X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fi2c%2Fbusses%2Fi2c-ali1535.c;h=8de7d7b87bb07f26aecf2f2bb6ac79b2952bc3f9;hb=80ad89a0ceb3b16d0f670751ef9875c4569fb4d3;hp=1e277ba5a9f34aaa3f2f6beee5704c447d79edd0;hpb=405ae7d381302468ecc803f2148a2ae40a04c999;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 1e277ba..8de7d7b 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -1,6 +1,4 @@
 /*
-    i2c-ali1535.c - Part of lm_sensors, Linux kernel modules for hardware
-                    monitoring
     Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>, 
                         Philip Edelbrock <phil@netroedge.com>, 
                         Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -61,6 +59,7 @@
 #include <linux/ioport.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include <asm/io.h>
 
 
@@ -139,7 +138,7 @@ static unsigned short ali1535_smba;
    Note the differences between kernels with the old PCI BIOS interface and
    newer kernels with the real PCI interface. In compat.h some things are
    defined to make the transition easier. */
-static int ali1535_setup(struct pci_dev *dev)
+static int __devinit ali1535_setup(struct pci_dev *dev)
 {
 	int retval = -ENODEV;
 	unsigned char temp;
@@ -159,6 +158,11 @@ static int ali1535_setup(struct pci_dev *dev)
 		goto exit;
 	}
 
+	retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+				   ali1535_driver.name);
+	if (retval)
+		goto exit;
+
 	if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
 			    ali1535_driver.name)) {
 		dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
@@ -259,7 +263,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 			dev_err(&adap->dev,
 				"SMBus reset failed! (0x%02x) - controller or "
 				"device on bus is probably hung\n", temp);
-			return -1;
+			return -EBUSY;
 		}
 	} else {
 		/* check and clear done bit */
@@ -280,13 +284,13 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 		 && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
-		result = -1;
+	if (timeout > MAX_TIMEOUT) {
+		result = -ETIMEDOUT;
 		dev_err(&adap->dev, "SMBus Timeout!\n");
 	}
 
 	if (temp & ALI1535_STS_FAIL) {
-		result = -1;
+		result = -EIO;
 		dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
 	}
 
@@ -295,7 +299,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	 * do a printk.  This means that bus collisions go unreported.
 	 */
 	if (temp & ALI1535_STS_BUSERR) {
-		result = -1;
+		result = -ENXIO;
 		dev_dbg(&adap->dev,
 			"Error: no response or bus collision ADD=%02x\n",
 			inb_p(SMBHSTADD));
@@ -303,13 +307,13 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 
 	/* haven't ever seen this */
 	if (temp & ALI1535_STS_DEV) {
-		result = -1;
+		result = -EIO;
 		dev_err(&adap->dev, "Error: device error\n");
 	}
 
 	/* check to see if the "command complete" indication is set */
 	if (!(temp & ALI1535_STS_DONE)) {
-		result = -1;
+		result = -ETIMEDOUT;
 		dev_err(&adap->dev, "Error: command never completed\n");
 	}
 
@@ -332,7 +336,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	return result;
 }
 
-/* Return -1 on error. */
+/* Return negative errno on error. */
 static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 			  unsigned short flags, char read_write, u8 command,
 			  int size, union i2c_smbus_data *data)
@@ -357,10 +361,6 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 	outb_p(0xFF, SMBHSTSTS);
 
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		result = -1;
-		goto EXIT;
 	case I2C_SMBUS_QUICK:
 		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMBHSTADD);
@@ -418,13 +418,15 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 				outb_p(data->block[i], SMBBLKDAT);
 		}
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		result = -EOPNOTSUPP;
+		goto EXIT;
 	}
 
-	if (ali1535_transaction(adap)) {
-		/* Error in transaction */
-		result = -1;
+	result = ali1535_transaction(adap);
+	if (result)
 		goto EXIT;
-	}
 
 	if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) {
 		result = 0;
@@ -474,8 +476,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter ali1535_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI1535,
-	.class          = I2C_CLASS_HWMON,
+	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
 
@@ -497,7 +498,7 @@ static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_
 	/* set up the sysfs linkage to our parent device */
 	ali1535_adapter.dev.parent = &dev->dev;
 
-	snprintf(ali1535_adapter.name, I2C_NAME_SIZE, 
+	snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
 		"SMBus ALI1535 adapter at %04x", ali1535_smba);
 	return i2c_add_adapter(&ali1535_adapter);
 }