X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Facpi%2Fboot.c;h=a18eb7ce223643c8c9d6f40303c8180fa7d59e47;hb=cd80a8142efa3468c2cd9fb52845f334c3220d54;hp=2cdc9de9371dd0d941406c11af288a8582c4e475;hpb=6e4be1ff2e767fc3a34c5e8d67c3cba107c02099;p=safe%2Fjmp%2Flinux-2.6

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 2cdc9de..a18eb7c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -39,9 +39,10 @@
 #include <asm/apic.h>
 #include <asm/io.h>
 #include <asm/mpspec.h>
+#include <asm/smp.h>
 
 static int __initdata acpi_force = 0;
-
+u32 acpi_rsdt_forced;
 #ifdef	CONFIG_ACPI
 int acpi_disabled = 0;
 #else
@@ -50,19 +51,7 @@ int acpi_disabled = 1;
 EXPORT_SYMBOL(acpi_disabled);
 
 #ifdef	CONFIG_X86_64
-
-#include <asm/proto.h>
-
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
-
-
-#else				/* X86 */
-
-#ifdef	CONFIG_X86_LOCAL_APIC
-#include <mach_apic.h>
-#include <mach_mpparse.h>
-#endif				/* CONFIG_X86_LOCAL_APIC */
-
+# include <asm/proto.h>
 #endif				/* X86 */
 
 #define BAD_MADT_ENTRY(entry, end) (					    \
@@ -103,21 +92,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
  */
 enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 
-#ifdef	CONFIG_X86_64
-
-/* rely on all ACPI tables being in the direct mapping */
-char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
-{
-	if (!phys_addr || !size)
-		return NULL;
-
-	if (phys_addr+size <= (end_pfn_map << PAGE_SHIFT) + PAGE_SIZE)
-		return __va(phys_addr);
-
-	return NULL;
-}
-
-#else
 
 /*
  * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
@@ -133,38 +107,36 @@ char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
  */
 char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 {
-	unsigned long base, offset, mapped_size;
-	int idx;
 
-	if (phys + size < 8 * 1024 * 1024)
-		return __va(phys);
-
-	offset = phys & (PAGE_SIZE - 1);
-	mapped_size = PAGE_SIZE - offset;
-	set_fixmap(FIX_ACPI_END, phys);
-	base = fix_to_virt(FIX_ACPI_END);
+	if (!phys || !size)
+		return NULL;
 
-	/*
-	 * Most cases can be covered by the below.
-	 */
-	idx = FIX_ACPI_END;
-	while (mapped_size < size) {
-		if (--idx < FIX_ACPI_BEGIN)
-			return NULL;	/* cannot handle this */
-		phys += PAGE_SIZE;
-		set_fixmap(idx, phys);
-		mapped_size += PAGE_SIZE;
-	}
+	return early_ioremap(phys, size);
+}
+void __init __acpi_unmap_table(char *map, unsigned long size)
+{
+	if (!map || !size)
+		return;
 
-	return ((unsigned char *)base + offset);
+	early_iounmap(map, size);
 }
-#endif
 
 #ifdef CONFIG_PCI_MMCONFIG
+
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
 /* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
 struct acpi_mcfg_allocation *pci_mmcfg_config;
 int pci_mmcfg_config_num;
 
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+	if (!strcmp(mcfg->header.oem_id, "SGI"))
+		acpi_mcfg_64bit_base_addr = TRUE;
+
+	return 0;
+}
+
 int __init acpi_parse_mcfg(struct acpi_table_header *header)
 {
 	struct acpi_table_mcfg *mcfg;
@@ -197,8 +169,12 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header)
 	}
 
 	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+	acpi_mcfg_oem_check(mcfg);
+
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
+		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+		    !acpi_mcfg_64bit_base_addr) {
 			printk(KERN_ERR PREFIX
 			       "MMCONFIG not in low 4GB of memory\n");
 			kfree(pci_mmcfg_config);
@@ -232,11 +208,27 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 		       madt->address);
 	}
 
-	acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+	default_acpi_madt_oem_check(madt->header.oem_id,
+				    madt->header.oem_table_id);
 
 	return 0;
 }
 
+static void __cpuinit acpi_register_lapic(int id, u8 enabled)
+{
+	unsigned int ver = 0;
+
+	if (!enabled) {
+		++disabled_cpus;
+		return;
+	}
+
+	if (boot_cpu_physical_apicid != -1U)
+		ver = apic_version[boot_cpu_physical_apicid];
+
+	generic_processor_info(id, ver);
+}
+
 static int __init
 acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
 {
@@ -256,8 +248,26 @@ acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
 	 * to not preallocating memory for all NR_CPUS
 	 * when we use CPU hotplug.
 	 */
-	mp_register_lapic(processor->id,	/* APIC ID */
-			  processor->lapic_flags & ACPI_MADT_ENABLED);	/* Enabled? */
+	acpi_register_lapic(processor->id,	/* APIC ID */
+			    processor->lapic_flags & ACPI_MADT_ENABLED);
+
+	return 0;
+}
+
+static int __init
+acpi_parse_sapic(struct acpi_subtable_header *header, const unsigned long end)
+{
+	struct acpi_madt_local_sapic *processor = NULL;
+
+	processor = (struct acpi_madt_local_sapic *)header;
+
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */
+			    processor->lapic_flags & ACPI_MADT_ENABLED);
 
 	return 0;
 }
@@ -474,8 +484,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
 	 */
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
-		extern void eisa_set_level_irq(unsigned int irq);
-
 		if (triggering == ACPI_LEVEL_SENSITIVE)
 			eisa_set_level_irq(gsi);
 	}
@@ -500,9 +508,10 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
 	struct acpi_madt_local_apic *lapic;
-	cpumask_t tmp_map, new_map;
+	cpumask_var_t tmp_map, new_map;
 	u8 physid;
 	int cpu;
+	int retval = -ENOMEM;
 
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
 		return -EINVAL;
@@ -531,23 +540,37 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	buffer.length = ACPI_ALLOCATE_BUFFER;
 	buffer.pointer = NULL;
 
-	tmp_map = cpu_present_map;
-	mp_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
+	if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL))
+		goto out;
+
+	if (!alloc_cpumask_var(&new_map, GFP_KERNEL))
+		goto free_tmp_map;
+
+	cpumask_copy(tmp_map, cpu_present_mask);
+	acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
 
 	/*
 	 * If mp_register_lapic successfully generates a new logical cpu
 	 * number, then the following will get us exactly what was mapped
 	 */
-	cpus_andnot(new_map, cpu_present_map, tmp_map);
-	if (cpus_empty(new_map)) {
+	cpumask_andnot(new_map, cpu_present_mask, tmp_map);
+	if (cpumask_empty(new_map)) {
 		printk ("Unable to map lapic to logical cpu number\n");
-		return -EINVAL;
+		retval = -EINVAL;
+		goto free_new_map;
 	}
 
-	cpu = first_cpu(new_map);
+	cpu = cpumask_first(new_map);
 
 	*pcpu = cpu;
-	return 0;
+	retval = 0;
+
+free_new_map:
+	free_cpumask_var(new_map);
+free_tmp_map:
+	free_cpumask_var(tmp_map);
+out:
+	return retval;
 }
 
 /* wrapper to silence section mismatch warning */
@@ -560,7 +583,7 @@ EXPORT_SYMBOL(acpi_map_lsapic);
 int acpi_unmap_lsapic(int cpu)
 {
 	per_cpu(x86_cpu_to_apicid, cpu) = -1;
-	cpu_clear(cpu, cpu_present_map);
+	set_cpu_present(cpu, false);
 	num_processors--;
 
 	return (0);
@@ -664,10 +687,6 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
 #define HPET_RESOURCE_NAME_SIZE 9
 	hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE);
 
-	if (!hpet_res)
-		return 0;
-
-	memset(hpet_res, 0, sizeof(*hpet_res));
 	hpet_res->name = (void *)&hpet_res[1];
 	hpet_res->flags = IORESOURCE_MEM;
 	snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
@@ -732,6 +751,45 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
  * Parse LAPIC entries in MADT
  * returns 0 on success, < 0 on error
  */
+
+static void __init acpi_register_lapic_address(unsigned long address)
+{
+	mp_lapic_addr = address;
+
+	set_fixmap_nocache(FIX_APIC_BASE, address);
+	if (boot_cpu_physical_apicid == -1U) {
+		boot_cpu_physical_apicid  = read_apic_id();
+		apic_version[boot_cpu_physical_apicid] =
+			 GET_APIC_VERSION(apic_read(APIC_LVR));
+	}
+}
+
+static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
+{
+	int count;
+
+	if (!cpu_has_apic)
+		return -ENODEV;
+
+	/*
+	 * Note that the LAPIC address is obtained from the MADT (32-bit value)
+	 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+	 */
+
+	count =
+	    acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
+				  acpi_parse_lapic_addr_ovr, 0);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX
+		       "Error parsing LAPIC address override entry\n");
+		return count;
+	}
+
+	acpi_register_lapic_address(acpi_lapic_addr);
+
+	return count;
+}
+
 static int __init acpi_parse_madt_lapic_entries(void)
 {
 	int count;
@@ -753,10 +811,14 @@ static int __init acpi_parse_madt_lapic_entries(void)
 		return count;
 	}
 
-	mp_register_lapic_address(acpi_lapic_addr);
+	acpi_register_lapic_address(acpi_lapic_addr);
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
+				      acpi_parse_sapic, MAX_APICS);
 
-	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, acpi_parse_lapic,
-				      MAX_APICS);
+	if (!count)
+		count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
+					      acpi_parse_lapic, MAX_APICS);
 	if (!count) {
 		printk(KERN_ERR PREFIX "No LAPIC entries present\n");
 		/* TBD: Cleanup to allow fallback to MPS */
@@ -779,6 +841,395 @@ static int __init acpi_parse_madt_lapic_entries(void)
 #endif				/* CONFIG_X86_LOCAL_APIC */
 
 #ifdef	CONFIG_X86_IO_APIC
+#define MP_ISA_BUS		0
+
+#ifdef CONFIG_X86_ES7000
+extern int es7000_plat;
+#endif
+
+static struct {
+	int apic_id;
+	int gsi_base;
+	int gsi_end;
+	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int mp_find_ioapic(int gsi)
+{
+	int i = 0;
+
+	/* Find the IOAPIC that manages this GSI. */
+	for (i = 0; i < nr_ioapics; i++) {
+		if ((gsi >= mp_ioapic_routing[i].gsi_base)
+		    && (gsi <= mp_ioapic_routing[i].gsi_end))
+			return i;
+	}
+
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+	return -1;
+}
+
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+	if (WARN_ON(ioapic == -1))
+		return -1;
+	if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
+		return -1;
+
+	return gsi - mp_ioapic_routing[ioapic].gsi_base;
+}
+
+static u8 __init uniq_ioapic_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return io_apic_get_unique_id(nr_ioapics, id);
+	else
+		return id;
+#else
+	int i;
+	DECLARE_BITMAP(used, 256);
+	bitmap_zero(used, 256);
+	for (i = 0; i < nr_ioapics; i++) {
+		struct mpc_ioapic *ia = &mp_ioapics[i];
+		__set_bit(ia->apicid, used);
+	}
+	if (!test_bit(id, used))
+		return id;
+	return find_first_zero_bit(used, 256);
+#endif
+}
+
+static int bad_ioapic(unsigned long address)
+{
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+	}
+	if (!address) {
+		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+		       " found in table, skipping!\n");
+		return 1;
+	}
+	return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+	int idx = 0;
+
+	if (bad_ioapic(address))
+		return;
+
+	idx = nr_ioapics;
+
+	mp_ioapics[idx].type = MP_IOAPIC;
+	mp_ioapics[idx].flags = MPC_APIC_USABLE;
+	mp_ioapics[idx].apicaddr = address;
+
+	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
+#ifdef CONFIG_X86_32
+	mp_ioapics[idx].apicver = io_apic_get_version(idx);
+#else
+	mp_ioapics[idx].apicver = 0;
+#endif
+	/*
+	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+	 */
+	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
+	mp_ioapic_routing[idx].gsi_base = gsi_base;
+	mp_ioapic_routing[idx].gsi_end = gsi_base +
+	    io_apic_get_redir_entries(idx);
+
+	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
+	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
+
+	nr_ioapics++;
+}
+
+int __init acpi_probe_gsi(void)
+{
+	int idx;
+	int gsi;
+	int max_gsi = 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	if (!acpi_ioapic)
+		return 0;
+
+	max_gsi = 0;
+	for (idx = 0; idx < nr_ioapics; idx++) {
+		gsi = mp_ioapic_routing[idx].gsi_end;
+
+		if (gsi > max_gsi)
+			max_gsi = gsi;
+	}
+
+	return max_gsi + 1;
+}
+
+static void assign_to_mp_irq(struct mpc_intsrc *m,
+				    struct mpc_intsrc *mp_irq)
+{
+	memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
+}
+
+static int mp_irq_cmp(struct mpc_intsrc *mp_irq,
+				struct mpc_intsrc *m)
+{
+	return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
+}
+
+static void save_mp_irq(struct mpc_intsrc *m)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (!mp_irq_cmp(&mp_irqs[i], m))
+			return;
+	}
+
+	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!!\n");
+}
+
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+{
+	int ioapic;
+	int pin;
+	struct mpc_intsrc mp_irq;
+
+	/*
+	 * Convert 'gsi' to 'ioapic.pin'.
+	 */
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0)
+		return;
+	pin = mp_find_ioapic_pin(ioapic, gsi);
+
+	/*
+	 * TBD: This check is for faulty timer entries, where the override
+	 *      erroneously sets the trigger to level, resulting in a HUGE
+	 *      increase of timer interrupts!
+	 */
+	if ((bus_irq == 0) && (trigger == 3))
+		trigger = 1;
+
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (trigger << 2) | polarity;
+	mp_irq.srcbus = MP_ISA_BUS;
+	mp_irq.srcbusirq = bus_irq;	/* IRQ */
+	mp_irq.dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */
+	mp_irq.dstirq = pin;	/* INTIN# */
+
+	save_mp_irq(&mp_irq);
+}
+
+void __init mp_config_acpi_legacy_irqs(void)
+{
+	int i;
+	int ioapic;
+	unsigned int dstapic;
+	struct mpc_intsrc mp_irq;
+
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+	/*
+	 * Fabricate the legacy ISA bus (bus #31).
+	 */
+	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+	set_bit(MP_ISA_BUS, mp_bus_not_pci);
+	pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
+
+#ifdef CONFIG_X86_ES7000
+	/*
+	 * Older generations of ES7000 have no legacy identity mappings
+	 */
+	if (es7000_plat == 1)
+		return;
+#endif
+
+	/*
