X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fm68knommu%2FKconfig;h=e2201b90aa22a2dbbf136e65bb6821f65f934bb7;hb=d8e7b2b3ac5319fcee616488c628c2bbe7e2937b;hp=dbfcdc8e60879617abdaf5bc5d74fa09e8724c3b;hpb=3f22ab276b931b72ea04b184c155b34d0362bfc3;p=safe%2Fjmp%2Flinux-2.6 diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index dbfcdc8..e2201b9 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -5,19 +5,25 @@ mainmenu "uClinux/68k (w/o MMU) Kernel Configuration" -config M68KNOMMU +config M68K bool default y + select HAVE_IDE config MMU bool default n +config NO_DMA + bool + depends on !COLDFIRE + default y + config FPU bool default n -config UID16 +config ZONE_DMA bool default y @@ -29,12 +35,57 @@ config RWSEM_XCHGADD_ALGORITHM bool default n +config ARCH_HAS_ILOG2_U32 + bool + default n + +config ARCH_HAS_ILOG2_U64 + bool + default n + +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_GPIO + bool + default n + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_HARDIRQS + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y +config GENERIC_TIME + bool + default y + +config GENERIC_CMOS_UPDATE + bool + default y + +config TIME_LOW_RES + bool + default y + +config GENERIC_CLOCKEVENTS + bool + default n + +config NO_IOPORT + def_bool y + source "init/Kconfig" +source "kernel/Kconfig.freezer" + menu "Processor type and features" choice @@ -71,23 +122,41 @@ config M5206e help Motorola ColdFire 5206e processor support. +config M520x + bool "MCF520x" + select GENERIC_CLOCKEVENTS + help + Freescale Coldfire 5207/5208 processor support. + +config M523x + bool "MCF523x" + select GENERIC_CLOCKEVENTS + help + Freescale Coldfire 5230/1/2/4/5 processor support + config M5249 bool "MCF5249" help Motorola ColdFire 5249 processor support. -config M527x - bool "MCF527x" +config M5271 + bool "MCF5271" help - Freescale (Motorola) ColdFire 5270/5271/5274/5275 processor support. + Freescale (Motorola) ColdFire 5270/5271 processor support. config M5272 bool "MCF5272" help Motorola ColdFire 5272 processor support. +config M5275 + bool "MCF5275" + help + Freescale (Motorola) ColdFire 5274/5275 processor support. + config M528x bool "MCF528x" + select GENERIC_CLOCKEVENTS help Motorola ColdFire 5280/5282 processor support. @@ -96,6 +165,11 @@ config M5307 help Motorola ColdFire 5307 processor support. +config M532x + bool "MCF532x" + help + Freescale (Motorola) ColdFire 532x processor support. + config M5407 bool "MCF5407" help @@ -103,122 +177,53 @@ config M5407 endchoice -config COLDFIRE +config M527x bool - depends on (M5206 || M5206e || M5249 || M527x || M5272 || M528x || M5307 || M5407) + depends on (M5271 || M5275) + select GENERIC_CLOCKEVENTS default y -choice - prompt "CPU CLOCK Frequency" - default AUTO - -config CLOCK_AUTO - bool "AUTO" - ---help--- - Define the CPU clock frequency in use. On many boards you don't - really need to know, so you can select the AUTO option. On some - boards you need to know the real clock frequency to determine other - system timing (for example baud rate dividors, etc). Some processors - have an internal PLL and you can select a frequency to run at. - You need to know a little about the internals of your processor to - set this. If in doubt choose the AUTO option. - -config CLOCK_11MHz - bool "11MHz" - help - Select a 11MHz CPU clock frequency. - -config CLOCK_16MHz - bool "16MHz" - help - Select a 16MHz CPU clock frequency. - -config CLOCK_20MHz - bool "20MHz" - help - Select a 20MHz CPU clock frequency. - -config CLOCK_24MHz - bool "24MHz" - help - Select a 24MHz CPU clock frequency. - -config CLOCK_25MHz - bool "25MHz" - help - Select a 25MHz CPU clock frequency. - -config CLOCK_33MHz - bool "33MHz" - help - Select a 33MHz CPU clock frequency. - -config CLOCK_40MHz - bool "40MHz" - help - Select a 40MHz CPU clock frequency. - -config CLOCK_45MHz - bool "45MHz" - help - Select a 45MHz CPU clock frequency. - -config CLOCK_48MHz - bool "48MHz" - help - Select a 48MHz CPU clock frequency. - -config CLOCK_50MHz - bool "50MHz" - help - Select a 50MHz CPU clock frequency. - -config CLOCK_54MHz - bool "54MHz" - help - Select a 54MHz CPU clock frequency. - -config CLOCK_60MHz - bool "60MHz" - help - Select a 60MHz CPU clock frequency. - -config CLOCK_64MHz - bool "64MHz" - help - Select a 64MHz CPU clock frequency. - -config CLOCK_66MHz - bool "66MHz" - help - Select a 66MHz CPU clock frequency. - -config CLOCK_70MHz - bool "70MHz" - help - Select a 70MHz CPU clock frequency. - -config CLOCK_100MHz - bool "100MHz" - help - Select a 100MHz CPU clock frequency. - -config CLOCK_140MHz - bool "140MHz" - help - Select a 140MHz CPU clock frequency. - -config CLOCK_150MHz - bool "150MHz" - help - Select a 150MHz CPU clock frequency. +config COLDFIRE + bool + depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407) + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + default y -config CLOCK_166MHz - bool "166MHz" +config CLOCK_SET + bool "Enable setting the CPU clock frequency" + default n help - Select a 166MHz CPU clock frequency. - -endchoice + On some CPU's you do not need to know what the core CPU clock + frequency is. On these you can disable clock setting. On some + traditional 68K parts, and on all ColdFire parts you need to set + the appropriate CPU clock frequency. On these devices many of the + onboard peripherals derive their timing from the master CPU clock + frequency. + +config CLOCK_FREQ + int "Set the core clock frequency" + default "66666666" + depends on CLOCK_SET + help + Define the CPU clock frequency in use. This is the core clock + frequency, it may or may not be the same as the external clock + crystal fitted to your board. Some processors have an internal + PLL and can have their frequency programmed at run time, others + use internal dividers. In general the kernel won't setup a PLL + if it is fitted (there are some exceptions). This value will be + specific to the exact CPU that you are using. + +config CLOCK_DIV + int "Set the core/bus clock divide ratio" + default "1" + depends on CLOCK_SET + help + On many SoC style CPUs the master CPU clock is also used to drive + on-chip peripherals. The clock that is distributed to these + peripherals is sometimes a fixed ratio of the master clock + frequency. If so then set this to the divider ratio of the + master clock to the peripheral clock. If not sure then select 1. config OLDMASK bool "Old mask 5307 (1H55J) silicon" @@ -236,11 +241,23 @@ config PILOT3 Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. config XCOPILOT_BUGS - bool " (X)Copilot support" + bool "(X)Copilot support" depends on PILOT3 help Support the bugs of Xcopilot. +config UC5272 + bool 'Arcturus Networks uC5272 dimm board support' + depends on M5272 + help + Support for the Arcturus Networks uC5272 dimm board. + +config UC5282 + bool "Arcturus Networks uC5282 board support" + depends on M528x + help + Support for the Arcturus Networks uC5282 dimm board. + config UCSIMM bool "uCsimm module support" depends on M68EZ328 @@ -260,20 +277,20 @@ config DRAGEN2 Support for the DragenEngine II board. config DIRECT_IO_ACCESS - bool " Allow user to access IO directly" + bool "Allow user to access IO directly" depends on (UCSIMM || UCDIMM || DRAGEN2) help Disable the CPU internal registers protection in user mode, to allow a user application to read/write them. config INIT_LCD - bool " Initialize LCD" + bool "Initialize LCD" depends on (UCSIMM || UCDIMM || DRAGEN2) help Initialize the LCD controller of the 68x328 processor. config MEMORY_RESERVE - int " Memory reservation (MiB)" + int "Memory reservation (MiB)" depends on (UCSIMM || UCDIMM) help Reserve certain memory regions on 68x328 based boards. @@ -302,6 +319,18 @@ config ELITE help Support for the Motorola M5206eLITE board. +config M5208EVB + bool "Freescale M5208EVB board support" + depends on M520x + help + Support for the Freescale Coldfire M5208EVB. + +config M5235EVB + bool "Freescale M5235EVB support" + depends on M523x + help + Support for the Freescale M5235EVB board. + config M5249C3 bool "Motorola M5249C3 board support" depends on M5249 @@ -310,13 +339,13 @@ config M5249C3 config M5271EVB bool "Freescale (Motorola) M5271EVB board support" - depends on M527x + depends on M5271 help Support for the Freescale (Motorola) M5271EVB board. config M5275EVB bool "Freescale (Motorola) M5275EVB board support" - depends on M527x + depends on M5275 help Support for the Freescale (Motorola) M5275EVB board. @@ -332,6 +361,12 @@ config COBRA5272 help Support for the senTec COBRA5272 board. +config AVNET5282 + bool "Avnet 5282 board support" + depends on M528x + help + Support for the Avnet 5282 board. + config M5282EVB bool "Motorola M5282EVB board support" depends on M528x @@ -343,6 +378,24 @@ config COBRA5282 depends on M528x help Support for the senTec COBRA5282 board. + +config SOM5282EM + bool "EMAC.Inc SOM5282EM board support" + depends on M528x + help + Support for the EMAC.Inc SOM5282EM module. + +config WILDFIRE + bool "Intec Automation Inc. WildFire board support" + depends on M528x + help + Support for the Intec Automation Inc. WildFire. + +config WILDFIREMOD + bool "Intec Automation Inc. WildFire module support" + depends on M528x + help + Support for the Intec Automation Inc. WildFire module. config ARN5307 bool "Arnewsh 5307 board support" @@ -356,18 +409,24 @@ config M5307C3 help Support for the Motorola M5307C3 board. -config eLIA - bool "Moreton Bay eLIA board support" - depends on M5307 - help - Support for the Moreton Bay eLIA board. - config SECUREEDGEMP3 bool "SnapGear SecureEdge/MP3 platform support" depends on M5307 help Support for the SnapGear SecureEdge/MP3 platform. +config M5329EVB + bool "Freescale (Motorola) M5329EVB board support" + depends on M532x + help + Support for the Freescale (Motorola) M5329EVB board. + +config COBRA5329 + bool "senTec COBRA5329 board support" + depends on M532x + help + Support for the senTec COBRA5329 board. + config M5407C3 bool "Motorola M5407C3 board support" depends on M5407 @@ -410,8 +469,20 @@ config CPU16B help Support for the SNEHA CPU16B board. +config MOD5272 + bool "Netburner MOD-5272 board support" + depends on M5272 + help + Support for the Netburner MOD-5272 board. + +config SAVANTrosie1 + bool "Savant Rosie1 board support" + depends on M523x + help + Support for the Savant Rosie1 board. + config ROMFS_FROM_ROM - bool " ROMFS image not RAM resident" + bool "ROMFS image not RAM resident" depends on (NETtel || SNAPGEAR) help The ROMfs filesystem will stay resident in the FLASH/ROM, not be @@ -427,10 +498,10 @@ config ARNEWSH default y depends on (ARN5206 || ARN5307) -config MOTOROLA +config FREESCALE bool default y - depends on (M5206eC3 || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) + depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3) config HW_FEITH bool @@ -441,52 +512,81 @@ config senTec bool default y depends on (COBRA5272 || COBRA5282) + +config EMAC_INC + bool + default y + depends on (SOM5282EM) config SNEHA bool default y depends on CPU16B -config LARGE_ALLOCS - bool "Allow allocating large blocks (> 1MB) of memory" - help - Allow the slab memory allocator to keep chains for very large - memory sizes - upto 32MB. You may need this if your system has - a lot of RAM, and you need to able to allocate very large - contiguous chunks. If unsure, say N. - -choice - prompt "RAM size" - default AUTO - -config RAMAUTO - bool "AUTO" - ---help--- - Configure the RAM size on your platform. Many platforms can auto - detect this, on those choose the AUTO option. Otherwise set the - RAM size you intend using. - -config RAM4MB - bool "4MiB" - help - Set RAM size to be 4MiB. - -config RAM8MB - bool "8MiB" - help - Set RAM size to be 8MiB. +config SAVANT + bool + default y + depends on SAVANTrosie1 -config RAM16MB - bool "16MiB" - help - Set RAM size to be 16MiB. +config AVNET + bool + default y + depends on (AVNET5282) -config RAM32MB - bool "32MiB" +config 4KSTACKS + bool "Use 4Kb for kernel stacks instead of 8Kb" + default y help - Set RAM size to be 32MiB. - -endchoice + If you say Y here the kernel will use a 4Kb stacksize for the + kernel stack attached to each process/thread. This facilitates + running more threads on a system and also reduces the pressure + on the VM subsystem for higher order allocations. + +config HZ + int + default 1000 if CLEOPATRA + default 100 + +comment "RAM configuration" + +config RAMBASE + hex "Address of the base of RAM" + default "0" + help + Define the address that RAM starts at. On many platforms this is + 0, the base of the address space. And this is the default. Some + platforms choose to setup their RAM at other addresses within the + processor address space. + +config RAMSIZE + hex "Size of RAM (in bytes)" + default "0x400000" + help + Define the size of the system RAM. If you select 0 then the + kernel will try to probe the RAM size at runtime. This is not + supported on all CPU types. + +config VECTORBASE + hex "Address of the base of system vectors" + default "0" + help + Define the address of the system vectors. Commonly this is + put at the start of RAM, but it doesn't have to be. On ColdFire + platforms this address is programmed into the VBR register, thus + actually setting the address to use. + +config KERNELBASE + hex "Address of the base of kernel code" + default "0x400" + help + Typically on m68k systems the kernel will not start at the base + of RAM, but usually some small offset from it. Define the start + address of the kernel here. The most common setup will have the + processor vectors at the base of RAM and then the start of the + kernel. On some platforms some RAM is reserved for boot loaders + and the kernel starts after that. The 0x400 default was based on + a system with the RAM based at address 0, and leaving enough room + for the theoretical maximum number of 256 vectors. choice prompt "RAM bus width" @@ -494,7 +594,7 @@ choice config RAMAUTOBIT bool "AUTO" - ---help--- + help Select the physical RAM data bus size. Not needed on most platforms, so you can generally choose AUTO. @@ -515,6 +615,59 @@ config RAM32BIT endchoice +comment "ROM configuration" + +config ROM + bool "Specify ROM linker regions" + default n + help + Define a ROM region for the linker script. This creates a kernel + that can be stored in flash, with possibly the text, and data + regions being copied out to RAM at startup. + +config ROMBASE + hex "Address of the base of ROM device" + default "0" + depends on ROM + help + Define the address that the ROM region starts at. Some platforms + use this to set their chip select region accordingly for the boot + device. + +config ROMVEC + hex "Address of the base of the ROM vectors" + default "0" + depends on ROM + help + This is almost always the same as the base of the ROM. Since on all + 68000 type variants the vectors are at the base of the boot device + on system startup. + +config ROMVECSIZE + hex "Size of ROM vector region (in bytes)" + default "0x400" + depends on ROM + help + Define the size of the vector region in ROM. For most 68000 + variants this would be 0x400 bytes in size. Set to 0 if you do + not want a vector region at the start of the ROM. + +config ROMSTART + hex "Address of the base of system image in ROM" + default "0x400" + depends on ROM + help + Define the start address of the system image in ROM. Commonly this + is strait after the ROM vectors. + +config ROMSIZE + hex "Size of the ROM device" + default "0x100000" + depends on ROM + help + Size of the ROM device. On some platforms this is used to setup + the chip select that controls the boot ROM device. + choice prompt "Kernel executes from" ---help--- @@ -528,10 +681,18 @@ config RAMKERNEL config ROMKERNEL bool "ROM" help - The kernel will be resident in FLASH/ROM when running. + The kernel will be resident in FLASH/ROM when running. This is + often referred to as Execute-in-Place (XIP), since the kernel + code executes from the position it is stored in the FLASH/ROM. endchoice +if COLDFIRE +source "kernel/Kconfig.preempt" +endif + +source "kernel/time/Kconfig" + source "mm/Kconfig" endmenu @@ -541,25 +702,8 @@ config ISA_DMA_API depends on !M5272 default y -menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" - -config PCI - bool "PCI support" - help - Support for PCI bus. - -config COMEMPCI - bool "CO-MEM lite PCI controller support" - depends on (M5307 || M5407) - -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" -source "drivers/pci/hotplug/Kconfig" - -endmenu - menu "Executable file formats" source "fs/Kconfig.binfmt" @@ -575,6 +719,8 @@ config PM endmenu +source "net/Kconfig" + source "drivers/Kconfig" source "fs/Kconfig"