if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { - /* Let the user know. We don't want to disallow opens for - rescue purposes, or in case the vendor is just a blithering - idiot */ - if (print_info) { - ata_dev_printk(dev, KERN_WARNING, -"Drive reports diagnostics failure. This may indicate a drive\n"); - ata_dev_printk(dev, KERN_WARNING, -"fault or invalid emulation. Contact drive vendor for information.\n"); - } + if (!(dev->horkage & ATA_HORKAGE_IPM)) { + if (ata_id_has_hipm(dev->id)) + dev->flags |= ATA_DFLAG_HIPM; + if (ata_id_has_dipm(dev->id)) + dev->flags |= ATA_DFLAG_DIPM; } - /* limit bridge transfers to udma5, 200 sectors */ + /* Limit PATA drive on SATA cable bridge transfers to udma5, + 200 sectors */ if (ata_dev_knobble(dev)) { if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, @@ -2118,13 +2271,41 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = ATA_MAX_SECTORS; } + if ((dev->class == ATA_DEV_ATAPI) && + (atapi_command_packet_set(id) == TYPE_TAPE)) { + dev->max_sectors = ATA_MAX_SECTORS_TAPE; + dev->horkage |= ATA_HORKAGE_STUCK_ERR; + } + if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); + if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) { + dev->horkage |= ATA_HORKAGE_IPM; + + /* reset link pm_policy for this port to no pm */ + ap->pm_policy = MAX_PERFORMANCE; + } + if (ap->ops->dev_config) ap->ops->dev_config(dev); + if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { + /* Let the user know. We don't want to disallow opens for + rescue purposes, or in case the vendor is just a blithering + idiot. Do this after the dev_config call as some controllers + with buggy firmware may want to avoid reporting false device + bugs */ + + if (print_info) { + ata_dev_printk(dev, KERN_WARNING, +"Drive reports diagnostics failure. This may indicate a drive\n"); + ata_dev_printk(dev, KERN_WARNING, +"fault or invalid emulation. Contact drive vendor for information.\n"); + } + } + if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", __FUNCTION__, ata_chk_status(ap)); @@ -2176,6 +2357,18 @@ int ata_cable_unknown(struct ata_port *ap) } /** + * ata_cable_ignore - return ignored PATA cable. + * @ap: port + * + * Helper method for drivers which don't use cable type to limit + * transfer mode. + */ +int ata_cable_ignore(struct ata_port *ap) +{ + return ATA_CBL_PATA_IGN; +} + +/** * ata_cable_sata - return SATA cable type * @ap: port * @@ -2215,6 +2408,25 @@ int ata_bus_probe(struct ata_port *ap) tries[dev->devno] = ATA_PROBE_MAX_TRIES; retry: + ata_link_for_each_dev(dev, &ap->link) { + /* If we issue an SRST then an ATA drive (not ATAPI) + * may change configuration and be in PIO0 timing. If + * we do a hard reset (or are coming from power on) + * this is true for ATA or ATAPI. Until we've set a + * suitable controller mode we should not touch the + * bus as we may be talking too fast. + */ + dev->pio_mode = XFER_PIO_0; + + /* If the controller has a pio mode setup function + * then use it to set the chipset to rights. Don't + * touch the DMA setup as that will be dealt with when + * configuring devices. + */ + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); + } + /* reset and determine device classes */ ap->ops->phy_reset(ap); @@ -2230,12 +2442,6 @@ int ata_bus_probe(struct ata_port *ap) ata_port_probe(ap); - /* after the reset the device state is PIO 0 and the controller - state is undefined. Record the mode */ - - ata_link_for_each_dev(dev, &ap->link) - dev->pio_mode = XFER_PIO_0; - /* read IDENTIFY page and configure devices. We have to do the identify specific sequence bass-ackwards so that PDIAG- is released by the slave device */ @@ -2369,81 +2575,6 @@ void sata_print_link_status(struct ata_link *link) } /** - * __sata_phy_reset - Wake/reset a low-level SATA PHY - * @ap: SATA port associated with target SATA PHY. - * - * This function issues commands to standard SATA Sxxx - * PHY registers, to wake up the phy (and device), and - * clear any reset condition. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void __sata_phy_reset(struct ata_port *ap) -{ - struct ata_link *link = &ap->link; - unsigned long timeout = jiffies + (HZ * 5); - u32 sstatus; - - if (ap->flags & ATA_FLAG_SATA_RESET) { - /* issue phy wake/reset */ - sata_scr_write_flush(link, SCR_CONTROL, 0x301); - /* Couldn't find anything in SATA I/II specs, but - * AHCI-1.1 10.4.2 says at least 1 ms. */ - mdelay(1); - } - /* phy wake/clear reset */ - sata_scr_write_flush(link, SCR_CONTROL, 0x300); - - /* wait for phy to become ready, if necessary */ - do { - msleep(200); - sata_scr_read(link, SCR_STATUS, &sstatus); - if ((sstatus & 0xf) != 1) - break; - } while (time_before(jiffies, timeout)); - - /* print link status */ - sata_print_link_status(link); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (!ata_link_offline(link)) - ata_port_probe(ap); - else - ata_port_disable(ap); - - if (ap->flags & ATA_FLAG_DISABLED) - return; - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_disable(ap); - return; - } - - ap->cbl = ATA_CBL_SATA; -} - -/** - * sata_phy_reset - Reset SATA bus. - * @ap: SATA port associated with target SATA PHY. - * - * This function resets the SATA bus, and then probes - * the bus for devices. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void sata_phy_reset(struct ata_port *ap) -{ - __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_DISABLED) - return; - ata_bus_reset(ap); -} - -/** * ata_dev_pair - return other device on cable * @adev: device * @@ -2541,17 +2672,27 @@ int sata_down_spd_limit(struct ata_link *link) static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) { - u32 spd, limit; + struct ata_link *host_link = &link->ap->link; + u32 limit, target, spd; - if (link->sata_spd_limit == UINT_MAX) - limit = 0; + limit = link->sata_spd_limit; + + /* Don't configure downstream link faster than upstream link. + * It doesn't speed up anything and some PMPs choke on such + * configuration. + */ + if (!ata_is_host_link(link) && host_link->sata_spd) + limit &= (1 << host_link->sata_spd) - 1; + + if (limit == UINT_MAX) + target = 0; else - limit = fls(link->sata_spd_limit); + target = fls(limit); spd = (*scontrol >> 4) & 0xf; - *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); + *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4); - return spd != limit; + return spd != target; } /** @@ -2574,7 +2715,7 @@ int sata_set_spd_needed(struct ata_link *link) u32 scontrol; if (sata_scr_read(link, SCR_CONTROL, &scontrol)) - return 0; + return 1; return __sata_set_spd_needed(link, &scontrol); } @@ -2622,44 +2763,39 @@ int sata_set_spd(struct ata_link *link) */ static const struct ata_timing ata_timing[] = { +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - - { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, - { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - -/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, { 0xFF } }; -#define ENOUGH(v,unit) (((v)-1)/(unit)+1) -#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) +#define ENOUGH(v, unit) (((v)-1)/(unit)+1) +#define EZ(v, unit) ((v)?ENOUGH(v, unit):0) static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) { @@ -2686,14 +2822,16 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); } -static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) { - const struct ata_timing *t; + const struct ata_timing *t = ata_timing; - for (t = ata_timing; t->mode != speed; t++) - if (t->mode == 0xFF) - return NULL; - return t; + while (xfer_mode > t->mode) + t++; + + if (xfer_mode == t->mode) + return t; + return NULL; } int ata_timing_compute(struct ata_device *adev, unsigned short speed, @@ -2718,10 +2856,10 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); - if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; - } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; } ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); @@ -2768,6 +2906,57 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, } /** + * ata_timing_cycle2mode - find xfer mode for the specified cycle duration + * @xfer_shift: ATA_SHIFT_* value for transfer type to examine. + * @cycle: cycle duration in ns + * + * Return matching xfer mode for @cycle. The returned mode is of + * the transfer type specified by @xfer_shift. If @cycle is too + * slow for @xfer_shift, 0xff is returned. If @cycle is faster + * than the fastest known mode, the fasted mode is returned. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mode, 0xff if no match found. + */ +u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle) +{ + u8 base_mode = 0xff, last_mode = 0xff; + const struct ata_xfer_ent *ent; + const struct ata_timing *t; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (ent->shift == xfer_shift) + base_mode = ent->base; + + for (t = ata_timing_find_mode(base_mode); + t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) { + unsigned short this_cycle; + + switch (xfer_shift) { + case ATA_SHIFT_PIO: + case ATA_SHIFT_MWDMA: + this_cycle = t->cycle; + break; + case ATA_SHIFT_UDMA: + this_cycle = t->udma; + break; + default: + return 0xff; + } + + if (cycle > this_cycle) + break; + + last_mode = t->mode; + } + + return last_mode; +} + +/** * ata_down_xfermask_limit - adjust dev xfer masks downward * @dev: Device to adjust xfer masks * @sel: ATA_DNXFER_* selector @@ -2785,8 +2974,8 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) { char buf[32]; - unsigned int orig_mask, xfer_mask; - unsigned int pio_mask, mwdma_mask, udma_mask; + unsigned long orig_mask, xfer_mask; + unsigned long pio_mask, mwdma_mask, udma_mask; int quiet, highbit; quiet = !!(sel & ATA_DNXFER_QUIET); @@ -2859,6 +3048,8 @@ int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) static int ata_dev_set_mode(struct ata_device *dev) { struct ata_eh_context *ehc = &dev->link->eh_context; + const char *dev_err_whine = ""; + int ign_dev_err = 0; unsigned int err_mask; int rc; @@ -2867,38 +3058,64 @@ static int ata_dev_set_mode(struct ata_device *dev) dev->flags |= ATA_DFLAG_PIO; err_mask = ata_dev_set_xfermode(dev); + + if (err_mask & ~AC_ERR_DEV) + goto fail; + + /* revalidate */ + ehc->i.flags |= ATA_EHI_POST_SETMODE; + rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0); + ehc->i.flags &= ~ATA_EHI_POST_SETMODE; + if (rc) + return rc; + /* Old CFA may refuse this command, which is just fine */ if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id)) - err_mask &= ~AC_ERR_DEV; + ign_dev_err = 1; + /* Some very old devices and some bad newer ones fail any kind of SET_XFERMODE request but support PIO0-2 timings and no IORDY */ if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2) - err_mask &= ~AC_ERR_DEV; - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " - "(err_mask=0x%x)\n", err_mask); - return -EIO; - } + ign_dev_err = 1; - ehc->i.flags |= ATA_EHI_POST_SETMODE; - rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0); - ehc->i.flags &= ~ATA_EHI_POST_SETMODE; - if (rc) - return rc; + /* Early MWDMA devices do DMA but don't allow DMA mode setting. + Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ + if (dev->xfer_shift == ATA_SHIFT_MWDMA && + dev->dma_mode == XFER_MW_DMA_0 && + (dev->id[63] >> 8) & 1) + ign_dev_err = 1; + + /* if the device is actually configured correctly, ignore dev err */ + if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id))) + ign_dev_err = 1; + + if (err_mask & AC_ERR_DEV) { + if (!ign_dev_err) + goto fail; + else + dev_err_whine = " (device error ignored)"; + } DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", dev->xfer_shift, (int)dev->xfer_mode); - ata_dev_printk(dev, KERN_INFO, "configured for %s\n", - ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); + ata_dev_printk(dev, KERN_INFO, "configured for %s%s\n", + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)), + dev_err_whine); + return 0; + + fail: + ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " + "(err_mask=0x%x)\n", err_mask); + return -EIO; } /** * ata_do_set_mode - Program timings and issue SET FEATURES - XFER * @link: link on which timings will be programmed - * @r_failed_dev: out paramter for failed device + * @r_failed_dev: out parameter for failed device * * Standard implementation of the function used to tune and set * ATA device disk transfer mode (PIO3, UDMA6, etc.). If @@ -2920,7 +3137,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* step 1: calculate xfer_mask */ ata_link_for_each_dev(dev, link) { - unsigned int pio_mask, dma_mask; + unsigned long pio_mask, dma_mask; unsigned int mode_mask; if (!ata_dev_enabled(dev)) @@ -2946,7 +3163,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) dev->dma_mode = ata_xfer_mask2mode(dma_mask); found = 1; - if (dev->dma_mode) + if (dev->dma_mode != 0xff) used_dma = 1; } if (!found) @@ -2957,7 +3174,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) if (!ata_dev_enabled(dev)) continue; - if (!dev->pio_mode) { + if (dev->pio_mode == 0xff) { ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); rc = -EINVAL; goto out; @@ -2971,7 +3188,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* step 3: set host DMA timings */ ata_link_for_each_dev(dev, link) { - if (!ata_dev_enabled(dev) || !dev->dma_mode) + if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff) continue; dev->xfer_mode = dev->dma_mode; @@ -3004,31 +3221,6 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) } /** - * ata_set_mode - Program timings and issue SET FEATURES - XFER - * @link: link on which timings will be programmed - * @r_failed_dev: out paramter for failed device - * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If - * ata_set_mode() fails, pointer to the failing device is - * returned in @r_failed_dev. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) -{ - struct ata_port *ap = link->ap; - - /* has private set_mode? */ - if (ap->ops->set_mode) - return ap->ops->set_mode(link, r_failed_dev); - return ata_do_set_mode(link, r_failed_dev); -} - -/** * ata_tf_to_host - issue ATA taskfile to host controller * @ap: port to which command is being issued * @tf: ATA taskfile register set @@ -3104,6 +3296,61 @@ int ata_busy_sleep(struct ata_port *ap, } /** + * ata_wait_after_reset - wait before checking status after reset + * @ap: port containing status register to be polled + * @deadline: deadline jiffies for the operation + * + * After reset, we need to pause a while before reading status. + * Also, certain combination of controller and device report 0xff + * for some duration (e.g. until SATA PHY is up and running) + * which is interpreted as empty port in ATA world. This + * function also waits for such devices to get out of 0xff + * status. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline) +{ + unsigned long until = jiffies + ATA_TMOUT_FF_WAIT; + + if (time_before(until, deadline)) + deadline = until; + + /* Spec mandates ">= 2ms" before checking status. We wait + * 150ms, because that was the magic delay used for ATAPI + * devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready. + */ + msleep(150); + + /* Wait for 0xff to clear. Some SATA devices take a long time + * to clear 0xff after reset. For example, HHD424020F7SV00 + * iVDR needs >= 800ms while. Quantum GoVault needs even more + * than that. + * + * Note that some PATA controllers (pata_ali) explode if + * status register is read more than once when there's no + * device attached. + */ + if (ap->flags & ATA_FLAG_SATA) { + while (1) { + u8 status = ata_chk_status(ap); + + if (status != 0xff || time_after(jiffies, deadline)) + return; + + msleep(50); + } + } +} + +/** * ata_wait_ready - sleep until BSY clears, or timeout * @ap: port containing status register to be polled * @deadline: deadline jiffies for the operation @@ -3209,8 +3456,6 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; - struct ata_device *dev; - int i = 0; DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); @@ -3221,42 +3466,14 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, udelay(20); /* FIXME: flush */ iowrite8(ap->ctl, ioaddr->ctl_addr); - /* If we issued an SRST then an ATA drive (not ATAPI) - * may have changed configuration and be in PIO0 timing. If - * we did a hard reset (or are coming from power on) this is - * true for ATA or ATAPI. Until we've set a suitable controller - * mode we should not touch the bus as we may be talking too fast. - */ - - ata_link_for_each_dev(dev, &ap->link) - dev->pio_mode = XFER_PIO_0; - - /* If the controller has a pio mode setup function then use - it to set the chipset to rights. Don't touch the DMA setup - as that will be dealt with when revalidating */ - if (ap->ops->set_piomode) { - ata_link_for_each_dev(dev, &ap->link) - if (devmask & (1 << i++)) - ap->ops->set_piomode(ap, dev); - } - - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready - */ - msleep(150); + /* wait a while before checking status */ + ata_wait_after_reset(ap, deadline); /* Before we perform post reset processing we want to see if * the bus shows 0xFF because the odd clown forgets the D7 * pulldown resistor. */ - if (ata_check_status(ap) == 0xFF) + if (ata_chk_status(ap) == 0xFF) return -ENODEV; return ata_bus_post_reset(ap, devmask, deadline); @@ -3677,8 +3894,8 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class, return 0; } - /* wait a while before checking status, see SRST for more info */ - msleep(150); + /* wait a while before checking status */ + ata_wait_after_reset(ap, deadline); /* If PMP is supported, we have to do follow-up SRST. Note * that some PMPs don't send D2H Reg FIS after hardreset at @@ -3731,6 +3948,7 @@ void ata_std_postreset(struct ata_link *link, unsigned int *classes) /* clear SError */ if (sata_scr_read(link, SCR_ERROR, &serror) == 0) sata_scr_write(link, SCR_ERROR, serror); + link->eh_info.serror = 0; /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) @@ -3934,11 +4152,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA }, { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, - { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA }, + { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, - { "IOMEGA ZIP 250 ATAPI", NULL, ATA_HORKAGE_NODMA }, /* temporary fix */ - { "IOMEGA ZIP 250 ATAPI Floppy", - NULL, ATA_HORKAGE_NODMA }, /* Odd clown on sil3726/4726 PMPs */ { "Config Disk", NULL, ATA_HORKAGE_NODMA | ATA_HORKAGE_SKIP_PM }, @@ -3950,35 +4165,21 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices where NCQ should be avoided */ /* NCQ is slow */ - { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, + { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, + { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, /* http://thread.gmane.org/gmane.linux.ide/14907 */ { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, /* NCQ is broken */ { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ }, { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, - { "HITACHI HDS7250SASUN500G*", NULL, ATA_HORKAGE_NONCQ }, - { "HITACHI HDS7225SBSUN250G*", NULL, ATA_HORKAGE_NONCQ }, { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, + { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, - /* Drives which do spurious command completion */ - { "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, }, - { "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, }, - { "HDT722516DLA380", "V43OA96A", ATA_HORKAGE_NONCQ, }, - { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, }, - { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, - { "WDC WD3200AAJS-00RYA0", "12.01B01", ATA_HORKAGE_NONCQ, }, - { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, }, - { "ST9120822AS", "3.CLF", ATA_HORKAGE_NONCQ, }, - { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, }, - { "ST9160821AS", "3.ALD", ATA_HORKAGE_NONCQ, }, - { "ST3160812AS", "3.ADJ", ATA_HORKAGE_NONCQ, }, - { "ST980813AS", "3.ADB", ATA_HORKAGE_NONCQ, }, - { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, }, /* devices which puke on READ_NATIVE_MAX */ { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, }, @@ -3990,11 +4191,18 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, }, { "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, }, + /* Devices which get the IVB wrong */ + { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, }, + { "TSSTcorp CDDVDW SH-S202J", "SB00", ATA_HORKAGE_IVB, }, + { "TSSTcorp CDDVDW SH-S202J", "SB01", ATA_HORKAGE_IVB, }, + { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, }, + { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, }, + /* End Marker */ { } }; -int strn_pattern_cmp(const char *patt, const char *name, int wildchar) +static int strn_pattern_cmp(const char *patt, const char *name, int wildchar) { const char *p; int len; @@ -4005,8 +4213,14 @@ int strn_pattern_cmp(const char *patt, const char *name, int wildchar) p = strchr(patt, wildchar); if (p && ((*(p + 1)) == 0)) len = p - patt; - else + else { len = strlen(name); + if (!len) { + if (!*patt) + return 0; + return -1; + } + } return strncmp(patt, name, len); } @@ -4045,6 +4259,21 @@ static int ata_dma_blacklisted(const struct ata_device *dev) } /** + * ata_is_40wire - check drive side detection + * @dev: device + * + * Perform drive side detection decoding, allowing for device vendors + * who can't follow the documentation. + */ + +static int ata_is_40wire(struct ata_device *dev) +{ + if (dev->horkage & ATA_HORKAGE_IVB) + return ata_drive_40wire_relaxed(dev->id); + return ata_drive_40wire(dev->id); +} + +/** * ata_dev_xfermask - Compute supported xfermask of the given device * @dev: Device to compute xfermask for * @@ -4090,7 +4319,7 @@ static void ata_dev_xfermask(struct ata_device *dev) } if ((host->flags & ATA_HOST_SIMPLEX) && - host->simplex_claimed && host->simplex_claimed != ap) { + host->simplex_claimed && host->simplex_claimed != ap) { xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " "other device, disabling DMA\n"); @@ -4112,11 +4341,11 @@ static void ata_dev_xfermask(struct ata_device *dev) */ if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) /* UDMA/44 or higher would be available */ - if((ap->cbl == ATA_CBL_PATA40) || - (ata_drive_40wire(dev->id) && - (ap->cbl == ATA_CBL_PATA_UNK || - ap->cbl == ATA_CBL_PATA80))) { - ata_dev_printk(dev, KERN_WARNING, + if ((ap->cbl == ATA_CBL_PATA40) || + (ata_is_40wire(dev) && + (ap->cbl == ATA_CBL_PATA_UNK || + ap->cbl == ATA_CBL_PATA80))) { + ata_dev_printk(dev, KERN_WARNING, "limited to UDMA/33 due to 40-wire cable\n"); xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); } @@ -4155,22 +4384,28 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) tf.feature = SETFEATURES_XFER; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING; tf.protocol = ATA_PROT_NODATA; - tf.nsect = dev->xfer_mode; + /* If we are using IORDY we must send the mode setting command */ + if (ata_pio_need_iordy(dev)) + tf.nsect = dev->xfer_mode; + /* If the device has IORDY and the controller does not - turn it off */ + else if (ata_id_has_iordy(dev->id)) + tf.nsect = 0x01; + else /* In the ancient relic department - skip all of this */ + return 0; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; } - /** - * ata_dev_set_AN - Issue SET FEATURES - SATA FEATURES + * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES * @dev: Device to which command will be sent * @enable: Whether to enable or disable the feature + * @feature: The sector count represents the feature to set * * Issue SET FEATURES - SATA FEATURES command to device @dev - * on port @ap with sector count set to indicate Asynchronous - * Notification feature + * on port @ap with sector count * * LOCKING: * PCI/etc. bus probe sem. @@ -4178,7 +4413,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ -static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable) +static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, + u8 feature) { struct ata_taskfile tf; unsigned int err_mask; @@ -4191,9 +4427,9 @@ static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable) tf.feature = enable; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.protocol = ATA_PROT_NODATA; - tf.nsect = SATA_AN; + tf.nsect = feature; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -4231,7 +4467,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, tf.nsect = sectors; tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); /* A clean abort indicates an original or just out of spec drive and we should continue as we issue the setup based on the drive reported working geometry */ @@ -4254,17 +4490,13 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, void ata_sg_clean(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; + struct scatterlist *sg = qc->sg; int dir = qc->dma_dir; void *pad_buf = NULL; - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); WARN_ON(sg == NULL); - if (qc->flags & ATA_QCFLAG_SINGLE) - WARN_ON(qc->n_elem > 1); - - VPRINTK("unmapping %u sg elements\n", qc->n_elem); + VPRINTK("unmapping %u sg elements\n", qc->mapped_n_elem); /* if we padded the buffer out to 32-bit bound, and data * xfer direction is from-device, we must copy from the @@ -4273,31 +4505,20 @@ void ata_sg_clean(struct ata_queued_cmd *qc) if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - if (qc->flags & ATA_QCFLAG_SG) { - if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); - /* restore last sg */ - sg[qc->orig_n_elem - 1].length += qc->pad_len; - if (pad_buf) { - struct scatterlist *psg = &qc->pad_sgent; - void *addr = kmap_atomic(psg->page, KM_IRQ0); - memcpy(addr + psg->offset, pad_buf, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - } else { - if (qc->n_elem) - dma_unmap_single(ap->dev, - sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), - dir); - /* restore sg */ - sg->length += qc->pad_len; - if (pad_buf) - memcpy(qc->buf_virt + sg->length - qc->pad_len, - pad_buf, qc->pad_len); + if (qc->mapped_n_elem) + dma_unmap_sg(ap->dev, sg, qc->mapped_n_elem, dir); + /* restore last sg */ + if (qc->last_sg) + *qc->last_sg = qc->saved_last_sg; + if (pad_buf) { + struct scatterlist *psg = &qc->extra_sg[1]; + void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); + memcpy(addr + psg->offset, pad_buf, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); } qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->__sg = NULL; + qc->sg = NULL; } /** @@ -4315,13 +4536,10 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + unsigned int si, pi; - idx = 0; - ata_for_each_sg(sg, qc) { + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len; @@ -4338,18 +4556,17 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) if ((offset + sg_len) > 0x10000) len = 0x10000 - offset; - ap->prd[idx].addr = cpu_to_le32(addr); - ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + ap->prd[pi].addr = cpu_to_le32(addr); + ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - idx++; + pi++; sg_len -= len; addr += len; } } - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } /** @@ -4369,17 +4586,14 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; + unsigned int si, pi; - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - idx = 0; - ata_for_each_sg(sg, qc) { + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len, blen; - /* determine if physical DMA addr spans 64K boundary. + /* determine if physical DMA addr spans 64K boundary. * Note h/w doesn't support 64-bit, so we unconditionally * truncate dma_addr_t to u32. */ @@ -4393,25 +4607,24 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) len = 0x10000 - offset; blen = len & 0xffff; - ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[pi].addr = cpu_to_le32(addr); if (blen == 0) { /* Some PATA chipsets like the CS5530 can't cope with 0x0000 meaning 64K as the spec says */ - ap->prd[idx].flags_len = cpu_to_le32(0x8000); + ap->prd[pi].flags_len = cpu_to_le32(0x8000); blen = 0x8000; - ap->prd[++idx].addr = cpu_to_le32(addr + 0x8000); + ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000); } - ap->prd[idx].flags_len = cpu_to_le32(blen); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + ap->prd[pi].flags_len = cpu_to_le32(blen); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - idx++; + pi++; sg_len -= len; addr += len; } } - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } /** @@ -4445,6 +4658,43 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) } /** + * atapi_qc_may_overflow - Check whether data transfer may overflow + * @qc: ATA command in question + * + * ATAPI commands which transfer variable length data to host + * might overflow due to application error or hardare bug. This + * function checks whether overflow should be drained and ignored + * for @qc. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @qc may overflow; otherwise, 0. + */ +static int atapi_qc_may_overflow(struct ata_queued_cmd *qc) +{ + if (qc->tf.protocol != ATAPI_PROT_PIO && + qc->tf.protocol != ATAPI_PROT_DMA) + return 0; + + if (qc->tf.flags & ATA_TFLAG_WRITE) + return 0; + + switch (qc->cdb[0]) { + case READ_10: + case READ_12: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_READ_CD_MSF: + return 0; + } + + return 1; +} + +/** * ata_std_qc_defer - Check whether a qc needs to be deferred * @qc: ATA command in question * @@ -4511,32 +4761,6 @@ void ata_dumb_qc_prep(struct ata_queued_cmd *qc) void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } /** - * ata_sg_init_one - Associate command with memory buffer - * @qc: Command to be associated - * @buf: Memory buffer - * @buflen: Length of memory buffer, in bytes. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a single memory buffer, @buf of byte length @buflen. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) -{ - qc->flags |= ATA_QCFLAG_SINGLE; - - qc->__sg = &qc->sgent; - qc->n_elem = 1; - qc->orig_n_elem = 1; - qc->buf_virt = buf; - qc->nbytes = buflen; - - sg_init_one(&qc->sgent, buf, buflen); -} - -/** * ata_sg_init - Associate command with scatter-gather table. * @qc: Command to be associated * @sg: Scatter-gather table. @@ -4549,83 +4773,103 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * LOCKING: * spin_lock_irqsave(host lock) */ - void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { - qc->flags |= ATA_QCFLAG_SG; - qc->__sg = sg; + qc->sg = sg; qc->n_elem = n_elem; - qc->orig_n_elem = n_elem; + qc->cursg = qc->sg; } -/** - * ata_sg_setup_one - DMA-map the memory buffer associated with a command. - * @qc: Command with memory buffer to be mapped. - * - * DMA-map the memory buffer associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * Zero on success, negative on error. - */ - -static int ata_sg_setup_one(struct ata_queued_cmd *qc) +static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc, + unsigned int *n_elem_extra, + unsigned int *nbytes_extra) { struct ata_port *ap = qc->ap; - int dir = qc->dma_dir; - struct scatterlist *sg = qc->__sg; - dma_addr_t dma_address; - int trim_sg = 0; + unsigned int n_elem = qc->n_elem; + struct scatterlist *lsg, *copy_lsg = NULL, *tsg = NULL, *esg = NULL; + + *n_elem_extra = 0; + *nbytes_extra = 0; + + /* needs padding? */ + qc->pad_len = qc->nbytes & 3; + + if (likely(!qc->pad_len)) + return n_elem; + + /* locate last sg and save it */ + lsg = sg_last(qc->sg, n_elem); + qc->last_sg = lsg; + qc->saved_last_sg = *lsg; + + sg_init_table(qc->extra_sg, ARRAY_SIZE(qc->extra_sg)); - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = sg->length & 3; if (qc->pad_len) { + struct scatterlist *psg = &qc->extra_sg[1]; void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; + unsigned int offset; WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); - if (qc->tf.flags & ATA_TFLAG_WRITE) - memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len, - qc->pad_len); + /* psg->page/offset are used to copy to-be-written + * data in this function or read data in ata_sg_clean. + */ + offset = lsg->offset + lsg->length - qc->pad_len; + sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT), + qc->pad_len, offset_in_page(offset)); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); + memcpy(pad_buf, addr + psg->offset, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); + } sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim sg */ - sg->length -= qc->pad_len; - if (sg->length == 0) - trim_sg = 1; - DPRINTK("padding done, sg->length=%u pad_len=%u\n", - sg->length, qc->pad_len); - } + /* Trim the last sg entry and chain the original and + * padding sg lists. + * + * Because chaining consumes one sg entry, one extra + * sg entry is allocated and the last sg entry is + * copied to it if the length isn't zero after padded + * amount is removed. + * + * If the last sg entry is completely replaced by + * padding sg entry, the first sg entry is skipped + * while chaining. + */ + lsg->length -= qc->pad_len; + if (lsg->length) { + copy_lsg = &qc->extra_sg[0]; + tsg = &qc->extra_sg[0]; + } else { + n_elem--; + tsg = &qc->extra_sg[1]; + } - if (trim_sg) { - qc->n_elem--; - goto skip_map; - } + esg = &qc->extra_sg[1]; - dma_address = dma_map_single(ap->dev, qc->buf_virt, - sg->length, dir); - if (dma_mapping_error(dma_address)) { - /* restore sg */ - sg->length += qc->pad_len; - return -1; + (*n_elem_extra)++; + (*nbytes_extra) += 4 - qc->pad_len; } - sg_dma_address(sg) = dma_address; - sg_dma_len(sg) = sg->length; + if (copy_lsg) + sg_set_page(copy_lsg, sg_page(lsg), lsg->length, lsg->offset); -skip_map: - DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), - qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + sg_chain(lsg, 1, tsg); + sg_mark_end(esg); - return 0; + /* sglist can't start with chaining sg entry, fast forward */ + if (qc->sg == lsg) { + qc->sg = tsg; + qc->cursg = tsg; + } + + return n_elem; } /** @@ -4641,74 +4885,30 @@ skip_map: * Zero on success, negative on error. * */ - static int ata_sg_setup(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - struct scatterlist *lsg = &sg[qc->n_elem - 1]; - int n_elem, pre_n_elem, dir, trim_sg = 0; + unsigned int n_elem, n_elem_extra, nbytes_extra; VPRINTK("ENTER, ata%u\n", ap->print_id); - WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = lsg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - unsigned int offset; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); - - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - /* - * psg->page/offset are used to copy to-be-written - * data in this function or read data in ata_sg_clean. - */ - offset = lsg->offset + lsg->length - qc->pad_len; - psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT); - psg->offset = offset_in_page(offset); + n_elem = ata_sg_setup_extra(qc, &n_elem_extra, &nbytes_extra); - if (qc->tf.flags & ATA_TFLAG_WRITE) { - void *addr = kmap_atomic(psg->page, KM_IRQ0); - memcpy(pad_buf, addr + psg->offset, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); + if (n_elem) { + n_elem = dma_map_sg(ap->dev, qc->sg, n_elem, qc->dma_dir); + if (n_elem < 1) { + /* restore last sg */ + if (qc->last_sg) + *qc->last_sg = qc->saved_last_sg; + return -1; } - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim last sg */ - lsg->length -= qc->pad_len; - if (lsg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", - qc->n_elem - 1, lsg->length, qc->pad_len); - } - - pre_n_elem = qc->n_elem; - if (trim_sg && pre_n_elem) - pre_n_elem--; - - if (!pre_n_elem) { - n_elem = 0; - goto skip_map; - } - - dir = qc->dma_dir; - n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); - if (n_elem < 1) { - /* restore last sg */ - lsg->length += qc->pad_len; - return -1; + DPRINTK("%d sg elements mapped\n", n_elem); } - DPRINTK("%d sg elements mapped\n", n_elem); - -skip_map: - qc->n_elem = n_elem; + qc->n_elem = qc->mapped_n_elem = n_elem; + qc->n_elem += n_elem_extra; + qc->nbytes += nbytes_extra; + qc->flags |= ATA_QCFLAG_DMAMAP; return 0; } @@ -4737,63 +4937,77 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_data_xfer - Transfer data by PIO - * @adev: device to target + * @dev: device to target * @buf: data buffer * @buflen: buffer length - * @write_data: read/write + * @rw: read/write * * Transfer data from/to the device data register by PIO. * * LOCKING: * Inherited from caller. + * + * RETURNS: + * Bytes consumed. */ -void ata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; unsigned int words = buflen >> 1; /* Transfer multiple of 2 bytes */ - if (write_data) - iowrite16_rep(ap->ioaddr.data_addr, buf, words); + if (rw == READ) + ioread16_rep(data_addr, buf, words); else - ioread16_rep(ap->ioaddr.data_addr, buf, words); + iowrite16_rep(data_addr, buf, words); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; + __le16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - iowrite16(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); - } else { - align_buf[0] = cpu_to_le16(ioread16(ap->ioaddr.data_addr)); + if (rw == READ) { + align_buf[0] = cpu_to_le16(ioread16(data_addr)); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + iowrite16(le16_to_cpu(align_buf[0]), data_addr); } + words++; } + + return words << 1; } /** * ata_data_xfer_noirq - Transfer data by PIO - * @adev: device to target + * @dev: device to target * @buf: data buffer * @buflen: buffer length - * @write_data: read/write + * @rw: read/write * * Transfer data from/to the device data register by PIO. Do the * transfer with interrupts disabled. * * LOCKING: * Inherited from caller. + * + * RETURNS: + * Bytes consumed. */ -void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { unsigned long flags; + unsigned int consumed; + local_irq_save(flags); - ata_data_xfer(adev, buf, buflen, write_data); + consumed = ata_data_xfer(dev, buf, buflen, rw); local_irq_restore(flags); + + return consumed; } @@ -4810,7 +5024,6 @@ void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, static void ata_pio_sector(struct ata_queued_cmd *qc) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; struct ata_port *ap = qc->ap; struct page *page; unsigned int offset; @@ -4819,8 +5032,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) if (qc->curbytes == qc->nbytes - qc->sect_size) ap->hsm_task_state = HSM_ST_LAST; - page = sg[qc->cursg].page; - offset = sg[qc->cursg].offset + qc->cursg_ofs; + page = sg_page(qc->cursg); + offset = qc->cursg->offset + qc->cursg_ofs; /* get the current page and offset */ page = nth_page(page, (offset >> PAGE_SHIFT)); @@ -4848,8 +5061,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) qc->curbytes += qc->sect_size; qc->cursg_ofs += qc->sect_size; - if (qc->cursg_ofs == (&sg[qc->cursg])->length) { - qc->cursg++; + if (qc->cursg_ofs == qc->cursg->length) { + qc->cursg = sg_next(qc->cursg); qc->cursg_ofs = 0; } } @@ -4905,13 +5118,13 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) ata_altstatus(ap); /* flush */ switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: + case ATAPI_PROT_PIO: ap->hsm_task_state = HSM_ST; break; - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: ap->hsm_task_state = HSM_ST_LAST; break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: ap->hsm_task_state = HSM_ST_LAST; /* initiate bmdma */ ap->ops->bmdma_start(qc); @@ -4930,21 +5143,19 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) * Inherited from caller. * */ - -static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) +static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; struct ata_port *ap = qc->ap; + struct ata_eh_info *ehi = &qc->dev->link->eh_info; + struct scatterlist *sg; struct page *page; unsigned char *buf; unsigned int offset, count; - if (qc->curbytes + bytes >= qc->nbytes) - ap->hsm_task_state = HSM_ST_LAST; - next_sg: - if (unlikely(qc->cursg >= qc->n_elem)) { + sg = qc->cursg; + if (unlikely(!sg)) { /* * The end of qc->sg is reached and the device expects * more data to transfer. In order not to overrun qc->sg @@ -4953,23 +5164,30 @@ next_sg: * - for write case, padding zero data to the device */ u16 pad_buf[1] = { 0 }; - unsigned int words = bytes >> 1; unsigned int i; - if (words) /* warning if bytes > 1 */ - ata_dev_printk(qc->dev, KERN_WARNING, - "%u bytes trailing data\n", bytes); + if (bytes > qc->curbytes - qc->nbytes + ATAPI_MAX_DRAIN) { + ata_ehi_push_desc(ehi, "too much trailing data " + "buf=%u cur=%u bytes=%u", + qc->nbytes, qc->curbytes, bytes); + return -1; + } + + /* overflow is exptected for misc ATAPI commands */ + if (bytes && !atapi_qc_may_overflow(qc)) + ata_dev_printk(qc->dev, KERN_WARNING, "ATAPI %u bytes " + "trailing data (cdb=%02x nbytes=%u)\n", + bytes, qc->cdb[0], qc->nbytes); - for (i = 0; i < words; i++) - ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); + for (i = 0; i < (bytes + 1) / 2; i++) + ap->ops->data_xfer(qc->dev, (unsigned char *)pad_buf, 2, do_write); - ap->hsm_task_state = HSM_ST_LAST; - return; - } + qc->curbytes += bytes; - sg = &qc->__sg[qc->cursg]; + return 0; + } - page = sg->page; + page = sg_page(sg); offset = sg->offset + qc->cursg_ofs; /* get the current page and offset */ @@ -5002,16 +5220,20 @@ next_sg: } bytes -= count; + if ((count & 1) && bytes) + bytes--; qc->curbytes += count; qc->cursg_ofs += count; if (qc->cursg_ofs == sg->length) { - qc->cursg++; + qc->cursg = sg_next(qc->cursg); qc->cursg_ofs = 0; } if (bytes) goto next_sg; + + return 0; } /** @@ -5044,17 +5266,21 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) bytes = (bc_hi << 8) | bc_lo; /* shall be cleared to zero, indicating xfer of data */ - if (ireason & (1 << 0)) + if (unlikely(ireason & (1 << 0))) goto err_out; /* make sure transfer direction matches expected */ i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; - if (do_write != i_write) + if (unlikely(do_write != i_write)) + goto err_out; + + if (unlikely(!bytes)) goto err_out; VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); - __atapi_pio_bytes(qc, bytes); + if (__atapi_pio_bytes(qc, bytes)) + goto err_out; ata_altstatus(ap); /* flush */ return; @@ -5084,7 +5310,7 @@ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *q (qc->tf.flags & ATA_TFLAG_WRITE)) return 1; - if (is_atapi_taskfile(&qc->tf) && + if (ata_is_atapi(qc->tf.protocol) && !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) return 1; } @@ -5201,11 +5427,19 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device " - "error, dev_stat 0x%X\n", status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; + /* Some ATAPI tape drives forget to clear the ERR bit + * when doing the next command (mostly request sense). + * We ignore ERR here to workaround and proceed sending + * the CDB. + */ + if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { + ata_port_printk(ap, KERN_WARNING, + "DRQ=1 with device error, " + "dev_stat 0x%X\n", status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } } /* Send the CDB (atapi) or the first data block (ata pio out). @@ -5241,7 +5475,7 @@ fsm_start: case HSM_ST: /* complete command or read/write the data register */ - if (qc->tf.protocol == ATA_PROT_ATAPI) { + if (qc->tf.protocol == ATAPI_PROT_PIO) { /* ATAPI PIO protocol */ if ((status & ATA_DRQ) == 0) { /* No more data to transfer or device error. @@ -5399,7 +5633,7 @@ fsm_start: msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); + ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE); return; } } @@ -5540,6 +5774,22 @@ static void fill_result_tf(struct ata_queued_cmd *qc) ap->ops->tf_read(ap, &qc->result_tf); } +static void ata_verify_xfer(struct ata_queued_cmd *qc) +{ + struct ata_device *dev = qc->dev; + + if (ata_tag_internal(qc->tag)) + return; + + if (ata_is_nodata(qc->tf.protocol)) + return; + + if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol)) + return; + + dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER; +} + /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete @@ -5569,6 +5819,9 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * taken care of. */ if (ap->ops->error_handler) { + struct ata_device *dev = qc->dev; + struct ata_eh_info *ehi = &dev->link->eh_info; + WARN_ON(ap->pflags & ATA_PFLAG_FROZEN); if (unlikely(qc->err_mask)) @@ -5587,6 +5840,30 @@ void ata_qc_complete(struct