X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fx86_64%2FKconfig;h=02dd39457bcf20cfb487dc1d34833427d714cce3;hb=2eb1b12049844a8ebc670e0e4fc908bc3f8933d3;hp=fc75275d8c72af72f055daa0d2f936b52dd5eead;hpb=a32073bffc656ca4bde6002b6cf7c1a8e0e22712;p=safe%2Fjmp%2Flinux-2.6 diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index fc75275..02dd394 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -24,6 +24,18 @@ config X86 bool default y +config ZONE_DMA32 + bool + default y + +config LOCKDEP_SUPPORT + bool + default y + +config STACKTRACE_SUPPORT + bool + default y + config SEMAPHORE_SLEEPERS bool default y @@ -32,6 +44,10 @@ config MMU bool default y +config ZONE_DMA + bool + default y + config ISA bool @@ -73,10 +89,30 @@ config ARCH_MAY_HAVE_PC_FDC bool default y +config ARCH_POPULATES_NODE_MAP + def_bool y + config DMI bool default y +config AUDIT_ARCH + bool + default y + +config GENERIC_BUG + bool + default y + depends on BUG + +config ARCH_HAS_ILOG2_U32 + bool + default n + +config ARCH_HAS_ILOG2_U64 + bool + default n + source "init/Kconfig" @@ -93,6 +129,7 @@ config X86_PC config X86_VSMP bool "Support for ScaleMP vSMP" + depends on PCI help Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -102,7 +139,7 @@ endchoice choice prompt "Processor family" - default MK8 + default GENERIC_CPU config MK8 bool "AMD-Opteron/Athlon64" @@ -110,16 +147,31 @@ config MK8 Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs. config MPSC - bool "Intel EM64T" + bool "Intel P4 / older Netburst based Xeon" help - Optimize for Intel Pentium 4 and Xeon CPUs with Intel - Extended Memory 64 Technology(EM64T). For details see + Optimize for Intel Pentium 4 and older Nocona/Dempsey Xeon CPUs + with Intel Extended Memory 64 Technology(EM64T). For details see . + Note the the latest Xeons (Xeon 51xx and 53xx) are not based on the + Netburst core and shouldn't use this option. You can distingush them + using the cpu family field + in /proc/cpuinfo. Family 15 is a older Xeon, Family 6 a newer one + (this rule only applies to system that support EM64T) + +config MCORE2 + bool "Intel Core2 / newer Xeon" + help + Optimize for Intel Core2 and newer Xeons (51xx) + You can distingush the newer Xeons from the older ones using + the cpu family field in /proc/cpuinfo. 15 is a older Xeon + (use CONFIG_MPSC then), 6 is a newer one. This rule only + applies to CPUs that support EM64T. config GENERIC_CPU bool "Generic-x86-64" help Generic x86-64 CPU. + Run equally well on all x86-64 CPUs. endchoice @@ -129,12 +181,12 @@ endchoice config X86_L1_CACHE_BYTES int default "128" if GENERIC_CPU || MPSC - default "64" if MK8 + default "64" if MK8 || MCORE2 config X86_L1_CACHE_SHIFT int default "7" if GENERIC_CPU || MPSC - default "6" if MK8 + default "6" if MK8 || MCORE2 config X86_INTERNODE_CACHE_BYTES int @@ -151,6 +203,7 @@ config X86_GOOD_APIC config MICROCODE tristate "/dev/cpu/microcode - Intel CPU microcode support" + select FW_LOADER ---help--- If you say Y here the 'File systems' section, you will be able to update the microcode on Intel processors. You will @@ -166,6 +219,11 @@ config MICROCODE If you use modprobe or kmod you may also want to add the line 'alias char-major-10-184 microcode' to your /etc/modules.conf file. +config MICROCODE_OLD_INTERFACE + bool + depends on MICROCODE + default y + config X86_MSR tristate "/dev/cpu/*/msr - Model-specific register support" help @@ -279,12 +337,12 @@ config NUMA config K8_NUMA bool "Old style AMD Opteron NUMA detection" - depends on NUMA + depends on NUMA && PCI default y help Enable K8 NUMA node topology detection. You should say Y here if you have a multi processor AMD K8 system. This uses an old - method to read the NUMA configurtion directly from the builtin + method to read the NUMA configuration directly from the builtin Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA instead, which also takes priority if both are compiled in. @@ -318,11 +376,6 @@ config ARCH_DISCONTIGMEM_ENABLE depends on NUMA default y - -config ARCH_DISCONTIGMEM_ENABLE - def_bool y - depends on NUMA - config ARCH_DISCONTIGMEM_DEFAULT def_bool y depends on NUMA @@ -341,6 +394,10 @@ config ARCH_FLATMEM_ENABLE source "mm/Kconfig" +config MEMORY_HOTPLUG_RESERVE + def_bool y + depends on (MEMORY_HOTPLUG && DISCONTIGMEM) + config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NUMA @@ -370,6 +427,8 @@ config HOTPLUG_CPU can be controlled through /sys/devices/system/cpu/cpu#. Say N if you want to disable CPU hotplug. +config ARCH_ENABLE_MEMORY_HOTPLUG + def_bool y config HPET_TIMER bool @@ -386,24 +445,55 @@ config HPET_EMULATE_RTC bool "Provide RTC interrupt" depends on HPET_TIMER && RTC=y -config GART_IOMMU - bool "K8 GART IOMMU support" +# Mark as embedded because too many people got it wrong. +# The code disables itself when not needed. +config IOMMU + bool "IOMMU