X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=arch%2Farm%2FMakefile;h=24e0f0187697009fb19de797f8e7f76042b94e9e;hb=828c707e6dbd0ca7882f721a466ff28729376ff0;hp=9ea97d08a5056e6e841df3ff7abba8dba00fa1f1;hpb=c1a9e91e426a78728c0e815b0355a7c0374d1088;p=safe%2Fjmp%2Flinux-2.6 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 9ea97d0..24e0f01 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -47,7 +47,7 @@ comma = , # Note that GCC does not numerically define an architecture version # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. -arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a) +arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) # Only override the compiler option if ARMv6. The ARMv6K extensions are # always available in ARMv7 @@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi -tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) +tune-$(CONFIG_CPU_ARM946E) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi @@ -76,6 +76,7 @@ tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale +tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale) tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) ifeq ($(CONFIG_AEABI),y) @@ -96,12 +97,7 @@ textofs-y := 0x00008000 machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_EBSA110) := ebsa110 - machine-$(CONFIG_ARCH_CLPS7500) := clps7500 - incdir-$(CONFIG_ARCH_CLPS7500) := cl7500 machine-$(CONFIG_FOOTBRIDGE) := footbridge - incdir-$(CONFIG_FOOTBRIDGE) := ebsa285 - machine-$(CONFIG_ARCH_CO285) := footbridge - incdir-$(CONFIG_ARCH_CO285) := ebsa285 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SA1100) := sa1100 ifeq ($(CONFIG_ARCH_SA1100),y) @@ -116,13 +112,19 @@ endif machine-$(CONFIG_ARCH_IOP32X) := iop32x machine-$(CONFIG_ARCH_IOP33X) := iop33x machine-$(CONFIG_ARCH_IOP13XX) := iop13xx + plat-$(CONFIG_PLAT_IOP) := iop machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 - incdir-$(CONFIG_ARCH_OMAP) := omap - machine-$(CONFIG_ARCH_S3C2410) := s3c2410 + machine-$(CONFIG_ARCH_OMAP3) := omap2 + plat-$(CONFIG_ARCH_OMAP) := omap + machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 + machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 + plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c + machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 + plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx @@ -135,11 +137,18 @@ endif machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx machine-$(CONFIG_ARCH_DAVINCI) := davinci + machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 - incdir-$(CONFIG_ARCH_MXC) := mxc + plat-$(CONFIG_ARCH_MXC) := mxc + machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX3) := mx3 - machine-$(CONFIG_ARCH_ORION) := orion - machine-$(CONFIG_ARCH_MSM7X00A) := msm + machine-$(CONFIG_ARCH_MX1) := mx1 + machine-$(CONFIG_ARCH_ORION5X) := orion5x + plat-$(CONFIG_PLAT_ORION) := orion + machine-$(CONFIG_ARCH_MSM) := msm + machine-$(CONFIG_ARCH_LOKI) := loki + machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 + machine-$(CONFIG_ARCH_W90X900) := w90x900 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. @@ -151,17 +160,22 @@ endif # The byte offset of the kernel image in RAM from the start of RAM. TEXT_OFFSET := $(textofs-y) -ifeq ($(incdir-y),) -incdir-y := $(machine-y) -endif -INCDIR := arch-$(incdir-y) - +# The first directory contains additional information for the boot setup code ifneq ($(machine-y),) -MACHINE := arch/arm/mach-$(machine-y)/ +MACHINE := arch/arm/mach-$(word 1,$(machine-y))/ else MACHINE := endif +machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) +platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y)) + +ifeq ($(KBUILD_SRC),) +KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs)) +else +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs)) +endif + export TEXT_OFFSET GZFLAGS MMUEXT # Do we have FASTFPE? @@ -172,25 +186,12 @@ endif # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ -core-y += $(MACHINE) -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2400/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2412/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2440/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2442/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2443/ +core-y += $(machdirs) $(platdirs) core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ -# If we have a common platform directory, then include it in the build. -core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ -core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ -core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/ -core-$(CONFIG_ARCH_MXC) += arch/arm/plat-mxc/ - drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ -drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ -drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/ libs-y := arch/arm/lib/ $(libs-y) @@ -209,20 +210,10 @@ boot := arch/arm/boot # them changed. We use .arch to indicate when they were updated # last, otherwise make uses the target directory mtime. -include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-arm - $(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch -else - $(Q)ln -fsn $(INCDIR) include/asm-arm/arch -endif - @touch $@ - archprepare: maketools PHONY += maketools FORCE -maketools: include/linux/version.h include/asm-arm/.arch FORCE +maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h # Convert bzImage to zImage