#include "wm8903.h"
-struct wm8903_priv {
- int sysclk;
-
- /* Reference counts */
- int charge_pump_users;
- int class_w_users;
- int playback_active;
- int capture_active;
-
- struct snd_pcm_substream *master_substream;
- struct snd_pcm_substream *slave_substream;
-};
-
/* Register defaults at reset */
static u16 wm8903_reg_defaults[] = {
0x8903, /* R0 - SW Reset and ID */
0x0000, /* R172 - Analogue Output Bias 0 */
};
+struct wm8903_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)];
+
+ int sysclk;
+
+ /* Reference counts */
+ int charge_pump_users;
+ int class_w_users;
+ int playback_active;
+ int capture_active;
+
+ struct snd_pcm_substream *master_substream;
+ struct snd_pcm_substream *slave_substream;
+};
+
+
static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec,
unsigned int reg)
{
static void wm8903_reset(struct snd_soc_codec *codec)
{
wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0);
+ memcpy(codec->reg_cache, wm8903_reg_defaults,
+ sizeof(wm8903_reg_defaults));
}
#define WM8903_OUTPUT_SHORT 0x8
break;
default:
BUG();
+ return -EINVAL; /* Spurious warning from some compilers */
}
switch (w->shift) {
break;
default:
BUG();
+ return -EINVAL; /* Spurious warning from some compilers */
}
if (event & SND_SOC_DAPM_PRE_PMU) {
0, 63, 0, out_tlv),
};
-static int wm8903_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8903_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8903_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
static const struct snd_kcontrol_new linput_mode_mux =
SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum);
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
-SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
+SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0),
};
static const struct snd_kcontrol_new right_output_mixer[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0),
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
-SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
+SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0),
};
static const struct snd_kcontrol_new left_speaker_mixer[] = {
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0,
- 1, 1, 0),
+ 0, 1, 0),
};
static const struct snd_kcontrol_new right_speaker_mixer[] = {
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
1, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
- 1, 1, 0),
+ 0, 1, 0),
};
static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ wm8903_write(codec, WM8903_CLOCK_RATES_2,
+ WM8903_CLK_SYS_ENA);
+
wm8903_run_sequence(codec, 0);
wm8903_sync_reg_cache(codec, codec->reg_cache);
case SND_SOC_BIAS_OFF:
wm8903_run_sequence(codec, 32);
+ reg = wm8903_read(codec, WM8903_CLOCK_RATES_2);
+ reg &= ~WM8903_CLK_SYS_ENA;
+ wm8903_write(codec, WM8903_CLOCK_RATES_2, reg);
break;
}
return 0;
}
-/*
- * initialise the WM8903 driver
- * register the mixer and dsp interfaces with the kernel
- */
-static int wm8903_init(struct snd_soc_device *socdev)
+static struct snd_soc_codec *wm8903_codec;
+
+static int wm8903_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
{
- struct snd_soc_codec *codec = socdev->codec;
- struct i2c_client *i2c = codec->control_data;
- int ret = 0;
+ struct wm8903_priv *wm8903;
+ struct snd_soc_codec *codec;
+ int ret;
u16 val;
- val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
- if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
- dev_err(&i2c->dev,
- "Device with ID register %x is not a WM8903\n", val);
- return -ENODEV;
- }
+ wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
+ if (wm8903 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8903->codec;
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->dev = &i2c->dev;
codec->name = "WM8903";
codec->owner = THIS_MODULE;
codec->read = wm8903_read;
codec->write = wm8903_write;
+ codec->hw_write = (hw_write_t)i2c_master_send;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8903_set_bias_level;
codec->dai = &wm8903_dai;
codec->num_dai = 1;
- codec->reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults);
- codec->reg_cache = kmemdup(wm8903_reg_defaults,
- sizeof(wm8903_reg_defaults),
- GFP_KERNEL);
- if (codec->reg_cache == NULL) {
- dev_err(&i2c->dev, "Failed to allocate register cache\n");
- return -ENOMEM;
+ codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
+ codec->reg_cache = &wm8903->reg_cache[0];
+ codec->private_data = wm8903;
+
+ i2c_set_clientdata(i2c, codec);
+ codec->control_data = i2c;
+
+ val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
+ if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
+ dev_err(&i2c->dev,
+ "Device with ID register %x is not a WM8903\n", val);
+ return -ENODEV;
}
val = wm8903_read(codec, WM8903_REVISION_NUMBER);