support" if EMBEDDED default y select SWIOTLB select AGP depends on PCI help - Support for hardware IOMMU in AMD's Opteron/Athlon64 Processors - and for the bounce buffering software IOMMU. - Needed to run systems with more than 3GB of memory properly with - 32-bit PCI devices that do not support DAC (Double Address Cycle). - The IOMMU can be turned off at runtime with the iommu=off parameter. - Normally the kernel will take the right choice by itself. - This option includes a driver for the AMD Opteron/Athlon64 IOMMU - northbridge and a software emulation used on other systems without - hardware IOMMU. If unsure, say Y. - -# need this always selected by GART_IOMMU for the VIA workaround + Support for full DMA access of devices with 32bit memory access only + on systems with more than 3GB. This is usually needed for USB, + sound, many IDE/SATA chipsets and some other devices. + Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART + based IOMMU and a software bounce buffer based IOMMU used on Intel + systems and as fallback. + The code is only active when needed (enough memory and limited + device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified + too. + +config CALGARY_IOMMU + bool "IBM Calgary IOMMU support" + select SWIOTLB + depends on PCI && EXPERIMENTAL + help + Support for hardware IOMMUs in IBM's xSeries x366 and x460 + systems. Needed to run systems with more than 3GB of memory + properly with 32-bit PCI devices that do not support DAC + (Double Address Cycle). Calgary also supports bus level + isolation, where all DMAs pass through the IOMMU. This + prevents them from going anywhere except their intended + destination. This catches hard-to-find kernel bugs and + mis-behaving drivers and devices that do not use the DMA-API + properly to set up their DMA buffers. The IOMMU can be + turned off at boot time with the iommu=off parameter. + Normally the kernel will make the right choice by itself. + If unsure, say Y. + +config CALGARY_IOMMU_ENABLED_BY_DEFAULT + bool "Should Calgary be enabled by default?" + default y + depends on CALGARY_IOMMU + help + Should Calgary be enabled by default? if you choose 'y', Calgary + will be used (if it exists). If you choose 'n', Calgary will not be + used even if it exists. If you choose 'n' and would like to use + Calgary anyway, pass 'iommu=calgary' on the kernel command line. + If unsure, say Y. + +# need this always selected by IOMMU for the VIA workaround config SWIOTLB bool @@ -433,15 +523,14 @@ config X86_MCE_AMD the DRAM Error Threshold. config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "kexec system call" help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot + but it is independent of the system firmware. And like a reboot you can start any kernel with it, not just Linux. - The name comes from the similiarity to the exec system call. + The name comes from the similarity to the exec system call. It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not @@ -453,7 +542,14 @@ config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" depends on EXPERIMENTAL help - Generate crash dump after being started by kexec. + Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel or BIOS using + PHYSICAL_START. + For more details see Documentation/kdump/kdump.txt config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) @@ -491,6 +587,30 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config CC_STACKPROTECTOR + bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + This option turns on the -fstack-protector GCC feature. This + feature puts, at the beginning of critical functions, a canary + value on the stack just before the return address, and validates + the value just before actually returning. Stack based buffer + overflows (that need to overwrite this return address) now also + overwrite the canary, which gets detected and the attack is then + neutralized via a kernel panic. + + This feature requires gcc version 4.2 or above, or a distribution + gcc with the feature backported. Older versions are automatically + detected and for those versions, this configuration option is ignored. + +config CC_STACKPROTECTOR_ALL + bool "Use stack-protector for all functions" + depends on CC_STACKPROTECTOR + help + Normally, GCC only inserts the canary value protection for + functions that use large-ish on-stack buffers. By enabling + this option, GCC will be asked to do this for ALL functions. + source kernel/Kconfig.hz config REORDER @@ -503,7 +623,7 @@ config REORDER config K8_NB def_bool y - depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA) + depends on AGP_AMD64 || IOMMU || (PCI && NUMA) endmenu @@ -608,7 +728,7 @@ source "arch/x86_64/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" - depends on EXPERIMENTAL && MODULES + depends on KALLSYMS && EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes