X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fsh%2FKconfig;h=ebabe518e729dcdb95fa551b21a4e404bca9ba93;hb=984947dc64f82bc6cafa4d84ba1a139718f634a8;hp=563f8af08508db8e815a9126124e865803cfa294;hpb=640f7487a919dec4ea98b88a050331f6a4044ea9;p=safe%2Fjmp%2Flinux-2.6
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 563f8af..ebabe51 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,8 +8,12 @@ mainmenu "Linux/SuperH Kernel Configuration"
config SUPERH
def_bool y
select EMBEDDED
+ select HAVE_CLK
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_IOREMAP_PROT if MMU
+ select HAVE_ARCH_TRACEHOOK
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
@@ -18,10 +22,21 @@ config SUPERH
config SUPERH32
def_bool !SUPERH64
+ select HAVE_KPROBES
+ select HAVE_KRETPROBES
+ select HAVE_FUNCTION_TRACER
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_ARCH_KGDB
config SUPERH64
def_bool y if CPU_SH5
+config ARCH_DEFCONFIG
+ string
+ default "arch/sh/configs/shx3_defconfig" if SUPERH32
+ default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
config RWSEM_GENERIC_SPINLOCK
def_bool y
@@ -41,11 +56,17 @@ config GENERIC_HWEIGHT
config GENERIC_HARDIRQS
def_bool y
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
config GENERIC_IRQ_PROBE
def_bool y
+config GENERIC_GPIO
+ def_bool n
+
config GENERIC_CALIBRATE_DELAY
- def_bool y
+ bool
config GENERIC_IOMAP
bool
@@ -56,12 +77,26 @@ config GENERIC_TIME
config GENERIC_CLOCKEVENTS
def_bool n
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+
+config GENERIC_LOCKBREAK
+ def_bool y
+ depends on SMP && PREEMPT
+
config SYS_SUPPORTS_PM
bool
+ depends on !SMP
+
+config ARCH_SUSPEND_POSSIBLE
+ def_bool n
+
+config ARCH_HIBERNATION_POSSIBLE
+ def_bool n
config SYS_SUPPORTS_APM_EMULATION
bool
- select SYS_SUPPORTS_PM
+ select ARCH_SUSPEND_POSSIBLE
config SYS_SUPPORTS_SMP
bool
@@ -78,6 +113,10 @@ config STACKTRACE_SUPPORT
config LOCKDEP_SUPPORT
def_bool y
+config HAVE_LATENCYTOP_SUPPORT
+ def_bool y
+ depends on !SMP
+
config ARCH_HAS_ILOG2_U32
def_bool n
@@ -87,14 +126,13 @@ config ARCH_HAS_ILOG2_U64
config ARCH_NO_VIRT_TO_BUS
def_bool y
-config ARCH_SUPPORTS_AOUT
- def_bool y
-
config IO_TRAPPED
bool
source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
menu "System type"
#
@@ -153,6 +191,11 @@ config CPU_SUBTYPE_SH7619
# SH-2A Processor Support
+config CPU_SUBTYPE_SH7201
+ bool "Support SH7201 processor"
+ select CPU_SH2A
+ select CPU_HAS_FPU
+
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
@@ -281,7 +324,6 @@ config CPU_SUBTYPE_SH7723
select CPU_SH4A
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
help
Select SH7723 if you have an SH-MobileR2 CPU.
@@ -313,6 +355,7 @@ config CPU_SUBTYPE_SHX3
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
# SH4AL-DSP Processor Support
@@ -347,227 +390,10 @@ config CPU_SUBTYPE_SH5_103
endchoice
source "arch/sh/mm/Kconfig"
+
source "arch/sh/Kconfig.cpu"
-menu "Board support"
-
-config SOLUTION_ENGINE
- bool
-
-config SH_SOLUTION_ENGINE
- bool "SolutionEngine"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
- CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
- help
- Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
- SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
-config SH_7721_SOLUTION_ENGINE
- bool "SolutionEngine7721"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7721
- help
- Select 7721 SolutionEngine if configuring for a Hitachi SH7721
- evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
- bool "SolutionEngine7722"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7722
- help
- Select 7722 SolutionEngine if configuring for a Hitachi SH772
- evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
- bool "SolutionEngine7751"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7751
- help
- Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evaluation board.
-
-config SH_7780_SOLUTION_ENGINE
- bool "SolutionEngine7780"
- select SOLUTION_ENGINE
- select SYS_SUPPORTS_PCI
- depends on CPU_SUBTYPE_SH7780
- help
- Select 7780 SolutionEngine if configuring for a Renesas SH7780
- evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
- bool "SolutionEngine7343"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7343
- help
- Select 7343 SolutionEngine if configuring for a Hitachi
- SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
- bool "SystemH7751R"
- depends on CPU_SUBTYPE_SH7751R
- help
- Select SystemH if you are configuring for a Renesas SystemH
- 7751R evaluation board.
-
-config SH_HP6XX
- bool "HP6XX"
- select SYS_SUPPORTS_APM_EMULATION
- select HD6446X_SERIES
- depends on CPU_SUBTYPE_SH7709
- help
- Select HP6XX if configuring for a HP jornada HP6xx.
- More information (hardware only) at
- .
-
-config SH_DREAMCAST
- bool "Dreamcast"
- select SYS_SUPPORTS_PCI
- depends on CPU_SUBTYPE_SH7091
- help
- Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at
-
-config SH_MPC1211
- bool "Interface MPC1211"
- depends on CPU_SUBTYPE_SH7751 && BROKEN
- help
- CTP/PCI-SH02 is a CPU module computer that is produced
- by Interface Corporation.
- More information at
-
-config SH_SH03
- bool "Interface CTP/PCI-SH03"
- depends on CPU_SUBTYPE_SH7751
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- CTP/PCI-SH03 is a CPU module computer that is produced
- by Interface Corporation.
- More information at
-
-config SH_SECUREEDGE5410
- bool "SecureEdge5410"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- Select SecureEdge5410 if configuring for a SnapGear SH board.
- This includes both the OEM SecureEdge products as well as the
- SME product line.
-
-config SH_RTS7751R2D
- bool "RTS7751R2D"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
- help
- Select RTS7751R2D if configuring for a Renesas Technology
- Sales SH-Graphics board.
-
-config SH_SDK7780
- bool "SDK7780R3"
- depends on CPU_SUBTYPE_SH7780
- select SYS_SUPPORTS_PCI
- help
- Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
- evaluation board.
-
-config SH_HIGHLANDER
- bool "Highlander"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
-
-config SH_MIGOR
- bool "Migo-R"
- depends on CPU_SUBTYPE_SH7722
- help
- Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_EDOSK7705
- bool "EDOSK7705"
- depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
- bool "SH4-202 MicroDev"
- depends on CPU_SUBTYPE_SH4_202
- help
- Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
- with an SH4-202 CPU.
-
-config SH_LANDISK
- bool "LANDISK"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- help
- I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
- bool "TITAN"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- Select Titan if you are configuring for a Nimble Microsystems
- NetEngine NP51R.
-
-config SH_SHMIN
- bool "SHMIN"
- depends on CPU_SUBTYPE_SH7706
- select CPU_HAS_IPR_IRQ
- help
- Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
- bool "L-BOX RE2"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- help
- Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
- bool "SH-X3 Prototype board"
- depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
- bool "Magic Panel R2"
- depends on CPU_SUBTYPE_SH7720
- help
- Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
- bool "Hitachi Cayman"
- depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
- select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
menu "Timer and clock configuration"
@@ -643,8 +469,12 @@ config SH_CPU_FREQ
depends on CPU_FREQ
select CPU_FREQ_TABLE
help
- This adds the cpufreq driver for SuperH. At present, only
- the SH-4 is supported.
+ This adds the cpufreq driver for SuperH. Any CPU that supports
+ clock rate rounding through the clock framework can use this
+ driver. While it will make the kernel slightly larger, this is
+ harmless for CPUs that don't support rate rounding. The driver
+ will also generate a notice in the boot log before disabling
+ itself if the CPU in question is not capable of rate rounding.
For details, take a look at .
@@ -656,10 +486,6 @@ source "arch/sh/drivers/Kconfig"
endmenu
-config ISA_DMA_API
- def_bool y
- depends on SH_MPC1211
-
menu "Kernel features"
source kernel/Kconfig.hz
@@ -695,9 +521,26 @@ config CRASH_DUMP
For more details see Documentation/kdump/kdump.txt
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via prctl, it cannot be disabled and the task is only
+ allowed to execute a few safe syscalls defined by each seccomp
+ mode.
+
+ If unsure, say N.
+
config SMP
bool "Symmetric multi-processing support"
depends on SYS_SUPPORTS_SMP
+ select USE_GENERIC_SMP_HELPERS
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -763,7 +606,7 @@ menu "Boot options"
config ZERO_PAGE_OFFSET
hex "Zero page offset"
- default "0x00004000" if SH_MPC1211 || SH_SH03
+ default "0x00004000" if SH_SH03
default "0x00010000" if PAGE_SIZE_64KB
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"
@@ -801,109 +644,25 @@ endmenu
menu "Bus options"
-# Even on SuperH devices which don't have an ISA bus,
-# this variable helps the PCMCIA modules handle
-# IRQ requesting properly -- Greg Banks.
-#
-# Though we're generally not interested in it when
-# we're not using PCMCIA, so we make it dependent on
-# PCMCIA outright. -- PFM.
-config ISA
- def_bool y
- depends on PCMCIA && HD6446X_SERIES
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. Other bus systems are PCI, EISA, MicroChannel
- (MCA) or VESA. ISA is an older system, now being displaced by PCI;
- newer boards don't support it. If you have ISA, say Y, otherwise N.
-
-config EISA
- bool
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-config MCA
- bool
- help
- MicroChannel Architecture is found in some IBM PS/2 machines and
- laptops. It is a bus system similar to PCI or ISA. See
- (and especially the web page given
- there) before attempting to build an MCA bus kernel.
-
-config SBUS
- bool
-
config SUPERHYWAY
tristate "SuperHyway Bus support"
depends on CPU_SUBTYPE_SH4_202
config MAPLE
- bool "Maple Bus support"
- depends on SH_DREAMCAST
- help
- The Maple Bus is SEGA's serial communication bus for peripherals
- on the Dreamcast. Without this bus support you won't be able to
- get your Dreamcast keyboard etc to work, so most users
- probably want to say 'Y' here, unless you are only using the
- Dreamcast with a serial line terminal or a remote network
- connection.
-
-config CF_ENABLER
- bool "Compact Flash Enabler support"
- depends on SOLUTION_ENGINE || SH_SH03
- ---help---
- Compact Flash is a small, removable mass storage device introduced
- in 1994 originally as a PCMCIA device. If you say `Y' here, you
- compile in support for Compact Flash devices directly connected to
- a SuperH processor. A Compact Flash FAQ is available at
- .
-
- If your board has "Directly Connected" CompactFlash at area 5 or 6,
- you may want to enable this option. Then, you can use CF as
- primary IDE drive (only tested for SanDisk).
-
- If in doubt, select 'N'.
-
-choice
- prompt "Compact Flash Connection Area"
- depends on CF_ENABLER
- default CF_AREA6
-
-config CF_AREA5
- bool "Area5"
+ bool "Maple Bus support"
+ depends on SH_DREAMCAST
help
- If your board has "Directly Connected" CompactFlash, You should
- select the area where your CF is connected to.
-
- - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
- - "Area6" if it is connected to Area 6 (0x18000000)
-
- "Area6" will work for most boards.
-
-config CF_AREA6
- bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
- hex
- depends on CF_ENABLER
- default "0xb8000000" if CF_AREA6
- default "0xb4000000" if CF_AREA5
+ The Maple Bus is SEGA's serial communication bus for peripherals
+ on the Dreamcast. Without this bus support you won't be able to
+ get your Dreamcast keyboard etc to work, so most users
+ probably want to say 'Y' here, unless you are only using the
+ Dreamcast with a serial line terminal or a remote network
+ connection.
source "arch/sh/drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
@@ -919,13 +678,11 @@ source "fs/Kconfig.binfmt"
endmenu
menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL && SYS_SUPPORTS_PM
+depends on EXPERIMENTAL
-config ARCH_SUSPEND_POSSIBLE
- def_bool y
- depends on !SMP
+source "kernel/power/Kconfig"
-source kernel/power/Kconfig
+source "drivers/cpuidle/Kconfig"
endmenu