X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fmicroblaze%2FMakefile;h=72f6e85837467679354d37ec148db56eb4868363;hb=598acab44dcbda0e300d9d080e81566334138e7d;hp=ee302f9f588d9a8c65b968a43bf6c2008d0c15da;hpb=04e3a553e0cbed369e5649c472ac317b6c45215d;p=safe%2Fjmp%2Flinux-2.6

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index ee302f9..72f6e85 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -1,15 +1,21 @@
+ifeq ($(CONFIG_MMU),y)
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+else
 UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+endif
 
 # What CPU vesion are we building for, and crack it open
 # as major.minor.rev
-CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
-CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
-CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
-CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+CPU_VER   := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
+CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV   := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
 
 export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
 
 # Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
 
 # Work out HW multipler support.  This is icky.
 # 1. Spartan2 has no HW multiplers.
@@ -30,40 +36,63 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
-# The various CONFIG_XILINX cpu features options are integers 0/1/2...
-# rather than bools y/n
-CFLAGS += $(CPUFLAGS-1)
-CFLAGS += $(CPUFLAGS-2)
-
 # r31 holds current when in kernel mode
-CFLAGS += -ffixed-r31
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+
+LDFLAGS		:=
+LDFLAGS_vmlinux	:=
 
-LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+head-y := arch/microblaze/kernel/head.o
+libs-y += arch/microblaze/lib/
+libs-y += $(LIBGCC)
+core-y += arch/microblaze/kernel/
+core-y += arch/microblaze/mm/
+core-y += arch/microblaze/platform/
+core-$(CONFIG_PCI) += arch/microblaze/pci/
 
-head-y		:= arch/microblaze/kernel/head.o
-libs-y		+= arch/microblaze/lib/ $(LIBGCC)
-core-y		+= arch/microblaze/kernel/ arch/microblaze/mm/ \
-		   arch/microblaze/platform/
+drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
 
-boot := arch/$(ARCH)/boot
+boot := arch/microblaze/boot
+
+# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
+DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
+
+ifneq ($(DTB),)
+	core-y	+= $(boot)/
+endif
 
 # defines filename extension depending memory management type
 ifeq ($(CONFIG_MMU),)
-MMUEXT		:= -nommu
+MMU := -nommu
 endif
-export	MMUEXT
+
+export MMU DTB
 
 all: linux.bin
 
+BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.%
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-linux.bin linux.bin.gz: vmlinux
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 define archhelp
-  echo  '* linux.bin    - Create raw binary'
-  echo  '  linux.bin.gz - Create compressed raw binary'
+  echo '* linux.bin    - Create raw binary'
+  echo '  linux.bin.gz - Create compressed raw binary'
+  echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
+  echo '                   - stripped elf with fdt blob'
+  echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
+  echo '  *_defconfig      - Select default config from arch/microblaze/configs'
+  echo ''
+  echo '  Targets with <dt> embed a device tree blob inside the image'
+  echo '  These targets support board with firmware that does not'
+  echo '  support passing a device tree directly. Replace <dt> with the'
+  echo '  name of a dts file from the arch/microblaze/boot/dts/ directory'
+  echo '  (minus the .dts extension).'
 endef
+
+MRPROPER_FILES += $(boot)/simpleImage.*