X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fata%2Fata_piix.c;h=942d14ac87924973c0574b502d4d3dffbc0bd3e0;hb=c361acbc59c434315f8649ab06e5b7d5b297d1b7;hp=e113f2f802756eaca17d481e1feb5f6ccf09053b;hpb=9c0bf675054883acd10dec99c0c854514e139f06;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index e113f2f..942d14a 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -14,7 +14,7 @@ * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick - * Copyright (C) 2003 Red Hat Inc + * Copyright (C) 2003 Red Hat Inc * * * This program is free software; you can redistribute it and/or modify @@ -154,21 +154,23 @@ struct piix_map_db { struct piix_host_priv { const int *map; + u32 saved_iocfg; void __iomem *sidpr; }; static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static void piix_remove_one(struct pci_dev *pdev); static int piix_pata_prereset(struct ata_link *link, unsigned long deadline); static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev); static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev); static int ich_pata_cable_detect(struct ata_port *ap); static u8 piix_vmw_bmdma_status(struct ata_port *ap); -static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); -static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val); -static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val); +static int piix_sidpr_scr_read(struct ata_link *link, + unsigned int reg, u32 *val); +static int piix_sidpr_scr_write(struct ata_link *link, + unsigned int reg, u32 val); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int piix_pci_device_resume(struct pci_dev *pdev); @@ -249,10 +251,12 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller 2 IDE (ICH8) */ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, - /* Mobile SATA Controller IDE (ICH8M) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* Mobile SATA Controller IDE (ICH8M), Apple */ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata }, + /* Mobile SATA Controller IDE (ICH8M) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ @@ -275,7 +279,18 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH10) */ { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, - + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, { } /* terminate list */ }; @@ -283,7 +298,7 @@ static struct pci_driver piix_pci_driver = { .name = DRV_NAME, .id_table = piix_pci_tbl, .probe = piix_init_one, - .remove = ata_pci_remove_one, + .remove = piix_remove_one, #ifdef CONFIG_PM .suspend = piix_pci_device_suspend, .resume = piix_pci_device_resume, @@ -295,7 +310,7 @@ static struct scsi_host_template piix_sht = { }; static struct ata_port_operations piix_pata_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &ata_bmdma32_port_ops, .cable_detect = ata_cable_40wire, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, @@ -319,7 +334,7 @@ static struct ata_port_operations piix_sata_ops = { static struct ata_port_operations piix_sidpr_sata_ops = { .inherits = &piix_sata_ops, - .hardreset = piix_sidpr_hardreset, + .hardreset = sata_std_hardreset, .scr_read = piix_sidpr_scr_read, .scr_write = piix_sidpr_scr_write, }; @@ -431,34 +446,34 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_mwdma] = /* PIIX3 MWDMA only */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ .port_ops = &piix_pata_ops, }, [piix_pata_33] = /* PIIX4 at 33MHz */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .udma_mask = ATA_UDMA_MASK_40C, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, .port_ops = &piix_pata_ops, }, [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* Check: maybe 0x07 */ - .udma_mask = ATA_UDMA2, /* UDMA33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* Check: maybe MWDMA0 is ok */ + .udma_mask = ATA_UDMA2, .port_ops = &ich_pata_ops, }, [ich_pata_66] = /* ICH controllers up to 66MHz */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* MWDMA0 is broken on chip */ .udma_mask = ATA_UDMA4, .port_ops = &ich_pata_ops, }, @@ -466,17 +481,17 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_100] = { .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, .port_ops = &ich_pata_ops, }, [ich5_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -484,8 +499,8 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -493,8 +508,8 @@ static struct ata_port_info piix_port_info[] = { [ich6m_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -502,8 +517,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_sata] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -511,8 +526,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_2port_sata] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -520,17 +535,17 @@ static struct ata_port_info piix_port_info[] = { [tolapai_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, [ich8m_apple_sata] = { - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .flags = PIIX_SATA_FLAGS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -538,9 +553,9 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_vmw] = { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .udma_mask = ATA_UDMA_MASK_40C, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, .port_ops = &piix_vmw_ops, }, @@ -574,7 +589,11 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ + { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ + { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ + { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ + { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ /* end marker */ { 0, } }; @@ -593,8 +612,9 @@ static const struct ich_laptop ich_laptop[] = { static int ich_pata_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct piix_host_priv *hpriv = ap->host->private_data; const struct ich_laptop *lap = &ich_laptop[0]; - u8 tmp, mask; + u8 mask; /* Check for specials - Acer Aspire 5602WLMi */ while (lap->device) { @@ -608,8 +628,7 @@ static int ich_pata_cable_detect(struct ata_port *ap) /* check BIOS cable detect results */ mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; - pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); - if ((tmp & mask) == 0) + if ((hpriv->saved_iocfg & mask) == 0) return ATA_CBL_PATA40; return ATA_CBL_PATA80; } @@ -629,7 +648,7 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline) if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(link, deadline); + return ata_sff_prereset(link, deadline); } /** @@ -721,7 +740,6 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) * do_pata_set_dmamode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Drive in question - * @udma: udma mode, 0 - 6 * @isich: set if the chip is an ICH device * * Set UDMA mode for device, in host controller PCI config space. @@ -874,23 +892,9 @@ static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev) * Serial ATA Index/Data Pair Superset Registers access * * Beginning from ICH8, there's a sane way to access SCRs using index - * and data register pair located at BAR5. This creates an - * interesting problem of mapping two SCRs to one port. - * - * Although they have separate SCRs, the master and slave aren't - * independent enough to be treated as separate links - e.g. softreset - * resets both. Also, there's no protocol defined for hard resetting - * singled device sharing the virtual port (no defined way to acquire - * device signature). This is worked around by merging the SCR values - * into one sensible value and requesting follow-up SRST after - * hardreset. - * - * SCR merging is perfomed in nibbles which is the unit contents in - * SCRs are organized. If two values are equal, the value is used. - * When they differ, merge table which lists precedence of possible - * values is consulted and the first match or the last entry when - * nothing matches is used. When there's no merge table for the - * specific nibble, value from the first port is used. + * and data register pair located at BAR5 which means that we have + * separate SCRs for master and slave. This is handled using libata + * slave_link facility. */ static const int piix_sidx_map[] = { [SCR_STATUS] = 0, @@ -898,146 +902,41 @@ static const int piix_sidx_map[] = { [SCR_CONTROL] = 1, }; -static void piix_sidpr_sel(struct ata_device *dev, unsigned int reg) +static void piix_sidpr_sel(struct ata_link *link, unsigned int reg) { - struct ata_port *ap = dev->link->ap; + struct ata_port *ap = link->ap; struct piix_host_priv *hpriv = ap->host->private_data; - iowrite32(((ap->port_no * 2 + dev->devno) << 8) | piix_sidx_map[reg], + iowrite32(((ap->port_no * 2 + link->pmp) << 8) | piix_sidx_map[reg], hpriv->sidpr + PIIX_SIDPR_IDX); } -static int piix_sidpr_read(struct ata_device *dev, unsigned int reg) -{ - struct piix_host_priv *hpriv = dev->link->ap->host->private_data; - - piix_sidpr_sel(dev, reg); - return ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); -} - -static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val) +static int piix_sidpr_scr_read(struct ata_link *link, + unsigned int reg, u32 *val) { - struct piix_host_priv *hpriv = dev->link->ap->host->private_data; - - piix_sidpr_sel(dev, reg); - iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); -} - -static u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl) -{ - u32 val = 0; - int i, mi; - - for (i = 0, mi = 0; i < 32 / 4; i++) { - u8 c0 = (val0 >> (i * 4)) & 0xf; - u8 c1 = (val1 >> (i * 4)) & 0xf; - u8 merged = c0; - const int *cur; - - /* if no merge preference, assume the first value */ - cur = merge_tbl[mi]; - if (!cur) - goto done; - mi++; - - /* if two values equal, use it */ - if (c0 == c1) - goto done; - - /* choose the first match or the last from the merge table */ - while (*cur != -1) { - if (c0 == *cur || c1 == *cur) - break; - cur++; - } - if (*cur == -1) - cur--; - merged = *cur; - done: - val |= merged << (i * 4); - } - - return val; -} - -static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val) -{ - const int * const sstatus_merge_tbl[] = { - /* DET */ (const int []){ 1, 3, 0, 4, 3, -1 }, - /* SPD */ (const int []){ 2, 1, 0, -1 }, - /* IPM */ (const int []){ 6, 2, 1, 0, -1 }, - NULL, - }; - const int * const scontrol_merge_tbl[] = { - /* DET */ (const int []){ 1, 0, 4, 0, -1 }, - /* SPD */ (const int []){ 0, 2, 1, 0, -1 }, - /* IPM */ (const int []){ 0, 1, 2, 3, 0, -1 }, - NULL, - }; - u32 v0, v1; + struct piix_host_priv *hpriv = link->ap->host->private_data; if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; - if (!(ap->flags & ATA_FLAG_SLAVE_POSS)) { - *val = piix_sidpr_read(&ap->link.device[0], reg); - return 0; - } - - v0 = piix_sidpr_read(&ap->link.device[0], reg); - v1 = piix_sidpr_read(&ap->link.device[1], reg); - - switch (reg) { - case SCR_STATUS: - *val = piix_merge_scr(v0, v1, sstatus_merge_tbl); - break; - case SCR_ERROR: - *val = v0 | v1; - break; - case SCR_CONTROL: - *val = piix_merge_scr(v0, v1, scontrol_merge_tbl); - break; - } - + piix_sidpr_sel(link, reg); + *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); return 0; } -static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val) +static int piix_sidpr_scr_write(struct ata_link *link, + unsigned int reg, u32 val) { + struct piix_host_priv *hpriv = link->ap->host->private_data; + if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; - piix_sidpr_write(&ap->link.device[0], reg, val); - - if (ap->flags & ATA_FLAG_SLAVE_POSS) - piix_sidpr_write(&ap->link.device[1], reg, val); - + piix_sidpr_sel(link, reg); + iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); return 0; } -static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); - int rc; - - /* do hardreset */ - rc = sata_link_hardreset(link, timing, deadline); - if (rc) { - ata_link_printk(link, KERN_ERR, - "COMRESET failed (errno=%d)\n", rc); - return rc; - } - - /* TODO: phy layer with polling, timeouts, etc. */ - if (ata_link_offline(link)) { - *class = ATA_DEV_NONE; - return 0; - } - - return -EAGAIN; -} - #ifdef CONFIG_PM static int piix_broken_suspend(void) { @@ -1064,6 +963,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "TECRA M4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"), + }, + }, + { .ident = "TECRA M5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), @@ -1147,6 +1053,13 @@ static int piix_broken_suspend(void) DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"), }, }, + { + .ident = "VGN-BX297XP", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-BX297XP"), + }, + }, { } /* terminate list */ }; @@ -1162,6 +1075,21 @@ static int piix_broken_suspend(void) if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL)) return 1; + /* TECRA M4 sometimes forgets its identify and reports bogus + * DMI information. As the bogus information is a bit + * generic, match as many entries as possible. This manual + * matching is necessary because dmi_system_id.matches is + * limited to four entries. + */ + if (dmi_match(DMI_SYS_VENDOR, "TOSHIBA") && + dmi_match(DMI_PRODUCT_NAME, "000000") && + dmi_match(DMI_PRODUCT_VERSION, "000000") && + dmi_match(DMI_PRODUCT_SERIAL, "000000") && + dmi_match(DMI_BOARD_VENDOR, "TOSHIBA") && + dmi_match(DMI_BOARD_NAME, "Portable PC") && + dmi_match(DMI_BOARD_VERSION, "Version A0")) + return 1; + return 0; } @@ -1368,33 +1296,107 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev, return map; } -static void __devinit piix_init_sidpr(struct ata_host *host) +static bool piix_no_sidpr(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* + * Samsung DB-P70 only has three ATA ports exposed and + * curiously the unconnected first port reports link online + * while not responding to SRST protocol causing excessive + * detection delay. + * + * Unfortunately, the system doesn't carry enough DMI + * information to identify the machine but does have subsystem + * vendor and device set. As it's unclear whether the + * subsystem vendor/device is used only for this specific + * board, the port can't be disabled solely with the + * information; however, turning off SIDPR access works around + * the problem. Turn it off. + * + * This problem is reported in bnc#441240. + * + * https://bugzilla.novell.com/show_bug.cgi?id=441420 + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 && + pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG && + pdev->subsystem_device == 0xb049) { + dev_printk(KERN_WARNING, host->dev, + "Samsung DB-P70 detected, disabling SIDPR\n"); + return true; + } + + return false; +} + +static int __devinit piix_init_sidpr(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); struct piix_host_priv *hpriv = host->private_data; - int i; + struct ata_link *link0 = &host->ports[0]->link; + u32 scontrol; + int i, rc; /* check for availability */ for (i = 0; i < 4; i++) if (hpriv->map[i] == IDE) - return; + return 0; + + /* is it blacklisted? */ + if (piix_no_sidpr(host)) + return 0; if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR)) - return; + return 0; if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 || pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN) - return; + return 0; if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME)) - return; + return 0; hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR]; - host->ports[0]->ops = &piix_sidpr_sata_ops; - host->ports[1]->ops = &piix_sidpr_sata_ops; + + /* SCR access via SIDPR doesn't work on some configurations. + * Give it a test drive by inhibiting power save modes which + * we'll do anyway. + */ + piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol); + + /* if IPM is already 3, SCR access is probably working. Don't + * un-inhibit power save modes as BIOS might have inhibited + * them for a reason. + */ + if ((scontrol & 0xf00) != 0x300) { + scontrol |= 0x300; + piix_sidpr_scr_write(link0, SCR_CONTROL, scontrol); + piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol); + + if ((scontrol & 0xf00) != 0x300) { + dev_printk(KERN_INFO, host->dev, "SCR access via " + "SIDPR is available but doesn't work\n"); + return 0; + } + } + + /* okay, SCRs available, set ops and ask libata for slave_link */ + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + ap->ops = &piix_sidpr_sata_ops; + + if (ap->flags & ATA_FLAG_SLAVE_POSS) { + rc = ata_slave_link_init(ap); + if (rc) + return rc; + } + } + + return 0; } -static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) +static void piix_iocfg_bit18_quirk(struct ata_host *host) { static const struct dmi_system_id sysids[] = { { @@ -1411,7 +1413,8 @@ static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) { } /* terminate list */ }; - u32 iocfg; + struct pci_dev *pdev = to_pci_dev(host->dev); + struct piix_host_priv *hpriv = host->private_data; if (!dmi_check_system(sysids)) return; @@ -1420,13 +1423,38 @@ static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) * seem to use it to disable a channel. Clear the bit on the * affected systems. */ - pci_read_config_dword(pdev, PIIX_IOCFG, &iocfg); - if (iocfg & (1 << 18)) { + if (hpriv->saved_iocfg & (1 << 18)) { dev_printk(KERN_INFO, &pdev->dev, "applying IOCFG bit18 quirk\n"); - iocfg &= ~(1 << 18); - pci_write_config_dword(pdev, PIIX_IOCFG, iocfg); + pci_write_config_dword(pdev, PIIX_IOCFG, + hpriv->saved_iocfg & ~(1 << 18)); + } +} + +static bool piix_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq 2510p", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); } + + return false; } /** @@ -1464,6 +1492,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev, if (!in_module_init) return -ENODEV; + if (piix_broken_system_poweroff(pdev)) { + piix_port_info[ent->driver_data].flags |= + ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + port_info[0] = piix_port_info[ent->driver_data]; port_info[1] = piix_port_info[ent->driver_data]; @@ -1474,26 +1510,33 @@ static int __devinit piix_init_one(struct pci_dev *pdev, if (rc) return rc; + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + + /* Save IOCFG, this will be used for cable detection, quirk + * detection and restoration on detach. This is necessary + * because some ACPI implementations mess up cable related + * bits on _STM. Reported on kernel bz#11879. + */ + pci_read_config_dword(pdev, PIIX_IOCFG, &hpriv->saved_iocfg); + /* ICH6R may be driven by either ata_piix or ahci driver * regardless of BIOS configuration. Make sure AHCI mode is * off. */ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) { - int rc = piix_disable_ahci(pdev); + rc = piix_disable_ahci(pdev); if (rc) return rc; } /* SATA map init can change port_info, do it before prepping host */ - hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) - return -ENOMEM; - if (port_flags & ATA_FLAG_SATA) hpriv->map = piix_init_sata_map(pdev, port_info, piix_map_db_table[ent->driver_data]); - rc = ata_pci_prepare_sff_host(pdev, ppi, &host); + rc = ata_pci_sff_prepare_host(pdev, ppi, &host); if (rc) return rc; host->private_data = hpriv; @@ -1501,11 +1544,13 @@ static int __devinit piix_init_one(struct pci_dev *pdev, /* initialize controller */ if (port_flags & ATA_FLAG_SATA) { piix_init_pcs(host, piix_map_db_table[ent->driver_data]); - piix_init_sidpr(host); + rc = piix_init_sidpr(host); + if (rc) + return rc; } /* apply IOCFG bit18 quirk */ - piix_iocfg_bit18_quirk(pdev); + piix_iocfg_bit18_quirk(host); /* On ICH5, some BIOSen disable the interrupt using the * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. @@ -1527,7 +1572,17 @@ static int __devinit piix_init_one(struct pci_dev *pdev, } pci_set_master(pdev); - return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht); + return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht); +} + +static void piix_remove_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct piix_host_priv *hpriv = host->private_data; + + pci_write_config_dword(pdev, PIIX_IOCFG, hpriv->saved_iocfg); + + ata_pci_remove_one(pdev); } static int __init piix_init(void)