X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Fentry_32.S;h=44a8e0dc6737d9f28ba0fe258655e0d43b02226d;hb=e840227c141116171c89ab1abb5cc9fee6fdb488;hp=53393c306e11b553f1691c4ee607873f18c894af;hpb=d75cd22fdd5f7d203fb60014d426942df33dd9a6;p=safe%2Fjmp%2Flinux-2.6 diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 53393c3..44a8e0d 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -30,12 +30,13 @@ * 1C(%esp) - %ds * 20(%esp) - %es * 24(%esp) - %fs - * 28(%esp) - orig_eax - * 2C(%esp) - %eip - * 30(%esp) - %cs - * 34(%esp) - %eflags - * 38(%esp) - %oldesp - * 3C(%esp) - %oldss + * 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS + * 2C(%esp) - orig_eax + * 30(%esp) - %eip + * 34(%esp) - %cs + * 38(%esp) - %eflags + * 3C(%esp) - %oldesp + * 40(%esp) - %oldss * * "current" is in register %ebx during any slow entries. */ @@ -46,13 +47,23 @@ #include #include #include -#include -#include +#include #include #include #include +#include #include +/* Avoid __ASSEMBLER__'ifying just for this. */ +#include +#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) +#define __AUDIT_ARCH_LE 0x40000000 + +#ifndef CONFIG_AUDITSYSCALL +#define sysenter_audit syscall_trace_entry +#define sysexit_audit syscall_exit_work +#endif + /* * We use macros for low-level operations which need to be overridden * for paravirtualization. The following will never clobber any registers: @@ -72,7 +83,7 @@ #define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF #else #define preempt_stop(clobbers) -#define resume_kernel restore_nocheck +#define resume_kernel restore_all #endif .macro TRACE_IRQS_IRET @@ -90,121 +101,221 @@ #define resume_userspace_sig resume_userspace #endif -#define SAVE_ALL \ - cld; \ - pushl %fs; \ - CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET fs, 0;*/\ - pushl %es; \ - CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET es, 0;*/\ - pushl %ds; \ - CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET ds, 0;*/\ - pushl %eax; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET eax, 0;\ - pushl %ebp; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET ebp, 0;\ - pushl %edi; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET edi, 0;\ - pushl %esi; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET esi, 0;\ - pushl %edx; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET edx, 0;\ - pushl %ecx; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET ecx, 0;\ - pushl %ebx; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET ebx, 0;\ - movl $(__USER_DS), %edx; \ - movl %edx, %ds; \ - movl %edx, %es; \ - movl $(__KERNEL_PERCPU), %edx; \ +/* + * User gs save/restore + * + * %gs is used for userland TLS and kernel only uses it for stack + * canary which is required to be at %gs:20 by gcc. Read the comment + * at the top of stackprotector.h for more info. + * + * Local labels 98 and 99 are used. + */ +#ifdef CONFIG_X86_32_LAZY_GS + + /* unfortunately push/pop can't be no-op */ +.macro PUSH_GS + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 +.endm +.macro POP_GS pop=0 + addl $(4 + \pop), %esp + CFI_ADJUST_CFA_OFFSET -(4 + \pop) +.endm +.macro POP_GS_EX +.endm + + /* all the rest are no-op */ +.macro PTGS_TO_GS +.endm +.macro PTGS_TO_GS_EX +.endm +.macro GS_TO_REG reg +.endm +.macro REG_TO_PTGS reg +.endm +.macro SET_KERNEL_GS reg +.endm + +#else /* CONFIG_X86_32_LAZY_GS */ + +.macro PUSH_GS + pushl %gs + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET gs, 0*/ +.endm + +.macro POP_GS pop=0 +98: popl %gs + CFI_ADJUST_CFA_OFFSET -4 + /*CFI_RESTORE gs*/ + .if \pop <> 0 + add $\pop, %esp + CFI_ADJUST_CFA_OFFSET -\pop + .endif +.endm +.macro POP_GS_EX +.pushsection .fixup, "ax" +99: movl $0, (%esp) + jmp 98b +.section __ex_table, "a" + .align 4 + .long 98b, 99b +.popsection +.endm + +.macro PTGS_TO_GS +98: mov PT_GS(%esp), %gs +.endm +.macro PTGS_TO_GS_EX +.pushsection .fixup, "ax" +99: movl $0, PT_GS(%esp) + jmp 98b +.section __ex_table, "a" + .align 4 + .long 98b, 99b +.popsection +.endm + +.macro GS_TO_REG reg + movl %gs, \reg + /*CFI_REGISTER gs, \reg*/ +.endm +.macro REG_TO_PTGS reg + movl \reg, PT_GS(%esp) + /*CFI_REL_OFFSET gs, PT_GS*/ +.endm +.macro SET_KERNEL_GS reg + movl $(__KERNEL_STACK_CANARY), \reg + movl \reg, %gs +.endm + +#endif /* CONFIG_X86_32_LAZY_GS */ + +.macro SAVE_ALL + cld + PUSH_GS + pushl %fs + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET fs, 0;*/ + pushl %es + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET es, 0;*/ + pushl %ds + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ds, 0;*/ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eax, 0 + pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebp, 0 + pushl %edi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edi, 0 + pushl %esi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esi, 0 + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx, 0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx, 0 + pushl %ebx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebx, 0 + movl $(__USER_DS), %edx + movl %edx, %ds + movl %edx, %es + movl $(__KERNEL_PERCPU), %edx movl %edx, %fs + SET_KERNEL_GS %edx +.endm -#define RESTORE_INT_REGS \ - popl %ebx; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE ebx;\ - popl %ecx; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE ecx;\ - popl %edx; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE edx;\ - popl %esi; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE esi;\ - popl %edi; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE edi;\ - popl %ebp; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE ebp;\ - popl %eax; \ - CFI_ADJUST_CFA_OFFSET -4;\ +.macro RESTORE_INT_REGS + popl %ebx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE ebx + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE ecx + popl %edx + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE edx + popl %esi + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE esi + popl %edi + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE edi + popl %ebp + CFI_ADJUST_CFA_OFFSET -4 + CFI_RESTORE ebp + popl %eax + CFI_ADJUST_CFA_OFFSET -4 CFI_RESTORE eax +.endm -#define RESTORE_REGS \ - RESTORE_INT_REGS; \ -1: popl %ds; \ - CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE ds;*/\ -2: popl %es; \ - CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE es;*/\ -3: popl %fs; \ - CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE fs;*/\ -.pushsection .fixup,"ax"; \ -4: movl $0,(%esp); \ - jmp 1b; \ -5: movl $0,(%esp); \ - jmp 2b; \ -6: movl $0,(%esp); \ - jmp 3b; \ -.section __ex_table,"a";\ - .align 4; \ - .long 1b,4b; \ - .long 2b,5b; \ - .long 3b,6b; \ +.macro RESTORE_REGS pop=0 + RESTORE_INT_REGS +1: popl %ds + CFI_ADJUST_CFA_OFFSET -4 + /*CFI_RESTORE ds;*/ +2: popl %es + CFI_ADJUST_CFA_OFFSET -4 + /*CFI_RESTORE es;*/ +3: popl %fs + CFI_ADJUST_CFA_OFFSET -4 + /*CFI_RESTORE fs;*/ + POP_GS \pop +.pushsection .fixup, "ax" +4: movl $0, (%esp) + jmp 1b +5: movl $0, (%esp) + jmp 2b +6: movl $0, (%esp) + jmp 3b +.section __ex_table, "a" + .align 4 + .long 1b, 4b + .long 2b, 5b + .long 3b, 6b .popsection + POP_GS_EX +.endm -#define RING0_INT_FRAME \ - CFI_STARTPROC simple;\ - CFI_SIGNAL_FRAME;\ - CFI_DEF_CFA esp, 3*4;\ - /*CFI_OFFSET cs, -2*4;*/\ +.macro RING0_INT_FRAME + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA esp, 3*4 + /*CFI_OFFSET cs, -2*4;*/ CFI_OFFSET eip, -3*4 +.endm -#define RING0_EC_FRAME \ - CFI_STARTPROC simple;\ - CFI_SIGNAL_FRAME;\ - CFI_DEF_CFA esp, 4*4;\ - /*CFI_OFFSET cs, -2*4;*/\ +.macro RING0_EC_FRAME + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA esp, 4*4 + /*CFI_OFFSET cs, -2*4;*/ CFI_OFFSET eip, -3*4 +.endm -#define RING0_PTREGS_FRAME \ - CFI_STARTPROC simple;\ - CFI_SIGNAL_FRAME;\ - CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\ - /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\ - CFI_OFFSET eip, PT_EIP-PT_OLDESP;\ - /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\ - /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\ - CFI_OFFSET eax, PT_EAX-PT_OLDESP;\ - CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\ - CFI_OFFSET edi, PT_EDI-PT_OLDESP;\ - CFI_OFFSET esi, PT_ESI-PT_OLDESP;\ - CFI_OFFSET edx, PT_EDX-PT_OLDESP;\ - CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\ +.macro RING0_PTREGS_FRAME + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA esp, PT_OLDESP-PT_EBX + /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/ + CFI_OFFSET eip, PT_EIP-PT_OLDESP + /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/ + /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/ + CFI_OFFSET eax, PT_EAX-PT_OLDESP + CFI_OFFSET ebp, PT_EBP-PT_OLDESP + CFI_OFFSET edi, PT_EDI-PT_OLDESP + CFI_OFFSET esi, PT_ESI-PT_OLDESP + CFI_OFFSET edx, PT_EDX-PT_OLDESP + CFI_OFFSET ecx, PT_ECX-PT_OLDESP CFI_OFFSET ebx, PT_EBX-PT_OLDESP +.endm ENTRY(ret_from_fork) CFI_STARTPROC @@ -223,6 +334,10 @@ ENTRY(ret_from_fork) END(ret_from_fork) /* + * Interrupt exit functions should be protected against kprobes + */ + .pushsection .kprobes.text, "ax" +/* * Return to user mode is not as complex as all this looks, * but we want the default path for a system call return to * go as quickly as possible which is why some of this is @@ -260,7 +375,7 @@ END(ret_from_exception) ENTRY(resume_kernel) DISABLE_INTERRUPTS(CLBR_ANY) cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ? - jnz restore_nocheck + jnz restore_all need_resched: movl TI_flags(%ebp), %ecx # need_resched set ? testb $_TIF_NEED_RESCHED, %cl @@ -272,6 +387,10 @@ need_resched: END(resume_kernel) #endif CFI_ENDPROC +/* + * End of kprobes section + */ + .popsection /* SYSENTER_RETURN points to after the "sysenter" instruction in the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ @@ -330,9 +449,9 @@ sysenter_past_esp: GET_THREAD_INFO(%ebp) - /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) - jnz syscall_trace_entry + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) + jnz sysenter_audit +sysenter_do_call: cmpl $(nr_syscalls), %eax jae syscall_badsys call *sys_call_table(,%eax,4) @@ -341,15 +460,56 @@ sysenter_past_esp: DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx - testw $_TIF_ALLWORK_MASK, %cx - jne syscall_exit_work + testl $_TIF_ALLWORK_MASK, %ecx + jne sysexit_audit +sysenter_exit: /* if something modifies registers it must also disable sysexit */ movl PT_EIP(%esp), %edx movl PT_OLDESP(%esp), %ecx xorl %ebp,%ebp TRACE_IRQS_ON 1: mov PT_FS(%esp), %fs + PTGS_TO_GS ENABLE_INTERRUPTS_SYSEXIT + +#ifdef CONFIG_AUDITSYSCALL +sysenter_audit: + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + jnz syscall_trace_entry + addl $4,%esp + CFI_ADJUST_CFA_OFFSET -4 + /* %esi already in 8(%esp) 6th arg: 4th syscall arg */ + /* %edx already in 4(%esp) 5th arg: 3rd syscall arg */ + /* %ecx already in 0(%esp) 4th arg: 2nd syscall arg */ + movl %ebx,%ecx /* 3rd arg: 1st syscall arg */ + movl %eax,%edx /* 2nd arg: syscall number */ + movl $AUDIT_ARCH_I386,%eax /* 1st arg: audit arch */ + call audit_syscall_entry + pushl %ebx + CFI_ADJUST_CFA_OFFSET 4 + movl PT_EAX(%esp),%eax /* reload syscall number */ + jmp sysenter_do_call + +sysexit_audit: + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx + jne syscall_exit_work + TRACE_IRQS_ON + ENABLE_INTERRUPTS(CLBR_ANY) + movl %eax,%edx /* second arg, syscall return value */ + cmpl $0,%eax /* is it < 0? */ + setl %al /* 1 if so, 0 if not */ + movzbl %al,%eax /* zero-extend that */ + inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ + call audit_syscall_exit + DISABLE_INTERRUPTS(CLBR_ANY) + TRACE_IRQS_OFF + movl TI_flags(%ebp), %ecx + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx + jne syscall_exit_work + movl PT_EAX(%esp),%eax /* reload syscall return value */ + jmp sysenter_exit +#endif + CFI_ENDPROC .pushsection .fixup,"ax" 2: movl $0,PT_FS(%esp) @@ -358,8 +518,13 @@ sysenter_past_esp: .align 4 .long 1b,2b .popsection + PTGS_TO_GS_EX ENDPROC(ia32_sysenter_target) +/* + * syscall stub including irq exit should be protected against kprobes + */ + .pushsection .kprobes.text, "ax" # system call handler stub ENTRY(system_call) RING0_INT_FRAME # can't unwind into user space anyway @@ -368,8 +533,7 @@ ENTRY(system_call) SAVE_ALL GET_THREAD_INFO(%ebp) # system call tracing in operation / emulation - /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) jnz syscall_trace_entry cmpl $(nr_syscalls), %eax jae syscall_badsys @@ -382,15 +546,13 @@ syscall_exit: # setting need_resched or sigpending # between sampling and the iret TRACE_IRQS_OFF - testl $X86_EFLAGS_TF,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit - jz no_singlestep - orl $_TIF_SINGLESTEP,TI_flags(%ebp) -no_singlestep: movl TI_flags(%ebp), %ecx - testw $_TIF_ALLWORK_MASK, %cx # current->work + testl $_TIF_ALLWORK_MASK, %ecx # current->work jne syscall_exit_work restore_all: + TRACE_IRQS_IRET +restore_all_notrace: movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS # Warning: PT_OLDSS(%esp) contains the wrong/random values if we # are returning to the kernel. @@ -402,10 +564,7 @@ restore_all: CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS restore_nocheck: - TRACE_IRQS_IRET -restore_nocheck_notrace: - RESTORE_REGS - addl $4, %esp # skip orig_eax/error_code + RESTORE_REGS 4 # skip orig_eax/error_code CFI_ADJUST_CFA_OFFSET -4 irq_return: INTERRUPT_RETURN @@ -440,22 +599,34 @@ ldt_ss: jne restore_nocheck #endif - /* If returning to userspace with 16bit stack, - * try to fix the higher word of ESP, as the CPU - * won't restore it. - * This is an "official" bug of all the x86-compatible - * CPUs, which we can try to work around to make - * dosemu and wine happy. */ - movl PT_OLDESP(%esp), %eax - movl %esp, %edx - call patch_espfix_desc +/* + * Setup and switch to ESPFIX stack + * + * We're returning to userspace with a 16 bit stack. The CPU will not + * restore the high word of ESP for us on executing iret... This is an + * "official" bug of all the x86-compatible CPUs, which we can work + * around to make dosemu and wine happy. We do this by preloading the + * high word of ESP with the high word of the userspace ESP while + * compensating for the offset by changing to the ESPFIX segment with + * a base address that matches for the difference. + */ + mov %esp, %edx /* load kernel esp */ + mov PT_OLDESP(%esp), %eax /* load userspace esp */ + mov %dx, %ax /* eax: new kernel esp */ + sub %eax, %edx /* offset (low word is 0) */ + PER_CPU(gdt_page, %ebx) + shr $16, %edx + mov %dl, GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx) /* bits 16..23 */ + mov %dh, GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx) /* bits 24..31 */ pushl $__ESPFIX_SS CFI_ADJUST_CFA_OFFSET 4 - pushl %eax + push %eax /* new kernel esp */ CFI_ADJUST_CFA_OFFSET 4 + /* Disable interrupts, but do not irqtrace this section: we + * will soon execute iret and the tracer was already set to + * the irqstate after the iret */ DISABLE_INTERRUPTS(CLBR_EAX) - TRACE_IRQS_OFF - lss (%esp), %esp + lss (%esp), %esp /* switch to espfix segment */ CFI_ADJUST_CFA_OFFSET -8 jmp restore_nocheck CFI_ENDPROC @@ -513,12 +684,8 @@ END(work_pending) syscall_trace_entry: movl $-ENOSYS,PT_EAX(%esp) movl %esp, %eax - xorl %edx,%edx - call do_syscall_trace - cmpl $0, %eax - jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU, - # so must skip actual syscall - movl PT_ORIG_EAX(%esp), %eax + call syscall_trace_enter + /* What it returned is what we'll actually use. */ cmpl $(nr_syscalls), %eax jnae syscall_call jmp syscall_exit @@ -527,14 +694,13 @@ END(syscall_trace_entry) # perform syscall exit tracing ALIGN syscall_exit_work: - testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl + testl $_TIF_WORK_SYSCALL_EXIT, %ecx jz work_pending TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call + ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call # schedule() instead movl %esp, %eax - movl $1, %edx - call do_syscall_trace + call syscall_trace_leave jmp resume_userspace END(syscall_exit_work) CFI_ENDPROC @@ -551,53 +717,136 @@ syscall_badsys: jmp resume_userspace END(syscall_badsys) CFI_ENDPROC +/* + * End of kprobes section + */ + .popsection -#define FIXUP_ESPFIX_STACK \ - /* since we are on a wrong stack, we cant make it a C code :( */ \ - PER_CPU(gdt_page, %ebx); \ - GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \ - addl %esp, %eax; \ - pushl $__KERNEL_DS; \ - CFI_ADJUST_CFA_OFFSET 4; \ +/* + * System calls that need a pt_regs pointer. + */ +#define PTREGSCALL0(name) \ + ALIGN; \ +ptregs_##name: \ + leal 4(%esp),%eax; \ + jmp sys_##name; + +#define PTREGSCALL1(name) \ + ALIGN; \ +ptregs_##name: \ + leal 4(%esp),%edx; \ + movl (PT_EBX+4)(%esp),%eax; \ + jmp sys_##name; + +#define PTREGSCALL2(name) \ + ALIGN; \ +ptregs_##name: \ + leal 4(%esp),%ecx; \ + movl (PT_ECX+4)(%esp),%edx; \ + movl (PT_EBX+4)(%esp),%eax; \ + jmp sys_##name; + +#define PTREGSCALL3(name) \ + ALIGN; \ +ptregs_##name: \ + leal 4(%esp),%eax; \ pushl %eax; \ - CFI_ADJUST_CFA_OFFSET 4; \ - lss (%esp), %esp; \ - CFI_ADJUST_CFA_OFFSET -8; -#define UNWIND_ESPFIX_STACK \ - movl %ss, %eax; \ - /* see if on espfix stack */ \ - cmpw $__ESPFIX_SS, %ax; \ - jne 27f; \ - movl $__KERNEL_DS, %eax; \ - movl %eax, %ds; \ - movl %eax, %es; \ - /* switch to normal stack */ \ - FIXUP_ESPFIX_STACK; \ -27:; + movl PT_EDX(%eax),%ecx; \ + movl PT_ECX(%eax),%edx; \ + movl PT_EBX(%eax),%eax; \ + call sys_##name; \ + addl $4,%esp; \ + ret + +PTREGSCALL1(iopl) +PTREGSCALL0(fork) +PTREGSCALL0(vfork) +PTREGSCALL3(execve) +PTREGSCALL2(sigaltstack) +PTREGSCALL0(sigreturn) +PTREGSCALL0(rt_sigreturn) +PTREGSCALL2(vm86) +PTREGSCALL1(vm86old) + +/* Clone is an oddball. The 4th arg is in %edi */ + ALIGN; +ptregs_clone: + leal 4(%esp),%eax + pushl %eax + pushl PT_EDI(%eax) + movl PT_EDX(%eax),%ecx + movl PT_ECX(%eax),%edx + movl PT_EBX(%eax),%eax + call sys_clone + addl $8,%esp + ret + +.macro FIXUP_ESPFIX_STACK +/* + * Switch back for ESPFIX stack to the normal zerobased stack + * + * We can't call C functions using the ESPFIX stack. This code reads + * the high word of the segment base from the GDT and swiches to the + * normal stack and adjusts ESP with the matching offset. + */ + /* fixup the stack */ + PER_CPU(gdt_page, %ebx) + mov GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx), %al /* bits 16..23 */ + mov GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx), %ah /* bits 24..31 */ + shl $16, %eax + addl %esp, %eax /* the adjusted stack pointer */ + pushl $__KERNEL_DS + CFI_ADJUST_CFA_OFFSET 4 + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + lss (%esp), %esp /* switch to the normal stack segment */ + CFI_ADJUST_CFA_OFFSET -8 +.endm +.macro UNWIND_ESPFIX_STACK + movl %ss, %eax + /* see if on espfix stack */ + cmpw $__ESPFIX_SS, %ax + jne 27f + movl $__KERNEL_DS, %eax + movl %eax, %ds + movl %eax, %es + /* switch to normal stack */ + FIXUP_ESPFIX_STACK +27: +.endm /* - * Build the entry stubs and pointer table with - * some assembler magic. + * Build the entry stubs and pointer table with some assembler magic. + * We pack 7 stubs into a single 32-byte chunk, which will fit in a + * single cache line on all modern x86 implementations. */ -.section .rodata,"a" +.section .init.rodata,"a" ENTRY(interrupt) .text - + .p2align 5 + .p2align CONFIG_X86_L1_CACHE_SHIFT ENTRY(irq_entries_start) RING0_INT_FRAME -vector=0 -.rept NR_IRQS - ALIGN - .if vector +vector=FIRST_EXTERNAL_VECTOR +.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7 + .balign 32 + .rept 7 + .if vector < NR_VECTORS + .if vector <> FIRST_EXTERNAL_VECTOR CFI_ADJUST_CFA_OFFSET -4 - .endif -1: pushl $~(vector) + .endif +1: pushl $(~vector+0x80) /* Note: always in signed byte range */ CFI_ADJUST_CFA_OFFSET 4 - jmp common_interrupt - .previous + .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6 + jmp 2f + .endif + .previous .long 1b - .text + .text vector=vector+1 + .endif + .endr +2: jmp common_interrupt .endr END(irq_entries_start) @@ -609,8 +858,9 @@ END(interrupt) * the CPU automatically disables interrupts when executing an IRQ vector, * so IRQ-flags tracing has to follow that: */ - ALIGN + .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: + addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */ SAVE_ALL TRACE_IRQS_OFF movl %esp,%eax @@ -619,7 +869,11 @@ common_interrupt: ENDPROC(common_interrupt) CFI_ENDPROC -#define BUILD_INTERRUPT(name, nr) \ +/* + * Irq entries should be protected against kprobes + */ + .pushsection .kprobes.text, "ax" +#define BUILD_INTERRUPT3(name, nr, fn) \ ENTRY(name) \ RING0_INT_FRAME; \ pushl $~(nr); \ @@ -627,71 +881,15 @@ ENTRY(name) \ SAVE_ALL; \ TRACE_IRQS_OFF \ movl %esp,%eax; \ - call smp_##name; \ + call fn; \ jmp ret_from_intr; \ CFI_ENDPROC; \ ENDPROC(name) -/* The include is where all of the SMP etc. interrupts come from */ -#include "entry_arch.h" +#define BUILD_INTERRUPT(name, nr) BUILD_INTERRUPT3(name, nr, smp_##name) -KPROBE_ENTRY(page_fault) - RING0_EC_FRAME - pushl $do_page_fault - CFI_ADJUST_CFA_OFFSET 4 - ALIGN -error_code: - /* the function address is in %fs's slot on the stack */ - pushl %es - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET es, 0*/ - pushl %ds - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET ds, 0*/ - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET eax, 0 - pushl %ebp - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ebp, 0 - pushl %edi - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET edi, 0 - pushl %esi - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET esi, 0 - pushl %edx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET edx, 0 - pushl %ecx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ecx, 0 - pushl %ebx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ebx, 0 - cld - pushl %fs - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET fs, 0*/ - movl $(__KERNEL_PERCPU), %ecx - movl %ecx, %fs - UNWIND_ESPFIX_STACK - popl %ecx - CFI_ADJUST_CFA_OFFSET -4 - /*CFI_REGISTER es, ecx*/ - movl PT_FS(%esp), %edi # get the function address - movl PT_ORIG_EAX(%esp), %edx # get the error code - movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart - mov %ecx, PT_FS(%esp) - /*CFI_REL_OFFSET fs, ES*/ - movl $(__USER_DS), %ecx - movl %ecx, %ds - movl %ecx, %es - movl %esp,%eax # pt_regs pointer - call *%edi - jmp ret_from_exception - CFI_ENDPROC -KPROBE_END(page_fault) +/* The include is where all of the SMP etc. interrupts come from */ +#include ENTRY(coprocessor_error) RING0_INT_FRAME @@ -717,190 +915,36 @@ ENTRY(device_not_available) RING0_INT_FRAME pushl $-1 # mark this as an int CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - GET_CR0_INTO_EAX - testl $0x4, %eax # EM (math emulation bit) - jne device_not_available_emulate - preempt_stop(CLBR_ANY) - call math_state_restore - jmp ret_from_exception -device_not_available_emulate: - pushl $0 # temporary storage for ORIG_EIP + pushl $do_device_not_available CFI_ADJUST_CFA_OFFSET 4 - call math_emulate - addl $4, %esp - CFI_ADJUST_CFA_OFFSET -4 - jmp ret_from_exception + jmp error_code CFI_ENDPROC END(device_not_available) -/* - * Debug traps and NMI can happen at the one SYSENTER instruction - * that sets up the real kernel stack. Check here, since we can't - * allow the wrong stack to be used. - * - * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have - * already pushed 3 words if it hits on the sysenter instruction: - * eflags, cs and eip. - * - * We just load the right stack, and push the three (known) values - * by hand onto the new stack - while updating the return eip past - * the instruction that would have done it for sysenter. - */ -#define FIX_STACK(offset, ok, label) \ - cmpw $__KERNEL_CS,4(%esp); \ - jne ok; \ -label: \ - movl TSS_sysenter_sp0+offset(%esp),%esp; \ - CFI_DEF_CFA esp, 0; \ - CFI_UNDEFINED eip; \ - pushfl; \ - CFI_ADJUST_CFA_OFFSET 4; \ - pushl $__KERNEL_CS; \ - CFI_ADJUST_CFA_OFFSET 4; \ - pushl $sysenter_past_esp; \ - CFI_ADJUST_CFA_OFFSET 4; \ - CFI_REL_OFFSET eip, 0 +#ifdef CONFIG_PARAVIRT +ENTRY(native_iret) + iret +.section __ex_table,"a" + .align 4 + .long native_iret, iret_exc +.previous +END(native_iret) + +ENTRY(native_irq_enable_sysexit) + sti + sysexit +END(native_irq_enable_sysexit) +#endif -KPROBE_ENTRY(debug) +ENTRY(overflow) RING0_INT_FRAME - cmpl $ia32_sysenter_target,(%esp) - jne debug_stack_correct - FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) -debug_stack_correct: - pushl $-1 # mark this as an int + pushl $0 CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - xorl %edx,%edx # error code 0 - movl %esp,%eax # pt_regs pointer - call do_debug - jmp ret_from_exception + pushl $do_overflow + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code CFI_ENDPROC -KPROBE_END(debug) - -/* - * NMI is doubly nasty. It can happen _while_ we're handling - * a debug fault, and the debug fault hasn't yet been able to - * clear up the stack. So we first check whether we got an - * NMI on the sysenter entry path, but after that we need to - * check whether we got an NMI on the debug path where the debug - * fault happened on the sysenter path. - */ -KPROBE_ENTRY(nmi) - RING0_INT_FRAME - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - movl %ss, %eax - cmpw $__ESPFIX_SS, %ax - popl %eax - CFI_ADJUST_CFA_OFFSET -4 - je nmi_espfix_stack - cmpl $ia32_sysenter_target,(%esp) - je nmi_stack_fixup - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - movl %esp,%eax - /* Do not access memory above the end of our stack page, - * it might not exist. - */ - andl $(THREAD_SIZE-1),%eax - cmpl $(THREAD_SIZE-20),%eax - popl %eax - CFI_ADJUST_CFA_OFFSET -4 - jae nmi_stack_correct - cmpl $ia32_sysenter_target,12(%esp) - je nmi_debug_stack_check -nmi_stack_correct: - /* We have a RING0_INT_FRAME here */ - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_nmi - jmp restore_nocheck_notrace - CFI_ENDPROC - -nmi_stack_fixup: - RING0_INT_FRAME - FIX_STACK(12,nmi_stack_correct, 1) - jmp nmi_stack_correct - -nmi_debug_stack_check: - /* We have a RING0_INT_FRAME here */ - cmpw $__KERNEL_CS,16(%esp) - jne nmi_stack_correct - cmpl $debug,(%esp) - jb nmi_stack_correct - cmpl $debug_esp_fix_insn,(%esp) - ja nmi_stack_correct - FIX_STACK(24,nmi_stack_correct, 1) - jmp nmi_stack_correct - -nmi_espfix_stack: - /* We have a RING0_INT_FRAME here. - * - * create the pointer to lss back - */ - pushl %ss - CFI_ADJUST_CFA_OFFSET 4 - pushl %esp - CFI_ADJUST_CFA_OFFSET 4 - addw $4, (%esp) - /* copy the iret frame of 12 bytes */ - .rept 3 - pushl 16(%esp) - CFI_ADJUST_CFA_OFFSET 4 - .endr - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - FIXUP_ESPFIX_STACK # %eax == %esp - xorl %edx,%edx # zero error code - call do_nmi - RESTORE_REGS - lss 12+4(%esp), %esp # back to espfix stack - CFI_ADJUST_CFA_OFFSET -24 - jmp irq_return - CFI_ENDPROC -KPROBE_END(nmi) - -#ifdef CONFIG_PARAVIRT -ENTRY(native_iret) - iret -.section __ex_table,"a" - .align 4 - .long native_iret, iret_exc -.previous -END(native_iret) - -ENTRY(native_irq_enable_sysexit) - sti - sysexit -END(native_irq_enable_sysexit) -#endif - -KPROBE_ENTRY(int3) - RING0_INT_FRAME - pushl $-1 # mark this as an int - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_int3 - jmp ret_from_exception - CFI_ENDPROC -KPROBE_END(int3) - -ENTRY(overflow) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_overflow - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(overflow) +END(overflow) ENTRY(bounds) RING0_INT_FRAME @@ -956,14 +1000,6 @@ ENTRY(stack_segment) CFI_ENDPROC END(stack_segment) -KPROBE_ENTRY(general_protection) - RING0_EC_FRAME - pushl $do_general_protection - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -KPROBE_END(general_protection) - ENTRY(alignment_check) RING0_EC_FRAME pushl $do_alignment_check @@ -1003,17 +1039,18 @@ ENTRY(spurious_interrupt_bug) jmp error_code CFI_ENDPROC END(spurious_interrupt_bug) +/* + * End of kprobes section + */ + .popsection ENTRY(kernel_thread_helper) pushl $0 # fake return address for unwinder CFI_STARTPROC - movl %edx,%eax - push %edx - CFI_ADJUST_CFA_OFFSET 4 - call *%ebx - push %eax - CFI_ADJUST_CFA_OFFSET 4 + movl %edi,%eax + call *%esi call do_exit + ud2 # padding for call trace CFI_ENDPROC ENDPROC(kernel_thread_helper) @@ -1023,7 +1060,9 @@ ENDPROC(kernel_thread_helper) ENTRY(xen_sysenter_target) RING0_INT_FRAME addl $5*4, %esp /* remove xen-provided frame */ + CFI_ADJUST_CFA_OFFSET -5*4 jmp sysenter_past_esp + CFI_ENDPROC ENTRY(xen_hypervisor_callback) CFI_STARTPROC @@ -1110,7 +1149,333 @@ ENDPROC(xen_failsafe_callback) #endif /* CONFIG_XEN */ +#ifdef CONFIG_FUNCTION_TRACER +#ifdef CONFIG_DYNAMIC_FTRACE + +ENTRY(mcount) + ret +END(mcount) + +ENTRY(ftrace_caller) + cmpl $0, function_trace_stop + jne ftrace_stub + + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + subl $MCOUNT_INSN_SIZE, %eax + +.globl ftrace_call +ftrace_call: + call ftrace_stub + + popl %edx + popl %ecx + popl %eax +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +.globl ftrace_graph_call +ftrace_graph_call: + jmp ftrace_stub +#endif + +.globl ftrace_stub +ftrace_stub: + ret +END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ + +ENTRY(mcount) + cmpl $0, function_trace_stop + jne ftrace_stub + + cmpl $ftrace_stub, ftrace_trace_function + jnz trace +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + cmpl $ftrace_stub, ftrace_graph_return + jnz ftrace_graph_caller + + cmpl $ftrace_graph_entry_stub, ftrace_graph_entry + jnz ftrace_graph_caller +#endif +.globl ftrace_stub +ftrace_stub: + ret + + /* taken from glibc */ +trace: + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + subl $MCOUNT_INSN_SIZE, %eax + + call *ftrace_trace_function + + popl %edx + popl %ecx + popl %eax + jmp ftrace_stub +END(mcount) +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FUNCTION_TRACER */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +ENTRY(ftrace_graph_caller) + cmpl $0, function_trace_stop + jne ftrace_stub + + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %edx + lea 0x4(%ebp), %eax + movl (%ebp), %ecx + subl $MCOUNT_INSN_SIZE, %edx + call prepare_ftrace_return + popl %edx + popl %ecx + popl %eax + ret +END(ftrace_graph_caller) + +.globl return_to_handler +return_to_handler: + pushl %eax + pushl %edx + movl %ebp, %eax + call ftrace_return_to_handler + movl %eax, %ecx + popl %edx + popl %eax + jmp *%ecx +#endif + .section .rodata,"a" #include "syscall_table_32.S" syscall_table_size=(.-sys_call_table) + +/* + * Some functions should be protected against kprobes + */ + .pushsection .kprobes.text, "ax" + +ENTRY(page_fault) + RING0_EC_FRAME + pushl $do_page_fault + CFI_ADJUST_CFA_OFFSET 4 + ALIGN +error_code: + /* the function address is in %gs's slot on the stack */ + pushl %fs + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET fs, 0*/ + pushl %es + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET es, 0*/ + pushl %ds + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ds, 0*/ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eax, 0 + pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebp, 0 + pushl %edi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edi, 0 + pushl %esi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esi, 0 + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx, 