/*
* Driver for ESS Solo-1 (ES1938, ES1946, ES1969) soundcard
* Copyright (c) by Jaromir Koutek <miri@punknet.cz>,
- * Jaroslav Kysela <perex@suse.cz>,
+ * Jaroslav Kysela <perex@perex.cz>,
* Thomas Sailer <sailer@ife.ee.ethz.ch>,
* Abramo Bagnara <abramo@alsa-project.org>,
* Markus Gruber <gruber@eikon.tum.de>
*/
-#include <sound/driver.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <sound/opl3.h>
#include <sound/mpu401.h>
#include <sound/initval.h>
+#include <sound/tlv.h>
#include <asm/io.h>
unsigned int dma2_start;
unsigned int dma1_shift;
unsigned int dma2_shift;
+ unsigned int last_capture_dmaaddr;
unsigned int active;
spinlock_t reg_lock;
#endif
};
-static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id);
static struct pci_device_id snd_es1938_ids[] = {
{ 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Solo-1 */
outb(1, SLDM_REG(chip, DMAMASK));
outb(0x14, SLDM_REG(chip, DMAMODE));
outl(chip->dma1_start, SLDM_REG(chip, DMAADDR));
+ chip->last_capture_dmaaddr = chip->dma1_start;
outw(chip->dma1_size - 1, SLDM_REG(chip, DMACOUNT));
/* 3. Unmask DMA */
outb(0, SLDM_REG(chip, DMAMASK));
return -EINVAL;
}
+/* during the incrementing of dma counters the DMA register reads sometimes
+ returns garbage. To ensure a valid hw pointer, the following checks which
+ should be very unlikely to fail are used:
+ - is the current DMA address in the valid DMA range ?
+ - is the sum of DMA address and DMA counter pointing to the last DMA byte ?
+ One can argue this could differ by one byte depending on which register is
+ updated first, so the implementation below allows for that.
+*/
static snd_pcm_uframes_t snd_es1938_capture_pointer(struct snd_pcm_substream *substream)
{
struct es1938 *chip = snd_pcm_substream_chip(substream);
size_t ptr;
+#if 0
size_t old, new;
-#if 1
/* This stuff is *needed*, don't ask why - AB */
old = inw(SLDM_REG(chip, DMACOUNT));
while ((new = inw(SLDM_REG(chip, DMACOUNT))) != old)
old = new;
ptr = chip->dma1_size - 1 - new;
#else
- ptr = inl(SLDM_REG(chip, DMAADDR)) - chip->dma1_start;
+ size_t count;
+ unsigned int diff;
+
+ ptr = inl(SLDM_REG(chip, DMAADDR));
+ count = inw(SLDM_REG(chip, DMACOUNT));
+ diff = chip->dma1_start + chip->dma1_size - ptr - count;
+
+ if (diff > 3 || ptr < chip->dma1_start
+ || ptr >= chip->dma1_start+chip->dma1_size)
+ ptr = chip->last_capture_dmaaddr; /* bad, use last saved */
+ else
+ chip->last_capture_dmaaddr = ptr; /* good, remember it */
+
+ ptr -= chip->dma1_start;
#endif
return ptr >> chip->dma1_shift;
}
struct es1938 *chip = snd_pcm_substream_chip(substream);
pos <<= chip->dma1_shift;
count <<= chip->dma1_shift;
- snd_assert(pos + count <= chip->dma1_size, return -EINVAL);
+ if (snd_BUG_ON(pos + count > chip->dma1_size))
+ return -EINVAL;
if (pos + count < chip->dma1_size) {
if (copy_to_user(dst, runtime->dma_area + pos + 1, count))
return -EFAULT;
return snd_es1938_mixer_bits(chip, 0x1c, 0x07, val) != val;
}
-static int snd_es1938_info_spatializer_enable(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- return 0;
-}
+#define snd_es1938_info_spatializer_enable snd_ctl_boolean_mono_info
static int snd_es1938_get_spatializer_enable(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
return 0;
}
-static int snd_es1938_info_hw_switch(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
- uinfo->count = 2;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- return 0;
-}
+#define snd_es1938_info_hw_switch snd_ctl_boolean_stereo_info
static int snd_es1938_get_hw_switch(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
return snd_es1938_read(chip, reg);
}
+#define ES1938_SINGLE_TLV(xname, xindex, reg, shift, mask, invert, xtlv) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,\
+ .name = xname, .index = xindex, \
+ .info = snd_es1938_info_single, \
+ .get = snd_es1938_get_single, .put = snd_es1938_put_single, \
+ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24), \
+ .tlv = { .p = xtlv } }
#define ES1938_SINGLE(xname, xindex, reg, shift, mask, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
.info = snd_es1938_info_single, \
return snd_es1938_reg_bits(chip, reg, mask, val) != val;
}
+#define ES1938_DOUBLE_TLV(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert, xtlv) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,\
+ .name = xname, .index = xindex, \
+ .info = snd_es1938_info_double, \
+ .get = snd_es1938_get_double, .put = snd_es1938_put_double, \
+ .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22), \
+ .tlv = { .p = xtlv } }
#define ES1938_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
.info = snd_es1938_info_double, \
return change;
}
+static unsigned int db_scale_master[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 54, TLV_DB_SCALE_ITEM(-3600, 50, 1),
+ 54, 63, TLV_DB_SCALE_ITEM(-900, 100, 0),
+};
+
+static unsigned int db_scale_audio1[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 8, TLV_DB_SCALE_ITEM(-3300, 300, 1),
+ 8, 15, TLV_DB_SCALE_ITEM(-900, 150, 0),
+};
+
+static unsigned int db_scale_audio2[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 8, TLV_DB_SCALE_ITEM(-3450, 300, 1),
+ 8, 15, TLV_DB_SCALE_ITEM(-1050, 150, 0),
+};
+
+static unsigned int db_scale_mic[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 8, TLV_DB_SCALE_ITEM(-2400, 300, 1),
+ 8, 15, TLV_DB_SCALE_ITEM(0, 150, 0),
+};
+
+static unsigned int db_scale_line[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 8, TLV_DB_SCALE_ITEM(-3150, 300, 1),
+ 8, 15, TLV_DB_SCALE_ITEM(-750, 150, 0),
+};
+
+static const DECLARE_TLV_DB_SCALE(db_scale_capture, 0, 150, 0);
+
static struct snd_kcontrol_new snd_es1938_controls[] = {
-ES1938_DOUBLE("Master Playback Volume", 0, 0x60, 0x62, 0, 0, 63, 0),
+ES1938_DOUBLE_TLV("Master Playback Volume", 0, 0x60, 0x62, 0, 0, 63, 0,
+ db_scale_master),
ES1938_DOUBLE("Master Playback Switch", 0, 0x60, 0x62, 6, 6, 1, 1),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = (SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ),
.name = "Hardware Master Playback Switch",
- .access = SNDRV_CTL_ELEM_ACCESS_READ,
.info = snd_es1938_info_hw_switch,
.get = snd_es1938_get_hw_switch,
+ .tlv = { .p = db_scale_master },
},
ES1938_SINGLE("Hardware Volume Split", 0, 0x64, 7, 1, 0),
-ES1938_DOUBLE("Line Playback Volume", 0, 0x3e, 0x3e, 4, 0, 15, 0),
+ES1938_DOUBLE_TLV("Line Playback Volume", 0, 0x3e, 0x3e, 4, 0, 15, 0,
+ db_scale_line),
ES1938_DOUBLE("CD Playback Volume", 0, 0x38, 0x38, 4, 0, 15, 0),
-ES1938_DOUBLE("FM Playback Volume", 0, 0x36, 0x36, 4, 0, 15, 0),
-ES1938_DOUBLE("Mono Playback Volume", 0, 0x6d, 0x6d, 4, 0, 15, 0),
-ES1938_DOUBLE("Mic Playback Volume", 0, 0x1a, 0x1a, 4, 0, 15, 0),
-ES1938_DOUBLE("Aux Playback Volume", 0, 0x3a, 0x3a, 4, 0, 15, 0),
-ES1938_DOUBLE("Capture Volume", 0, 0xb4, 0xb4, 4, 0, 15, 0),
+ES1938_DOUBLE_TLV("FM Playback Volume", 0, 0x36, 0x36, 4, 0, 15, 0,
+ db_scale_mic),
+ES1938_DOUBLE_TLV("Mono Playback Volume", 0, 0x6d, 0x6d, 4, 0, 15, 0,
+ db_scale_line),
+ES1938_DOUBLE_TLV("Mic Playback Volume", 0, 0x1a, 0x1a, 4, 0, 15, 0,
+ db_scale_mic),
+ES1938_DOUBLE_TLV("Aux Playback Volume", 0, 0x3a, 0x3a, 4, 0, 15, 0,
+ db_scale_line),
+ES1938_DOUBLE_TLV("Capture Volume", 0, 0xb4, 0xb4, 4, 0, 15, 0,
+ db_scale_capture),
ES1938_SINGLE("PC Speaker Volume", 0, 0x3c, 0, 7, 0),
ES1938_SINGLE("Record Monitor", 0, 0xa8, 3, 1, 0),
ES1938_SINGLE("Capture Switch", 0, 0x1c, 4, 1, 1),
.get = snd_es1938_get_mux,
.put = snd_es1938_put_mux,
},
-ES1938_DOUBLE("Mono Input Playback Volume", 0, 0x6d, 0x6d, 4, 0, 15, 0),
-ES1938_DOUBLE("PCM Capture Volume", 0, 0x69, 0x69, 4, 0, 15, 0),
-ES1938_DOUBLE("Mic Capture Volume", 0, 0x68, 0x68, 4, 0, 15, 0),
-ES1938_DOUBLE("Line Capture Volume", 0, 0x6e, 0x6e, 4, 0, 15, 0),
-ES1938_DOUBLE("FM Capture Volume", 0, 0x6b, 0x6b, 4, 0, 15, 0),
-ES1938_DOUBLE("Mono Capture Volume", 0, 0x6f, 0x6f, 4, 0, 15, 0),
-ES1938_DOUBLE("CD Capture Volume", 0, 0x6a, 0x6a, 4, 0, 15, 0),
-ES1938_DOUBLE("Aux Capture Volume", 0, 0x6c, 0x6c, 4, 0, 15, 0),
-ES1938_DOUBLE("PCM Playback Volume", 0, 0x7c, 0x7c, 4, 0, 15, 0),
-ES1938_DOUBLE("PCM Playback Volume", 1, 0x14, 0x14, 4, 0, 15, 0),
+ES1938_DOUBLE_TLV("Mono Input Playback Volume", 0, 0x6d, 0x6d, 4, 0, 15, 0,
+ db_scale_line),
+ES1938_DOUBLE_TLV("PCM Capture Volume", 0, 0x69, 0x69, 4, 0, 15, 0,
+ db_scale_audio2),
+ES1938_DOUBLE_TLV("Mic Capture Volume", 0, 0x68, 0x68, 4, 0, 15, 0,
+ db_scale_mic),
+ES1938_DOUBLE_TLV("Line Capture Volume", 0, 0x6e, 0x6e, 4, 0, 15, 0,
+ db_scale_line),
+ES1938_DOUBLE_TLV("FM Capture Volume", 0, 0x6b, 0x6b, 4, 0, 15, 0,
+ db_scale_mic),
+ES1938_DOUBLE_TLV("Mono Capture Volume", 0, 0x6f, 0x6f, 4, 0, 15, 0,
+ db_scale_line),
+ES1938_DOUBLE_TLV("CD Capture Volume", 0, 0x6a, 0x6a, 4, 0, 15, 0,
+ db_scale_line),
+ES1938_DOUBLE_TLV("Aux Capture Volume", 0, 0x6c, 0x6c, 4, 0, 15, 0,
+ db_scale_line),
+ES1938_DOUBLE_TLV("PCM Playback Volume", 0, 0x7c, 0x7c, 4, 0, 15, 0,
+ db_scale_audio2),
+ES1938_DOUBLE_TLV("PCM Playback Volume", 1, 0x14, 0x14, 4, 0, 15, 0,
+ db_scale_audio1),
ES1938_SINGLE("3D Control - Level", 0, 0x52, 0, 63, 0),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
*d = snd_es1938_reg_read(chip, *s);
outb(0x00, SLIO_REG(chip, IRQCONTROL)); /* disable irqs */
- if (chip->irq >= 0)
+ if (chip->irq >= 0) {
free_irq(chip->irq, chip);
+ chip->irq = -1;
+ }
pci_disable_device(pci);
pci_save_state(pci);
+ pci_set_power_state(pci, pci_choose_state(pci, state));
return 0;
}
struct es1938 *chip = card->private_data;
unsigned char *s, *d;
+ pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
- pci_enable_device(pci);
- request_irq(pci->irq, snd_es1938_interrupt,
- SA_INTERRUPT|SA_SHIRQ, "ES1938", chip);
+ if (pci_enable_device(pci) < 0) {
+ printk(KERN_ERR "es1938: pci_enable_device failed, "
+ "disabling device\n");
+ snd_card_disconnect(card);
+ return -EIO;
+ }
+
+ if (request_irq(pci->irq, snd_es1938_interrupt,
+ IRQF_SHARED, "ES1938", chip)) {
+ printk(KERN_ERR "es1938: unable to grab IRQ %d, "
+ "disabling device\n", pci->irq);
+ snd_card_disconnect(card);
+ return -EIO;
+ }
chip->irq = pci->irq;
snd_es1938_chip_init(chip);
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(24)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(24)) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
spin_lock_init(&chip->mixer_lock);
chip->card = card;
chip->pci = pci;
+ chip->irq = -1;
if ((err = pci_request_regions(pci, "ESS Solo-1")) < 0) {
kfree(chip);
pci_disable_device(pci);
chip->vc_port = pci_resource_start(pci, 2);
chip->mpu_port = pci_resource_start(pci, 3);
chip->game_port = pci_resource_start(pci, 4);
- if (request_irq(pci->irq, snd_es1938_interrupt, SA_INTERRUPT|SA_SHIRQ,
+ if (request_irq(pci->irq, snd_es1938_interrupt, IRQF_SHARED,
"ES1938", chip)) {
snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
snd_es1938_free(chip);
/* --------------------------------------------------------------------
* Interrupt handler
* -------------------------------------------------------------------- */
-static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id)
{
struct es1938 *chip = dev_id;
unsigned char status, audiostatus;
status = inb(SLIO_REG(chip, IRQCONTROL));
#if 0
- printk("Es1938debug - interrupt status: =0x%x\n", status);
+ printk(KERN_DEBUG "Es1938debug - interrupt status: =0x%x\n", status);
#endif
/* AUDIO 1 */
if (status & 0x10) {
#if 0
- printk("Es1938debug - AUDIO channel 1 interrupt\n");
- printk("Es1938debug - AUDIO channel 1 DMAC DMA count: %u\n",
+ printk(KERN_DEBUG
+ "Es1938debug - AUDIO channel 1 interrupt\n");
+ printk(KERN_DEBUG
+ "Es1938debug - AUDIO channel 1 DMAC DMA count: %u\n",
inw(SLDM_REG(chip, DMACOUNT)));
- printk("Es1938debug - AUDIO channel 1 DMAC DMA base: %u\n",
+ printk(KERN_DEBUG
+ "Es1938debug - AUDIO channel 1 DMAC DMA base: %u\n",
inl(SLDM_REG(chip, DMAADDR)));
- printk("Es1938debug - AUDIO channel 1 DMAC DMA status: 0x%x\n",
+ printk(KERN_DEBUG
+ "Es1938debug - AUDIO channel 1 DMAC DMA status: 0x%x\n",
inl(SLDM_REG(chip, DMASTATUS)));
#endif
/* clear irq */
/* AUDIO 2 */
if (status & 0x20) {
#if 0
- printk("Es1938debug - AUDIO channel 2 interrupt\n");
- printk("Es1938debug - AUDIO channel 2 DMAC DMA count: %u\n",
+ printk(KERN_DEBUG
+ "Es1938debug - AUDIO channel 2 interrupt\n");
+ printk(KERN_DEBUG
+ "Es1938debug - AUDIO channel 2 DMAC DMA count: %u\n",
inw(SLIO_REG(chip, AUDIO2DMACOUNT)));
- printk("Es1938debug - AUDIO channel 2 DMAC DMA base: %u\n",
+ printk(KERN_DEBUG
+ "Es1938debug - AUDIO channel 2 DMAC DMA base: %u\n",
inl(SLIO_REG(chip, AUDIO2DMAADDR)));
#endif
// snd_es1938_mixer_bits(chip, ESSSB_IREG_MPU401CONTROL, 0x40, 0); /* ack? */
if (chip->rmidi) {
handled = 1;
- snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data, regs);
+ snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data);
}
}
return IRQ_RETVAL(handled);
return -ENOENT;
}
- card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
- if (card == NULL)
- return -ENOMEM;
+ err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+ if (err < 0)
+ return err;
for (idx = 0; idx < 5; idx++) {
if (pci_resource_start(pci, idx) == 0 ||
!(pci_resource_flags(pci, idx) & IORESOURCE_IO)) {
}
}
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- chip->mpu_port, 1, chip->irq, 0, &chip->rmidi) < 0) {
+ chip->mpu_port, MPU401_INFO_INTEGRATED,
+ chip->irq, 0, &chip->rmidi) < 0) {
printk(KERN_ERR "es1938: unable to initialize MPU-401\n");
} else {
// this line is vital for MIDI interrupt handling on ess-solo1
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff