X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fblackfin%2Fmach-bf537%2Fboards%2Fstamp.c;h=9db6b40743e0ff052ffc2d6b124058332180b6da;hb=ba877d4491a06ae69d53981bc242ef97a8157026;hp=9c6fa70c4064297d977ae5d308ae4645946e369e;hpb=edf056417d11fe9321ec15a55bd128e4f4c73796;p=safe%2Fjmp%2Flinux-2.6

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9c6fa70..9db6b40 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -29,9 +29,12 @@
  */
 
 #include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -41,67 +44,57 @@
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
 #include <linux/usb/sl811.h>
+#include <linux/spi/mmc_spi.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
 #include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
+#include <asm/dpmc.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADDS-BF537-STAMP";
+const char bfin_board_name[] = "ADI BF537-STAMP";
 
 /*
  *  Driver needs to know address, irq and flag pin.
  */
 
-#define ISP1761_BASE       0x203C0000
-#define ISP1761_IRQ        IRQ_PF7
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-static struct resource bfin_isp1761_resources[] = {
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
 	[0] = {
-		.name	= "isp1761-regs",
-		.start  = ISP1761_BASE + 0x00000000,
-		.end    = ISP1761_BASE + 0x000fffff,
+		.start  = 0x203C0000,
+		.end    = 0x203C0000 + 0x000fffff,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = ISP1761_IRQ,
-		.end    = ISP1761_IRQ,
-		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_PF7,
+		.end    = IRQ_PF7,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
-static struct platform_device bfin_isp1761_device = {
-	.name           = "isp1761",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
-	.resource       = bfin_isp1761_resources,
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
 };
 
-static struct platform_device *bfin_isp1761_devices[] = {
-	&bfin_isp1761_device,
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760-hcd",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
 };
-
-int __init bfin_isp1761_init(void)
-{
-	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
-
-	printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
-	set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
-
-	return platform_add_devices(bfin_isp1761_devices, num_devices);
-}
-
-void __exit bfin_isp1761_exit(void)
-{
-	platform_device_unregister(&bfin_isp1761_device);
-}
-
-arch_initcall(bfin_isp1761_init);
 #endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -128,6 +121,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
 	{
@@ -165,6 +171,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -183,6 +197,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -190,10 +207,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB804,
+		.end	= 0x203FB804 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
@@ -314,8 +336,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -340,21 +367,100 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+	{
+		.name   = "linux kernel(nand)",
+		.size   = 0x400000,
+		.offset = 0,
+	}, {
+		.name   = "file system(nand)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+#endif
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 1
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+	else
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF3
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+	.chip = {
+		.chip_delay = 30,
+#ifdef CONFIG_MTD_PARTITIONS
+		.part_probe_types = part_probes,
+		.partitions = bfin_plat_nand_partitions,
+		.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+#endif
+	},
+	.ctrl = {
+		.cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
+		.dev_ready = bfin_plat_nand_dev_ready,
+	},
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+	.start = 0x20212000,
+	.end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+	.flags = IORESOURCE_IO,
+};
+
+static struct platform_device bfin_async_nand_device = {
+	.name = "gen_nand",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_plat_nand_resources,
+	.dev = {
+		.platform_data = &bfin_plat_nand_data,
+	},
+};
+
+static void bfin_plat_nand_init(void)
+{
+	gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
-		.size       = 0xE0000,
+		.name       = "linux kernel(nor)",
+		.size       = 0x180000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
-		.size       = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
+		.name       = "file system(nor)",
+		.size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "MAC Address",
+		.name       = "MAC Address(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = 0x3F0000,
 		.mask_flags = MTD_WRITEABLE,
@@ -382,24 +488,22 @@ static struct platform_device stamp_flash_device = {
 	.num_resources = 1,
 	.resource      = &stamp_flash_resource,
 };
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
+#endif
 
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
-		.size = 0xe0000,
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -409,7 +513,7 @@ static struct flash_platform_data bfin_spi_flash_data = {
 	.name = "m25p80",
 	.parts = bfin_spi_flash_partitions,
 	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
+	/* .type = "m25p64", */
 };
 
 /* SPI flash chip (m25p64) */
@@ -419,8 +523,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -428,45 +532,167 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
 	.enable_dma = 0,
-	.bits_per_word = 16,
+	.bits_per_word = 8,
+	.cs_gpio = GPIO_PF5,
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
-	.bits_per_word = 8,
+#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+#include <linux/input.h>
+#include <linux/input/ad714x.h>
+static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static struct ad714x_slider_plat slider_plat[] = {
+	{
+		.start_stage = 0,
+		.end_stage = 7,
+		.max_coord = 128,
+	},
+};
+
+static struct ad714x_button_plat button_plat[] = {
+	{
+		.keycode = BTN_FORWARD,
+		.l_mask = 0,
+		.h_mask = 0x600,
+	},
+	{
+		.keycode = BTN_LEFT,
+		.l_mask = 0,
+		.h_mask = 0x500,
+	},
+	{
+		.keycode = BTN_MIDDLE,
+		.l_mask = 0,
+		.h_mask = 0x800,
+	},
+	{
+		.keycode = BTN_RIGHT,
+		.l_mask = 0x100,
+		.h_mask = 0x400,
+	},
+	{
+		.keycode = BTN_BACK,
+		.l_mask = 0x200,
+		.h_mask = 0x400,
+	},
+};
+static struct ad714x_platform_data ad7147_platfrom_data = {
+	.slider_num = 1,
+	.button_num = 5,
+	.slider = slider_plat,
+	.button = button_plat,
+	.stage_cfg_reg =  {
+		{0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+		{0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+		{0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
+		{0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
+		{0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
+		{0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
+	},
+	.sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
+#if defined(CONFIG_INPUT_EVAL_AD7142EB)
+#include <linux/input.h>
+#include <linux/input/ad714x.h>
+static struct ad714x_button_plat button_plat[] = {
+	{
+		.keycode = BTN_1,
+		.l_mask = 0,
+		.h_mask = 0x1,
+	},
+	{
+		.keycode = BTN_2,
+		.l_mask = 0,
+		.h_mask = 0x2,
+	},
+	{
+		.keycode = BTN_3,
+		.l_mask = 0,
+		.h_mask = 0x4,
+	},
+	{
+		.keycode = BTN_4,
+		.l_mask = 0x0,
+		.h_mask = 0x8,
+	},
+};
+static struct ad714x_platform_data ad7142_platfrom_data = {
+	.button_num = 4,
+	.button = button_plat,
+	.stage_cfg_reg =  {
+		/* fixme: figure out right setting for all comoponent according
+		 * to hardware feature of EVAL-AD7142EB board */
+		{0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+	},
+	.sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+
+static int bfin_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+		IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+	.init = bfin_mmc_spi_init,
+	.exit = bfin_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
-	.bits_per_word = 16,
+	.bits_per_word = 8,
+	.pio_interrupt = 0,
 };
 #endif
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#include <linux/spi/ad7877.h>
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -487,6 +713,67 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#include <linux/spi/ad7879.h>
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+	.model			= 7879,	/* Model = AD7879 */
+	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
+	.pressure_max		= 10000,
+	.pressure_min		= 0,
+	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
+	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
+	.median			= 2,	/* do 8 measurements */
+	.averaging 		= 1,	/* take the average of 4 middle samples */
+	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
+	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
+	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+};
+#endif
+
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
 	.enable_dma = 0,
@@ -494,6 +781,54 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+};
+#endif
+
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
+	.enable_dma	= 1,
+	.bits_per_word	= 8,
+	.cs_gpio = GPIO_PF10,
+};
+#endif
+
+#if defined(CONFIG_MTD_DATAFLASH) \
+	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name = "SPI Dataflash",
+	.parts = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
+/* DataFlash chip */
+static struct bfin5xx_spi_chip data_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -508,9 +843,20 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_MTD_DATAFLASH) \
+	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+	{	/* DataFlash chip */
+		.modalias = "mtd_dataflash",
+		.max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_dataflash_data,
+		.controller_data = &data_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -521,72 +867,51 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
 		.controller_data = &ad1836_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
 	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "ad1938",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
+		.chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+		.controller_data = &ad1938_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
+#endif
+
+#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
 	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "ad714x_captouch",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.irq = IRQ_PF4,
 		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
+		.chip_select = 5,
 		.mode = SPI_MODE_3,
+		.platform_data = &ad7147_platfrom_data,
+		.controller_data = &ad7147_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "ad5304_spi",
-		.max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 2,
-		.platform_data = NULL,
-		.controller_data = &ad5304_chip_info,
-		.mode = SPI_MODE_2,
+		.chip_select = 4,
+		.platform_data = &bfin_mmc_spi_pdata,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
 	},
 #endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
@@ -600,6 +925,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spi_ad7877_chip_info,
 	},
 #endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+	{
+		.modalias = "ad7879",
+		.platform_data = &bfin_ad7879_ts_info,
+		.irq = IRQ_PF7,
+		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spi_ad7879_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -609,8 +946,30 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 2,
+		.controller_data = &lq035q1_spi_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+	{
+		.modalias = "enc28j60",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.irq = IRQ_PF6,
+		.bus_num = 0,
+		.chip_select = 0,	/* GPIO controlled SSEL */
+		.controller_data = &enc28j60_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -628,6 +987,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -643,6 +1007,71 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */
 
+#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+
+/* SPORT SPI controller data */
+static struct bfin5xx_spi_master bfin_sport_spi0_info = {
+	.num_chipselect = 1, /* master only supports one device */
+	.enable_dma = 0,  /* master don't support DMA */
+	.pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
+		P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
+};
+
+static struct resource bfin_sport_spi0_resource[] = {
+	[0] = {
+		.start = SPORT0_TCR1,
+		.end   = SPORT0_TCR1 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = IRQ_SPORT0_ERROR,
+		.end   = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device bfin_sport_spi0_device = {
+	.name = "bfin-sport-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
+	.resource = bfin_sport_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_sport_spi0_info, /* Passed to driver */
+	},
+};
+
+static struct bfin5xx_spi_master bfin_sport_spi1_info = {
+	.num_chipselect = 1, /* master only supports one device */
+	.enable_dma = 0,  /* master don't support DMA */
+	.pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
+		P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
+};
+
+static struct resource bfin_sport_spi1_resource[] = {
+	[0] = {
+		.start = SPORT1_TCR1,
+		.end   = SPORT1_TCR1 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = IRQ_SPORT1_ERROR,
+		.end   = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device bfin_sport_spi1_device = {
+	.name = "bfin-sport-spi",
+	.id = 2, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
+	.resource = bfin_sport_spi1_resource,
+	.dev = {
+		.platform_data = &bfin_sport_spi1_info, /* Passed to driver */
+	},
+};
+
+#endif  /* sport spi master and devices */
+
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 static struct platform_device bfin_fb_device = {
 	.name = "bf537-lq035",
@@ -655,6 +1084,34 @@ static struct platform_device bfin_fb_adv7393_device = {
 };
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.use_bl = 	0,	/* let something else control the LCD Blacklight */
+	.gpio_bl =	GPIO_PF7,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource 	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -681,6 +1138,61 @@ static struct platform_device bfin_uart_device = {
 };
 #endif
 
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
 	[0] = {
@@ -703,6 +1215,291 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
+#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+#include <linux/input.h>
+#include <linux/i2c/adp5588.h>
+static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
+	[0]	 = KEY_GRAVE,
+	[1]	 = KEY_1,
+	[2]	 = KEY_2,
+	[3]	 = KEY_3,
+	[4]	 = KEY_4,
+	[5]	 = KEY_5,
+	[6]	 = KEY_6,
+	[7]	 = KEY_7,
+	[8]	 = KEY_8,
+	[9]	 = KEY_9,
+	[10]	 = KEY_0,
+	[11]	 = KEY_MINUS,
+	[12]	 = KEY_EQUAL,
+	[13]	 = KEY_BACKSLASH,
+	[15]	 = KEY_KP0,
+	[16]	 = KEY_Q,
+	[17]	 = KEY_W,
+	[18]	 = KEY_E,
+	[19]	 = KEY_R,
+	[20]	 = KEY_T,
+	[21]	 = KEY_Y,
+	[22]	 = KEY_U,
+	[23]	 = KEY_I,
+	[24]	 = KEY_O,
+	[25]	 = KEY_P,
+	[26]	 = KEY_LEFTBRACE,
+	[27]	 = KEY_RIGHTBRACE,
+	[29]	 = KEY_KP1,
+	[30]	 = KEY_KP2,
+	[31]	 = KEY_KP3,
+	[32]	 = KEY_A,
+	[33]	 = KEY_S,
+	[34]	 = KEY_D,
+	[35]	 = KEY_F,
+	[36]	 = KEY_G,
+	[37]	 = KEY_H,
+	[38]	 = KEY_J,
+	[39]	 = KEY_K,
+	[40]	 = KEY_L,
+	[41]	 = KEY_SEMICOLON,
+	[42]	 = KEY_APOSTROPHE,
+	[43]	 = KEY_BACKSLASH,
+	[45]	 = KEY_KP4,
+	[46]	 = KEY_KP5,
+	[47]	 = KEY_KP6,
+	[48]	 = KEY_102ND,
+	[49]	 = KEY_Z,
+	[50]	 = KEY_X,
+	[51]	 = KEY_C,
+	[52]	 = KEY_V,
+	[53]	 = KEY_B,
+	[54]	 = KEY_N,
+	[55]	 = KEY_M,
+	[56]	 = KEY_COMMA,
+	[57]	 = KEY_DOT,
+	[58]	 = KEY_SLASH,
+	[60]	 = KEY_KPDOT,
+	[61]	 = KEY_KP7,
+	[62]	 = KEY_KP8,
+	[63]	 = KEY_KP9,
+	[64]	 = KEY_SPACE,
+	[65]	 = KEY_BACKSPACE,
+	[66]	 = KEY_TAB,
+	[67]	 = KEY_KPENTER,
+	[68]	 = KEY_ENTER,
+	[69]	 = KEY_ESC,
+	[70]	 = KEY_DELETE,
+	[74]	 = KEY_KPMINUS,
+	[76]	 = KEY_UP,
+	[77]	 = KEY_DOWN,
+	[78]	 = KEY_RIGHT,
+	[79]	 = KEY_LEFT,
+};
+
+static struct adp5588_kpad_platform_data adp5588_kpad_data = {
+	.rows		= 8,
+	.cols		= 10,
+	.keymap		= adp5588_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5588_keymap),
+	.repeat		= 0,
+};
+#endif
+
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#include <linux/mfd/adp5520.h>
+
+	/*
+	 *  ADP5520/5501 Backlight Data
+	 */
+
+static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
+	.fade_in 		= FADE_T_1200ms,
+	.fade_out 		= FADE_T_1200ms,
+	.fade_led_law 		= BL_LAW_LINEAR,
+	.en_ambl_sens 		= 1,
+	.abml_filt 		= BL_AMBL_FILT_640ms,
+	.l1_daylight_max 	= BL_CUR_mA(15),
+	.l1_daylight_dim 	= BL_CUR_mA(0),
+	.l2_office_max 		= BL_CUR_mA(7),
+	.l2_office_dim 		= BL_CUR_mA(0),
+	.l3_dark_max 		= BL_CUR_mA(3),
+	.l3_dark_dim 		= BL_CUR_mA(0),
+	.l2_trip 		= L2_COMP_CURR_uA(700),
+	.l2_hyst 		= L2_COMP_CURR_uA(50),
+	.l3_trip 		= L3_COMP_CURR_uA(80),
+	.l3_hyst 		= L3_COMP_CURR_uA(20),
+};
+
+	/*
+	 *  ADP5520/5501 LEDs Data
+	 */
+
+#include <linux/leds.h>
+
+static struct led_info adp5520_leds[] = {
+	{
+		.name = "adp5520-led1",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
+	},
+#ifdef ADP5520_EN_ALL_LEDS
+	{
+		.name = "adp5520-led2",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
+	},
+	{
+		.name = "adp5520-led3",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
+	},
+#endif
+};
+
+static struct adp5520_leds_platfrom_data adp5520_leds_data = {
+	.num_leds = ARRAY_SIZE(adp5520_leds),
+	.leds = adp5520_leds,
+	.fade_in = FADE_T_600ms,
+	.fade_out = FADE_T_600ms,
+	.led_on_time = LED_ONT_600ms,
+};
+
+	/*
+	 *  ADP5520 GPIO Data
+	 */
+
+static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
+	.gpio_start = 50,
+	.gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+	.gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+};
+
+	/*
+	 *  ADP5520 Keypad Data
+	 */
+
+#include <linux/input.h>
+static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
+	[KEY(0, 0)]	= KEY_GRAVE,
+	[KEY(0, 1)]	= KEY_1,
+	[KEY(0, 2)]	= KEY_2,
+	[KEY(0, 3)]	= KEY_3,
+	[KEY(1, 0)]	= KEY_4,
+	[KEY(1, 1)]	= KEY_5,
+	[KEY(1, 2)]	= KEY_6,
+	[KEY(1, 3)]	= KEY_7,
+	[KEY(2, 0)]	= KEY_8,
+	[KEY(2, 1)]	= KEY_9,
+	[KEY(2, 2)]	= KEY_0,
+	[KEY(2, 3)]	= KEY_MINUS,
+	[KEY(3, 0)]	= KEY_EQUAL,
+	[KEY(3, 1)]	= KEY_BACKSLASH,
+	[KEY(3, 2)]	= KEY_BACKSPACE,
+	[KEY(3, 3)]	= KEY_ENTER,
+};
+
+static struct adp5520_keys_platfrom_data adp5520_keys_data = {
+	.rows_en_mask	= ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
+	.cols_en_mask	= COL_C3 | COL_C2 | COL_C1 | COL_C0,
+	.keymap		= adp5520_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
+	.repeat		= 0,
+};
+
+	/*
+	 *  ADP5520/5501 Multifuction Device Init Data
+	 */
+
+static struct adp5520_subdev_info adp5520_subdevs[] = {
+	{
+		.name = "adp5520-backlight",
+		.id = ID_ADP5520,
+		.platform_data = &adp5520_backlight_data,
+	},
+	{
+		.name = "adp5520-led",
+		.id = ID_ADP5520,
+		.platform_data = &adp5520_leds_data,
+	},
+	{
+		.name = "adp5520-gpio",
+		.id = ID_ADP5520,
+		.platform_data = &adp5520_gpio_data,
+	},
+	{
+		.name = "adp5520-keys",
+		.id = ID_ADP5520,
+		.platform_data = &adp5520_keys_data,
+	},
+};
+
+static struct adp5520_platform_data adp5520_pdev_data = {
+	.num_subdevs = ARRAY_SIZE(adp5520_subdevs),
+	.subdevs = adp5520_subdevs,
+};
+
+#endif
+
+#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+#include <linux/i2c/adp5588.h>
+static struct adp5588_gpio_platfrom_data adp5588_gpio_data = {
+	.gpio_start = 50,
+	.pullup_dis_mask = 0,
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_INPUT_EVAL_AD7142EB)
+	{
+		I2C_BOARD_INFO("ad7142_captouch", 0x2C),
+		.irq = IRQ_PG5,
+		.platform_data = (void *)&ad7142_platfrom_data,
+	},
+#endif
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PG6,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("ad7879", 0x2F),
+		.irq = IRQ_PG5,
+		.platform_data = (void *)&bfin_ad7879_ts_info,
+	},
+#endif
+#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+	{
+		I2C_BOARD_INFO("adp5588-keys", 0x34),
+		.irq = IRQ_PG0,
+		.platform_data = (void *)&adp5588_kpad_data,
+	},
+#endif
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+	{
+		I2C_BOARD_INFO("pmic-adp5520", 0x32),
+		.irq = IRQ_PG0,
+		.platform_data = (void *)&adp5520_pdev_data,
+	},
+#endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PG3,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
+#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+	{
+		I2C_BOARD_INFO("adp5588-gpio", 0x34),
+		.platform_data = (void *)&adp5588_gpio_data,
+	},
+#endif
+};
+
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
@@ -716,8 +1513,11 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
+#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
 
+#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+#define PATA_INT	IRQ_PF5
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 1,
 	.irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
@@ -740,6 +1540,26 @@ static struct resource bfin_pata_resources[] = {
 		.flags = IORESOURCE_IRQ,
 	},
 };
+#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 0,
+};
+/* CompactFlash Storage Card Memory Mapped Adressing
+ * /REG = A11 = 1
+ */
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x20211800,
+		.end = 0x20211807,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2021180E,	/* Device Ctl */
+		.end = 0x2021180E,
+		.flags = IORESOURCE_MEM,
+	},
+};
+#endif
 
 static struct platform_device bfin_pata_device = {
 	.name = "pata_platform",
@@ -752,7 +1572,44 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 	&bfin_pcmcia_cf_device,
 #endif
@@ -769,6 +1626,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&isp1362_hcd_device,
 #endif
 
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+	&bfin_isp1760_device,
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
@@ -782,6 +1643,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -793,10 +1655,19 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_spi0_device,
 #endif
 
+#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+	&bfin_sport_spi0_device,
+	&bfin_sport_spi1_device,
+#endif
+
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 	&bfin_fb_device,
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	&bfin_lq035q1_device,
+#endif
+
 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
 	&bfin_fb_adv7393_device,
 #endif
@@ -805,6 +1676,15 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_uart_device,
 #endif
 
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 	&i2c_bfin_twi_device,
 #endif
@@ -821,21 +1701,31 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
+
+	&bfin_gpios_device,
+
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+	&bfin_async_nand_device,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&stamp_flash_device,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
 };
 
 static int __init stamp_init(void)
 {
-	printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	bfin_plat_nand_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
@@ -845,7 +1735,7 @@ void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 /*