+# Helper to resolve issues with configs that have SPI enabled but I2C
+# modular, meaning we can't build the codec driver in with I2C support.
+# We use an ordered list of conditional defaults to pick the appropriate
+# setting - SPI can't be modular so that case doesn't need to be covered.
+config SND_SOC_I2C_AND_SPI
+ tristate
+ default m if I2C=m
+ default y if I2C=y
+ default y if SPI_MASTER=y
+
config SND_SOC_ALL_CODECS
tristate "Build all ASoC CODEC drivers"
- depends on I2C
- select SPI
- select SPI_MASTER
- select SND_SOC_AD73311
- select SND_SOC_AK4535
- select SND_SOC_CS4270
- select SND_SOC_SSM2602
- select SND_SOC_TLV320AIC23
- select SND_SOC_TLV320AIC26
- select SND_SOC_TLV320AIC3X
- select SND_SOC_UDA1380
- select SND_SOC_WM8510
- select SND_SOC_WM8580
- select SND_SOC_WM8731
- select SND_SOC_WM8750
- select SND_SOC_WM8753
- select SND_SOC_WM8900
- select SND_SOC_WM8903
- select SND_SOC_WM8971
- select SND_SOC_WM8990
+ select SND_SOC_L3
+ select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
+ select SND_SOC_AD1836 if SPI_MASTER
+ select SND_SOC_AD1938 if SPI_MASTER
+ select SND_SOC_AD1980 if SND_SOC_AC97_BUS
+ select SND_SOC_ADS117X
+ select SND_SOC_AD73311 if I2C
+ select SND_SOC_AK4104 if SPI_MASTER
+ select SND_SOC_AK4535 if I2C
+ select SND_SOC_AK4642 if I2C
+ select SND_SOC_AK4671 if I2C
+ select SND_SOC_CS4270 if I2C
+ select SND_SOC_MAX9877 if I2C
+ select SND_SOC_PCM3008
+ select SND_SOC_SPDIF
+ select SND_SOC_SSM2602 if I2C
+ select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
+ select SND_SOC_TLV320AIC23 if I2C
+ select SND_SOC_TLV320AIC26 if SPI_MASTER
+ select SND_SOC_TLV320AIC3X if I2C
+ select SND_SOC_TPA6130A2 if I2C
+ select SND_SOC_TLV320DAC33 if I2C
+ select SND_SOC_TWL4030 if TWL4030_CORE
+ select SND_SOC_UDA134X
+ select SND_SOC_UDA1380 if I2C
+ select SND_SOC_WM8350 if MFD_WM8350
+ select SND_SOC_WM8400 if MFD_WM8400
+ select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8523 if I2C
+ select SND_SOC_WM8580 if I2C
+ select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8727
+ select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8900 if I2C
+ select SND_SOC_WM8903 if I2C
+ select SND_SOC_WM8940 if I2C
+ select SND_SOC_WM8960 if I2C
+ select SND_SOC_WM8961 if I2C
+ select SND_SOC_WM8971 if I2C
+ select SND_SOC_WM8974 if I2C
+ select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8990 if I2C
+ select SND_SOC_WM8993 if I2C
+ select SND_SOC_WM9081 if I2C
+ select SND_SOC_WM9705 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9712 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9713 if SND_SOC_AC97_BUS
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
driver. Selecting this option will allow these drivers to be built
without an explicit machine driver for test and development purposes.
+ Support for the bus types used to access the codecs to be built must
+ be selected separately.
+
If unsure select "N".
+config SND_SOC_WM_HUBS
+ tristate
+ default y if SND_SOC_WM8993=y
+ default m if SND_SOC_WM8993=m
config SND_SOC_AC97_CODEC
tristate
select SND_AC97_CODEC
+config SND_SOC_AD1836
+ tristate
+
+config SND_SOC_AD1938
+ tristate
+
config SND_SOC_AD1980
tristate
config SND_SOC_AD73311
tristate
+
+config SND_SOC_ADS117X
+ tristate
+
+config SND_SOC_AK4104
+ tristate
config SND_SOC_AK4535
tristate
+config SND_SOC_AK4642
+ tristate
+
+config SND_SOC_AK4671
+ tristate
+
# Cirrus Logic CS4270 Codec
config SND_SOC_CS4270
tristate
-# Cirrus Logic CS4270 Codec Hardware Mute Support
-# Select if you have external muting circuitry attached to your CS4270.
-config SND_SOC_CS4270_HWMUTE
- bool
- depends on SND_SOC_CS4270
-
# Cirrus Logic CS4270 Codec VD = 3.3V Errata
# Select if you are affected by the errata where the part will not function
# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
bool
depends on SND_SOC_CS4270
+config SND_SOC_CX20442
+ tristate
+
+config SND_SOC_L3
+ tristate
+
+config SND_SOC_PCM3008
+ tristate
+
+config SND_SOC_SPDIF
+ tristate
+
config SND_SOC_SSM2602
tristate
+config SND_SOC_STAC9766
+ tristate
+
config SND_SOC_TLV320AIC23
tristate
- depends on I2C
config SND_SOC_TLV320AIC26
tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
config SND_SOC_TLV320AIC3X
tristate
- depends on I2C
+
+config SND_SOC_TLV320DAC33
+ tristate
+
+config SND_SOC_TWL4030
+ select TWL4030_CODEC
+ tristate
+
+config SND_SOC_UDA134X
+ tristate
config SND_SOC_UDA1380
tristate
+config SND_SOC_WM8350
+ tristate
+
+config SND_SOC_WM8400
+ tristate
+
config SND_SOC_WM8510
tristate
+config SND_SOC_WM8523
+ tristate
+
config SND_SOC_WM8580
tristate
+config SND_SOC_WM8711
+ tristate
+
+config SND_SOC_WM8727
+ tristate
+
+config SND_SOC_WM8728
+ tristate
+
config SND_SOC_WM8731
tristate
config SND_SOC_WM8753
tristate
+config SND_SOC_WM8776
+ tristate
+
config SND_SOC_WM8900
tristate
config SND_SOC_WM8903
tristate
+config SND_SOC_WM8940
+ tristate
+
+config SND_SOC_WM8960
+ tristate
+
+config SND_SOC_WM8961
+ tristate
+
config SND_SOC_WM8971
tristate
+config SND_SOC_WM8974
+ tristate
+
+config SND_SOC_WM8988
+ tristate
+
config SND_SOC_WM8990
tristate
+config SND_SOC_WM8993
+ tristate
+
+config SND_SOC_WM9081
+ tristate
+
+config SND_SOC_WM9705
+ tristate
+
config SND_SOC_WM9712
tristate
config SND_SOC_WM9713
tristate
+
+# Amp
+config SND_SOC_MAX9877
+ tristate
+
+config SND_SOC_TPA6130A2
+ tristate
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff