X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Fsetup.c;h=b746deb9ebc649685c4c167f50e525541b8da292;hb=6d2e91bf80e4410207f01edb0962aec9213f3533;hp=81f5d22747ae102c01fc3fc6106973ff61506f13;hpb=a9b43c7d9890066709609df849959009645c1a19;p=safe%2Fjmp%2Flinux-2.6 diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 81f5d22..b746deb 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -74,14 +74,15 @@ #include #include #include -#include #include +#include +#include #include #include #include #include #include -#include +#include #include #include #include @@ -89,15 +90,16 @@ #include #include -#include +#include #include #include #include +#include #include #include -#include #include +#include #include #include @@ -110,6 +112,20 @@ #define ARCH_SETUP #endif +unsigned int boot_cpu_id __read_mostly; + +#ifdef CONFIG_X86_64 +int default_cpu_present_to_apicid(int mps_cpu) +{ + return __default_cpu_present_to_apicid(mps_cpu); +} + +int default_check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return __default_check_phys_apicid_present(boot_cpu_physical_apicid); +} +#endif + #ifndef CONFIG_DEBUG_BOOT_PARAMS struct boot_params __initdata boot_params; #else @@ -588,161 +604,11 @@ static struct x86_quirks default_x86_quirks __initdata; struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; -/* - * Some BIOSes seem to corrupt the low 64k of memory during events - * like suspend/resume and unplugging an HDMI cable. Reserve all - * remaining free memory in that area and fill it with a distinct - * pattern. - */ -#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION -#define MAX_SCAN_AREAS 8 - -static int __read_mostly memory_corruption_check = -1; - -static unsigned __read_mostly corruption_check_size = 64*1024; -static unsigned __read_mostly corruption_check_period = 60; /* seconds */ - -static struct e820entry scan_areas[MAX_SCAN_AREAS]; -static int num_scan_areas; - - -static int set_corruption_check(char *arg) -{ - char *end; - - memory_corruption_check = simple_strtol(arg, &end, 10); - - return (*end == 0) ? 0 : -EINVAL; -} -early_param("memory_corruption_check", set_corruption_check); - -static int set_corruption_check_period(char *arg) -{ - char *end; - - corruption_check_period = simple_strtoul(arg, &end, 10); - - return (*end == 0) ? 0 : -EINVAL; -} -early_param("memory_corruption_check_period", set_corruption_check_period); - -static int set_corruption_check_size(char *arg) -{ - char *end; - unsigned size; - - size = memparse(arg, &end); - - if (*end == '\0') - corruption_check_size = size; - - return (size == corruption_check_size) ? 0 : -EINVAL; -} -early_param("memory_corruption_check_size", set_corruption_check_size); - - -static void __init setup_bios_corruption_check(void) -{ - u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */ - - if (memory_corruption_check == -1) { - memory_corruption_check = -#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK - 1 -#else - 0 -#endif - ; - } - - if (corruption_check_size == 0) - memory_corruption_check = 0; - - if (!memory_corruption_check) - return; - - corruption_check_size = round_up(corruption_check_size, PAGE_SIZE); - - while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) { - u64 size; - addr = find_e820_area_size(addr, &size, PAGE_SIZE); - - if (addr == 0) - break; - - if ((addr + size) > corruption_check_size) - size = corruption_check_size - addr; - - if (size == 0) - break; - - e820_update_range(addr, size, E820_RAM, E820_RESERVED); - scan_areas[num_scan_areas].addr = addr; - scan_areas[num_scan_areas].size = size; - num_scan_areas++; - - /* Assume we've already mapped this early memory */ - memset(__va(addr), 0, size); - - addr += size; - } - - printk(KERN_INFO "Scanning %d areas for low memory corruption\n", - num_scan_areas); - update_e820(); -} - -static struct timer_list periodic_check_timer; - -void check_for_bios_corruption(void) -{ - int i; - int corruption = 0; - - if (!memory_corruption_check) - return; - - for(i = 0; i < num_scan_areas; i++) { - unsigned long *addr = __va(scan_areas[i].addr); - unsigned long size = scan_areas[i].size; - - for(; size; addr++, size -= sizeof(unsigned long)) { - if (!*addr) - continue; - printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n", - addr, __pa(addr), *addr); - corruption = 1; - *addr = 0; - } - } - - WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n"); -} - -static void periodic_check_for_corruption(unsigned long data) -{ - check_for_bios_corruption(); - mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ)); -} - -void start_periodic_check_for_corruption(void) -{ - if (!memory_corruption_check || corruption_check_period == 0) - return; - - printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n", - corruption_check_period); - - init_timer(&periodic_check_timer); - periodic_check_timer.function = &periodic_check_for_corruption; - periodic_check_for_corruption(0); -} -#endif - +#ifdef CONFIG_X86_RESERVE_LOW_64K static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) { printk(KERN_NOTICE - "%s detected: BIOS may corrupt low RAM, working it around.\n", + "%s detected: BIOS may corrupt low RAM, working around it.\n", d->ident); e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED); @@ -750,6 +616,7 @@ static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) return 0; } +#endif /* List of systems that have known low memory corruption BIOS problems */ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { @@ -790,11 +657,13 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); - pre_setup_arch_hook(); #else printk(KERN_INFO "Command line: %s\n", boot_command_line); #endif + /* VMI may relocate the fixmap; do this before touching ioremap area */ + vmi_init(); + early_cpu_init(); early_ioremap_init(); @@ -881,13 +750,8 @@ void __init setup_arch(char **cmdline_p) check_efer(); #endif -#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) - /* - * Must be before kernel pagetables are setup - * or fixmap area is touched. - */ - vmi_init(); -#endif + /* Must be before kernel pagetables are setup */ + vmi_activate(); /* after early param, so could get panic from serial */ reserve_early_setup_data(); @@ -906,10 +770,19 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); + if (efi_enabled) + efi_init(); + dmi_scan_machine(); dmi_check_system(bad_bios_dmi_table); + /* + * VMware detection requires dmi to be available, so this + * needs to be done after dmi_scan_machine, for the BP. + */ + init_hypervisor(&boot_cpu_data); + #ifdef CONFIG_X86_32 probe_roms(); #endif @@ -919,8 +792,6 @@ void __init setup_arch(char **cmdline_p) insert_resource(&iomem_resource, &data_resource); insert_resource(&iomem_resource, &bss_resource); - if (efi_enabled) - efi_init(); #ifdef CONFIG_X86_32 if (ppro_with_ram_bug()) { @@ -953,8 +824,7 @@ void __init setup_arch(char **cmdline_p) #else num_physpages = max_pfn; - if (cpu_has_x2apic) - check_x2apic(); + check_x2apic(); /* How many end-of-memory variables you have, grandma! */ /* need this before calling reserve_initrd */ @@ -994,9 +864,7 @@ void __init setup_arch(char **cmdline_p) reserve_initrd(); -#ifdef CONFIG_X86_64 vsmp_init(); -#endif io_delay_init(); @@ -1022,12 +890,11 @@ void __init setup_arch(char **cmdline_p) */ acpi_reserve_bootmem(); #endif -#ifdef CONFIG_X86_FIND_SMP_CONFIG /* * Find and reserve possible boot-time SMP configuration: */ find_smp_config(); -#endif + reserve_crashkernel(); #ifdef CONFIG_X86_64 @@ -1054,9 +921,7 @@ void __init setup_arch(char **cmdline_p) map_vsyscall(); #endif -#ifdef CONFIG_X86_GENERICARCH generic_apic_probe(); -#endif early_quirks(); @@ -1083,7 +948,7 @@ void __init setup_arch(char **cmdline_p) ioapic_init_mappings(); /* need to wait for io_apic is mapped */ - nr_irqs = probe_nr_irqs(); + probe_nr_irqs_gsi(); kvm_guest_init(); @@ -1107,4 +972,95 @@ void __init setup_arch(char **cmdline_p) #endif } +#ifdef CONFIG_X86_32 +/** + * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +void __init x86_quirk_pre_intr_init(void) +{ + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } + init_ISA_irqs(); +} + +/** + * x86_quirk_intr_init - post gate setup interrupt initialisation + * + * Description: + * Fill in any interrupts that may have been left out by the general + * init_IRQ() routine. interrupts having to do with the machine rather + * than the devices on the I/O bus (like APIC interrupts in intel MP + * systems) are started here. + **/ +void __init x86_quirk_intr_init(void) +{ + if (x86_quirks->arch_intr_init) { + if (x86_quirks->arch_intr_init()) + return; + } +} + +/** + * x86_quirk_trap_init - initialise system specific traps + * + * Description: + * Called as the final act of trap_init(). Used in VISWS to initialise + * the various board specific APIC traps. + **/ +void __init x86_quirk_trap_init(void) +{ + if (x86_quirks->arch_trap_init) { + if (x86_quirks->arch_trap_init()) + return; + } +} + +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER, + .mask = CPU_MASK_NONE, + .name = "timer" +}; + +/** + * x86_quirk_pre_time_init - do any specific initialisations before. + * + **/ +void __init x86_quirk_pre_time_init(void) +{ + if (x86_quirks->arch_pre_time_init) + x86_quirks->arch_pre_time_init(); +} + +/** + * x86_quirk_time_init - do any specific initialisations for the system timer. + * + * Description: + * Must plug the system timer interrupt source at HZ into the IRQ listed + * in irq_vectors.h:TIMER_IRQ + **/ +void __init x86_quirk_time_init(void) +{ + if (x86_quirks->arch_time_init) { + /* + * A nonzero return code does not mean failure, it means + * that the architecture quirk does not want any + * generic (timer) setup to be performed after this: + */ + if (x86_quirks->arch_time_init()) + return; + } + + irq0.mask = cpumask_of_cpu(0); + setup_irq(0, &irq0); +} +#endif /* CONFIG_X86_32 */