X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;ds=sidebyside;f=include%2Flinux%2Fi2o.h;h=4c4e57d1f19d74c245c7e70e09c5e9428f838089;hb=9c536d275823b8a6281894f4f8c2687f60578253;hp=e8cd1129001034904f43dbca8bbd943d5779d9a1;hpb=f88e119c4b824a5017456fa094950d0f4092d96c;p=safe%2Fjmp%2Flinux-2.6 diff --git a/include/linux/i2o.h b/include/linux/i2o.h index e8cd112..4c4e57d 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -18,167 +18,547 @@ #ifndef _I2O_H #define _I2O_H -#ifdef __KERNEL__ /* This file to be included by kernel only */ - #include /* How many different OSM's are we allowing */ #define I2O_MAX_DRIVERS 8 -#include -#include /* Needed for MUTEX init macros */ #include #include +#include +#include +#include /* work_struct */ +#include +#include +#include +#include /* Needed for MUTEX init macros */ + +#include /* message queue empty */ #define I2O_QUEUE_EMPTY 0xffffffff /* - * Message structures + * Cache strategies */ -struct i2o_message { - union { - struct { - u8 version_offset; - u8 flags; - u16 size; - u32 target_tid:12; - u32 init_tid:12; - u32 function:8; - u32 icntxt; /* initiator context */ - u32 tcntxt; /* transaction context */ - } s; - u32 head[4]; - } u; - /* List follows */ - u32 body[0]; -}; -/* - * Each I2O device entity has one of these. There is one per device. +/* The NULL strategy leaves everything up to the controller. This tends to be a + * pessimal but functional choice. */ -struct i2o_device { - i2o_lct_entry lct_data; /* Device LCT information */ - - struct i2o_controller *iop; /* Controlling IOP */ - struct list_head list; /* node in IOP devices list */ - - struct device device; +#define CACHE_NULL 0 +/* Prefetch data when reading. We continually attempt to load the next 32 sectors + * into the controller cache. + */ +#define CACHE_PREFETCH 1 +/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors + * into the controller cache. When an I/O is less <= 8K we assume its probably + * not sequential and don't prefetch (default) + */ +#define CACHE_SMARTFETCH 2 +/* Data is written to the cache and then out on to the disk. The I/O must be + * physically on the medium before the write is acknowledged (default without + * NVRAM) + */ +#define CACHE_WRITETHROUGH 17 +/* Data is written to the cache and then out on to the disk. The controller + * is permitted to write back the cache any way it wants. (default if battery + * backed NVRAM is present). It can be useful to set this for swap regardless of + * battery state. + */ +#define CACHE_WRITEBACK 18 +/* Optimise for under powered controllers, especially on RAID1 and RAID0. We + * write large I/O's directly to disk bypassing the cache to avoid the extra + * memory copy hits. Small writes are writeback cached + */ +#define CACHE_SMARTBACK 19 +/* Optimise for under powered controllers, especially on RAID1 and RAID0. We + * write large I/O's directly to disk bypassing the cache to avoid the extra + * memory copy hits. Small writes are writethrough cached. Suitable for devices + * lacking battery backup + */ +#define CACHE_SMARTTHROUGH 20 - struct semaphore lock; /* device lock */ +/* + * Ioctl structures + */ - struct class_device classdev; /* i2o device class */ -}; +#define BLKI2OGRSTRAT _IOR('2', 1, int) +#define BLKI2OGWSTRAT _IOR('2', 2, int) +#define BLKI2OSRSTRAT _IOW('2', 3, int) +#define BLKI2OSWSTRAT _IOW('2', 4, int) /* - * Event structure provided to the event handling function + * I2O Function codes */ -struct i2o_event { - struct work_struct work; - struct i2o_device *i2o_dev; /* I2O device pointer from which the - event reply was initiated */ - u16 size; /* Size of data in 32-bit words */ - u32 tcntxt; /* Transaction context used at - registration */ - u32 event_indicator; /* Event indicator from reply */ - u32 data[0]; /* Event data from reply */ -}; /* - * I2O classes which could be handled by the OSM + * Executive Class */ -struct i2o_class_id { - u16 class_id:12; -}; +#define I2O_CMD_ADAPTER_ASSIGN 0xB3 +#define I2O_CMD_ADAPTER_READ 0xB2 +#define I2O_CMD_ADAPTER_RELEASE 0xB5 +#define I2O_CMD_BIOS_INFO_SET 0xA5 +#define I2O_CMD_BOOT_DEVICE_SET 0xA7 +#define I2O_CMD_CONFIG_VALIDATE 0xBB +#define I2O_CMD_CONN_SETUP 0xCA +#define I2O_CMD_DDM_DESTROY 0xB1 +#define I2O_CMD_DDM_ENABLE 0xD5 +#define I2O_CMD_DDM_QUIESCE 0xC7 +#define I2O_CMD_DDM_RESET 0xD9 +#define I2O_CMD_DDM_SUSPEND 0xAF +#define I2O_CMD_DEVICE_ASSIGN 0xB7 +#define I2O_CMD_DEVICE_RELEASE 0xB9 +#define I2O_CMD_HRT_GET 0xA8 +#define I2O_CMD_ADAPTER_CLEAR 0xBE +#define I2O_CMD_ADAPTER_CONNECT 0xC9 +#define I2O_CMD_ADAPTER_RESET 0xBD +#define I2O_CMD_LCT_NOTIFY 0xA2 +#define I2O_CMD_OUTBOUND_INIT 0xA1 +#define I2O_CMD_PATH_ENABLE 0xD3 +#define I2O_CMD_PATH_QUIESCE 0xC5 +#define I2O_CMD_PATH_RESET 0xD7 +#define I2O_CMD_STATIC_MF_CREATE 0xDD +#define I2O_CMD_STATIC_MF_RELEASE 0xDF +#define I2O_CMD_STATUS_GET 0xA0 +#define I2O_CMD_SW_DOWNLOAD 0xA9 +#define I2O_CMD_SW_UPLOAD 0xAB +#define I2O_CMD_SW_REMOVE 0xAD +#define I2O_CMD_SYS_ENABLE 0xD1 +#define I2O_CMD_SYS_MODIFY 0xC1 +#define I2O_CMD_SYS_QUIESCE 0xC3 +#define I2O_CMD_SYS_TAB_SET 0xA3 /* - * I2O driver structure for OSMs + * Utility Class */ -struct i2o_driver { - char *name; /* OSM name */ - int context; /* Low 8 bits of the transaction info */ - struct i2o_class_id *classes; /* I2O classes that this OSM handles */ - - /* Message reply handler */ - int (*reply) (struct i2o_controller *, u32, struct i2o_message *); - - /* Event handler */ - void (*event) (struct i2o_event *); - - struct workqueue_struct *event_queue; /* Event queue */ - - struct device_driver driver; - - /* notification of changes */ - void (*notify_controller_add) (struct i2o_controller *); - void (*notify_controller_remove) (struct i2o_controller *); - void (*notify_device_add) (struct i2o_device *); - void (*notify_device_remove) (struct i2o_device *); - - struct semaphore lock; -}; +#define I2O_CMD_UTIL_NOP 0x00 +#define I2O_CMD_UTIL_ABORT 0x01 +#define I2O_CMD_UTIL_CLAIM 0x09 +#define I2O_CMD_UTIL_RELEASE 0x0B +#define I2O_CMD_UTIL_PARAMS_GET 0x06 +#define I2O_CMD_UTIL_PARAMS_SET 0x05 +#define I2O_CMD_UTIL_EVT_REGISTER 0x13 +#define I2O_CMD_UTIL_EVT_ACK 0x14 +#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10 +#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D +#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F +#define I2O_CMD_UTIL_LOCK 0x17 +#define I2O_CMD_UTIL_LOCK_RELEASE 0x19 +#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15 /* - * Contains all information which are necessary for DMA operations + * SCSI Host Bus Adapter Class */ -struct i2o_dma { - void *virt; - dma_addr_t phys; - u32 len; -}; +#define I2O_CMD_SCSI_EXEC 0x81 +#define I2O_CMD_SCSI_ABORT 0x83 +#define I2O_CMD_SCSI_BUSRESET 0x27 /* - * Context queue entry, used for 32-bit context on 64-bit systems + * Bus Adapter Class */ -struct i2o_context_list_element { - struct list_head list; - u32 context; - void *ptr; - unsigned long timestamp; -}; +#define I2O_CMD_BUS_ADAPTER_RESET 0x85 +#define I2O_CMD_BUS_RESET 0x87 +#define I2O_CMD_BUS_SCAN 0x89 +#define I2O_CMD_BUS_QUIESCE 0x8b /* - * Each I2O controller has one of these objects + * Random Block Storage Class */ -struct i2o_controller { - char name[16]; - int unit; - int type; +#define I2O_CMD_BLOCK_READ 0x30 +#define I2O_CMD_BLOCK_WRITE 0x31 +#define I2O_CMD_BLOCK_CFLUSH 0x37 +#define I2O_CMD_BLOCK_MLOCK 0x49 +#define I2O_CMD_BLOCK_MUNLOCK 0x4B +#define I2O_CMD_BLOCK_MMOUNT 0x41 +#define I2O_CMD_BLOCK_MEJECT 0x43 +#define I2O_CMD_BLOCK_POWER 0x70 - struct pci_dev *pdev; /* PCI device */ +#define I2O_CMD_PRIVATE 0xFF - unsigned int short_req:1; /* use small block sizes */ - unsigned int no_quiesce:1; /* dont quiesce before reset */ - unsigned int raptor:1; /* split bar */ - unsigned int promise:1; /* Promise controller */ +/* Command status values */ - struct list_head devices; /* list of I2O devices */ - struct list_head list; /* Controller list */ +#define I2O_CMD_IN_PROGRESS 0x01 +#define I2O_CMD_REJECTED 0x02 +#define I2O_CMD_FAILED 0x03 +#define I2O_CMD_COMPLETED 0x04 - void __iomem *in_port; /* Inbout port address */ - void __iomem *out_port; /* Outbound port address */ - void __iomem *irq_mask; /* Interrupt register address */ +/* I2O API function return values */ - /* Dynamic LCT related data */ +#define I2O_RTN_NO_ERROR 0 +#define I2O_RTN_NOT_INIT 1 +#define I2O_RTN_FREE_Q_EMPTY 2 +#define I2O_RTN_TCB_ERROR 3 +#define I2O_RTN_TRANSACTION_ERROR 4 +#define I2O_RTN_ADAPTER_ALREADY_INIT 5 +#define I2O_RTN_MALLOC_ERROR 6 +#define I2O_RTN_ADPTR_NOT_REGISTERED 7 +#define I2O_RTN_MSG_REPLY_TIMEOUT 8 +#define I2O_RTN_NO_STATUS 9 +#define I2O_RTN_NO_FIRM_VER 10 +#define I2O_RTN_NO_LINK_SPEED 11 - struct i2o_dma status; /* status of IOP */ +/* Reply message status defines for all messages */ - struct i2o_dma hrt; /* HW Resource Table */ - i2o_lct *lct; /* Logical Config Table */ - struct i2o_dma dlct; /* Temp LCT */ - struct semaphore lct_lock; /* Lock for LCT updates */ - struct i2o_dma status_block; /* IOP status block */ +#define I2O_REPLY_STATUS_SUCCESS 0x00 +#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01 +#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02 +#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03 +#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04 +#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05 +#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06 +#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08 +#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09 +#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A +#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B +#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80 - struct i2o_dma base; /* controller messaging unit */ - struct i2o_dma in_queue; /* inbound message queue Host->IOP */ - struct i2o_dma out_queue; /* outbound message queue IOP->Host */ +/* Status codes and Error Information for Parameter functions */ - unsigned int battery:1; /* Has a battery backup */ - unsigned int io_alloc:1; /* An I/O resource was allocated */ - unsigned int mem_alloc:1; /* A memory resource was allocated */ +#define I2O_PARAMS_STATUS_SUCCESS 0x00 +#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01 +#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02 +#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03 +#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04 +#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05 +#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06 +#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07 +#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08 +#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09 +#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A +#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B +#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C +#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D +#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E +#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F +#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10 - struct resource io_resource; /* I/O resource allocated to the IOP */ - struct resource mem_resource; /* Mem resource allocated to the IOP */ +/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error + * messages: Table 3-2 Detailed Status Codes.*/ + +#define I2O_DSC_SUCCESS 0x0000 +#define I2O_DSC_BAD_KEY 0x0002 +#define I2O_DSC_TCL_ERROR 0x0003 +#define I2O_DSC_REPLY_BUFFER_FULL 0x0004 +#define I2O_DSC_NO_SUCH_PAGE 0x0005 +#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006 +#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007 +#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009 +#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A +#define I2O_DSC_DEVICE_LOCKED 0x000B +#define I2O_DSC_DEVICE_RESET 0x000C +#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D +#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E +#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F +#define I2O_DSC_INVALID_OFFSET 0x0010 +#define I2O_DSC_INVALID_PARAMETER 0x0011 +#define I2O_DSC_INVALID_REQUEST 0x0012 +#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013 +#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014 +#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015 +#define I2O_DSC_MISSING_PARAMETER 0x0016 +#define I2O_DSC_TIMEOUT 0x0017 +#define I2O_DSC_UNKNOWN_ERROR 0x0018 +#define I2O_DSC_UNKNOWN_FUNCTION 0x0019 +#define I2O_DSC_UNSUPPORTED_VERSION 0x001A +#define I2O_DSC_DEVICE_BUSY 0x001B +#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C + +/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed + Status Codes.*/ + +#define I2O_BSA_DSC_SUCCESS 0x0000 +#define I2O_BSA_DSC_MEDIA_ERROR 0x0001 +#define I2O_BSA_DSC_ACCESS_ERROR 0x0002 +#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003 +#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004 +#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005 +#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006 +#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007 +#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008 +#define I2O_BSA_DSC_BUS_FAILURE 0x0009 +#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A +#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B +#define I2O_BSA_DSC_DEVICE_RESET 0x000C +#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D +#define I2O_BSA_DSC_TIMEOUT 0x000E + +/* FailureStatusCodes, Table 3-3 Message Failure Codes */ + +#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81 +#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82 +#define I2O_FSC_TRANSPORT_CONGESTION 0x83 +#define I2O_FSC_TRANSPORT_FAILURE 0x84 +#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85 +#define I2O_FSC_TRANSPORT_TIME_OUT 0x86 +#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87 +#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88 +#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89 +#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A +#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B +#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C +#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D +#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E +#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F +#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF + +/* Device Claim Types */ +#define I2O_CLAIM_PRIMARY 0x01000000 +#define I2O_CLAIM_MANAGEMENT 0x02000000 +#define I2O_CLAIM_AUTHORIZED 0x03000000 +#define I2O_CLAIM_SECONDARY 0x04000000 + +/* Message header defines for VersionOffset */ +#define I2OVER15 0x0001 +#define I2OVER20 0x0002 + +/* Default is 1.5 */ +#define I2OVERSION I2OVER15 + +#define SGL_OFFSET_0 I2OVERSION +#define SGL_OFFSET_4 (0x0040 | I2OVERSION) +#define SGL_OFFSET_5 (0x0050 | I2OVERSION) +#define SGL_OFFSET_6 (0x0060 | I2OVERSION) +#define SGL_OFFSET_7 (0x0070 | I2OVERSION) +#define SGL_OFFSET_8 (0x0080 | I2OVERSION) +#define SGL_OFFSET_9 (0x0090 | I2OVERSION) +#define SGL_OFFSET_10 (0x00A0 | I2OVERSION) +#define SGL_OFFSET_11 (0x00B0 | I2OVERSION) +#define SGL_OFFSET_12 (0x00C0 | I2OVERSION) +#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION) + +/* Transaction Reply Lists (TRL) Control Word structure */ +#define TRL_SINGLE_FIXED_LENGTH 0x00 +#define TRL_SINGLE_VARIABLE_LENGTH 0x40 +#define TRL_MULTIPLE_FIXED_LENGTH 0x80 + + /* msg header defines for MsgFlags */ +#define MSG_STATIC 0x0100 +#define MSG_64BIT_CNTXT 0x0200 +#define MSG_MULTI_TRANS 0x1000 +#define MSG_FAIL 0x2000 +#define MSG_FINAL 0x4000 +#define MSG_REPLY 0x8000 + + /* minimum size msg */ +#define THREE_WORD_MSG_SIZE 0x00030000 +#define FOUR_WORD_MSG_SIZE 0x00040000 +#define FIVE_WORD_MSG_SIZE 0x00050000 +#define SIX_WORD_MSG_SIZE 0x00060000 +#define SEVEN_WORD_MSG_SIZE 0x00070000 +#define EIGHT_WORD_MSG_SIZE 0x00080000 +#define NINE_WORD_MSG_SIZE 0x00090000 +#define TEN_WORD_MSG_SIZE 0x000A0000 +#define ELEVEN_WORD_MSG_SIZE 0x000B0000 +#define I2O_MESSAGE_SIZE(x) ((x)<<16) + +/* special TID assignments */ +#define ADAPTER_TID 0 +#define HOST_TID 1 + +/* outbound queue defines */ +#define I2O_MAX_OUTBOUND_MSG_FRAMES 128 +#define I2O_OUTBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */ + +/* inbound queue definitions */ +#define I2O_MSG_INPOOL_MIN 32 +#define I2O_INBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */ + +#define I2O_POST_WAIT_OK 0 +#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT + +#define I2O_CONTEXT_LIST_MIN_LENGTH 15 +#define I2O_CONTEXT_LIST_USED 0x01 +#define I2O_CONTEXT_LIST_DELETED 0x02 + +/* timeouts */ +#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15 +#define I2O_TIMEOUT_MESSAGE_GET 5 +#define I2O_TIMEOUT_RESET 30 +#define I2O_TIMEOUT_STATUS_GET 5 +#define I2O_TIMEOUT_LCT_GET 360 +#define I2O_TIMEOUT_SCSI_SCB_ABORT 240 + +/* retries */ +#define I2O_HRT_GET_TRIES 3 +#define I2O_LCT_GET_TRIES 3 + +/* defines for max_sectors and max_phys_segments */ +#define I2O_MAX_SECTORS 1024 +#define I2O_MAX_SECTORS_LIMITED 128 +#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS + +/* + * Message structures + */ +struct i2o_message { + union { + struct { + u8 version_offset; + u8 flags; + u16 size; + u32 target_tid:12; + u32 init_tid:12; + u32 function:8; + u32 icntxt; /* initiator context */ + u32 tcntxt; /* transaction context */ + } s; + u32 head[4]; + } u; + /* List follows */ + u32 body[0]; +}; + +/* MFA and I2O message used by mempool */ +struct i2o_msg_mfa { + u32 mfa; /* MFA returned by the controller */ + struct i2o_message msg; /* I2O message */ +}; + +/* + * Each I2O device entity has one of these. There is one per device. + */ +struct i2o_device { + i2o_lct_entry lct_data; /* Device LCT information */ + + struct i2o_controller *iop; /* Controlling IOP */ + struct list_head list; /* node in IOP devices list */ + + struct device device; + + struct mutex lock; /* device lock */ +}; + +/* + * Event structure provided to the event handling function + */ +struct i2o_event { + struct work_struct work; + struct i2o_device *i2o_dev; /* I2O device pointer from which the + event reply was initiated */ + u16 size; /* Size of data in 32-bit words */ + u32 tcntxt; /* Transaction context used at + registration */ + u32 event_indicator; /* Event indicator from reply */ + u32 data[0]; /* Event data from reply */ +}; + +/* + * I2O classes which could be handled by the OSM + */ +struct i2o_class_id { + u16 class_id:12; +}; + +/* + * I2O driver structure for OSMs + */ +struct i2o_driver { + char *name; /* OSM name */ + int context; /* Low 8 bits of the transaction info */ + struct i2o_class_id *classes; /* I2O classes that this OSM handles */ + + /* Message reply handler */ + int (*reply) (struct i2o_controller *, u32, struct i2o_message *); + + /* Event handler */ + work_func_t event; + + struct workqueue_struct *event_queue; /* Event queue */ + + struct device_driver driver; + + /* notification of changes */ + void (*notify_controller_add) (struct i2o_controller *); + void (*notify_controller_remove) (struct i2o_controller *); + void (*notify_device_add) (struct i2o_device *); + void (*notify_device_remove) (struct i2o_device *); + + struct semaphore lock; +}; + +/* + * Contains DMA mapped address information + */ +struct i2o_dma { + void *virt; + dma_addr_t phys; + size_t len; +}; + +/* + * Contains slab cache and mempool information + */ +struct i2o_pool { + char *name; + struct kmem_cache *slab; + mempool_t *mempool; +}; + +/* + * Contains IO mapped address information + */ +struct i2o_io { + void __iomem *virt; + unsigned long phys; + unsigned long len; +}; + +/* + * Context queue entry, used for 32-bit context on 64-bit systems + */ +struct i2o_context_list_element { + struct list_head list; + u32 context; + void *ptr; + unsigned long timestamp; +}; + +/* + * Each I2O controller has one of these objects + */ +struct i2o_controller { + char name[16]; + int unit; + int type; + + struct pci_dev *pdev; /* PCI device */ + + unsigned int promise:1; /* Promise controller */ + unsigned int adaptec:1; /* DPT / Adaptec controller */ + unsigned int raptor:1; /* split bar */ + unsigned int no_quiesce:1; /* dont quiesce before reset */ + unsigned int short_req:1; /* use small block sizes */ + unsigned int limit_sectors:1; /* limit number of sectors / request */ + unsigned int pae_support:1; /* controller has 64-bit SGL support */ + + struct list_head devices; /* list of I2O devices */ + struct list_head list; /* Controller list */ + + void __iomem *in_port; /* Inbout port address */ + void __iomem *out_port; /* Outbound port address */ + void __iomem *irq_status; /* Interrupt status register address */ + void __iomem *irq_mask; /* Interrupt mask register address */ + + struct i2o_dma status; /* IOP status block */ + + struct i2o_dma hrt; /* HW Resource Table */ + i2o_lct *lct; /* Logical Config Table */ + struct i2o_dma dlct; /* Temp LCT */ + struct mutex lct_lock; /* Lock for LCT updates */ + struct i2o_dma status_block; /* IOP status block */ + + struct i2o_io base; /* controller messaging unit */ + struct i2o_io in_queue; /* inbound message queue Host->IOP */ + struct i2o_dma out_queue; /* outbound message queue IOP->Host */ + + struct i2o_pool in_msg; /* mempool for inbound messages */ + + unsigned int battery:1; /* Has a battery backup */ + unsigned int io_alloc:1; /* An I/O resource was allocated */ + unsigned int mem_alloc:1; /* A memory resource was allocated */ + + struct resource io_resource; /* I/O resource allocated to the IOP */ + struct resource mem_resource; /* Mem resource allocated to the IOP */ struct device device; struct i2o_device *exec; /* Executive */ @@ -190,7 +570,6 @@ struct i2o_controller { #endif spinlock_t lock; /* lock for controller configuration */ - void *driver_data[I2O_MAX_DRIVERS]; /* storage for drivers */ }; @@ -231,25 +610,9 @@ struct i2o_sys_tbl { extern struct list_head i2o_controllers; /* Message functions */ -static inline u32 i2o_msg_get(struct i2o_controller *, struct i2o_message __iomem **); -extern u32 i2o_msg_get_wait(struct i2o_controller *, struct i2o_message __iomem **, - int); -static inline void i2o_msg_post(struct i2o_controller *, u32); -static inline int i2o_msg_post_wait(struct i2o_controller *, u32, - unsigned long); -extern int i2o_msg_post_wait_mem(struct i2o_controller *, u32, unsigned long, - struct i2o_dma *); -extern void i2o_msg_nop(struct i2o_controller *, u32); -static inline void i2o_flush_reply(struct i2o_controller *, u32); - -/* DMA handling functions */ -static inline int i2o_dma_alloc(struct device *, struct i2o_dma *, size_t, - unsigned int); -static inline void i2o_dma_free(struct device *, struct i2o_dma *); -int i2o_dma_realloc(struct device *, struct i2o_dma *, size_t, unsigned int); - -static inline int i2o_dma_map(struct device *, struct i2o_dma *); -static inline void i2o_dma_unmap(struct device *, struct i2o_dma *); +extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int); +extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *, + unsigned long, struct i2o_dma *); /* IOP functions */ extern int i2o_status_get(struct i2o_controller *); @@ -275,6 +638,16 @@ static inline u32 i2o_ptr_high(void *ptr) { return (u32) ((u64) ptr >> 32); }; + +static inline u32 i2o_dma_low(dma_addr_t dma_addr) +{ + return (u32) (u64) dma_addr; +}; + +static inline u32 i2o_dma_high(dma_addr_t dma_addr) +{ + return (u32) ((u64) dma_addr >> 32); +}; #else static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr) { @@ -301,656 +674,315 @@ static inline u32 i2o_ptr_low(void *ptr) return (u32) ptr; }; -static inline u32 i2o_ptr_high(void *ptr) -{ - return 0; -}; -#endif - -/* I2O driver (OSM) functions */ -extern int i2o_driver_register(struct i2o_driver *); -extern void i2o_driver_unregister(struct i2o_driver *); - -/** - * i2o_driver_notify_controller_add - Send notification of added controller - * to a single I2O driver - * - * Send notification of added controller to a single registered driver. - */ -static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv, - struct i2o_controller *c) -{ - if (drv->notify_controller_add) - drv->notify_controller_add(c); -}; - -/** - * i2o_driver_notify_controller_remove - Send notification of removed - * controller to a single I2O driver - * - * Send notification of removed controller to a single registered driver. - */ -static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv, - struct i2o_controller *c) -{ - if (drv->notify_controller_remove) - drv->notify_controller_remove(c); -}; - -/** - * i2o_driver_notify_device_add - Send notification of added device to a - * single I2O driver - * - * Send notification of added device to a single registered driver. - */ -static inline void i2o_driver_notify_device_add(struct i2o_driver *drv, - struct i2o_device *i2o_dev) -{ - if (drv->notify_device_add) - drv->notify_device_add(i2o_dev); -}; - -/** - * i2o_driver_notify_device_remove - Send notification of removed device - * to a single I2O driver - * - * Send notification of removed device to a single registered driver. - */ -static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv, - struct i2o_device *i2o_dev) -{ - if (drv->notify_device_remove) - drv->notify_device_remove(i2o_dev); -}; - -extern void i2o_driver_notify_controller_add_all(struct i2o_controller *); -extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *); -extern void i2o_driver_notify_device_add_all(struct i2o_device *); -extern void i2o_driver_notify_device_remove_all(struct i2o_device *); - -/* I2O device functions */ -extern int i2o_device_claim(struct i2o_device *); -extern int i2o_device_claim_release(struct i2o_device *); - -/* Exec OSM functions */ -extern int i2o_exec_lct_get(struct i2o_controller *); - -/* device / driver conversion functions */ -#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver) -#define to_i2o_device(dev) container_of(dev, struct i2o_device, device) -#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device) - -/** - * i2o_msg_get - obtain an I2O message from the IOP - * @c: I2O controller - * @msg: pointer to a I2O message pointer - * - * This function tries to get a message slot. If no message slot is - * available do not wait until one is availabe (see also i2o_msg_get_wait). - * - * On a success the message is returned and the pointer to the message is - * set in msg. The returned message is the physical page frame offset - * address from the read port (see the i2o spec). If no message is - * available returns I2O_QUEUE_EMPTY and msg is leaved untouched. - */ -static inline u32 i2o_msg_get(struct i2o_controller *c, - struct i2o_message __iomem **msg) -{ - u32 m = readl(c->in_port); - - if (m != I2O_QUEUE_EMPTY) { - *msg = c->in_queue.virt + m; - rmb(); - } - - return m; -}; - -/** - * i2o_msg_post - Post I2O message to I2O controller - * @c: I2O controller to which the message should be send - * @m: the message identifier - * - * Post the message to the I2O controller. - */ -static inline void i2o_msg_post(struct i2o_controller *c, u32 m) -{ - wmb(); - writel(m, c->in_port); -}; - -/** - * i2o_msg_post_wait - Post and wait a message and wait until return - * @c: controller - * @m: message to post - * @timeout: time in seconds to wait - * - * This API allows an OSM to post a message and then be told whether or - * not the system received a successful reply. If the message times out - * then the value '-ETIMEDOUT' is returned. - * - * Returns 0 on success or negative error code on failure. - */ -static inline int i2o_msg_post_wait(struct i2o_controller *c, u32 m, - unsigned long timeout) -{ - return i2o_msg_post_wait_mem(c, m, timeout, NULL); -}; - -/** - * i2o_flush_reply - Flush reply from I2O controller - * @c: I2O controller - * @m: the message identifier - * - * The I2O controller must be informed that the reply message is not needed - * anymore. If you forget to flush the reply, the message frame can't be - * used by the controller anymore and is therefore lost. - */ -static inline void i2o_flush_reply(struct i2o_controller *c, u32 m) -{ - writel(m, c->out_port); -}; - -/** - * i2o_out_to_virt - Turn an I2O message to a virtual address - * @c: controller - * @m: message engine value - * - * Turn a receive message from an I2O controller bus address into - * a Linux virtual address. The shared page frame is a linear block - * so we simply have to shift the offset. This function does not - * work for sender side messages as they are ioremap objects - * provided by the I2O controller. - */ -static inline struct i2o_message __iomem *i2o_msg_out_to_virt(struct - i2o_controller *c, - u32 m) -{ - BUG_ON(m < c->out_queue.phys - || m >= c->out_queue.phys + c->out_queue.len); - - return c->out_queue.virt + (m - c->out_queue.phys); -}; - -/** - * i2o_msg_in_to_virt - Turn an I2O message to a virtual address - * @c: controller - * @m: message engine value - * - * Turn a send message from an I2O controller bus address into - * a Linux virtual address. The shared page frame is a linear block - * so we simply have to shift the offset. This function does not - * work for receive side messages as they are kmalloc objects - * in a different pool. - */ -static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct i2o_controller *c, - u32 m) -{ - return c->in_queue.virt + m; -}; - -/** - * i2o_dma_alloc - Allocate DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should get the DMA buffer - * @len: length of the new DMA memory - * @gfp_mask: GFP mask - * - * Allocate a coherent DMA memory and write the pointers into addr. - * - * Returns 0 on success or -ENOMEM on failure. - */ -static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, - size_t len, unsigned int gfp_mask) +static inline u32 i2o_ptr_high(void *ptr) { - addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask); - if (!addr->virt) - return -ENOMEM; + return 0; +}; - memset(addr->virt, 0, len); - addr->len = len; +static inline u32 i2o_dma_low(dma_addr_t dma_addr) +{ + return (u32) dma_addr; +}; +static inline u32 i2o_dma_high(dma_addr_t dma_addr) +{ return 0; }; +#endif + +extern u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size); +extern dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, + size_t size, + enum dma_data_direction direction, + u32 ** sg_ptr); +extern int i2o_dma_map_sg(struct i2o_controller *c, + struct scatterlist *sg, int sg_count, + enum dma_data_direction direction, + u32 ** sg_ptr); +extern int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len); +extern void i2o_dma_free(struct device *dev, struct i2o_dma *addr); +extern int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, + size_t len); +extern int i2o_pool_alloc(struct i2o_pool *pool, const char *name, + size_t size, int min_nr); +extern void i2o_pool_free(struct i2o_pool *pool); +/* I2O driver (OSM) functions */ +extern int i2o_driver_register(struct i2o_driver *); +extern void i2o_driver_unregister(struct i2o_driver *); /** - * i2o_dma_free - Free DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which contains the DMA buffer + * i2o_driver_notify_controller_add - Send notification of added controller + * @drv: I2O driver + * @c: I2O controller * - * Free a coherent DMA memory and set virtual address of addr to NULL. + * Send notification of added controller to a single registered driver. */ -static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr) +static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv, + struct i2o_controller *c) { - if (addr->virt) { - if (addr->phys) - dma_free_coherent(dev, addr->len, addr->virt, - addr->phys); - else - kfree(addr->virt); - addr->virt = NULL; - } + if (drv->notify_controller_add) + drv->notify_controller_add(c); }; /** - * i2o_dma_map - Map the memory to DMA - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should be mapped - * - * Map the memory in addr->virt to coherent DMA memory and write the - * physical address into addr->phys. + * i2o_driver_notify_controller_remove - Send notification of removed controller + * @drv: I2O driver + * @c: I2O controller * - * Returns 0 on success or -ENOMEM on failure. + * Send notification of removed controller to a single registered driver. */ -static inline int i2o_dma_map(struct device *dev, struct i2o_dma *addr) +static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv, + struct i2o_controller *c) { - if (!addr->virt) - return -EFAULT; - - if (!addr->phys) - addr->phys = dma_map_single(dev, addr->virt, addr->len, - DMA_BIDIRECTIONAL); - if (!addr->phys) - return -ENOMEM; - - return 0; + if (drv->notify_controller_remove) + drv->notify_controller_remove(c); }; /** - * i2o_dma_unmap - Unmap the DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should be unmapped + * i2o_driver_notify_device_add - Send notification of added device + * @drv: I2O driver + * @i2o_dev: the added i2o_device * - * Unmap the memory in addr->virt from DMA memory. + * Send notification of added device to a single registered driver. */ -static inline void i2o_dma_unmap(struct device *dev, struct i2o_dma *addr) +static inline void i2o_driver_notify_device_add(struct i2o_driver *drv, + struct i2o_device *i2o_dev) { - if (!addr->virt) - return; - - if (addr->phys) { - dma_unmap_single(dev, addr->phys, addr->len, DMA_BIDIRECTIONAL); - addr->phys = 0; - } + if (drv->notify_device_add) + drv->notify_device_add(i2o_dev); }; -/* - * Endian handling wrapped into the macro - keeps the core code - * cleaner. - */ - -#define i2o_raw_writel(val, mem) __raw_writel(cpu_to_le32(val), mem) - -extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int); -extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int, - void *, int); - -/* debugging and troubleshooting/diagnostic helpers. */ -#define osm_printk(level, format, arg...) \ - printk(level "%s: " format, OSM_NAME , ## arg) - -#ifdef DEBUG -#define osm_debug(format, arg...) \ - osm_printk(KERN_DEBUG, format , ## arg) -#else -#define osm_debug(format, arg...) \ - do { } while (0) -#endif - -#define osm_err(format, arg...) \ - osm_printk(KERN_ERR, format , ## arg) -#define osm_info(format, arg...) \ - osm_printk(KERN_INFO, format , ## arg) -#define osm_warn(format, arg...) \ - osm_printk(KERN_WARNING, format , ## arg) - -/* debugging functions */ -extern void i2o_report_status(const char *, const char *, struct i2o_message *); -extern void i2o_dump_message(struct i2o_message *); -extern void i2o_dump_hrt(struct i2o_controller *c); -extern void i2o_debug_state(struct i2o_controller *c); - -/* - * Cache strategies - */ - -/* The NULL strategy leaves everything up to the controller. This tends to be a - * pessimal but functional choice. - */ -#define CACHE_NULL 0 -/* Prefetch data when reading. We continually attempt to load the next 32 sectors - * into the controller cache. - */ -#define CACHE_PREFETCH 1 -/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors - * into the controller cache. When an I/O is less <= 8K we assume its probably - * not sequential and don't prefetch (default) - */ -#define CACHE_SMARTFETCH 2 -/* Data is written to the cache and then out on to the disk. The I/O must be - * physically on the medium before the write is acknowledged (default without - * NVRAM) - */ -#define CACHE_WRITETHROUGH 17 -/* Data is written to the cache and then out on to the disk. The controller - * is permitted to write back the cache any way it wants. (default if battery - * backed NVRAM is present). It can be useful to set this for swap regardless of - * battery state. - */ -#define CACHE_WRITEBACK 18 -/* Optimise for under powered controllers, especially on RAID1 and RAID0. We - * write large I/O's directly to disk bypassing the cache to avoid the extra - * memory copy hits. Small writes are writeback cached - */ -#define CACHE_SMARTBACK 19 -/* Optimise for under powered controllers, especially on RAID1 and RAID0. We - * write large I/O's directly to disk bypassing the cache to avoid the extra - * memory copy hits. Small writes are writethrough cached. Suitable for devices - * lacking battery backup - */ -#define CACHE_SMARTTHROUGH 20 - -/* - * Ioctl structures - */ - -#define BLKI2OGRSTRAT _IOR('2', 1, int) -#define BLKI2OGWSTRAT _IOR('2', 2, int) -#define BLKI2OSRSTRAT _IOW('2', 3, int) -#define BLKI2OSWSTRAT _IOW('2', 4, int) - -/* - * I2O Function codes - */ - -/* - * Executive Class - */ -#define I2O_CMD_ADAPTER_ASSIGN 0xB3 -#define I2O_CMD_ADAPTER_READ 0xB2 -#define I2O_CMD_ADAPTER_RELEASE 0xB5 -#define I2O_CMD_BIOS_INFO_SET 0xA5 -#define I2O_CMD_BOOT_DEVICE_SET 0xA7 -#define I2O_CMD_CONFIG_VALIDATE 0xBB -#define I2O_CMD_CONN_SETUP 0xCA -#define I2O_CMD_DDM_DESTROY 0xB1 -#define I2O_CMD_DDM_ENABLE 0xD5 -#define I2O_CMD_DDM_QUIESCE 0xC7 -#define I2O_CMD_DDM_RESET 0xD9 -#define I2O_CMD_DDM_SUSPEND 0xAF -#define I2O_CMD_DEVICE_ASSIGN 0xB7 -#define I2O_CMD_DEVICE_RELEASE 0xB9 -#define I2O_CMD_HRT_GET 0xA8 -#define I2O_CMD_ADAPTER_CLEAR 0xBE -#define I2O_CMD_ADAPTER_CONNECT 0xC9 -#define I2O_CMD_ADAPTER_RESET 0xBD -#define I2O_CMD_LCT_NOTIFY 0xA2 -#define I2O_CMD_OUTBOUND_INIT 0xA1 -#define I2O_CMD_PATH_ENABLE 0xD3 -#define I2O_CMD_PATH_QUIESCE 0xC5 -#define I2O_CMD_PATH_RESET 0xD7 -#define I2O_CMD_STATIC_MF_CREATE 0xDD -#define I2O_CMD_STATIC_MF_RELEASE 0xDF -#define I2O_CMD_STATUS_GET 0xA0 -#define I2O_CMD_SW_DOWNLOAD 0xA9 -#define I2O_CMD_SW_UPLOAD 0xAB -#define I2O_CMD_SW_REMOVE 0xAD -#define I2O_CMD_SYS_ENABLE 0xD1 -#define I2O_CMD_SYS_MODIFY 0xC1 -#define I2O_CMD_SYS_QUIESCE 0xC3 -#define I2O_CMD_SYS_TAB_SET 0xA3 - -/* - * Utility Class - */ -#define I2O_CMD_UTIL_NOP 0x00 -#define I2O_CMD_UTIL_ABORT 0x01 -#define I2O_CMD_UTIL_CLAIM 0x09 -#define I2O_CMD_UTIL_RELEASE 0x0B -#define I2O_CMD_UTIL_PARAMS_GET 0x06 -#define I2O_CMD_UTIL_PARAMS_SET 0x05 -#define I2O_CMD_UTIL_EVT_REGISTER 0x13 -#define I2O_CMD_UTIL_EVT_ACK 0x14 -#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10 -#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D -#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F -#define I2O_CMD_UTIL_LOCK 0x17 -#define I2O_CMD_UTIL_LOCK_RELEASE 0x19 -#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15 - -/* - * SCSI Host Bus Adapter Class - */ -#define I2O_CMD_SCSI_EXEC 0x81 -#define I2O_CMD_SCSI_ABORT 0x83 -#define I2O_CMD_SCSI_BUSRESET 0x27 - -/* - * Random Block Storage Class +/** + * i2o_driver_notify_device_remove - Send notification of removed device + * @drv: I2O driver + * @i2o_dev: the added i2o_device + * + * Send notification of removed device to a single registered driver. */ -#define I2O_CMD_BLOCK_READ 0x30 -#define I2O_CMD_BLOCK_WRITE 0x31 -#define I2O_CMD_BLOCK_CFLUSH 0x37 -#define I2O_CMD_BLOCK_MLOCK 0x49 -#define I2O_CMD_BLOCK_MUNLOCK 0x4B -#define I2O_CMD_BLOCK_MMOUNT 0x41 -#define I2O_CMD_BLOCK_MEJECT 0x43 -#define I2O_CMD_BLOCK_POWER 0x70 - -#define I2O_PRIVATE_MSG 0xFF - -/* Command status values */ - -#define I2O_CMD_IN_PROGRESS 0x01 -#define I2O_CMD_REJECTED 0x02 -#define I2O_CMD_FAILED 0x03 -#define I2O_CMD_COMPLETED 0x04 - -/* I2O API function return values */ - -#define I2O_RTN_NO_ERROR 0 -#define I2O_RTN_NOT_INIT 1 -#define I2O_RTN_FREE_Q_EMPTY 2 -#define I2O_RTN_TCB_ERROR 3 -#define I2O_RTN_TRANSACTION_ERROR 4 -#define I2O_RTN_ADAPTER_ALREADY_INIT 5 -#define I2O_RTN_MALLOC_ERROR 6 -#define I2O_RTN_ADPTR_NOT_REGISTERED 7 -#define I2O_RTN_MSG_REPLY_TIMEOUT 8 -#define I2O_RTN_NO_STATUS 9 -#define I2O_RTN_NO_FIRM_VER 10 -#define I2O_RTN_NO_LINK_SPEED 11 - -/* Reply message status defines for all messages */ +static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv, + struct i2o_device *i2o_dev) +{ + if (drv->notify_device_remove) + drv->notify_device_remove(i2o_dev); +}; -#define I2O_REPLY_STATUS_SUCCESS 0x00 -#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01 -#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02 -#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03 -#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04 -#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05 -#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06 -#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08 -#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09 -#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A -#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B -#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80 +extern void i2o_driver_notify_controller_add_all(struct i2o_controller *); +extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *); +extern void i2o_driver_notify_device_add_all(struct i2o_device *); +extern void i2o_driver_notify_device_remove_all(struct i2o_device *); -/* Status codes and Error Information for Parameter functions */ +/* I2O device functions */ +extern int i2o_device_claim(struct i2o_device *); +extern int i2o_device_claim_release(struct i2o_device *); -#define I2O_PARAMS_STATUS_SUCCESS 0x00 -#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01 -#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02 -#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03 -#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04 -#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05 -#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06 -#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07 -#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08 -#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09 -#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A -#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B -#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C -#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D -#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E -#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F -#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10 +/* Exec OSM functions */ +extern int i2o_exec_lct_get(struct i2o_controller *); -/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error - * messages: Table 3-2 Detailed Status Codes.*/ +/* device / driver / kobject conversion functions */ +#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver) +#define to_i2o_device(dev) container_of(dev, struct i2o_device, device) +#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device) +#define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj)) -#define I2O_DSC_SUCCESS 0x0000 -#define I2O_DSC_BAD_KEY 0x0002 -#define I2O_DSC_TCL_ERROR 0x0003 -#define I2O_DSC_REPLY_BUFFER_FULL 0x0004 -#define I2O_DSC_NO_SUCH_PAGE 0x0005 -#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006 -#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007 -#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009 -#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A -#define I2O_DSC_DEVICE_LOCKED 0x000B -#define I2O_DSC_DEVICE_RESET 0x000C -#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D -#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E -#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F -#define I2O_DSC_INVALID_OFFSET 0x0010 -#define I2O_DSC_INVALID_PARAMETER 0x0011 -#define I2O_DSC_INVALID_REQUEST 0x0012 -#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013 -#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014 -#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015 -#define I2O_DSC_MISSING_PARAMETER 0x0016 -#define I2O_DSC_TIMEOUT 0x0017 -#define I2O_DSC_UNKNOWN_ERROR 0x0018 -#define I2O_DSC_UNKNOWN_FUNCTION 0x0019 -#define I2O_DSC_UNSUPPORTED_VERSION 0x001A -#define I2O_DSC_DEVICE_BUSY 0x001B -#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C +/** + * i2o_out_to_virt - Turn an I2O message to a virtual address + * @c: controller + * @m: message engine value + * + * Turn a receive message from an I2O controller bus address into + * a Linux virtual address. The shared page frame is a linear block + * so we simply have to shift the offset. This function does not + * work for sender side messages as they are ioremap objects + * provided by the I2O controller. + */ +static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c, + u32 m) +{ + BUG_ON(m < c->out_queue.phys + || m >= c->out_queue.phys + c->out_queue.len); -/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed - Status Codes.*/ + return c->out_queue.virt + (m - c->out_queue.phys); +}; -#define I2O_BSA_DSC_SUCCESS 0x0000 -#define I2O_BSA_DSC_MEDIA_ERROR 0x0001 -#define I2O_BSA_DSC_ACCESS_ERROR 0x0002 -#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003 -#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004 -#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005 -#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006 -#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007 -#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008 -#define I2O_BSA_DSC_BUS_FAILURE 0x0009 -#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A -#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B -#define I2O_BSA_DSC_DEVICE_RESET 0x000C -#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D -#define I2O_BSA_DSC_TIMEOUT 0x000E +/** + * i2o_msg_in_to_virt - Turn an I2O message to a virtual address + * @c: controller + * @m: message engine value + * + * Turn a send message from an I2O controller bus address into + * a Linux virtual address. The shared page frame is a linear block + * so we simply have to shift the offset. This function does not + * work for receive side messages as they are kmalloc objects + * in a different pool. + */ +static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct + i2o_controller *c, + u32 m) +{ + return c->in_queue.virt + m; +}; -/* FailureStatusCodes, Table 3-3 Message Failure Codes */ +/** + * i2o_msg_get - obtain an I2O message from the IOP + * @c: I2O controller + * + * This function tries to get a message frame. If no message frame is + * available do not wait until one is availabe (see also i2o_msg_get_wait). + * The returned pointer to the message frame is not in I/O memory, it is + * allocated from a mempool. But because a MFA is allocated from the + * controller too it is guaranteed that i2o_msg_post() will never fail. + * + * On a success a pointer to the message frame is returned. If the message + * queue is empty -EBUSY is returned and if no memory is available -ENOMEM + * is returned. + */ +static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c) +{ + struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC); + if (!mmsg) + return ERR_PTR(-ENOMEM); -#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81 -#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82 -#define I2O_FSC_TRANSPORT_CONGESTION 0x83 -#define I2O_FSC_TRANSPORT_FAILURE 0x84 -#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85 -#define I2O_FSC_TRANSPORT_TIME_OUT 0x86 -#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87 -#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88 -#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89 -#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A -#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B -#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C -#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D -#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E -#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F -#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF + mmsg->mfa = readl(c->in_port); + if (unlikely(mmsg->mfa >= c->in_queue.len)) { + u32 mfa = mmsg->mfa; -/* Device Claim Types */ -#define I2O_CLAIM_PRIMARY 0x01000000 -#define I2O_CLAIM_MANAGEMENT 0x02000000 -#define I2O_CLAIM_AUTHORIZED 0x03000000 -#define I2O_CLAIM_SECONDARY 0x04000000 + mempool_free(mmsg, c->in_msg.mempool); -/* Message header defines for VersionOffset */ -#define I2OVER15 0x0001 -#define I2OVER20 0x0002 + if (mfa == I2O_QUEUE_EMPTY) + return ERR_PTR(-EBUSY); + return ERR_PTR(-EFAULT); + } -/* Default is 1.5 */ -#define I2OVERSION I2OVER15 + return &mmsg->msg; +}; -#define SGL_OFFSET_0 I2OVERSION -#define SGL_OFFSET_4 (0x0040 | I2OVERSION) -#define SGL_OFFSET_5 (0x0050 | I2OVERSION) -#define SGL_OFFSET_6 (0x0060 | I2OVERSION) -#define SGL_OFFSET_7 (0x0070 | I2OVERSION) -#define SGL_OFFSET_8 (0x0080 | I2OVERSION) -#define SGL_OFFSET_9 (0x0090 | I2OVERSION) -#define SGL_OFFSET_10 (0x00A0 | I2OVERSION) +/** + * i2o_msg_post - Post I2O message to I2O controller + * @c: I2O controller to which the message should be send + * @msg: message returned by i2o_msg_get() + * + * Post the message to the I2O controller and return immediately. + */ +static inline void i2o_msg_post(struct i2o_controller *c, + struct i2o_message *msg) +{ + struct i2o_msg_mfa *mmsg; -#define TRL_OFFSET_5 (0x0050 | I2OVERSION) -#define TRL_OFFSET_6 (0x0060 | I2OVERSION) + mmsg = container_of(msg, struct i2o_msg_mfa, msg); + memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg, + (le32_to_cpu(msg->u.head[0]) >> 16) << 2); + writel(mmsg->mfa, c->in_port); + mempool_free(mmsg, c->in_msg.mempool); +}; -/* Transaction Reply Lists (TRL) Control Word structure */ -#define TRL_SINGLE_FIXED_LENGTH 0x00 -#define TRL_SINGLE_VARIABLE_LENGTH 0x40 -#define TRL_MULTIPLE_FIXED_LENGTH 0x80 +/** + * i2o_msg_post_wait - Post and wait a message and wait until return + * @c: controller + * @msg: message to post + * @timeout: time in seconds to wait + * + * This API allows an OSM to post a message and then be told whether or + * not the system received a successful reply. If the message times out + * then the value '-ETIMEDOUT' is returned. + * + * Returns 0 on success or negative error code on failure. + */ +static inline int i2o_msg_post_wait(struct i2o_controller *c, + struct i2o_message *msg, + unsigned long timeout) +{ + return i2o_msg_post_wait_mem(c, msg, timeout, NULL); +}; - /* msg header defines for MsgFlags */ -#define MSG_STATIC 0x0100 -#define MSG_64BIT_CNTXT 0x0200 -#define MSG_MULTI_TRANS 0x1000 -#define MSG_FAIL 0x2000 -#define MSG_FINAL 0x4000 -#define MSG_REPLY 0x8000 +/** + * i2o_msg_nop_mfa - Returns a fetched MFA back to the controller + * @c: I2O controller from which the MFA was fetched + * @mfa: MFA which should be returned + * + * This function must be used for preserved messages, because i2o_msg_nop() + * also returns the allocated memory back to the msg_pool mempool. + */ +static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa) +{ + struct i2o_message __iomem *msg; + u32 nop[3] = { + THREE_WORD_MSG_SIZE | SGL_OFFSET_0, + I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID, + 0x00000000 + }; - /* minimum size msg */ -#define THREE_WORD_MSG_SIZE 0x00030000 -#define FOUR_WORD_MSG_SIZE 0x00040000 -#define FIVE_WORD_MSG_SIZE 0x00050000 -#define SIX_WORD_MSG_SIZE 0x00060000 -#define SEVEN_WORD_MSG_SIZE 0x00070000 -#define EIGHT_WORD_MSG_SIZE 0x00080000 -#define NINE_WORD_MSG_SIZE 0x00090000 -#define TEN_WORD_MSG_SIZE 0x000A0000 -#define ELEVEN_WORD_MSG_SIZE 0x000B0000 -#define I2O_MESSAGE_SIZE(x) ((x)<<16) + msg = i2o_msg_in_to_virt(c, mfa); + memcpy_toio(msg, nop, sizeof(nop)); + writel(mfa, c->in_port); +}; -/* Special TID Assignments */ +/** + * i2o_msg_nop - Returns a message which is not used + * @c: I2O controller from which the message was created + * @msg: message which should be returned + * + * If you fetch a message via i2o_msg_get, and can't use it, you must + * return the message with this function. Otherwise the MFA is lost as well + * as the allocated memory from the mempool. + */ +static inline void i2o_msg_nop(struct i2o_controller *c, + struct i2o_message *msg) +{ + struct i2o_msg_mfa *mmsg; + mmsg = container_of(msg, struct i2o_msg_mfa, msg); -#define ADAPTER_TID 0 -#define HOST_TID 1 + i2o_msg_nop_mfa(c, mmsg->mfa); + mempool_free(mmsg, c->in_msg.mempool); +}; -#define MSG_FRAME_SIZE 128 /* i2o_scsi assumes >= 32 */ -#define REPLY_FRAME_SIZE 17 -#define SG_TABLESIZE 30 -#define NMBR_MSG_FRAMES 128 +/** + * i2o_flush_reply - Flush reply from I2O controller + * @c: I2O controller + * @m: the message identifier + * + * The I2O controller must be informed that the reply message is not needed + * anymore. If you forget to flush the reply, the message frame can't be + * used by the controller anymore and is therefore lost. + */ +static inline void i2o_flush_reply(struct i2o_controller *c, u32 m) +{ + writel(m, c->out_port); +}; -#define MSG_POOL_SIZE (MSG_FRAME_SIZE*NMBR_MSG_FRAMES*sizeof(u32)) +/* + * Endian handling wrapped into the macro - keeps the core code + * cleaner. + */ -#define I2O_POST_WAIT_OK 0 -#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT +#define i2o_raw_writel(val, mem) __raw_writel(cpu_to_le32(val), mem) -#define I2O_CONTEXT_LIST_MIN_LENGTH 15 -#define I2O_CONTEXT_LIST_USED 0x01 -#define I2O_CONTEXT_LIST_DELETED 0x02 +extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int); +extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int, + void *, int); -/* timeouts */ -#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15 -#define I2O_TIMEOUT_MESSAGE_GET 5 -#define I2O_TIMEOUT_RESET 30 -#define I2O_TIMEOUT_STATUS_GET 5 -#define I2O_TIMEOUT_LCT_GET 360 -#define I2O_TIMEOUT_SCSI_SCB_ABORT 240 +/* debugging and troubleshooting/diagnostic helpers. */ +#define osm_printk(level, format, arg...) \ + printk(level "%s: " format, OSM_NAME , ## arg) -/* retries */ -#define I2O_HRT_GET_TRIES 3 -#define I2O_LCT_GET_TRIES 3 +#ifdef DEBUG +#define osm_debug(format, arg...) \ + osm_printk(KERN_DEBUG, format , ## arg) +#else +#define osm_debug(format, arg...) \ + do { } while (0) +#endif -/* request queue sizes */ -#define I2O_MAX_SECTORS 1024 -#define I2O_MAX_SEGMENTS 128 +#define osm_err(format, arg...) \ + osm_printk(KERN_ERR, format , ## arg) +#define osm_info(format, arg...) \ + osm_printk(KERN_INFO, format , ## arg) +#define osm_warn(format, arg...) \ + osm_printk(KERN_WARNING, format , ## arg) -#define I2O_REQ_MEMPOOL_SIZE 32 +/* debugging functions */ +extern void i2o_report_status(const char *, const char *, struct i2o_message *); +extern void i2o_dump_message(struct i2o_message *); +extern void i2o_dump_hrt(struct i2o_controller *c); +extern void i2o_debug_state(struct i2o_controller *c); -#endif /* __KERNEL__ */ #endif /* _I2O_H */