X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fblackfin%2Flib%2Fins.S;h=3edbd8db6598cacfa6bc6d6a4bf642338d4c613c;hb=b9c7eb498ddce1f77536707398b6175696570e80;hp=a17cc77ac36f2faefcf9ffa8d214691aa7682f2d;hpb=51be24c351bc9ee4937121100adb098eeb1effdd;p=safe%2Fjmp%2Flinux-2.6

diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index a17cc77..3edbd8d 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/lib/ins.S
- * Based on:
- * Author:       Bas Vermeulen <bas@buyways.nl>
+ * arch/blackfin/lib/ins.S - ins{bwl} using hardware loops
  *
- * Created:      Tue Mar 22 15:27:24 CEST 2005
- * Description:  Implementation of ins{bwl} for BlackFin processors using zero overhead loops.
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *               Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/linkage.h>
@@ -33,47 +11,108 @@
 
 .align 2
 
-ENTRY(_insl)
-	P0 = R0;	/* P0 = port */
-	cli R3;
-	P1 = R1;	/* P1 = address */
-	P2 = R2;	/* P2 = count */
-	SSYNC;
-	LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
-.Llong_loop_s:  R0 = [P0];
-		[P1++] = R0;
-		NOP;
-.Llong_loop_e: 	NOP;
-	sti R3;
-	RTS;
-ENDPROC(_insl)
+#ifdef CONFIG_IPIPE
+# define DO_CLI \
+	[--sp] = rets; \
+	[--sp] = (P5:0); \
+	sp += -12; \
+	call ___ipipe_disable_root_irqs_hw; \
+	sp += 12; \
+	(P5:0) = [sp++];
+# define CLI_INNER_NOP
+#else
+# define DO_CLI cli R3;
+# define CLI_INNER_NOP nop; nop; nop;
+#endif
+
+#ifdef CONFIG_IPIPE
+# define DO_STI \
+	sp += -12; \
+	call ___ipipe_enable_root_irqs_hw; \
+	sp += 12; \
+2:	rets = [sp++];
+#else
+# define DO_STI 2: sti R3;
+#endif
+
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
+# define CLI_OUTER DO_CLI;
+# define STI_OUTER DO_STI;
+# define CLI_INNER 1:
+# if ANOMALY_05000416
+#  define STI_INNER nop; 2: nop;
+# else
+#  define STI_INNER 2:
+# endif
+#else
+# define CLI_OUTER
+# define STI_OUTER
+# define CLI_INNER 1: DO_CLI; CLI_INNER_NOP;
+# define STI_INNER DO_STI;
+#endif
+
+/*
+ * Reads on the Blackfin are speculative. In Blackfin terms, this means they
+ * can be interrupted at any time (even after they have been issued on to the
+ * external bus), and re-issued after the interrupt occurs.
+ *
+ * If a FIFO is sitting on the end of the read, it will see two reads,
+ * when the core only sees one. The FIFO receives the read which is cancelled,
+ * and not delivered to the core.
+ *
+ * To solve this, interrupts are turned off before reads occur to I/O space.
+ * There are 3 versions of all these functions
+ *  - turns interrupts off every read (higher overhead, but lower latency)
+ *  - turns interrupts off every loop (low overhead, but longer latency)
+ *  - DMA version, which do not suffer from this issue. DMA versions have
+ *      different name (prefixed by dma_ ), and are located in
+ *      ../kernel/bfin_dma_5xx.c
+ * Using the dma related functions are recommended for transfering large
+ * buffers in/out of FIFOs.
+ */
+
+#define COMMON_INS(func, ops) \
+ENTRY(_ins##func) \
+	P0 = R0;	/* P0 = port */ \
+	CLI_OUTER;	/* 3 instructions before first read access */ \
+	P1 = R1;	/* P1 = address */ \
+	P2 = R2;	/* P2 = count */ \
+	SSYNC; \
+ \
+	LSETUP(1f, 2f) LC0 = P2; \
+	CLI_INNER; \
+	ops; \
+	STI_INNER; \
+ \
+	STI_OUTER; \
+	RTS; \
+ENDPROC(_ins##func)
+
+COMMON_INS(l, \
+	R0 = [P0]; \
+	[P1++] = R0; \
+)
+
+COMMON_INS(w, \
+	R0 = W[P0]; \
+	W[P1++] = R0; \
+)
+
+COMMON_INS(w_8, \
+	R0 = W[P0]; \
+	B[P1++] = R0; \
+	R0 = R0 >> 8; \
+	B[P1++] = R0; \
+)
 
-ENTRY(_insw)
-	P0 = R0;	/* P0 = port */
-	cli R3;
-	P1 = R1;	/* P1 = address */
-	P2 = R2;	/* P2 = count */
-	SSYNC;
-	LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
-.Lword_loop_s:  R0 = W[P0];
-		W[P1++] = R0;
-		NOP;
-.Lword_loop_e: 	NOP;
-	sti R3;
-	RTS;
-ENDPROC(_insw)
+COMMON_INS(b, \
+	R0 = B[P0]; \
+	B[P1++] = R0; \
+)
 
-ENTRY(_insb)
-	P0 = R0;	/* P0 = port */
-	cli R3;
-	P1 = R1;	/* P1 = address */
-	P2 = R2;	/* P2 = count */
-	SSYNC;
-	LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
-.Lbyte_loop_s:  R0 = B[P0];
-		B[P1++] = R0;
-		NOP;
-.Lbyte_loop_e:  NOP;
-	sti R3;
-	RTS;
-ENDPROC(_insb)
+COMMON_INS(l_16, \
+	R0 = [P0]; \
+	W[P1++] = R0; \
+	R0 = R0 >> 16; \
+	W[P1++] = R0; \
+)