X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Facpi%2Fboot.c;h=0a036dc6f9ff27f66eb31800dc973660283425c6;hb=9d2062b879495649bb525cf7979126da2e45d288;hp=c193ec3c695e66f2e3bfa223f513d7bbc83e45dd;hpb=e9c4ffb11f0b19005b5b9dc8481687a3637e5887;p=safe%2Fjmp%2Flinux-2.6 diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c193ec3..0a036dc 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -31,41 +31,27 @@ #include #include #include +#include #include #include +#include +#include #include #include #include -#include #include #include #include -#ifdef CONFIG_X86_LOCAL_APIC -# include -#endif - static int __initdata acpi_force = 0; u32 acpi_rsdt_forced; -#ifdef CONFIG_ACPI -int acpi_disabled = 0; -#else -int acpi_disabled = 1; -#endif +int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 - -#include - -#else /* X86 */ - -#ifdef CONFIG_X86_LOCAL_APIC -#include -#include -#endif /* CONFIG_X86_LOCAL_APIC */ - +# include +# include #endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ @@ -121,102 +107,19 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; */ char *__init __acpi_map_table(unsigned long phys, unsigned long size) { - unsigned long base, offset, mapped_size; - int idx; if (!phys || !size) return NULL; - if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT)) - return __va(phys); - - offset = phys & (PAGE_SIZE - 1); - mapped_size = PAGE_SIZE - offset; - clear_fixmap(FIX_ACPI_END); - set_fixmap(FIX_ACPI_END, phys); - base = fix_to_virt(FIX_ACPI_END); - - /* - * Most cases can be covered by the below. - */ - idx = FIX_ACPI_END; - while (mapped_size < size) { - if (--idx < FIX_ACPI_BEGIN) - return NULL; /* cannot handle this */ - phys += PAGE_SIZE; - clear_fixmap(idx); - set_fixmap(idx, phys); - mapped_size += PAGE_SIZE; - } - - return ((unsigned char *)base + offset); + return early_ioremap(phys, size); } - -#ifdef CONFIG_PCI_MMCONFIG - -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; - -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_mcfg_allocation *pci_mmcfg_config; -int pci_mmcfg_config_num; - -static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) +void __init __acpi_unmap_table(char *map, unsigned long size) { - if (!strcmp(mcfg->header.oem_id, "SGI")) - acpi_mcfg_64bit_base_addr = TRUE; - - return 0; -} - -int __init acpi_parse_mcfg(struct acpi_table_header *header) -{ - struct acpi_table_mcfg *mcfg; - unsigned long i; - int config_size; - - if (!header) - return -EINVAL; - - mcfg = (struct acpi_table_mcfg *)header; - - /* how many config structures do we have */ - pci_mmcfg_config_num = 0; - i = header->length - sizeof(struct acpi_table_mcfg); - while (i >= sizeof(struct acpi_mcfg_allocation)) { - ++pci_mmcfg_config_num; - i -= sizeof(struct acpi_mcfg_allocation); - }; - if (pci_mmcfg_config_num == 0) { - printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); - return -ENODEV; - } - - config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); - pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); - if (!pci_mmcfg_config) { - printk(KERN_WARNING PREFIX - "No memory for MCFG config tables\n"); - return -ENOMEM; - } - - memcpy(pci_mmcfg_config, &mcfg[1], config_size); - - acpi_mcfg_oem_check(mcfg); - - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && - !acpi_mcfg_64bit_base_addr) { - printk(KERN_ERR PREFIX - "MMCONFIG not in low 4GB of memory\n"); - kfree(pci_mmcfg_config); - pci_mmcfg_config_num = 0; - return -ENODEV; - } - } + if (!map || !size) + return; - return 0; + early_iounmap(map, size); } -#endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC static int __init acpi_parse_madt(struct acpi_table_header *table) @@ -239,7 +142,8 @@ static int __init acpi_parse_madt(struct acpi_table_header *table) madt->address); } - acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id); + default_acpi_madt_oem_check(madt->header.oem_id, + madt->header.oem_table_id); return 0; } @@ -260,6 +164,35 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled) } static int __init +acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end) +{ + struct acpi_madt_local_x2apic *processor = NULL; + + processor = (struct acpi_madt_local_x2apic *)header; + + if (BAD_MADT_ENTRY(processor, end)) + return -EINVAL; + + acpi_table_print_madt_entry(header); + +#ifdef CONFIG_X86_X2APIC + /* + * We need to register disabled CPU as well to permit + * counting disabled CPUs. This allows us to size + * cpus_possible_map more accurately, to permit + * to not preallocating memory for all NR_CPUS + * when we use CPU hotplug. + */ + acpi_register_lapic(processor->local_apic_id, /* APIC ID */ + processor->lapic_flags & ACPI_MADT_ENABLED); +#else + printk(KERN_WARNING PREFIX "x2apic entry ignored\n"); +#endif + + return 0; +} + +static int __init acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end) { struct acpi_madt_local_apic *processor = NULL; @@ -319,6 +252,25 @@ acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header, } static int __init +acpi_parse_x2apic_nmi(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_local_x2apic_nmi *x2apic_nmi = NULL; + + x2apic_nmi = (struct acpi_madt_local_x2apic_nmi *)header; + + if (BAD_MADT_ENTRY(x2apic_nmi, end)) + return -EINVAL; + + acpi_table_print_madt_entry(header); + + if (x2apic_nmi->lint != 1) + printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n"); + + return 0; +} + +static int __init acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end) { struct acpi_madt_local_apic_nmi *lapic_nmi = NULL; @@ -361,7 +313,7 @@ acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) /* * Parse Interrupt Source Override for the ACPI SCI */ -static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger, u32 gsi) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; @@ -381,7 +333,7 @@ static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) * If GSI is < 16, this will update its flags, * else it will create a new mp_irqs[] entry. */ - mp_override_legacy_irq(gsi, polarity, trigger, gsi); + mp_override_legacy_irq(bus_irq, polarity, trigger, gsi); /* * stash over-ride to indicate we've been here @@ -405,9 +357,10 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header, acpi_table_print_madt_entry(header); if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) { - acpi_sci_ioapic_setup(intsrc->global_irq, + acpi_sci_ioapic_setup(intsrc->source_irq, intsrc->inti_flags & ACPI_MADT_POLARITY_MASK, - (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2); + (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2, + intsrc->global_irq); return 0; } @@ -497,6 +450,20 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { *irq = gsi; + +#ifdef CONFIG_X86_IO_APIC + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + setup_IO_APIC_irq_extra(gsi); +#endif + + return 0; +} + +int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi) +{ + if (isa_irq >= 16) + return -1; + *gsi = isa_irq; return 0; } @@ -504,7 +471,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) * success: return IRQ number (>=0) * failure: return < 0 */ -int acpi_register_gsi(u32 gsi, int triggering, int polarity) +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) { unsigned int irq; unsigned int plat_gsi = gsi; @@ -514,17 +481,18 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - if (triggering == ACPI_LEVEL_SENSITIVE) + if (trigger == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } #endif #ifdef CONFIG_X86_IO_APIC if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) { - plat_gsi = mp_register_gsi(gsi, triggering, polarity); + plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); } #endif - acpi_gsi_to_irq(plat_gsi, &irq); + irq = plat_gsi; + return irq; } @@ -532,6 +500,26 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) * ACPI based hotplug support for CPU */ #ifdef CONFIG_ACPI_HOTPLUG_CPU +#include + +static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) +{ +#ifdef CONFIG_ACPI_NUMA + int nid; + + nid = acpi_get_node(handle); + if (nid == -1 || !node_online(nid)) + return; +#ifdef CONFIG_X86_64 + apicid_to_node[physid] = nid; + numa_set_node(cpu, nid); +#else /* CONFIG_X86_32 */ + apicid_2_node[physid] = nid; + cpu_to_node_map[cpu] = nid; +#endif + +#endif +} static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu) { @@ -590,7 +578,10 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu) goto free_new_map; } + acpi_processor_set_pdc(handle); + cpu = cpumask_first(new_map); + acpi_map_cpu2node(handle, cpu, physid); *pcpu = cpu; retval = 0; @@ -675,6 +666,7 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) } hpet_address = hpet_tbl->address.address; + hpet_blockid = hpet_tbl->sequence; /* * Some broken BIOSes advertise HPET at 0x0. We really do not @@ -823,6 +815,7 @@ static int __init early_acpi_parse_madt_lapic_addr_ovr(void) static int __init acpi_parse_madt_lapic_entries(void) { int count; + int x2count = 0; if (!cpu_has_apic) return -ENODEV; @@ -846,22 +839,28 @@ static int __init acpi_parse_madt_lapic_entries(void) count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_sapic, MAX_APICS); - if (!count) + if (!count) { + x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC, + acpi_parse_x2apic, MAX_APICS); count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, acpi_parse_lapic, MAX_APICS); - if (!count) { + } + if (!count && !x2count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); /* TBD: Cleanup to allow fallback to MPS */ return -ENODEV; - } else if (count < 0) { + } else if (count < 0 || x2count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } + x2count = + acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC_NMI, + acpi_parse_x2apic_nmi, 0); count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0); - if (count < 0) { + if (count < 0 || x2count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; @@ -877,102 +876,6 @@ static int __init acpi_parse_madt_lapic_entries(void) extern int es7000_plat; #endif -static struct { - int apic_id; - int gsi_base; - int gsi_end; - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); -} mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -static int bad_ioapic(unsigned long address) -{ - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in table, skipping!\n"); - return 1; - } - return 0; -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].type = MP_IOAPIC; - mp_ioapics[idx].flags = MPC_APIC_USABLE; - mp_ioapics[idx].apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 - mp_ioapics[idx].apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].apicver = 0; -#endif - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].apicid, - mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - int __init acpi_probe_gsi(void) { int idx; @@ -987,7 +890,7 @@ int __init acpi_probe_gsi(void) max_gsi = 0; for (idx = 0; idx < nr_ioapics; idx++) { - gsi = mp_ioapic_routing[idx].gsi_end; + gsi = mp_gsi_routing[idx].gsi_end; if (gsi > max_gsi) max_gsi = gsi; @@ -1034,7 +937,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) ioapic = mp_find_ioapic(gsi); if (ioapic < 0) return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + pin = mp_find_ioapic_pin(ioapic, gsi); /* * TBD: This check is for faulty timer entries, where the override @@ -1123,26 +1026,52 @@ void __init mp_config_acpi_legacy_irqs(void) } } -int mp_register_gsi(u32 gsi, int triggering, int polarity) +static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, + int polarity) { +#ifdef CONFIG_X86_MPPARSE + struct mpc_intsrc mp_irq; + struct pci_dev *pdev; + unsigned char number; + unsigned int devfn; int ioapic; - int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 + u8 pin; - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else + if (!acpi_ioapic) + return 0; + if (!dev) + return 0; + if (dev->bus != &pci_bus_type) + return 0; + + pdev = to_pci_dev(dev); + number = pdev->bus->number; + devfn = pdev->devfn; + pin = pdev->pin; + /* print the entry should happen on mptable identically */ + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); + mp_irq.srcbus = number; + mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + ioapic = mp_find_ioapic(gsi); + mp_irq.dstapic = mp_ioapics[ioapic].apicid; + mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); + + save_mp_irq(&mp_irq); +#endif + return 0; +} + +int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) +{ + int ioapic; + int ioapic_pin; + struct io_apic_irq_attr irq_attr; if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; -#endif /* Don't set up the ACPI SCI because it's already set up */ if (acpi_gbl_FADT.sci_interrupt == gsi) @@ -1154,100 +1083,29 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) return gsi; } - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + ioapic_pin = mp_find_ioapic_pin(ioapic, gsi); #ifdef CONFIG_X86_32 if (ioapic_renumber_irq) gsi = ioapic_renumber_irq(ioapic, gsi); #endif - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ if (ioapic_pin > MP_MAX_IOAPIC_PIN) { printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + "%d-%d\n", mp_ioapics[ioapic].apicid, ioapic_pin); return gsi; } - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - pr_debug("Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif - } - - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} -int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, - u32 gsi, int triggering, int polarity) -{ -#ifdef CONFIG_X86_MPPARSE - struct mpc_intsrc mp_irq; - int ioapic; + if (enable_update_mptable) + mp_config_acpi_gsi(dev, gsi, trigger, polarity); - if (!acpi_ioapic) - return 0; + set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin, + trigger == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + io_apic_set_pci_routing(dev, gsi, &irq_attr); - /* print the entry should happen on mptable identically */ - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | - (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); - mp_irq.srcbus = number; - mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); - ioapic = mp_find_ioapic(gsi); - mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id; - mp_irq.dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base; - - save_mp_irq(&mp_irq); -#endif - return 0; + return gsi; } /* @@ -1264,9 +1122,8 @@ static int __init acpi_parse_madt_ioapic_entries(void) * If MPS is present, it will handle them, * otherwise the system will stay in PIC mode */ - if (acpi_disabled || acpi_noirq) { + if (acpi_disabled || acpi_noirq) return -ENODEV; - } if (!cpu_has_apic) return -ENODEV; @@ -1306,9 +1163,10 @@ static int __init acpi_parse_madt_ioapic_entries(void) * pretend we got one so we can set the SCI flags. */ if (!acpi_sci_override_gsi) - acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0); + acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0, + acpi_gbl_FADT.sci_interrupt); - /* Fill in identity legacy mapings where no override */ + /* Fill in identity legacy mappings where no override */ mp_config_acpi_legacy_irqs(); count = @@ -1370,9 +1228,6 @@ static void __init acpi_process_madt(void) if (!error) { acpi_lapic = 1; -#ifdef CONFIG_X86_GENERICARCH - generic_bigsmp_probe(); -#endif /* * Parse MADT IO-APIC entries */ @@ -1382,9 +1237,6 @@ static void __init acpi_process_madt(void) acpi_ioapic = 1; smp_found_config = 1; -#ifdef CONFIG_X86_32 - setup_apic_routing(); -#endif } } if (error == -EINVAL) { @@ -1455,23 +1307,6 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d) } /* - * Limit ACPI to CPU enumeration for HT - */ -static int __init force_acpi_ht(const struct dmi_system_id *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", - d->ident); - disable_acpi(); - acpi_ht = 1; - } else { - printk(KERN_NOTICE - "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); - } - return 0; -} - -/* * Force ignoring BIOS IRQ0 pin2 override */ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) @@ -1491,7 +1326,7 @@ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) /* * If your system is blacklisted here, but you find that acpi=force - * works for you, please contact acpi-devel@sourceforge.net + * works for you, please contact linux-acpi@vger.kernel.org */ static struct dmi_system_id __initdata acpi_dmi_table[] = { /* @@ -1507,98 +1342,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, /* - * Boxes that need acpi=ht - */ - { - .callback = force_acpi_ht, - .ident = "FSC Primergy T850", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "HP VISUALIZE NT Workstation", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "Compaq Workstation W8000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), - DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ASUS CUR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ABIT i440BX-W83977", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ABIT "), - DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM Bladecenter", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eServer xSeries 360", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 330", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 440", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - }, - }, - - /* * Boxes that need ACPI PCI IRQ routing disabled */ { @@ -1723,16 +1466,10 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * if acpi_blacklisted() acpi_disabled = 1; * acpi_irq_model=... * ... - * - * return value: (currently ignored) - * 0: success - * !0: failure */ -int __init acpi_boot_table_init(void) +void __init acpi_boot_table_init(void) { - int error; - dmi_check_system(acpi_dmi_table); /* @@ -1740,15 +1477,14 @@ int __init acpi_boot_table_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return; /* * Initialize the ACPI boot-time table parser. */ - error = acpi_table_init(); - if (error) { + if (acpi_table_init()) { disable_acpi(); - return error; + return; } acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); @@ -1756,18 +1492,15 @@ int __init acpi_boot_table_init(void) /* * blacklist may disable ACPI entirely */ - error = acpi_blacklisted(); - if (error) { + if (acpi_blacklisted()) { if (acpi_force) { printk(KERN_WARNING PREFIX "acpi=force override\n"); } else { printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); disable_acpi(); - return error; + return; } } - - return 0; } int __init early_acpi_boot_init(void) @@ -1813,6 +1546,9 @@ int __init acpi_boot_init(void) acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet); + if (!acpi_noirq) + x86_init.pci.init = pci_acpi_init; + return 0; } @@ -1837,8 +1573,10 @@ static int __init parse_acpi(char *arg) } /* Limit ACPI just to boot-time to enable HT */ else if (strcmp(arg, "ht") == 0) { - if (!acpi_force) + if (!acpi_force) { + printk(KERN_WARNING "acpi=ht will be removed in Linux-2.6.35\n"); disable_acpi(); + } acpi_ht = 1; } /* acpi=rsdt use RSDT instead of XSDT */