X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fsh%2FKconfig;h=88cdeb9f72d90b682f8334c1543a287d26db3696;hb=b2b36316626f0d6b92c3675a2aa2726efc71d146;hp=88eb118e9fa66010c34497b2b4154377458b0b3e;hpb=4fa48e1774992fd03a4cd83a0f2adecb288c46f8;p=safe%2Fjmp%2Flinux-2.6 diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 88eb118..88cdeb9 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -10,11 +10,19 @@ config SUPERH select EMBEDDED select HAVE_CLK select HAVE_IDE + select HAVE_LMB select HAVE_OPROFILE select HAVE_GENERIC_DMA_COHERENT select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG + select HAVE_PERF_EVENTS + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA + select HAVE_SYSCALL_TRACEPOINTS + select RTC_LIB + select GENERIC_ATOMIC64 help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast @@ -28,9 +36,10 @@ config SUPERH32 select HAVE_FUNCTION_TRACER select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE + select HAVE_FUNCTION_TRACE_MCOUNT_TEST + select HAVE_FUNCTION_GRAPH_TRACER select HAVE_ARCH_KGDB select ARCH_HIBERNATION_POSSIBLE if MMU - select RTC_LIB config SUPERH64 def_bool ARCH = "sh64" @@ -50,6 +59,10 @@ config GENERIC_BUG def_bool y depends on BUG && SUPERH32 +config GENERIC_CSUM + def_bool y + depends on SUPERH64 + config GENERIC_FIND_NEXT_BIT def_bool y @@ -65,6 +78,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ config GENERIC_IRQ_PROBE def_bool y +config IRQ_PER_CPU + def_bool y + config GENERIC_GPIO def_bool n @@ -83,6 +99,10 @@ config GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS_BROADCAST bool +config GENERIC_CMOS_UPDATE + def_bool y + depends on SH_SH03 || SH_DREAMCAST + config GENERIC_LOCKBREAK def_bool y depends on SMP && PREEMPT @@ -101,6 +121,9 @@ config SYS_SUPPORTS_APM_EMULATION bool select ARCH_SUSPEND_POSSIBLE +config SYS_SUPPORTS_HUGETLBFS + bool + config SYS_SUPPORTS_SMP bool @@ -141,9 +164,8 @@ config ARCH_NO_VIRT_TO_BUS config ARCH_HAS_DEFAULT_IDLE def_bool y -config ARCH_USES_GETTIMEOFFSET - def_bool y - depends on SUPERH64 +config ARCH_HAS_CPU_IDLE_WAIT + def_bool y config IO_TRAPPED bool @@ -174,9 +196,9 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 select CPU_HAS_FPU if !CPU_SH4AL_DSP select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SH4A bool @@ -190,6 +212,8 @@ config CPU_SH4AL_DSP config CPU_SH5 bool select CPU_HAS_FPU + select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SHX2 bool @@ -200,6 +224,8 @@ config CPU_SHX3 config ARCH_SHMOBILE bool select ARCH_SUSPEND_POSSIBLE + select PM + select PM_RUNTIME if SUPERH32 @@ -301,6 +327,7 @@ config CPU_SUBTYPE_SH7720 bool "Support SH7720 processor" select CPU_SH3 select CPU_HAS_DSP + select SYS_SUPPORTS_CMT help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -308,6 +335,7 @@ config CPU_SUBTYPE_SH7721 bool "Support SH7721 processor" select CPU_SH3 select CPU_HAS_DSP + select SYS_SUPPORTS_CMT help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -375,6 +403,13 @@ config CPU_SUBTYPE_SH7724 help Select SH7724 if you have an SH-MobileR2R CPU. +config CPU_SUBTYPE_SH7757 + bool "Support SH7757 processor" + select CPU_SH4A + select CPU_SHX2 + help + Select SH7757 if you have a SH4A SH7757 CPU. + config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A @@ -403,6 +438,8 @@ config CPU_SUBTYPE_SH7786 select CPU_HAS_PTEAEX select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SMP + select GENERIC_CLOCKEVENTS_BROADCAST if SMP config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" @@ -470,16 +507,9 @@ source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" -config SH_TMU - bool "TMU timer support" - depends on CPU_SH3 || CPU_SH4 - default y - help - This enables the use of the TMU as the system timer. - config SH_TIMER_TMU bool "TMU timer driver" - depends on !SH_TMU && SYS_SUPPORTS_TMU + depends on SYS_SUPPORTS_TMU default y help This enables the build of the TMU timer driver. @@ -498,17 +528,6 @@ config SH_TIMER_MTU2 help This enables build of the MTU2 timer driver. -config SH_TIMER_IRQ - int - default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ - CPU_SUBTYPE_SH7763 - default "86" if CPU_SUBTYPE_SH7619 - default "140" if CPU_SUBTYPE_SH7206 - default "142" if CPU_SUBTYPE_SH7203 && SH_CMT - default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2 - default "238" if CPU_SUBTYPE_MXG - default "16" - config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" default "27000000" if CPU_SUBTYPE_SH7343 @@ -518,8 +537,7 @@ config SH_PCLK_FREQ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \ - CPU_SUBTYPE_SH7786 - default "41666666" if CPU_SUBTYPE_SH7724 + CPU_SUBTYPE_SH7786 || CPU_SUBTYPE_SH7724 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" @@ -528,6 +546,13 @@ config SH_PCLK_FREQ This is necessary for determining the reference clock value on platforms lacking an RTC. +config SH_CLK_CPG + def_bool y + +config SH_CLK_CPG_LEGACY + depends on SH_CLK_CPG + def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE + config SH_CLK_MD int "CPU Mode Pin Setting" depends on CPU_SH2 @@ -652,7 +677,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP - default "4" if CPU_SHX3 + default "4" if CPU_SUBTYPE_SHX3 default "2" help This allows you to specify the maximum number of CPUs which this @@ -688,27 +713,54 @@ config GUSA_RB LLSC, this should be more efficient than the other alternative of disabling interrupts around the atomic sequence. +config SPARSE_IRQ + bool "Support sparse irq numbering" + depends on EXPERIMENTAL + help + This enables support for sparse irqs. This is useful in general + as most CPUs have a fairly sparse array of IRQ vectors, which + the irq_desc then maps directly on to. Systems with a high + number of off-chip IRQs will want to treat this as + experimental until they have been independently verified. + + If you don't know what to do here, say N. + endmenu menu "Boot options" config ZERO_PAGE_OFFSET - hex "Zero page offset" - default "0x00004000" if SH_SH03 - default "0x00010000" if PAGE_SIZE_64KB + hex + default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \ + SH_7751_SOLUTION_ENGINE + default "0x00004000" if PAGE_SIZE_16KB || SH_SH03 default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" help This sets the default offset of zero page. config BOOT_LINK_OFFSET - hex "Link address offset for booting" + hex + default "0x00210000" if SH_SHMIN + default "0x00400000" if SH_CAYMAN + default "0x00810000" if SH_7780_SOLUTION_ENGINE + default "0x009e0000" if SH_TITAN + default "0x01800000" if SH_SDK7780 + default "0x02000000" if SH_EDOSK7760 default "0x00800000" help This option allows you to set the link address offset of the zImage. This can be useful if you are on a board which has a small amount of memory. +config ENTRY_OFFSET + hex + default "0x00001000" if PAGE_SIZE_4KB + default "0x00002000" if PAGE_SIZE_8KB + default "0x00004000" if PAGE_SIZE_16KB + default "0x00010000" if PAGE_SIZE_64KB + default "0x00000000" + config UBC_WAKEUP bool "Wakeup UBC on startup" depends on CPU_SH4 && !CPU_SH4A @@ -720,12 +772,31 @@ config UBC_WAKEUP If unsure, say N. -config CMDLINE_BOOL - bool "Default bootloader kernel arguments" +choice + prompt "Kernel command line" + optional + default CMDLINE_OVERWRITE + help + Setting this option allows the kernel command line arguments + to be set. + +config CMDLINE_OVERWRITE + bool "Overwrite bootloader kernel arguments" + help + Given string will overwrite any arguments passed in by + a bootloader. + +config CMDLINE_EXTEND + bool "Extend bootloader kernel arguments" + help + Given string will be concatenated with arguments passed in + by a bootloader. + +endchoice config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL + string "Kernel command line arguments string" + depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND default "console=ttySC1,115200" endmenu