wm8903_reset(codec);
- /* register pcms */
- ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
- if (ret < 0) {
- dev_err(&i2c->dev, "failed to create pcms\n");
- goto pcm_err;
- }
-
- /* SYSCLK is required for pretty much anything */
- wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA);
-
/* power on device */
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
val |= WM8903_DAC_MUTEMODE;
wm8903_write(codec, WM8903_DAC_DIGITAL_1, val);
- wm8903_add_controls(codec);
- wm8903_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
- if (ret < 0) {
- dev_err(&i2c->dev, "wm8903: failed to register card\n");
- goto card_err;
+ wm8903_dai.dev = &i2c->dev;
+ wm8903_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dai(&wm8903_dai);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
}
return ret;
-card_err:
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
-pcm_err:
- kfree(codec->reg_cache);
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ wm8903_codec = NULL;
+ kfree(wm8903);
return ret;
}
-static struct snd_soc_device *wm8903_socdev;
-
-static int wm8903_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int wm8903_i2c_remove(struct i2c_client *client)
{
- struct snd_soc_device *socdev = wm8903_socdev;
- struct snd_soc_codec *codec = socdev->codec;
- int ret;
+ struct snd_soc_codec *codec = i2c_get_clientdata(client);
- i2c_set_clientdata(i2c, codec);
- codec->control_data = i2c;
+ snd_soc_unregister_dai(&wm8903_dai);
+ snd_soc_unregister_codec(codec);
+
+ wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
- ret = wm8903_init(socdev);
- if (ret < 0)
- dev_err(&i2c->dev, "Device initialisation failed\n");
+ kfree(codec->private_data);
- return ret;
-}
+ wm8903_codec = NULL;
+ wm8903_dai.dev = NULL;
-static int wm8903_i2c_remove(struct i2c_client *client)
-{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
- kfree(codec->reg_cache);
return 0;
}
static int wm8903_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct wm8903_setup_data *setup;
- struct snd_soc_codec *codec;
- struct wm8903_priv *wm8903;
- struct i2c_board_info board_info;
- struct i2c_adapter *adapter;
- struct i2c_client *i2c_client;
int ret = 0;
- setup = socdev->codec_data;
-
- if (!setup->i2c_address) {
- dev_err(&pdev->dev, "No codec address provided\n");
- return -ENODEV;
+ if (!wm8903_codec) {
+ dev_err(&pdev->dev, "I2C device not yet probed\n");
+ goto err;
}
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
- return -ENOMEM;
+ socdev->codec = wm8903_codec;
- wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
- if (wm8903 == NULL) {
- ret = -ENOMEM;
- goto err_codec;
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to create pcms\n");
+ goto err;
}
- codec->private_data = wm8903;
- socdev->codec = codec;
- mutex_init(&codec->mutex);
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
-
- wm8903_socdev = socdev;
-
- codec->hw_write = (hw_write_t)i2c_master_send;
- ret = i2c_add_driver(&wm8903_i2c_driver);
- if (ret != 0) {
- dev_err(&pdev->dev, "can't add i2c driver\n");
- goto err_priv;
- } else {
- memset(&board_info, 0, sizeof(board_info));
- strlcpy(board_info.type, "wm8903", I2C_NAME_SIZE);
- board_info.addr = setup->i2c_address;
-
- adapter = i2c_get_adapter(setup->i2c_bus);
- if (!adapter) {
- dev_err(&pdev->dev, "Can't get I2C bus %d\n",
- setup->i2c_bus);
- ret = -ENODEV;
- goto err_adapter;
- }
+ snd_soc_add_controls(socdev->codec, wm8903_snd_controls,
+ ARRAY_SIZE(wm8903_snd_controls));
+ wm8903_add_widgets(socdev->codec);
- i2c_client = i2c_new_device(adapter, &board_info);
- i2c_put_adapter(adapter);
- if (i2c_client == NULL) {
- dev_err(&pdev->dev,
- "I2C driver registration failed\n");
- ret = -ENODEV;
- goto err_adapter;
- }
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "wm8903: failed to register card\n");
+ goto card_err;
}
return ret;
-err_adapter:
- i2c_del_driver(&wm8903_i2c_driver);
-err_priv:
- kfree(codec->private_data);
-err_codec:
- kfree(codec);
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+err:
return ret;
}
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
- i2c_unregister_device(socdev->codec->control_data);
- i2c_del_driver(&wm8903_i2c_driver);
- kfree(codec->private_data);
- kfree(codec);
return 0;
}
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
+static int __init wm8903_modinit(void)
+{
+ return i2c_add_driver(&wm8903_i2c_driver);
+}
+module_init(wm8903_modinit);
+
+static void __exit wm8903_exit(void)
+{
+ i2c_del_driver(&wm8903_i2c_driver);
+}
+module_exit(wm8903_exit);
+
MODULE_DESCRIPTION("ASoC WM8903 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>");
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff