X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fblackfin%2FKconfig;h=56ee44d7b2d95f5415eaca4bb93aa5b82f5ecf52;hb=172e65e778ad500da26d59965750966e1ac7be51;hp=cc2add7e39e7f59a9f1a763c9a5d7c11c025e123;hpb=4a88d0ce494034fbb8dd0076d80e71b38abf5748;p=safe%2Fjmp%2Flinux-2.6

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index cc2add7..56ee44d 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -26,6 +26,7 @@ config BLACKFIN
 	default y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ZONE_DMA
 	bool
@@ -59,13 +60,12 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config HARDWARE_PM
-	def_bool y
-	depends on OPROFILE
-
 source "init/Kconfig"
+
 source "kernel/Kconfig.preempt"
 
+source "kernel/Kconfig.freezer"
+
 menu "Blackfin Processor Options"
 
 comment "Processor and Board Settings"
@@ -74,6 +74,26 @@ choice
 	prompt "CPU"
 	default BF533
 
+config BF512
+	bool "BF512"
+	help
+	  BF512 Processor Support.
+
+config BF514
+	bool "BF514"
+	help
+	  BF514 Processor Support.
+
+config BF516
+	bool "BF516"
+	help
+	  BF516 Processor Support.
+
+config BF518
+	bool "BF518"
+	help
+	  BF518 Processor Support.
+
 config BF522
 	bool "BF522"
 	help
@@ -134,6 +154,16 @@ config BF537
 	help
 	  BF537 Processor Support.
 
+config BF538
+	bool "BF538"
+	help
+	  BF538 Processor Support.
+
+config BF539
+	bool "BF539"
+	help
+	  BF539 Processor Support.
+
 config BF542
 	bool "BF542"
 	help
@@ -162,20 +192,59 @@ config BF549
 config BF561
 	bool "BF561"
 	help
-	  Not Supported Yet - Work in progress - BF561 Processor Support.
+	  BF561 Processor Support.
 
 endchoice
 
+config SMP
+	depends on BF561
+	bool "Symmetric multi-processing support"
+	---help---
+	  This enables support for systems with more than one CPU,
+	  like the dual core BF561. If you have a system with only one
+	  CPU, say N. If you have a system with more than one CPU, say Y.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int
+	depends on SMP
+	default 2 if BF561
+
+config IRQ_PER_CPU
+	bool
+	depends on SMP
+	default y
+
+config TICK_SOURCE_SYSTMR0
+	bool
+	select BFIN_GPTIMERS
+	depends on SMP
+	default y
+
+config BF_REV_MIN
+	int
+	default 0 if (BF51x || BF52x || BF54x)
+	default 2 if (BF537 || BF536 || BF534)
+	default 3 if (BF561 ||BF533 || BF532 || BF531)
+	default 4 if (BF538 || BF539)
+
+config BF_REV_MAX
+	int
+	default 2 if (BF51x || BF52x || BF54x)
+	default 3 if (BF537 || BF536 || BF534)
+	default 5 if (BF561 || BF538 || BF539)
+	default 6 if (BF533 || BF532 || BF531)
+
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if BF527
-	default BF_REV_0_2 if BF537
-	default BF_REV_0_3 if BF533
-	default BF_REV_0_0 if BF549
+	default BF_REV_0_1 if (BF51x || BF52x || BF54x)
+	default BF_REV_0_2 if (BF534 || BF536 || BF537)
+	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
 
 config BF_REV_0_0
 	bool "0.0"
-	depends on (BF52x || BF54x)
+	depends on (BF51x || BF52x || BF54x)
 
 config BF_REV_0_1
 	bool "0.1"
@@ -183,7 +252,7 @@ config BF_REV_0_1
 
 config BF_REV_0_2
 	bool "0.2"
-	depends on (BF537 || BF536 || BF534)
+	depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
 
 config BF_REV_0_3
 	bool "0.3"
@@ -191,11 +260,15 @@ config BF_REV_0_3
 
 config BF_REV_0_4
 	bool "0.4"
-	depends on (BF561 || BF533 || BF532 || BF531)
+	depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
 
 config BF_REV_0_5
 	bool "0.5"
-	depends on (BF561 || BF533 || BF532 || BF531)
+	depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
+
+config BF_REV_0_6
+	bool "0.6"
+	depends on (BF533 || BF532 || BF531)
 
 config BF_REV_ANY
 	bool "any"
@@ -205,6 +278,11 @@ config BF_REV_NONE
 
 endchoice
 
+config BF51x
+	bool
+	depends on (BF512 || BF514 || BF516 || BF518)
+	default y
+
 config BF52x
 	bool
 	depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
@@ -239,7 +317,7 @@ config MEM_MT48LC16M16A2TG_75
 
 config MEM_MT48LC32M8A2_75
 	bool
-	depends on (BFIN537_STAMP || PNAV10)
+	depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
 	default y
 
 config MEM_MT48LC8M32B2B5_7
@@ -249,13 +327,15 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X)
+	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
 	default y
 
+source "arch/blackfin/mach-bf518/Kconfig"
 source "arch/blackfin/mach-bf527/Kconfig"
 source "arch/blackfin/mach-bf533/Kconfig"
 source "arch/blackfin/mach-bf561/Kconfig"
 source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf538/Kconfig"
 source "arch/blackfin/mach-bf548/Kconfig"
 
 menu "Board customizations"
@@ -286,13 +366,21 @@ config BOOT_LOAD
 	  memory region is used to capture NULL pointer references as well
 	  as some core kernel functions.
 
+config ROM_BASE
+	hex "Kernel ROM Base"
+	depends on ROMKERNEL
+	default "0x20040000"
+	range 0x20000000 0x20400000 if !(BF54x || BF561)
+	range 0x20000000 0x30000000 if (BF54x || BF561)
+	help
+
 comment "Clock/PLL Setup"
 
 config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	default "10000000" if BFIN532_IP0X
@@ -328,11 +416,11 @@ config VCO_MULT
 	range 1 64
 	default "22" if BFIN533_EZKIT
 	default "45" if BFIN533_STAMP
-	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
+	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
-	default "16" if H8606_HVSISTEMAS
+	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -368,14 +456,6 @@ config SCLK_DIV
 	  This can be between 1 and 15
 	  System Clock = (PLL frequency) / (this setting)
 
-config MAX_MEM_SIZE
-	int "Max SDRAM Memory Size in MBytes"
-	depends on !MPU
-	default 512
-	help
-	  This is the max memory size that the kernel will create CPLB
-	  tables for.  Your system will not be able to handle any more.
-
 choice
 	prompt "DDR SDRAM Chip Type"
 	depends on BFIN_KERNEL_CLOCK
@@ -389,11 +469,70 @@ config MEM_MT46V32M16_5B
 	bool "MT46V32M16_5B"
 endchoice
 
+choice
+	prompt "DDR/SDRAM Timing"
+	depends on BFIN_KERNEL_CLOCK
+	default BFIN_KERNEL_CLOCK_MEMINIT_CALC
+	help
+	  This option allows you to specify Blackfin SDRAM/DDR Timing parameters
+	  The calculated SDRAM timing parameters may not be 100%
+	  accurate - This option is therefore marked experimental.
+
+config BFIN_KERNEL_CLOCK_MEMINIT_CALC
+	bool "Calculate Timings (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+
+config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+	bool "Provide accurate Timings based on target SCLK"
+	help
+	  Please consult the Blackfin Hardware Reference Manuals as well
+	  as the memory device datasheet.
+	  http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
+endchoice
+
+menu "Memory Init Control"
+	depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+
+config MEM_DDRCTL0
+	depends on BF54x
+	hex "DDRCTL0"
+	default 0x0
+
+config MEM_DDRCTL1
+	depends on BF54x
+	hex "DDRCTL1"
+	default 0x0
+
+config MEM_DDRCTL2
+	depends on BF54x
+	hex "DDRCTL2"
+	default 0x0
+
+config MEM_EBIU_DDRQUE
+	depends on BF54x
+	hex "DDRQUE"
+	default 0x0
+
+config MEM_SDRRC
+	depends on !BF54x
+	hex "SDRRC"
+	default 0x0
+
+config MEM_SDGCTL
+	depends on !BF54x
+	hex "SDGCTL"
+	default 0x0
+endmenu
+
 #
 # Max & Min Speeds for various Chips
 #
 config MAX_VCO_HZ
 	int
+	default 400000000 if BF512
+	default 400000000 if BF514
+	default 400000000 if BF516
+	default 400000000 if BF518
 	default 600000000 if BF522
 	default 400000000 if BF523
 	default 400000000 if BF524
@@ -433,6 +572,7 @@ source kernel/Kconfig.hz
 
 config GENERIC_TIME
 	bool "Generic time"
+	depends on !SMP
 	default y
 
 config GENERIC_CLOCKEVENTS
@@ -455,8 +595,6 @@ config CYCLES_CLOCKSOURCE
 
 source kernel/time/Kconfig
 
-comment "Memory Setup"
-
 comment "Misc"
 
 choice
@@ -509,6 +647,7 @@ endmenu
 
 
 menu "Blackfin Kernel Optimizations"
+	depends on !SMP
 
 comment "Memory Optimizations"
 
@@ -622,8 +761,54 @@ config CPLB_SWITCH_TAB_L1
 	  If enabled, the CPLB Switch Tables are linked
 	  into L1 data memory. (less latency)
 
-endmenu
+config APP_STACK_L1
+	bool "Support locating application stack in L1 Scratch Memory"
+	default y
+	help
+	  If enabled the application stack can be located in L1
+	  scratch memory (less latency).
 
+	  Currently only works with FLAT binaries.
+
+config EXCEPTION_L1_SCRATCH
+	bool "Locate exception stack in L1 Scratch Memory"
+	default n
+	depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+	help
+	  Whenever an exception occurs, use the L1 Scratch memory for
+	  stack storage.  You cannot place the stacks of FLAT binaries
+	  in L1 when using this option.
+
+	  If you don't use L1 Scratch, then you should say Y here.
+
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+	bool "ins[bwl] low overhead, higher interrupt latency"
+	default y
+	help
+	  Reads on the Blackfin are speculative. In Blackfin terms, this means
+	  they can be interrupted at any time (even after they have been issued
+	  on to the external bus), and re-issued after the interrupt occurs.
+	  For memory - this is not a big deal, since memory does not change if
+	  it sees a read.
+
+	  If a FIFO is sitting on the end of the read, it will see two reads,
+	  when the core only sees one since the FIFO receives both the read
+	  which is cancelled (and not delivered to the core) and the one which
+	  is re-issued (which is delivered to the core).
+
+	  To solve this, interrupts are turned off before reads occur to
+	  I/O space. This option controls which the overhead/latency of
+	  controlling interrupts during this time
+	   "n" turns interrupts off every read
+		(higher overhead, but lower interrupt latency)
+	   "y" turns interrupts off every loop
+		(low overhead, but longer interrupt latency)
+
+	  default behavior is to leave this set to on (type "Y"). If you are experiencing
+	  interrupt latency issues, it is safe and OK to turn this off.
+
+endmenu
 
 choice
 	prompt "Kernel executes from"
@@ -654,17 +839,9 @@ config BFIN_GPTIMERS
 	  To compile this driver as a module, choose M here: the module
 	  will be called gptimers.ko.
 
-config BFIN_DMA_5XX
-	bool "Enable DMA Support"
-	depends on (BF52x || BF53x || BF561 || BF54x)
-	default y
-	help
-	  DMA driver for BF5xx.
-
 choice
-	prompt "Uncached SDRAM region"
+	prompt "Uncached DMA region"
 	default DMA_UNCACHED_1M
-	depends on BFIN_DMA_5XX
 config DMA_UNCACHED_4M
 	bool "Enable 4M DMA region"
 config DMA_UNCACHED_2M
@@ -691,9 +868,11 @@ config BFIN_ICACHE_LOCK
 choice
 	prompt "Policy"
 	depends on BFIN_DCACHE
-	default BFIN_WB
+	default BFIN_WB if !SMP
+	default BFIN_WT if SMP
 config BFIN_WB
 	bool "Write back"
+	depends on !SMP
 	help
 	  Write Back Policy:
 	    Cached data will be written back to SDRAM only when needed.
@@ -728,6 +907,13 @@ config BFIN_WT
 
 endchoice
 
+config BFIN_L2_CACHEABLE
+	bool "Cache L2 SRAM"
+	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
+	default n
+	help
+	  Select to make L2 SRAM cacheable in L1 data and instruction cache.
+
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n
@@ -828,6 +1014,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 
 config PCI
 	bool "PCI support"
+	depends on BROKEN
 	help
 	  Support for PCI bus.
 
@@ -912,7 +1099,7 @@ config PM_WAKEUP_GPIO_NUMBER
 	int "GPIO number"
 	range 0 47
 	depends on PM_WAKEUP_BY_GPIO
-	default 2 if BFIN537_STAMP
+	default 2
 
 choice
 	prompt "GPIO Polarity"
@@ -935,7 +1122,7 @@ comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
 
 config PM_BFIN_WAKE_PH6
 	bool "Allow Wake-Up from on-chip PHY or PH6 GP"
-	depends on PM && (BF52x || BF534 || BF536 || BF537)
+	depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
 	default n
 	help
 	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
@@ -952,15 +1139,21 @@ menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
 
+config BFIN_CPU_FREQ
+	bool
+	depends on CPU_FREQ
+	select CPU_FREQ_TABLE
+	default y
+
 config CPU_VOLTAGE
 	bool "CPU Voltage scaling"
-	depends on EXPERIMENTAL	
+	depends on EXPERIMENTAL
 	depends on CPU_FREQ
 	default n
 	help
 	  Say Y here if you want CPU voltage scaling according to the CPU frequency.
 	  This option violates the PLL BYPASS recommendation in the Blackfin Processor
-	  manuals. There is a theoretical risk that during VDDINT transitions 
+	  manuals. There is a theoretical risk that during VDDINT transitions
 	  the PLL may unlock.
 
 endmenu