ata_queued_cmd *qc) if (qc->flags & ATA_QCFLAG_RESULT_TF) fill_result_tf(qc); + /* Some commands need post-processing after successful + * completion. + */ + switch (qc->tf.command) { + case ATA_CMD_SET_FEATURES: + if (qc->tf.feature != SETFEATURES_WC_ON && + qc->tf.feature != SETFEATURES_WC_OFF) + break; + /* fall through */ + case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */ + case ATA_CMD_SET_MULTI: /* multi_count changed */ + /* revalidate device */ + ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(ap); + break; + + case ATA_CMD_SLEEP: + dev->flags |= ATA_DFLAG_SLEEPING; + break; + } + + if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) + ata_verify_xfer(qc); + __ata_qc_complete(qc); } else { if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) @@ -5649,30 +5926,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, return nr_done; } -static inline int ata_should_dma_map(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - switch (qc->tf.protocol) { - case ATA_PROT_NCQ: - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - return 1; - - case ATA_PROT_ATAPI: - case ATA_PROT_PIO: - if (ap->flags & ATA_FLAG_PIO_DMA) - return 1; - - /* fall through */ - - default: - return 0; - } - - /* never reached */ -} - /** * ata_qc_issue - issue taskfile to device * @qc: command to issue to device @@ -5689,6 +5942,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_link *link = qc->dev->link; + u8 prot = qc->tf.protocol; /* Make sure only one non-NCQ command is outstanding. The * check is skipped for old EH because it reuses active qc to @@ -5696,7 +5950,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) */ WARN_ON(ap->ops->error_handler && ata_tag_valid(link->active_tag)); - if (qc->tf.protocol == ATA_PROT_NCQ) { + if (ata_is_ncq(prot)) { WARN_ON(link->sactive & (1 << qc->tag)); if (!link->sactive) @@ -5712,16 +5966,25 @@ void ata_qc_issue(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_ACTIVE; ap->qc_active |= 1 << qc->tag; - if (ata_should_dma_map(qc)) { - if (qc->flags & ATA_QCFLAG_SG) { - if (ata_sg_setup(qc)) - goto sg_err; - } else if (qc->flags & ATA_QCFLAG_SINGLE) { - if (ata_sg_setup_one(qc)) - goto sg_err; - } - } else { - qc->flags &= ~ATA_QCFLAG_DMAMAP; + /* We guarantee to LLDs that they will have at least one + * non-zero sg if the command is a data command. + */ + BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes)); + + /* ata_sg_setup() may update nbytes */ + qc->raw_nbytes = qc->nbytes; + + if (ata_is_dma(prot) || (ata_is_pio(prot) && + (ap->flags & ATA_FLAG_PIO_DMA))) + if (ata_sg_setup(qc)) + goto sg_err; + + /* if device is sleeping, schedule softreset and abort the link */ + if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { + link->eh_info.action |= ATA_EH_SOFTRESET; + ata_ehi_push_desc(&link->eh_info, "waking up from sleep"); + ata_link_abort(link); + return; } ap->ops->qc_prep(qc); @@ -5732,7 +5995,6 @@ void ata_qc_issue(struct ata_queued_cmd *qc) return; sg_err: - qc->flags &= ~ATA_QCFLAG_DMAMAP; qc->err_mask |= AC_ERR_SYSTEM; err: ata_qc_complete(qc); @@ -5767,11 +6029,11 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) switch (qc->tf.protocol) { case ATA_PROT_PIO: case ATA_PROT_NODATA: - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: qc->tf.flags |= ATA_TFLAG_POLLING; break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: if (qc->dev->flags & ATA_DFLAG_CDB_INTR) /* see ata_dma_blacklisted() */ BUG(); @@ -5794,7 +6056,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_LAST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; @@ -5816,7 +6078,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_WRITE) { /* PIO data out protocol */ ap->hsm_task_state = HSM_ST_FIRST; - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); /* always send first data block using * the ata_pio_task() codepath. @@ -5826,7 +6088,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); /* if polling, ata_pio_task() handles the rest. * otherwise, interrupt handler takes over from here. @@ -5835,8 +6097,8 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: if (qc->tf.flags & ATA_TFLAG_POLLING) ata_qc_set_polling(qc); @@ -5847,10 +6109,10 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ @@ -5859,7 +6121,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; default: @@ -5886,8 +6148,8 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) * One if interrupt was handled, zero if not (shared irq). */ -inline unsigned int ata_host_intr (struct ata_port *ap, - struct ata_queued_cmd *qc) +inline unsigned int ata_host_intr(struct ata_port *ap, + struct ata_queued_cmd *qc) { struct ata_eh_info *ehi = &ap->link.eh_info; u8 status, host_stat = 0; @@ -5903,15 +6165,15 @@ inline unsigned int ata_host_intr (struct ata_port *ap, */ /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto idle_irq; break; case HSM_ST_LAST: if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + qc->tf.protocol == ATAPI_PROT_DMA) { /* check status of DMA engine */ host_stat = ap->ops->bmdma_status(ap); VPRINTK("ata%u: host_stat 0x%X\n", @@ -5953,7 +6215,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, ata_hsm_move(ap, qc, status, 0); if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) + qc->tf.protocol == ATAPI_PROT_DMA)) ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); return 1; /* irq handled */ @@ -5987,7 +6249,7 @@ idle_irq: * IRQ_NONE or IRQ_HANDLED. */ -irqreturn_t ata_interrupt (int irq, void *dev_instance) +irqreturn_t ata_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; unsigned int i; @@ -6190,7 +6452,7 @@ int ata_flush_cache(struct ata_device *dev) /* This is wrong. On a failed flush we get back the LBA of the lost sector and we should (assuming it wasn't aborted as unknown) issue - a further flush command to continue the writeback until it + a further flush command to continue the writeback until it does not error */ err_mask = ata_do_simple_cmd(dev, cmd); if (err_mask) { @@ -6271,6 +6533,12 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) { int rc; + /* + * disable link pm on all ports before requesting + * any pm activity + */ + ata_lpm_enable(host); + rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); if (rc == 0) host->dev->power.power_state = mesg; @@ -6293,6 +6561,9 @@ void ata_host_resume(struct ata_host *host) ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET, ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); host->dev->power.power_state = PMSG_ON; + + /* reenable link pm */ + ata_lpm_disable(host); } #endif @@ -6466,7 +6737,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; #endif - INIT_DELAYED_WORK(&ap->port_task, NULL); + INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); INIT_LIST_HEAD(&ap->eh_done_q); @@ -6497,19 +6768,6 @@ static void ata_host_release(struct device *gendev, void *res) if (!ap) continue; - if ((host->flags & ATA_HOST_STARTED) && ap->ops->port_stop) - ap->ops->port_stop(ap); - } - - if ((host->flags & ATA_HOST_STARTED) && host->ops->host_stop) - host->ops->host_stop(host); - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - - if (!ap) - continue; - if (ap->scsi_host) scsi_host_put(ap->scsi_host); @@ -6636,6 +6894,24 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev, return host; } +static void ata_host_stop(struct device *gendev, void *res) +{ + struct ata_host *host = dev_get_drvdata(gendev); + int i; + + WARN_ON(!(host->flags & ATA_HOST_STARTED)); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (ap->ops->port_stop) + ap->ops->port_stop(ap); + } + + if (host->ops->host_stop) + host->ops->host_stop(host); +} + /** * ata_host_start - start and freeze ports of an ATA host * @host: ATA host to start ports for @@ -6654,6 +6930,8 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev, */ int ata_host_start(struct ata_host *host) { + int have_stop = 0; + void *start_dr = NULL; int i, rc; if (host->flags & ATA_HOST_STARTED) @@ -6665,18 +6943,37 @@ int ata_host_start(struct ata_host *host) if (!host->ops && !ata_port_is_dummy(ap)) host->ops = ap->ops; + if (ap->ops->port_stop) + have_stop = 1; + } + + if (host->ops->host_stop) + have_stop = 1; + + if (have_stop) { + start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL); + if (!start_dr) + return -ENOMEM; + } + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + if (ap->ops->port_start) { rc = ap->ops->port_start(ap); if (rc) { - ata_port_printk(ap, KERN_ERR, "failed to " - "start port (errno=%d)\n", rc); + if (rc != -ENODEV) + dev_printk(KERN_ERR, host->dev, + "failed to start port %d " + "(errno=%d)\n", i, rc); goto err_out; } } - ata_eh_freeze_port(ap); } + if (start_dr) + devres_add(host->dev, start_dr); host->flags |= ATA_HOST_STARTED; return 0; @@ -6687,6 +6984,7 @@ int ata_host_start(struct ata_host *host) if (ap->ops->port_stop) ap->ops->port_stop(ap); } + devres_free(start_dr); return rc; } @@ -6773,13 +7071,14 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, ap->udma_mask); - if (!ata_port_is_dummy(ap)) + if (!ata_port_is_dummy(ap)) { ata_port_printk(ap, KERN_INFO, "%cATA max %s %s\n", (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', ata_mode_string(xfer_mask), ap->link.eh_info.desc); - else + ata_ehi_clear_desc(&ap->link.eh_info); + } else ata_port_printk(ap, KERN_INFO, "DUMMY\n"); } @@ -6834,6 +7133,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) struct ata_port *ap = host->ports[i]; ata_scsi_scan_host(ap, 1); + ata_lpm_schedule(ap, ap->pm_policy); } return 0; @@ -6852,6 +7152,10 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) * request IRQ and register it. This helper takes necessasry * arguments and performs the three steps in one go. * + * An invalid IRQ skips the IRQ registration and expects the host to + * have set polling mode on the port. In this case, @irq_handler + * should be NULL. + * * LOCKING: * Inherited from calling layer (may sleep). * @@ -6868,6 +7172,12 @@ int ata_host_activate(struct ata_host *host, int irq, if (rc) return rc; + /* Special case for polling mode */ + if (!irq) { + WARN_ON(irq_handler); + return ata_host_register(host, sht); + } + rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags, dev_driver_string(host->dev), host); if (rc) @@ -6895,7 +7205,7 @@ int ata_host_activate(struct ata_host *host, int irq, * LOCKING: * Kernel thread context (may sleep). */ -void ata_port_detach(struct ata_port *ap) +static void ata_port_detach(struct ata_port *ap) { unsigned long flags; struct ata_link *link; @@ -6911,18 +7221,14 @@ void ata_port_detach(struct ata_port *ap) ata_port_wait_eh(ap); - /* EH is now guaranteed to see UNLOADING, so no new device - * will be attached. Disable all existing devices. + /* EH is now guaranteed to see UNLOADING - EH context belongs + * to us. Disable all existing devices. */ - spin_lock_irqsave(ap->lock, flags); - ata_port_for_each_link(link, ap) { ata_link_for_each_dev(dev, link) ata_dev_disable(dev); } - spin_unlock_irqrestore(ap->lock, flags); - /* Final freeze & EH. All in-flight commands are aborted. EH * will be skipped and retrials will be terminated with bad * target. @@ -6954,6 +7260,9 @@ void ata_host_detach(struct ata_host *host) for (i = 0; i < host->n_ports; i++) ata_port_detach(host->ports[i]); + + /* the host is dead now, dissociate ACPI */ + ata_acpi_dissociate(host); } /** @@ -6998,7 +7307,7 @@ void ata_std_ports(struct ata_ioports *ioaddr) */ void ata_pci_remove_one(struct pci_dev *pdev) { - struct device *dev = pci_dev_to_dev(pdev); + struct device *dev = &pdev->dev; struct ata_host *host = dev_get_drvdata(dev); ata_host_detach(host); @@ -7230,7 +7539,6 @@ const struct ata_port_info ata_dummy_port_info = { * likely to change as new drivers are added and updated. * Do not depend on ABI/API stability. */ - EXPORT_SYMBOL_GPL(sata_deb_timing_normal); EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); EXPORT_SYMBOL_GPL(sata_deb_timing_long); @@ -7246,7 +7554,6 @@ EXPORT_SYMBOL_GPL(ata_host_register); EXPORT_SYMBOL_GPL(ata_host_activate); EXPORT_SYMBOL_GPL(ata_host_detach); EXPORT_SYMBOL_GPL(ata_sg_init); -EXPORT_SYMBOL_GPL(ata_sg_init_one); EXPORT_SYMBOL_GPL(ata_hsm_move); EXPORT_SYMBOL_GPL(ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); @@ -7258,6 +7565,13 @@ EXPORT_SYMBOL_GPL(ata_std_dev_select); EXPORT_SYMBOL_GPL(sata_print_link_status); EXPORT_SYMBOL_GPL(ata_tf_to_fis); EXPORT_SYMBOL_GPL(ata_tf_from_fis); +EXPORT_SYMBOL_GPL(ata_pack_xfermask); +EXPORT_SYMBOL_GPL(ata_unpack_xfermask); +EXPORT_SYMBOL_GPL(ata_xfer_mask2mode); +EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); +EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); +EXPORT_SYMBOL_GPL(ata_mode_string); +EXPORT_SYMBOL_GPL(ata_id_xfermask); EXPORT_SYMBOL_GPL(ata_check_status); EXPORT_SYMBOL_GPL(ata_altstatus); EXPORT_SYMBOL_GPL(ata_exec_command); @@ -7286,8 +7600,6 @@ EXPORT_SYMBOL_GPL(ata_dev_disable); EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(sata_link_debounce); EXPORT_SYMBOL_GPL(sata_link_resume); -EXPORT_SYMBOL_GPL(sata_phy_reset); -EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); @@ -7300,8 +7612,8 @@ EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_wait_after_reset); EXPORT_SYMBOL_GPL(ata_wait_ready); -EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); @@ -7320,18 +7632,20 @@ EXPORT_SYMBOL_GPL(ata_host_resume); #endif /* CONFIG_PM */ EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); -EXPORT_SYMBOL_GPL(ata_id_to_dma_mode); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); +EXPORT_SYMBOL_GPL(ata_timing_find_mode); EXPORT_SYMBOL_GPL(ata_timing_compute); EXPORT_SYMBOL_GPL(ata_timing_merge); +EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_init_sff_host); EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host); +EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM @@ -7345,9 +7659,6 @@ EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch); -EXPORT_SYMBOL_GPL(sata_pmp_read_init_tf); -EXPORT_SYMBOL_GPL(sata_pmp_read_val); -EXPORT_SYMBOL_GPL(sata_pmp_write_init_tf); EXPORT_SYMBOL_GPL(sata_pmp_std_prereset); EXPORT_SYMBOL_GPL(sata_pmp_std_hardreset); EXPORT_SYMBOL_GPL(sata_pmp_std_postreset); @@ -7360,7 +7671,6 @@ EXPORT_SYMBOL_GPL(ata_port_desc); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(ata_port_pbar_desc); #endif /* CONFIG_PCI */ -EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); EXPORT_SYMBOL_GPL(ata_link_abort); EXPORT_SYMBOL_GPL(ata_port_abort); @@ -7377,4 +7687,5 @@ EXPORT_SYMBOL_GPL(ata_dev_try_classify); EXPORT_SYMBOL_GPL(ata_cable_40wire); EXPORT_SYMBOL_GPL(ata_cable_80wire); EXPORT_SYMBOL_GPL(ata_cable_unknown); +EXPORT_SYMBOL_GPL(ata_cable_ignore); EXPORT_SYMBOL_GPL(ata_cable_sata);