0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx, 0 + pushl %ebx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebx, 0 + cld + movl $(__KERNEL_PERCPU), %ecx + movl %ecx, %fs + UNWIND_ESPFIX_STACK + GS_TO_REG %ecx + movl PT_GS(%esp), %edi # get the function address + movl PT_ORIG_EAX(%esp), %edx # get the error code + movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart + REG_TO_PTGS %ecx + SET_KERNEL_GS %ecx + movl $(__USER_DS), %ecx + movl %ecx, %ds + movl %ecx, %es + TRACE_IRQS_OFF + movl %esp,%eax # pt_regs pointer + call *%edi + jmp ret_from_exception + CFI_ENDPROC +END(page_fault) + +/* + * Debug traps and NMI can happen at the one SYSENTER instruction + * that sets up the real kernel stack. Check here, since we can't + * allow the wrong stack to be used. + * + * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have + * already pushed 3 words if it hits on the sysenter instruction: + * eflags, cs and eip. + * + * We just load the right stack, and push the three (known) values + * by hand onto the new stack - while updating the return eip past + * the instruction that would have done it for sysenter. + */ +.macro FIX_STACK offset ok label + cmpw $__KERNEL_CS, 4(%esp) + jne \ok +\label: + movl TSS_sysenter_sp0 + \offset(%esp), %esp + CFI_DEF_CFA esp, 0 + CFI_UNDEFINED eip + pushfl + CFI_ADJUST_CFA_OFFSET 4 + pushl $__KERNEL_CS + CFI_ADJUST_CFA_OFFSET 4 + pushl $sysenter_past_esp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eip, 0 +.endm + +ENTRY(debug) + RING0_INT_FRAME + cmpl $ia32_sysenter_target,(%esp) + jne debug_stack_correct + FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn +debug_stack_correct: + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + TRACE_IRQS_OFF + xorl %edx,%edx # error code 0 + movl %esp,%eax # pt_regs pointer + call do_debug + jmp ret_from_exception + CFI_ENDPROC +END(debug) + +/* + * NMI is doubly nasty. It can happen _while_ we're handling + * a debug fault, and the debug fault hasn't yet been able to + * clear up the stack. So we first check whether we got an + * NMI on the sysenter entry path, but after that we need to + * check whether we got an NMI on the debug path where the debug + * fault happened on the sysenter path. + */ +ENTRY(nmi) + RING0_INT_FRAME + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl %ss, %eax + cmpw $__ESPFIX_SS, %ax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + je nmi_espfix_stack + cmpl $ia32_sysenter_target,(%esp) + je nmi_stack_fixup + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl %esp,%eax + /* Do not access memory above the end of our stack page, + * it might not exist. + */ + andl $(THREAD_SIZE-1),%eax + cmpl $(THREAD_SIZE-20),%eax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + jae nmi_stack_correct + cmpl $ia32_sysenter_target,12(%esp) + je nmi_debug_stack_check +nmi_stack_correct: + /* We have a RING0_INT_FRAME here */ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + xorl %edx,%edx # zero error code + movl %esp,%eax # pt_regs pointer + call do_nmi + jmp restore_all_notrace + CFI_ENDPROC + +nmi_stack_fixup: + RING0_INT_FRAME + FIX_STACK 12, nmi_stack_correct, 1 + jmp nmi_stack_correct + +nmi_debug_stack_check: + /* We have a RING0_INT_FRAME here */ + cmpw $__KERNEL_CS,16(%esp) + jne nmi_stack_correct + cmpl $debug,(%esp) + jb nmi_stack_correct + cmpl $debug_esp_fix_insn,(%esp) + ja nmi_stack_correct + FIX_STACK 24, nmi_stack_correct, 1 + jmp nmi_stack_correct + +nmi_espfix_stack: + /* We have a RING0_INT_FRAME here. + * + * create the pointer to lss back + */ + pushl %ss + CFI_ADJUST_CFA_OFFSET 4 + pushl %esp + CFI_ADJUST_CFA_OFFSET 4 + addl $4, (%esp) + /* copy the iret frame of 12 bytes */ + .rept 3 + pushl 16(%esp) + CFI_ADJUST_CFA_OFFSET 4 + .endr + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + FIXUP_ESPFIX_STACK # %eax == %esp + xorl %edx,%edx # zero error code + call do_nmi + RESTORE_REGS + lss 12+4(%esp), %esp # back to espfix stack + CFI_ADJUST_CFA_OFFSET -24 + jmp irq_return + CFI_ENDPROC +END(nmi) + +ENTRY(int3) + RING0_INT_FRAME + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + TRACE_IRQS_OFF + xorl %edx,%edx # zero error code + movl %esp,%eax # pt_regs pointer + call do_int3 + jmp ret_from_exception + CFI_ENDPROC +END(int3) + +ENTRY(general_protection) + RING0_EC_FRAME + pushl $do_general_protection + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(general_protection) + +/* + * End of kprobes section + */ + .popsection