X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fpowerpc%2FKconfig;h=66a315e06dce88691322901a7ab7c6d38c702f4b;hb=cc106eb35ed4abea675bce0d8fe40a46ff0b4a72;hp=3934e2659407b2769aaf81fba5c08a3873ed7fe0;hpb=f1f389d558d3884be565f152e9dd756e57b23d50;p=safe%2Fjmp%2Flinux-2.6 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3934e26..66a315e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -19,8 +19,8 @@ config WORD_SIZE default 64 if PPC64 default 32 if !PPC64 -config PPC_MERGE - def_bool y +config ARCH_PHYS_ADDR_T_64BIT + def_bool PPC64 || PHYS_64BIT config MMU bool @@ -42,20 +42,39 @@ config GENERIC_HARDIRQS bool default y +config GENERIC_HARDIRQS_NO__DO_IRQ + bool + default y + config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool PPC64 + config IRQ_PER_CPU bool default y +config NR_IRQS + int "Number of virtual interrupt numbers" + range 32 32768 + default "512" + help + This defines the number of virtual interrupt numbers the kernel + can manage. Virtual interrupt numbers are what you see in + /proc/interrupts. If you configure your system to have too few, + drivers will fail to load or worse - handle with care. + config STACKTRACE_SUPPORT bool default y +config HAVE_LATENCYTOP_SUPPORT + def_bool y + config TRACE_IRQFLAGS_SUPPORT bool - depends on PPC64 default y config LOCKDEP_SUPPORT @@ -86,10 +105,6 @@ config GENERIC_HWEIGHT bool default y -config GENERIC_CALIBRATE_DELAY - bool - default y - config GENERIC_FIND_NEXT_BIT bool default y @@ -105,11 +120,27 @@ config ARCH_NO_VIRT_TO_BUS config PPC bool default y + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_DYNAMIC_FTRACE + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_GRAPH_TRACER + select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_IDE - select HAVE_OPROFILE + select HAVE_IOREMAP_PROT + select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_KPROBES + select HAVE_ARCH_KGDB select HAVE_KRETPROBES + select HAVE_ARCH_TRACEHOOK select HAVE_LMB + select HAVE_DMA_ATTRS + select HAVE_DMA_API_DEBUG + select USE_GENERIC_SMP_HELPERS if SMP + select HAVE_OPROFILE + select HAVE_SYSCALL_WRAPPERS if PPC64 + select GENERIC_ATOMIC64 if PPC32 + select HAVE_PERF_EVENTS + select HAVE_REGS_AND_STACK_ACCESS_API config EARLY_PRINTK bool @@ -130,7 +161,7 @@ config GENERIC_NVRAM bool default y if PPC32 -config SCHED_NO_NO_OMIT_FRAME_POINTER +config SCHED_OMIT_FRAME_POINTER bool default y @@ -143,6 +174,7 @@ config PPC_OF config OF def_bool y + select OF_FLATTREE config PPC_UDBG_16550 bool @@ -166,6 +198,10 @@ config SYS_SUPPORTS_APM_EMULATION default y if PMAC_APM_EMU bool +config DTC + bool + default y + config DEFAULT_UIMAGE bool help @@ -175,24 +211,14 @@ config DEFAULT_UIMAGE config REDBOOT bool -config HIBERNATE_32 - bool - depends on (PPC_PMAC && !SMP) || BROKEN - default y - -config HIBERNATE_64 - bool - depends on BROKEN || (PPC_PMAC64 && EXPERIMENTAL) - default y - config ARCH_HIBERNATION_POSSIBLE bool - depends on (PPC64 && HIBERNATE_64) || (PPC32 && HIBERNATE_32) default y config ARCH_SUSPEND_POSSIBLE def_bool y - depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 + depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ + PPC_85xx || PPC_86xx config PPC_DCR_NATIVE bool @@ -213,8 +239,40 @@ config PPC_OF_PLATFORM_PCI depends on PPC64 # not supported on 32 bits yet default n +config ARCH_SUPPORTS_DEBUG_PAGEALLOC + def_bool y + +config PPC_ADV_DEBUG_REGS + bool + depends on 40x || BOOKE + default y + +config PPC_ADV_DEBUG_IACS + int + depends on PPC_ADV_DEBUG_REGS + default 4 if 44x + default 2 + +config PPC_ADV_DEBUG_DACS + int + depends on PPC_ADV_DEBUG_REGS + default 2 + +config PPC_ADV_DEBUG_DVCS + int + depends on PPC_ADV_DEBUG_REGS + default 2 if 44x + default 0 + +config PPC_ADV_DEBUG_DAC_RANGE + bool + depends on PPC_ADV_DEBUG_REGS && 44x + default y + source "init/Kconfig" +source "kernel/Kconfig.freezer" + source "arch/powerpc/sysdev/Kconfig" source "arch/powerpc/platforms/Kconfig" @@ -256,22 +314,19 @@ config 8XX_MINIMAL_FPEMU It is recommended that you build a soft-float userspace instead. -config IOMMU_VMERGE - bool "Enable IOMMU virtual merging" - depends on PPC64 - default y - help - Cause IO segments sent to a device for DMA to be merged virtually - by the IOMMU when they happen to have been allocated contiguously. - This doesn't add pressure to the IOMMU allocator. However, some - drivers don't support getting large merged segments coming back - from *_map_sg(). - - Most drivers don't have this problem; it is safe to say Y here. - config IOMMU_HELPER def_bool PPC64 +config SWIOTLB + bool "SWIOTLB support" + default n + select IOMMU_HELPER + ---help--- + Support for IO bounce buffering for systems without an IOMMU. + This allows us to DMA to the full physical address space on + platforms where the size of a physical address is larger + than the bus address. Not all platforms support this. + config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) @@ -281,6 +336,10 @@ config HOTPLUG_CPU Say N if you are unsure. +config ARCH_CPU_PROBE_RELEASE + def_bool y + depends on HOTPLUG_CPU + config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y @@ -292,7 +351,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_PRPMC2800 || PPC_MULTIPLATFORM) && EXPERIMENTAL + depends on PPC_BOOK3S && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -308,14 +367,13 @@ config KEXEC strongly in flux, so no good recommendation can be made. config CRASH_DUMP - bool "Build a kdump crash kernel (EXPERIMENTAL)" - depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL + bool "Build a kdump crash kernel" + depends on PPC64 || 6xx + select RELOCATABLE if PPC64 help Build a kernel suitable for use as a kdump capture kernel. - The kernel will be linked at a different address than normal, and - so can only be used for Kdump. - - Don't change this unless you know what you are doing. + The same kernel binary can be used as production kernel and dump + capture kernel. config PHYP_DUMP bool "Hypervisor-assisted dump (EXPERIMENTAL)" @@ -323,7 +381,7 @@ config PHYP_DUMP help Hypervisor-assisted dump is meant to be a kdump replacement offering robustness and speed not possible without system - hypervisor assistence. + hypervisor assistance. If unsure, say "N" @@ -340,6 +398,19 @@ config IRQ_ALL_CPUS CPU. Generally saying Y is safe, although some problems have been reported with SMP Power Macintoshes with this option enabled. +config SPARSE_IRQ + bool "Support sparse irq numbering" + default y + help + This enables support for sparse irqs. This is useful for distro + kernels that want to define a high CONFIG_NR_CPUS value but still + want to have low kernel memory footprint on smaller machines. + + ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread + out the irq_desc[] array in a more NUMA-friendly way. ) + + If you don't know what to do here, say Y. + config NUMA bool "NUMA support" depends on PPC64 @@ -347,9 +418,15 @@ config NUMA config NODES_SHIFT int + default "8" if PPC64 default "4" depends on NEED_MULTIPLE_NODES +config MAX_ACTIVE_REGIONS + int + default "256" if PPC64 + default "32" + config ARCH_SELECT_MEMORY_MODEL def_bool y depends on PPC64 @@ -370,6 +447,10 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_POPULATES_NODE_MAP def_bool y +config SYS_SUPPORTS_HUGETLBFS + def_bool y + depends on PPC_BOOK3S_64 + source "mm/Kconfig" config ARCH_MEMORY_PROBE @@ -390,21 +471,81 @@ config PPC_HAS_HASH_64K depends on PPC64 default n +config STDBINUTILS + bool "Using standard binutils settings" + depends on 44x + default y + help + Turning this option off allows you to select 256KB PAGE_SIZE on 44x. + Note, that kernel will be able to run only those applications, + which had been compiled using binutils later than 2.17.50.0.3 with + '-zmax-page-size' set to 256K (the default is 64K). Or, if using + the older binutils, you can patch them with a trivial patch, which + changes the ELF_MAXPAGESIZE definition from 0x10000 to 0x40000. + +choice + prompt "Page size" + default PPC_4K_PAGES + help + Select the kernel logical page size. Increasing the page size + will reduce software overhead at each page boundary, allow + hardware prefetch mechanisms to be more effective, and allow + larger dma transfers increasing IO efficiency and reducing + overhead. However the utilization of memory will increase. + For example, each cached file will using a multiple of the + page size to hold its contents and the difference between the + end of file and the end of page is wasted. + + Some dedicated systems, such as software raid serving with + accelerated calculations, have shown significant increases. + + If you configure a 64 bit kernel for 64k pages but the + processor does not support them, then the kernel will simulate + them with 4k pages, loading them on demand, but with the + reduced software overhead and larger internal fragmentation. + For the 32 bit kernel, a large page option will not be offered + unless it is supported by the configured processor. + + If unsure, choose 4K_PAGES. + +config PPC_4K_PAGES + bool "4k page size" + +config PPC_16K_PAGES + bool "16k page size" if 44x + config PPC_64K_PAGES - bool "64k page size" - depends on PPC64 - select PPC_HAS_HASH_64K + bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64 + select PPC_HAS_HASH_64K if PPC_STD_MMU_64 + +config PPC_256K_PAGES + bool "256k page size" if 44x + depends on !STDBINUTILS help - This option changes the kernel logical page size to 64k. On machines - without processor support for 64k pages, the kernel will simulate - them by loading each individual 4k page on demand transparently, - while on hardware with such support, it will be used to map - normal application pages. + Make the page size 256k. + + As the ELF standard only requires alignment to support page + sizes up to 64k, you will need to compile all of your user + space applications with a non-standard binutils settings + (see the STDBINUTILS description for details). + + Say N unless you know what you are doing. + +endchoice config FORCE_MAX_ZONEORDER int "Maximum zone order" - default "9" if PPC_64K_PAGES + range 9 64 if PPC64 && PPC_64K_PAGES + default "9" if PPC64 && PPC_64K_PAGES + range 13 64 if PPC64 && !PPC_64K_PAGES default "13" if PPC64 && !PPC_64K_PAGES + range 9 64 if PPC32 && PPC_16K_PAGES + default "9" if PPC32 && PPC_16K_PAGES + range 7 64 if PPC32 && PPC_64K_PAGES + default "7" if PPC32 && PPC_64K_PAGES + range 5 64 if PPC32 && PPC_256K_PAGES + default "5" if PPC32 && PPC_256K_PAGES + range 11 64 default "11" help The kernel memory allocator divides physically contiguous memory @@ -423,7 +564,7 @@ config FORCE_MAX_ZONEORDER config PPC_SUBPAGE_PROT bool "Support setting protections for 4k subpages" - depends on PPC_64K_PAGES + depends on PPC_STD_MMU_64 && PPC_64K_PAGES help This option adds support for a system call to allow user programs to set access permissions (read/write, readonly, or no access) @@ -458,6 +599,19 @@ config CMDLINE some command-line options at build time by entering them here. In most cases you will need to specify the root device here. +config EXTRA_TARGETS + string "Additional default image types" + help + List additional targets to be built by the bootwrapper here (separated + by spaces). This is useful for targets that depend of device tree + files in the .dts directory. + + Targets in this list will be build as part of the default build + target, or when the user does a 'make zImage' or a + 'make zImage.initrd'. + + If unsure, leave blank + if !44x || BROKEN config ARCH_WANTS_FREEZER_CONTROL def_bool y @@ -506,6 +660,12 @@ config ZONE_DMA bool default y +config NEED_DMA_MAP_STATE + def_bool (PPC64 || NOT_COHERENT_CACHE) + +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA bool depends on PPC64 || POWER4 || 6xx && !CPM2 @@ -529,6 +689,15 @@ config FSL_SOC config FSL_PCI bool select PPC_INDIRECT_PCI + select PCI_QUIRKS + +config FSL_PMC + bool + default y + depends on SUSPEND && (PPC_85xx || PPC_86xx) + help + Freescale MPC85xx/MPC86xx power management controller support + (suspend/resume). For MPC83xx see platforms/83xx/suspend.c config 4xx_SOC bool @@ -538,16 +707,26 @@ config FSL_LBC help Freescale Localbus support +config FSL_GTM + bool + depends on PPC_83xx || QUICC_ENGINE || CPM2 + help + Freescale General-purpose Timers support + # Yes MCA RS/6000s exist but Linux-PPC does not currently support any config MCA bool +# Platforms that what PCI turned unconditionally just do select PCI +# in their config node. Platforms that want to choose at config +# time should select PPC_PCI_CHOICE +config PPC_PCI_CHOICE + bool + config PCI - bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \ - || PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \ - || PPC_PS3 || 44x - default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \ - && !PPC_85xx && !PPC_86xx + bool "PCI support" if PPC_PCI_CHOICE + default y if !40x && !CPM2 && !8xx && !PPC_83xx \ + && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON default PCI_PERMEDIA if !4xx && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx select ARCH_SUPPORTS_MSI @@ -655,6 +834,23 @@ config LOWMEM_SIZE hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL default "0x30000000" +config LOWMEM_CAM_NUM_BOOL + bool "Set number of CAMs to use to map low memory" + depends on ADVANCED_OPTIONS && FSL_BOOKE + help + This option allows you to set the maximum number of CAM slots that + will be used to map low memory. There are a limited number of slots + available and even more limited number that will fit in the L1 MMU. + However, using more entries will allow mapping more low memory. This + can be useful in optimizing the layout of kernel virtual memory. + + Say N here unless you know what you are doing. + +config LOWMEM_CAM_NUM + depends on FSL_BOOKE + int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL + default 3 + config RELOCATABLE bool "Build a relocatable kernel (EXPERIMENTAL)" depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE @@ -719,7 +915,7 @@ config PHYSICAL_START config PHYSICAL_ALIGN hex - default "0x10000000" if FSL_BOOKE + default "0x04000000" if FSL_BOOKE help This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an @@ -740,19 +936,6 @@ config TASK_SIZE default "0x80000000" if PPC_PREP || PPC_8xx default "0xc0000000" -config CONSISTENT_START_BOOL - bool "Set custom consistent memory pool address" - depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE - help - This option allows you to set the base virtual address - of the consistent memory pool. This pool of virtual - memory is used to make consistent memory allocations. - -config CONSISTENT_START - hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL - default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx) - default "0xff100000" if NOT_COHERENT_CACHE - config CONSISTENT_SIZE_BOOL bool "Set custom consistent memory pool size" depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE @@ -771,16 +954,27 @@ config PIN_TLB endmenu if PPC64 +config RELOCATABLE + bool "Build a relocatable kernel" + help + This builds a kernel image that is capable of running anywhere + in the RMA (real memory area) at any 16k-aligned base address. + The kernel is linked as a position-independent executable (PIE) + and contains dynamic relocations which are processed early + in the bootup process. + + One use is for the kexec on panic case where the recovery kernel + must live at a different physical address than the primary + kernel. + config PAGE_OFFSET hex default "0xc000000000000000" config KERNEL_START hex - default "0xc000000002000000" if CRASH_DUMP default "0xc000000000000000" config PHYSICAL_START hex - default "0x02000000" if CRASH_DUMP default "0x00000000" endif @@ -790,10 +984,6 @@ source "drivers/Kconfig" source "fs/Kconfig" -# XXX source "arch/ppc/8xx_io/Kconfig" - -# XXX source "arch/ppc/8260_io/Kconfig" - source "arch/powerpc/sysdev/qe_lib/Kconfig" source "lib/Kconfig" @@ -812,6 +1002,7 @@ source "crypto/Kconfig" config PPC_CLOCK bool default n + select HAVE_CLK config PPC_LIB_RHEAP bool