X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Fblackfin%2FKconfig;h=56ee44d7b2d95f5415eaca4bb93aa5b82f5ecf52;hb=172e65e778ad500da26d59965750966e1ac7be51;hp=785d8b4fa0cb9dd453a78db16bb409850afe54d9;hpb=9cd9c616f5890c9345546e03c99ba392b7a82cdf;p=safe%2Fjmp%2Flinux-2.6
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 785d8b4..56ee44d 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -26,6 +26,7 @@ config BLACKFIN
default y
select HAVE_IDE
select HAVE_OPROFILE
+ select ARCH_WANT_OPTIONAL_GPIOLIB
config ZONE_DMA
bool
@@ -59,13 +60,12 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
-config HARDWARE_PM
- def_bool y
- depends on OPROFILE
-
source "init/Kconfig"
+
source "kernel/Kconfig.preempt"
+source "kernel/Kconfig.freezer"
+
menu "Blackfin Processor Options"
comment "Processor and Board Settings"
@@ -74,6 +74,26 @@ choice
prompt "CPU"
default BF533
+config BF512
+ bool "BF512"
+ help
+ BF512 Processor Support.
+
+config BF514
+ bool "BF514"
+ help
+ BF514 Processor Support.
+
+config BF516
+ bool "BF516"
+ help
+ BF516 Processor Support.
+
+config BF518
+ bool "BF518"
+ help
+ BF518 Processor Support.
+
config BF522
bool "BF522"
help
@@ -134,6 +154,16 @@ config BF537
help
BF537 Processor Support.
+config BF538
+ bool "BF538"
+ help
+ BF538 Processor Support.
+
+config BF539
+ bool "BF539"
+ help
+ BF539 Processor Support.
+
config BF542
bool "BF542"
help
@@ -162,20 +192,59 @@ config BF549
config BF561
bool "BF561"
help
- Not Supported Yet - Work in progress - BF561 Processor Support.
+ BF561 Processor Support.
endchoice
+config SMP
+ depends on BF561
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU,
+ like the dual core BF561. If you have a system with only one
+ CPU, say N. If you have a system with more than one CPU, say Y.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int
+ depends on SMP
+ default 2 if BF561
+
+config IRQ_PER_CPU
+ bool
+ depends on SMP
+ default y
+
+config TICK_SOURCE_SYSTMR0
+ bool
+ select BFIN_GPTIMERS
+ depends on SMP
+ default y
+
+config BF_REV_MIN
+ int
+ default 0 if (BF51x || BF52x || BF54x)
+ default 2 if (BF537 || BF536 || BF534)
+ default 3 if (BF561 ||BF533 || BF532 || BF531)
+ default 4 if (BF538 || BF539)
+
+config BF_REV_MAX
+ int
+ default 2 if (BF51x || BF52x || BF54x)
+ default 3 if (BF537 || BF536 || BF534)
+ default 5 if (BF561 || BF538 || BF539)
+ default 6 if (BF533 || BF532 || BF531)
+
choice
prompt "Silicon Rev"
- default BF_REV_0_1 if BF527
- default BF_REV_0_2 if BF537
- default BF_REV_0_3 if BF533
- default BF_REV_0_0 if BF549
+ default BF_REV_0_1 if (BF51x || BF52x || BF54x)
+ default BF_REV_0_2 if (BF534 || BF536 || BF537)
+ default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
config BF_REV_0_0
bool "0.0"
- depends on (BF52x || BF54x)
+ depends on (BF51x || BF52x || BF54x)
config BF_REV_0_1
bool "0.1"
@@ -183,7 +252,7 @@ config BF_REV_0_1
config BF_REV_0_2
bool "0.2"
- depends on (BF537 || BF536 || BF534)
+ depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
config BF_REV_0_3
bool "0.3"
@@ -191,11 +260,15 @@ config BF_REV_0_3
config BF_REV_0_4
bool "0.4"
- depends on (BF561 || BF533 || BF532 || BF531)
+ depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
config BF_REV_0_5
bool "0.5"
- depends on (BF561 || BF533 || BF532 || BF531)
+ depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
+
+config BF_REV_0_6
+ bool "0.6"
+ depends on (BF533 || BF532 || BF531)
config BF_REV_ANY
bool "any"
@@ -205,6 +278,11 @@ config BF_REV_NONE
endchoice
+config BF51x
+ bool
+ depends on (BF512 || BF514 || BF516 || BF518)
+ default y
+
config BF52x
bool
depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
@@ -234,12 +312,12 @@ config MEM_MT48LC16M16A2TG_75
bool
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
- || H8606_HVSISTEMAS)
+ || H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
default y
config MEM_MT48LC32M8A2_75
bool
- depends on (BFIN537_STAMP || PNAV10)
+ depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
default y
config MEM_MT48LC8M32B2B5_7
@@ -249,13 +327,15 @@ config MEM_MT48LC8M32B2B5_7
config MEM_MT48LC32M16A2TG_75
bool
- depends on (BFIN527_EZKIT || BFIN532_IP0X)
+ depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
default y
+source "arch/blackfin/mach-bf518/Kconfig"
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
source "arch/blackfin/mach-bf561/Kconfig"
source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf538/Kconfig"
source "arch/blackfin/mach-bf548/Kconfig"
menu "Board customizations"
@@ -286,13 +366,21 @@ config BOOT_LOAD
memory region is used to capture NULL pointer references as well
as some core kernel functions.
+config ROM_BASE
+ hex "Kernel ROM Base"
+ depends on ROMKERNEL
+ default "0x20040000"
+ range 0x20000000 0x20400000 if !(BF54x || BF561)
+ range 0x20000000 0x30000000 if (BF54x || BF561)
+ help
+
comment "Clock/PLL Setup"
config CLKIN_HZ
int "Frequency of the crystal on the board in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
+ default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
default "10000000" if BFIN532_IP0X
@@ -310,25 +398,6 @@ config BFIN_KERNEL_CLOCK
are also not changed, and the Bootloader does 100% of the hardware
configuration.
-config MEM_SIZE
- int "SDRAM Memory Size in MBytes"
- depends on BFIN_KERNEL_CLOCK
- default 64
-
-config MEM_ADD_WIDTH
- int "Memory Address Width"
- depends on BFIN_KERNEL_CLOCK
- depends on (!BF54x)
- range 8 11
- default 9 if BFIN533_EZKIT
- default 9 if BFIN561_EZKIT
- default 9 if H8606_HVSISTEMAS
- default 10 if BFIN527_EZKIT
- default 10 if BFIN537_STAMP
- default 11 if BFIN533_STAMP
- default 10 if PNAV10
- default 10 if BFIN532_IP0X
-
config PLL_BYPASS
bool "Bypass PLL"
depends on BFIN_KERNEL_CLOCK
@@ -347,12 +416,11 @@ config VCO_MULT
range 1 64
default "22" if BFIN533_EZKIT
default "45" if BFIN533_STAMP
- default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
+ default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
default "22" if BFIN533_BLUETECHNIX_CM
- default "20" if BFIN537_BLUETECHNIX_CM
- default "20" if BFIN561_BLUETECHNIX_CM
+ default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
default "20" if BFIN561_EZKIT
- default "16" if H8606_HVSISTEMAS
+ default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
@@ -388,14 +456,6 @@ config SCLK_DIV
This can be between 1 and 15
System Clock = (PLL frequency) / (this setting)
-config MAX_MEM_SIZE
- int "Max SDRAM Memory Size in MBytes"
- depends on !BFIN_KERNEL_CLOCK && !MPU
- default 512
- help
- This is the max memory size that the kernel will create CPLB
- tables for. Your system will not be able to handle any more.
-
choice
prompt "DDR SDRAM Chip Type"
depends on BFIN_KERNEL_CLOCK
@@ -409,11 +469,70 @@ config MEM_MT46V32M16_5B
bool "MT46V32M16_5B"
endchoice
+choice
+ prompt "DDR/SDRAM Timing"
+ depends on BFIN_KERNEL_CLOCK
+ default BFIN_KERNEL_CLOCK_MEMINIT_CALC
+ help
+ This option allows you to specify Blackfin SDRAM/DDR Timing parameters
+ The calculated SDRAM timing parameters may not be 100%
+ accurate - This option is therefore marked experimental.
+
+config BFIN_KERNEL_CLOCK_MEMINIT_CALC
+ bool "Calculate Timings (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+
+config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+ bool "Provide accurate Timings based on target SCLK"
+ help
+ Please consult the Blackfin Hardware Reference Manuals as well
+ as the memory device datasheet.
+ http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
+endchoice
+
+menu "Memory Init Control"
+ depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+
+config MEM_DDRCTL0
+ depends on BF54x
+ hex "DDRCTL0"
+ default 0x0
+
+config MEM_DDRCTL1
+ depends on BF54x
+ hex "DDRCTL1"
+ default 0x0
+
+config MEM_DDRCTL2
+ depends on BF54x
+ hex "DDRCTL2"
+ default 0x0
+
+config MEM_EBIU_DDRQUE
+ depends on BF54x
+ hex "DDRQUE"
+ default 0x0
+
+config MEM_SDRRC
+ depends on !BF54x
+ hex "SDRRC"
+ default 0x0
+
+config MEM_SDGCTL
+ depends on !BF54x
+ hex "SDGCTL"
+ default 0x0
+endmenu
+
#
# Max & Min Speeds for various Chips
#
config MAX_VCO_HZ
int
+ default 400000000 if BF512
+ default 400000000 if BF514
+ default 400000000 if BF516
+ default 400000000 if BF518
default 600000000 if BF522
default 400000000 if BF523
default 400000000 if BF524
@@ -453,6 +572,7 @@ source kernel/Kconfig.hz
config GENERIC_TIME
bool "Generic time"
+ depends on !SMP
default y
config GENERIC_CLOCKEVENTS
@@ -475,8 +595,6 @@ config CYCLES_CLOCKSOURCE
source kernel/time/Kconfig
-comment "Memory Setup"
-
comment "Misc"
choice
@@ -529,6 +647,7 @@ endmenu
menu "Blackfin Kernel Optimizations"
+ depends on !SMP
comment "Memory Optimizations"
@@ -642,8 +761,54 @@ config CPLB_SWITCH_TAB_L1
If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency)
-endmenu
+config APP_STACK_L1
+ bool "Support locating application stack in L1 Scratch Memory"
+ default y
+ help
+ If enabled the application stack can be located in L1
+ scratch memory (less latency).
+
+ Currently only works with FLAT binaries.
+
+config EXCEPTION_L1_SCRATCH
+ bool "Locate exception stack in L1 Scratch Memory"
+ default n
+ depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+ help
+ Whenever an exception occurs, use the L1 Scratch memory for
+ stack storage. You cannot place the stacks of FLAT binaries
+ in L1 when using this option.
+ If you don't use L1 Scratch, then you should say Y here.
+
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+ bool "ins[bwl] low overhead, higher interrupt latency"
+ default y
+ help
+ Reads on the Blackfin are speculative. In Blackfin terms, this means
+ they can be interrupted at any time (even after they have been issued
+ on to the external bus), and re-issued after the interrupt occurs.
+ For memory - this is not a big deal, since memory does not change if
+ it sees a read.
+
+ If a FIFO is sitting on the end of the read, it will see two reads,
+ when the core only sees one since the FIFO receives both the read
+ which is cancelled (and not delivered to the core) and the one which
+ is re-issued (which is delivered to the core).
+
+ To solve this, interrupts are turned off before reads occur to
+ I/O space. This option controls which the overhead/latency of
+ controlling interrupts during this time
+ "n" turns interrupts off every read
+ (higher overhead, but lower interrupt latency)
+ "y" turns interrupts off every loop
+ (low overhead, but longer interrupt latency)
+
+ default behavior is to leave this set to on (type "Y"). If you are experiencing
+ interrupt latency issues, it is safe and OK to turn this off.
+
+endmenu
choice
prompt "Kernel executes from"
@@ -674,17 +839,11 @@ config BFIN_GPTIMERS
To compile this driver as a module, choose M here: the module
will be called gptimers.ko.
-config BFIN_DMA_5XX
- bool "Enable DMA Support"
- depends on (BF52x || BF53x || BF561 || BF54x)
- default y
- help
- DMA driver for BF5xx.
-
choice
- prompt "Uncached SDRAM region"
+ prompt "Uncached DMA region"
default DMA_UNCACHED_1M
- depends on BFIN_DMA_5XX
+config DMA_UNCACHED_4M
+ bool "Enable 4M DMA region"
config DMA_UNCACHED_2M
bool "Enable 2M DMA region"
config DMA_UNCACHED_1M
@@ -709,9 +868,11 @@ config BFIN_ICACHE_LOCK
choice
prompt "Policy"
depends on BFIN_DCACHE
- default BFIN_WB
+ default BFIN_WB if !SMP
+ default BFIN_WT if SMP
config BFIN_WB
bool "Write back"
+ depends on !SMP
help
Write Back Policy:
Cached data will be written back to SDRAM only when needed.
@@ -746,13 +907,12 @@ config BFIN_WT
endchoice
-config L1_MAX_PIECE
- int "Set the max L1 SRAM pieces"
- default 16
+config BFIN_L2_CACHEABLE
+ bool "Cache L2 SRAM"
+ depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
+ default n
help
- Set the max memory pieces for the L1 SRAM allocation algorithm.
- Min value is 16. Max value is 1024.
-
+ Select to make L2 SRAM cacheable in L1 data and instruction cache.
config MPU
bool "Enable the memory protection unit (EXPERIMENTAL)"
@@ -854,6 +1014,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
config PCI
bool "PCI support"
+ depends on BROKEN
help
Support for PCI bus.
@@ -871,8 +1032,8 @@ config HOTPLUG
plugged into slots found on all modern laptop computers. Another
example, used on modern desktops as well as laptops, is USB.
- Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
- software (at ) and install it.
+ Enable HOTPLUG and build a modular kernel. Get agent software
+ (from ) and install it.
Then your kernel will automatically call out to a user mode "policy
agent" (/sbin/hotplug) to load modules and set up software needed
to use devices as you hotplug them.
@@ -897,7 +1058,7 @@ config ARCH_SUSPEND_POSSIBLE
depends on !SMP
choice
- prompt "Default Power Saving Mode"
+ prompt "Standby Power Saving Mode"
depends on PM
default PM_BFIN_SLEEP_DEEPER
config PM_BFIN_SLEEP_DEEPER
@@ -916,6 +1077,8 @@ config PM_BFIN_SLEEP_DEEPER
normal during Sleep Deeper, due to the reduced SCLK frequency.
When in the sleep mode, system DMA access to L1 memory is not supported.
+ If unsure, select "Sleep Deeper".
+
config PM_BFIN_SLEEP
bool "Sleep"
help
@@ -923,18 +1086,20 @@ config PM_BFIN_SLEEP
dissipation by disabling the clock to the processor core (CCLK).
The PLL and system clock (SCLK), however, continue to operate in
this mode. Typically an external event or RTC activity will wake
- up the processor. When in the sleep mode,
- system DMA access to L1 memory is not supported.
+ up the processor. When in the sleep mode, system DMA access to L1
+ memory is not supported.
+
+ If unsure, select "Sleep Deeper".
endchoice
config PM_WAKEUP_BY_GPIO
- bool "Cause Wakeup Event by GPIO"
+ bool "Allow Wakeup from Standby by GPIO"
config PM_WAKEUP_GPIO_NUMBER
- int "Wakeup GPIO number"
+ int "GPIO number"
range 0 47
depends on PM_WAKEUP_BY_GPIO
- default 2 if BFIN537_STAMP
+ default 2
choice
prompt "GPIO Polarity"
@@ -952,21 +1117,43 @@ config PM_WAKEUP_GPIO_POLAR_EDGE_B
bool "Both EDGE"
endchoice
+comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
+ depends on PM
+
+config PM_BFIN_WAKE_PH6
+ bool "Allow Wake-Up from on-chip PHY or PH6 GP"
+ depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
+ default n
+ help
+ Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_GP
+ bool "Allow Wake-Up from GPIOs"
+ depends on PM && BF54x
+ default n
+ help
+ Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
endmenu
menu "CPU Frequency scaling"
source "drivers/cpufreq/Kconfig"
+config BFIN_CPU_FREQ
+ bool
+ depends on CPU_FREQ
+ select CPU_FREQ_TABLE
+ default y
+
config CPU_VOLTAGE
bool "CPU Voltage scaling"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL
depends on CPU_FREQ
default n
help
Say Y here if you want CPU voltage scaling according to the CPU frequency.
This option violates the PLL BYPASS recommendation in the Blackfin Processor
- manuals. There is a theoretical risk that during VDDINT transitions
+ manuals. There is a theoretical risk that during VDDINT transitions
the PLL may unlock.
endmenu