config SND_AZT3328
- tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Aztech AZF3328 / PCI168"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
+ select SND_RAWMIDI
help
Say Y here to include support for Aztech AZF3328 (PCI168)
soundcards.
* AuzenTech X-Meridian
* Bgears b-Enspirer
* Club3D Theatron DTS
- * HT-Omega Claro
+ * HT-Omega Claro (plus)
+ * HT-Omega Claro halo (XT)
* Razer Barracuda AC-1
* Sondigo Inferno
To compile this driver as a module, choose M here: the module
will be called snd-cs5535audio.
+config SND_CTXFI
+ tristate "Creative Sound Blaster X-Fi"
+ select SND_PCM
+ help
+ If you want to use soundcards based on Creative Sound Blastr X-Fi
+ boards with 20k1 or 20k2 chips, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ctxfi.
+
config SND_DARLA20
tristate "(Echoaudio) Darla20"
select FW_LOADER
To compile this driver as a module, choose M here: the module
will be called snd-indigodj
+config SND_INDIGOIOX
+ tristate "(Echoaudio) Indigo IOx"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo IOx.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigoiox
+
+config SND_INDIGODJX
+ tristate "(Echoaudio) Indigo DJx"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo DJx.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigodjx
+
config SND_EMU10K1
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
select FW_LOADER
config SND_FM801_TEA575X_BOOL
bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
- depends on VIDEO_V4L1=y || VIDEO_V4L1=SND_FM801
+ depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
depends on SND_FM801_TEA575X_BOOL
default SND_FM801
-config SND_HDA_INTEL
- tristate "Intel HD Audio"
- select SND_PCM
- select SND_VMASTER
- help
- Say Y here to include support for Intel "High Definition
- Audio" (Azalia) motherboard devices.
-
- To compile this driver as a module, choose M here: the module
- will be called snd-hda-intel.
-
-config SND_HDA_HWDEP
- bool "Build hwdep interface for HD-audio driver"
- depends on SND_HDA_INTEL
- select SND_HWDEP
- help
- Say Y here to build a hwdep interface for HD-audio driver.
- This interface can be used for out-of-band communication
- with codecs for debugging purposes.
-
-config SND_HDA_CODEC_REALTEK
- bool "Build Realtek HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Realtek HD-audio codec support in
- snd-hda-intel driver, such as ALC880.
-
-config SND_HDA_CODEC_ANALOG
- bool "Build Analog Device HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Analog Device HD-audio codec support in
- snd-hda-intel driver, such as AD1986A.
-
-config SND_HDA_CODEC_SIGMATEL
- bool "Build IDT/Sigmatel HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include IDT (Sigmatel) HD-audio codec support in
- snd-hda-intel driver, such as STAC9200.
-
-config SND_HDA_CODEC_VIA
- bool "Build VIA HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include VIA HD-audio codec support in
- snd-hda-intel driver, such as VT1708.
-
-config SND_HDA_CODEC_ATIHDMI
- bool "Build ATI HDMI HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include ATI HDMI HD-audio codec support in
- snd-hda-intel driver, such as ATI RS600 HDMI.
-
-config SND_HDA_CODEC_CONEXANT
- bool "Build Conexant HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Conexant HD-audio codec support in
- snd-hda-intel driver, such as CX20549.
-
-config SND_HDA_CODEC_CMEDIA
- bool "Build C-Media HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include C-Media HD-audio codec support in
- snd-hda-intel driver, such as CMI9880.
-
-config SND_HDA_CODEC_SI3054
- bool "Build Silicon Labs 3054 HD-modem codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Silicon Labs 3054 HD-modem codec
- (and compatibles) support in snd-hda-intel driver.
-
-config SND_HDA_GENERIC
- bool "Enable generic HD-audio codec parser"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to enable the generic HD-audio codec parser
- in snd-hda-intel driver.
-
-config SND_HDA_POWER_SAVE
- bool "Aggressive power-saving on HD-audio"
- depends on SND_HDA_INTEL && EXPERIMENTAL
- help
- Say Y here to enable more aggressive power-saving mode on
- HD-audio driver. The power-saving timeout can be configured
- via power_save option or over sysfs on-the-fly.
-
-config SND_HDA_POWER_SAVE_DEFAULT
- int "Default time-out for HD-audio power-save mode"
- depends on SND_HDA_POWER_SAVE
- default 0
- help
- The default time-out value in seconds for HD-audio automatic
- power-save mode. 0 means to disable the power-save mode.
+source "sound/pci/hda/Kconfig"
config SND_HDSP
tristate "RME Hammerfall DSP Audio"
To compile this driver as a module, choose M here: the module
will be called snd-hdsp.
+comment "Don't forget to add built-in firmwares for HDSP driver"
+ depends on SND_HDSP=y
+
config SND_HDSPM
tristate "RME Hammerfall DSP MADI"
select SND_HWDEP
Currently supported hardware is: M-Audio Delta 1010(LT),
DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;
- TerraTec EWX 24/96, EWS 88MT, 88D, DMX 6Fire, Phase 88;
- Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8.
+ TerraTec EWX 24/96, EWS 88MT/D, DMX 6Fire, Phase 88;
+ Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8;
+ Lionstracs Mediastation, Terrasoniq TS 88.
To compile this driver as a module, choose M here: the module
will be called snd-ice1712.
ICE/VT1724/1720 (Envy24HT/PT) chips.
Currently supported hardware is: AMP AUDIO2000; M-Audio
- Revolution 7.1; TerraTec Aureon 5.1 Sky, 7.1 Space/Universe;
- AudioTrak Prodigy 7.1; Pontis MS300; Albatron K8X800 Pro II;
- Chaintech ZNF3-150/250.
+ Revolution 5.1, 7.1, Audiophile 192; TerraTec Aureon 5.1 Sky,
+ 7.1 Space/Universe, Phase 22/28; Onkyo SE-90PCI, SE-200PCI;
+ AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules
+ Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal
+ 192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS,
+ AV-710; Shuttle SN25P.
To compile this driver as a module, choose M here: the module
will be called snd-ice1724.
config SND_KORG1212
tristate "Korg 1212 IO"
- select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL
select SND_PCM
help
Say Y here to include support for Korg 1212IO soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-korg1212.
-config SND_KORG1212_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for Korg1212 driver"
- depends on SND_KORG1212
- default y
+config SND_LX6464ES
+ tristate "Digigram LX6464ES"
+ select SND_PCM
help
- Say Y here to include the static firmware built in the kernel
- for the Korg1212 driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
+ Say Y here to include support for Digigram LX6464ES boards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-lx6464es.
+
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
- select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro 3
To compile this driver as a module, choose M here: the module
will be called snd-maestro3.
-config SND_MAESTRO3_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for Maestro3 driver"
- depends on SND_MAESTRO3
- default y
- help
- Say Y here to include the static firmware built in the kernel
- for the Maestro3 driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
-
config SND_MIXART
tristate "Digigram miXart"
select SND_HWDEP
select SND_OXYGEN_LIB
help
Say Y here to include support for sound cards based on the
- Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+ Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X,
+ Essence ST (Deluxe), and Essence STX.
+ Support for the HDAV1.3 (Deluxe) is very experimental.
To compile this driver as a module, choose M here: the module
will be called snd-virtuoso.
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
- select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-ymfpci.
-config SND_YMFPCI_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for YMFPCI driver"
- depends on SND_YMFPCI
- default y
- help
- Say Y here to include the static firmware built in the kernel
- for the YMFPCI driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
-
-config SND_AC97_POWER_SAVE
- bool "AC97 Power-Saving Mode"
- depends on SND_AC97_CODEC && EXPERIMENTAL
- default n
- help
- Say Y here to enable the aggressive power-saving support of
- AC97 codecs. In this mode, the power-mode is dynamically
- controlled at each open/close.
-
- The mode is activated by passing power_save=1 option to
- snd-ac97-codec driver. You can toggle it dynamically over
- sysfs, too.
-
-config SND_AC97_POWER_SAVE_DEFAULT
- int "Default time-out for AC97 power-save mode"
- depends on SND_AC97_POWER_SAVE
- default 0
- help
- The default time-out value in seconds for AC97 automatic
- power-save mode. 0 means to disable the power-save mode.
-
endif # SND_PCI