X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;ds=sidebyside;f=arch%2Fx86%2Fkernel%2Fhead64.c;h=b5a9896ca1e74be8805c4f5384ffc8d50f6589b6;hb=8c48e444191de0ff84e85d41180d7bc3e74f14ef;hp=0ab59edd70676ff5f93a9f71d80ac1f1592ca7af;hpb=3461b0af025251bbc6b3d56c821c6ac2de6f7209;p=safe%2Fjmp%2Flinux-2.6

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 0ab59ed..b5a9896 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -23,26 +23,9 @@
 #include <asm/sections.h>
 #include <asm/kdebug.h>
 #include <asm/e820.h>
+#include <asm/trampoline.h>
 #include <asm/bios_ebda.h>
 
-/* boot cpu pda */
-static struct x8664_pda _boot_cpu_pda __read_mostly;
-
-#ifdef CONFIG_SMP
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-/*
- * We install an empty cpu_pda pointer table to trap references before
- * the actual cpu_pda pointer table is created in setup_cpu_pda_map().
- */
-static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata;
-#else
-static struct x8664_pda *__cpu_pda[1] __read_mostly;
-#endif
-
-#else /* !CONFIG_SMP (NR_CPUS will be 1) */
-static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly;
-#endif
-
 static void __init zap_identity_mappings(void)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
@@ -69,74 +52,6 @@ static void __init copy_bootdata(char *real_mode_data)
 	}
 }
 
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
-	unsigned int lowmem, ebda_addr;
-
-	/* To determine the position of the EBDA and the */
-	/* end of conventional memory, we need to look at */
-	/* the BIOS data area. In a paravirtual environment */
-	/* that area is absent. We'll just have to assume */
-	/* that the paravirt case can handle memory setup */
-	/* correctly, without our help. */
-	if (paravirt_enabled())
-		return;
-
-	/* end of low (conventional) memory */
-	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
-	lowmem <<= 10;
-
-	/* start of EBDA area */
-	ebda_addr = get_bios_ebda();
-
-	/* Fixup: bios puts an EBDA in the top 64K segment */
-	/* of conventional memory, but does not adjust lowmem. */
-	if ((lowmem - ebda_addr) <= 0x10000)
-		lowmem = ebda_addr;
-
-	/* Fixup: bios does not report an EBDA at all. */
-	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
-	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
-		lowmem = 0x9f000;
-
-	/* Paranoia: should never happen, but... */
-	if ((lowmem == 0) || (lowmem >= 0x100000))
-		lowmem = 0x9f000;
-
-	/* reserve all memory between lowmem and the 1MB mark */
-	reserve_early(lowmem, 0x100000, "BIOS reserved");
-}
-
-static void __init reserve_setup_data(void)
-{
-	struct setup_data *data;
-	unsigned long pa_data;
-	char buf[32];
-
-	if (boot_params.hdr.version < 0x0209)
-		return;
-	pa_data = boot_params.hdr.setup_data;
-	while (pa_data) {
-		data = early_ioremap(pa_data, sizeof(*data));
-		sprintf(buf, "setup data %x", data->type);
-		reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
-		pa_data = data->next;
-		early_iounmap(data, sizeof(*data));
-	}
-}
-
 void __init x86_64_start_kernel(char * real_mode_data)
 {
 	int i;
@@ -153,6 +68,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
 	BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
 				(__START_KERNEL & PGDIR_MASK)));
+	BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END);
 
 	/* clear bss before set_intr_gate with early_idt_handler */
 	clear_bss();
@@ -172,17 +88,17 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	}
 	load_idt((const struct desc_ptr *)&idt_descr);
 
-	early_printk("Kernel alive\n");
-
-	_cpu_pda = __cpu_pda;
-	cpu_pda(0) = &_boot_cpu_pda;
-	pda_init(0);
+	if (console_loglevel == 10)
+		early_printk("Kernel alive\n");
 
-	early_printk("Kernel really alive\n");
+	x86_64_start_reservations(real_mode_data);
+}
 
+void __init x86_64_start_reservations(char *real_mode_data)
+{
 	copy_bootdata(__va(real_mode_data));
 
-	reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");
+	reserve_early(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
@@ -195,7 +111,6 @@ void __init x86_64_start_kernel(char * real_mode_data)
 #endif
 
 	reserve_ebda_region();
-	reserve_setup_data();
 
 	/*
 	 * At this point everything still needed from the boot loader