+	 * Locate the IOAPIC that manages the ISA IRQs (0-15).
+	 */
+	ioapic = mp_find_ioapic(0);
+	if (ioapic < 0)
+		return;
+	dstapic = mp_ioapics[ioapic].apicid;
+
+	/*
+	 * Use the default configuration for the IRQs 0-15.  Unless
+	 * overridden by (MADT) interrupt source override entries.
+	 */
+	for (i = 0; i < 16; i++) {
+		int idx;
+
+		for (idx = 0; idx < mp_irq_entries; idx++) {
+			struct mpc_intsrc *irq = mp_irqs + idx;
+
+			/* Do we already have a mapping for this ISA IRQ? */
+			if (irq->srcbus == MP_ISA_BUS && irq->srcbusirq == i)
+				break;
+
+			/* Do we already have a mapping for this IOAPIC pin */
+			if (irq->dstapic == dstapic && irq->dstirq == i)
+				break;
+		}
+
+		if (idx != mp_irq_entries) {
+			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+			continue;	/* IRQ already used */
+		}
+
+		mp_irq.type = MP_INTSRC;
+		mp_irq.irqflag = 0;	/* Conforming */
+		mp_irq.srcbus = MP_ISA_BUS;
+		mp_irq.dstapic = dstapic;
+		mp_irq.irqtype = mp_INT;
+		mp_irq.srcbusirq = i; /* Identity mapped */
+		mp_irq.dstirq = i;
+
+		save_mp_irq(&mp_irq);
+	}
+}
+
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
+{
+	int ioapic;
+	int ioapic_pin;
+#ifdef CONFIG_X86_32
+#define MAX_GSI_NUM	4096
+#define IRQ_COMPRESSION_START	64
+
+	static int pci_irq = IRQ_COMPRESSION_START;
+	/*
+	 * Mapping between Global System Interrupts, which
+	 * represent all possible interrupts, and IRQs
+	 * assigned to actual devices.
+	 */
+	static int gsi_to_irq[MAX_GSI_NUM];
+#else
+
+	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+		return gsi;
+#endif
+
+	/* Don't set up the ACPI SCI because it's already set up */
+	if (acpi_gbl_FADT.sci_interrupt == gsi)
+		return gsi;
+
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0) {
+		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+		return gsi;
+	}
+
+	ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
+
+#ifdef CONFIG_X86_32
+	if (ioapic_renumber_irq)
+		gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
+
+	/*
+	 * Avoid pin reprogramming.  PRTs typically include entries
+	 * with redundant pin->gsi mappings (but unique PCI devices);
+	 * we only program the IOAPIC on the first.
+	 */
+	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
+		printk(KERN_ERR "Invalid reference to IOAPIC pin "
+		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+		       ioapic_pin);
+		return gsi;
+	}
+	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+		pr_debug("Pin %d-%d already programmed\n",
+			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+#ifdef CONFIG_X86_32
+		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
+#else
+		return gsi;
+#endif
+	}
+
+	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
+#ifdef CONFIG_X86_32
+	/*
+	 * For GSI >= 64, use IRQ compression
+	 */
+	if ((gsi >= IRQ_COMPRESSION_START)
+	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
+		/*
+		 * For PCI devices assign IRQs in order, avoiding gaps
+		 * due to unused I/O APIC pins.
+		 */
+		int irq = gsi;
+		if (gsi < MAX_GSI_NUM) {
+			/*
+			 * Retain the VIA chipset work-around (gsi > 15), but
+			 * avoid a problem where the 8254 timer (IRQ0) is setup
+			 * via an override (so it's not on pin 0 of the ioapic),
+			 * and at the same time, the pin 0 interrupt is a PCI
+			 * type.  The gsi > 15 test could cause these two pins
+			 * to be shared as IRQ0, and they are not shareable.
+			 * So test for this condition, and if necessary, avoid
+			 * the pin collision.
+			 */
+			gsi = pci_irq++;
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_gbl_FADT.sci_interrupt)
+				gsi = pci_irq++;
+			gsi_to_irq[irq] = gsi;
+		} else {
+			printk(KERN_ERR "GSI %u is too high\n", gsi);
+			return gsi;
+		}
+	}
+#endif
+	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+	return gsi;
+}
+
+int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+			u32 gsi, int triggering, int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+	struct mpc_intsrc mp_irq;
+	int ioapic;
+
+	if (!acpi_ioapic)
+		return 0;
+
+	/* print the entry should happen on mptable identically */
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+	mp_irq.srcbus = number;
+	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+	ioapic = mp_find_ioapic(gsi);
+	mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+	save_mp_irq(&mp_irq);
+#endif
+	return 0;
+}
+
 /*
  * Parse IOAPIC related entries in MADT
  * returns 0 on success, < 0 on error
@@ -822,7 +1273,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 
 	count =
 	    acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
-				  NR_IRQ_VECTORS);
+				  nr_irqs);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX
 		       "Error parsing interrupt source overrides entry\n");
@@ -842,7 +1293,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 
 	count =
 	    acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src,
-				  NR_IRQ_VECTORS);
+				  nr_irqs);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
 		/* TBD: Cleanup to allow fallback to MPS */
@@ -858,6 +1309,33 @@ static inline int acpi_parse_madt_ioapic_entries(void)
 }
 #endif	/* !CONFIG_X86_IO_APIC */
 
+static void __init early_acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	int error;
+
+	if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+
+		/*
+		 * Parse MADT LAPIC entries
+		 */
+		error = early_acpi_parse_madt_lapic_addr_ovr();
+		if (!error) {
+			acpi_lapic = 1;
+			smp_found_config = 1;
+		}
+		if (error == -EINVAL) {
+			/*
+			 * Dell Precision Workstation 410, 610 come here.
+			 */
+			printk(KERN_ERR PREFIX
+			       "Invalid BIOS MADT, disabling ACPI\n");
+			disable_acpi();
+		}
+	}
+#endif
+}
+
 static void __init acpi_process_madt(void)
 {
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -872,7 +1350,7 @@ static void __init acpi_process_madt(void)
 		if (!error) {
 			acpi_lapic = 1;
 
-#ifdef CONFIG_X86_GENERICARCH
+#ifdef CONFIG_X86_BIGSMP
 			generic_bigsmp_probe();
 #endif
 			/*
@@ -881,11 +1359,11 @@ static void __init acpi_process_madt(void)
 			error = acpi_parse_madt_ioapic_entries();
 			if (!error) {
 				acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
-				acpi_irq_balance_set(NULL);
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
-				setup_apic_routing();
+				if (apic->setup_apic_routing)
+					apic->setup_apic_routing();
 			}
 		}
 		if (error == -EINVAL) {
@@ -896,13 +1374,33 @@ static void __init acpi_process_madt(void)
 			       "Invalid BIOS MADT, disabling ACPI\n");
 			disable_acpi();
 		}
+	} else {
+		/*
+ 		 * ACPI found no MADT, and so ACPI wants UP PIC mode.
+ 		 * In the event an MPS table was found, forget it.
+ 		 * Boot with "acpi=off" to use MPS on such a system.
+ 		 */
+		if (smp_found_config) {
+			printk(KERN_WARNING PREFIX
+				"No APIC-table, disabling MPS\n");
+			smp_found_config = 0;
+		}
 	}
+
+	/*
+	 * ACPI supports both logical (e.g. Hyper-Threading) and physical
+	 * processors, where MPS only supports physical.
+	 */
+	if (acpi_lapic && acpi_ioapic)
+		printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
+		       "information\n");
+	else if (acpi_lapic)
+		printk(KERN_INFO "Using ACPI for processor (LAPIC) "
+		       "configuration information\n");
 #endif
 	return;
 }
 
-#ifdef __i386__
-
 static int __init disable_acpi_irq(const struct dmi_system_id *d)
 {
 	if (!acpi_force) {
@@ -953,6 +1451,24 @@ static int __init force_acpi_ht(const struct dmi_system_id *d)
 }
 
 /*
+ * Force ignoring BIOS IRQ0 pin2 override
+ */
+static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
+{
+	/*
+	 * The ati_ixp4x0_rev() early PCI quirk should have set
+	 * the acpi_skip_timer_override flag already:
+	 */
+	if (!acpi_skip_timer_override) {
+		WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
+		pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+			d->ident);
+		acpi_skip_timer_override = 1;
+	}
+	return 0;
+}
+
+/*
  * If your system is blacklisted here, but you find that acpi=force
  * works for you, please contact acpi-devel@sourceforge.net
  */
@@ -1122,7 +1638,52 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 	{}
 };
 
-#endif				/* __i386__ */
+/* second table for DMI checks that should run after early-quirks */
+static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
+	/*
+	 * HP laptops which use a DSDT reporting as HP/SB400/10000,
+	 * which includes some code which overrides all temperature
+	 * trip points to 16C if the INTIN2 input of the I/O APIC
+	 * is enabled.  This input is incorrectly designated the
+	 * ISA IRQ 0 via an interrupt source override even though
+	 * it is wired to the output of the master 8259A and INTIN0
+	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
+	 * override in that cases.
+	 */
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP nx6115 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP NX6125 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP NX6325 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP 6715b laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+		     },
+	 },
+	{}
+};
 
 /*
  * acpi_boot_table_init() and acpi_boot_init()
@@ -1151,9 +1712,7 @@ int __init acpi_boot_table_init(void)
 {
 	int error;
 
-#ifdef __i386__
 	dmi_check_system(acpi_dmi_table);
-#endif
 
 	/*
 	 * If acpi_disabled, bail out
@@ -1190,8 +1749,28 @@ int __init acpi_boot_table_init(void)
 	return 0;
 }
 
+int __init early_acpi_boot_init(void)
+{
+	/*
+	 * If acpi_disabled, bail out
+	 * One exception: acpi=ht continues far enough to enumerate LAPICs
+	 */
+	if (acpi_disabled && !acpi_ht)
+		return 1;
+
+	/*
+	 * Process the Multiple APIC Description Table (MADT), if present
+	 */
+	early_acpi_process_madt();
+
+	return 0;
+}
+
 int __init acpi_boot_init(void)
 {
+	/* those are executed after early-quirks are executed */
+	dmi_check_system(acpi_dmi_table_late);
+
 	/*
 	 * If acpi_disabled, bail out
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs
@@ -1241,6 +1820,10 @@ static int __init parse_acpi(char *arg)
 			disable_acpi();
 		acpi_ht = 1;
 	}
+	/* acpi=rsdt use RSDT instead of XSDT */
+	else if (strcmp(arg, "rsdt") == 0) {
+		acpi_rsdt_forced = 1;
+	}
 	/* "acpi=noirq" disables ACPI interrupt routing */
 	else if (strcmp(arg, "noirq") == 0) {
 		acpi_noirq_set();
@@ -1261,6 +1844,20 @@ static int __init parse_pci(char *arg)
 }
 early_param("pci", parse_pci);
 
+int __init acpi_mps_check(void)
+{
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
+/* mptable code is not built-in*/
+	if (acpi_disabled || acpi_noirq) {
+		printk(KERN_WARNING "MPS support code is not built-in.\n"
+		       "Using acpi=off or acpi=noirq or pci=noacpi "
+		       "may have problem\n");
+		return 1;
+	}
+#endif
+	return 0;
+}
+
 #ifdef CONFIG_X86_IO_APIC
 static int __init parse_acpi_skip_timer_override(char *arg)
 {