# ALSA PCI drivers
-menu "PCI devices"
- depends on SND!=n && PCI
+menuconfig SND_PCI
+ bool "PCI sound devices"
+ depends on PCI
+ default y
+ help
+ Support for sound devices connected via the PCI bus.
+
+if SND_PCI
config SND_AD1889
tristate "Analog Devices AD1889"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
config SND_ALS300
tristate "Avance Logic ALS300/ALS300+"
- depends on SND
select SND_PCM
select SND_AC97_CODEC
select SND_OPL3_LIB
config SND_ALS4000
tristate "Avance Logic ALS4000"
- depends on SND && ISA_DMA_API
+ depends on ISA_DMA_API
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
config SND_ALI5451
tristate "ALi M5451 PCI Audio Controller"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
config SND_ATIIXP
tristate "ATI IXP AC97 Controller"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
config SND_ATIIXP_MODEM
tristate "ATI IXP Modem"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
config SND_AU8810
tristate "Aureal Advantage"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
config SND_AU8820
tristate "Aureal Vortex"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
config SND_AU8830
tristate "Aureal Vortex 2"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
To compile this driver as a module, choose M here: the module
will be called snd-au8830.
+config SND_AW2
+ tristate "Emagic Audiowerk 2"
+ help
+ Say Y here to include support for Emagic Audiowerk 2 soundcards.
+
+ Supported features: Analog and SPDIF output. Analog or SPDIF input.
+ Note: Switch between analog and digital input does not always work.
+ It can produce continuous noise. The workaround is to switch again
+ (and again) between digital and analog input until it works.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-aw2.
+
+
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
- depends on SND && EXPERIMENTAL
+ depends on EXPERIMENTAL
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
config SND_BT87X
tristate "Bt87x Audio Capture"
- depends on SND
select SND_PCM
help
If you want to record audio from TV cards based on
config SND_CA0106
tristate "SB Audigy LS / Live 24bit"
- depends on SND
select SND_AC97_CODEC
select SND_RAWMIDI
+ select SND_VMASTER
help
Say Y here to include support for the Sound Blaster Audigy LS
and Live 24bit.
config SND_CMIPCI
tristate "C-Media 8338, 8738, 8768, 8770"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
To compile this driver as a module, choose M here: the module
will be called snd-cmipci.
+config SND_OXYGEN_LIB
+ tristate
+ select SND_PCM
+ select SND_MPU401_UART
+
+config SND_OXYGEN
+ tristate "C-Media 8788 (Oxygen)"
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ C-Media CMI8788 (Oxygen HD Audio) chip:
+ * Asound A-8788
+ * AuzenTech X-Meridian
+ * Bgears b-Enspirer
+ * Club3D Theatron DTS
+ * HT-Omega Claro (plus)
+ * HT-Omega Claro halo (XT)
+ * Razer Barracuda AC-1
+ * Sondigo Inferno
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-oxygen.
+
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
- depends on SND
select SND_OPL3_LIB
select SND_RAWMIDI
select SND_AC97_CODEC
config SND_CS46XX
tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
- depends on SND
select SND_RAWMIDI
select SND_AC97_CODEC
help
config SND_CS5530
tristate "CS5530 Audio"
- depends on SND && ISA_DMA_API
+ depends on ISA_DMA_API
select SND_SB16_DSP
help
Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
config SND_CS5535AUDIO
tristate "CS5535/CS5536 Audio"
- depends on SND && X86 && !X86_64
+ depends on X86 && !X86_64
select SND_PCM
select SND_AC97_CODEC
help
config SND_DARLA20
tristate "(Echoaudio) Darla20"
- depends on SND
select FW_LOADER
select SND_PCM
help
config SND_GINA20
tristate "(Echoaudio) Gina20"
- depends on SND
select FW_LOADER
select SND_PCM
help
config SND_LAYLA20
tristate "(Echoaudio) Layla20"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
config SND_DARLA24
tristate "(Echoaudio) Darla24"
- depends on SND
select FW_LOADER
select SND_PCM
help
config SND_GINA24
tristate "(Echoaudio) Gina24"
- depends on SND
select FW_LOADER
select SND_PCM
help
config SND_LAYLA24
tristate "(Echoaudio) Layla24"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
config SND_MONA
tristate "(Echoaudio) Mona"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
config SND_MIA
tristate "(Echoaudio) Mia"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
config SND_ECHO3G
tristate "(Echoaudio) 3G cards"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
config SND_INDIGO
tristate "(Echoaudio) Indigo"
- depends on SND
select FW_LOADER
select SND_PCM
help
config SND_INDIGOIO
tristate "(Echoaudio) Indigo IO"
- depends on SND
select FW_LOADER
select SND_PCM
help
config SND_INDIGODJ
tristate "(Echoaudio) Indigo DJ"
- depends on SND
select FW_LOADER
select SND_PCM
help
config SND_EMU10K1
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
- depends on SND
select FW_LOADER
select SND_HWDEP
select SND_RAWMIDI
config SND_EMU10K1X
tristate "Emu10k1X (Dell OEM Version)"
- depends on SND
select SND_AC97_CODEC
select SND_RAWMIDI
help
config SND_ENS1370
tristate "(Creative) Ensoniq AudioPCI 1370"
- depends on SND
select SND_RAWMIDI
select SND_PCM
help
config SND_ENS1371
tristate "(Creative) Ensoniq AudioPCI 1371/1373"
- depends on SND
select SND_RAWMIDI
select SND_AC97_CODEC
help
config SND_ES1938
tristate "ESS ES1938/1946/1969 (Solo-1)"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
config SND_ES1968
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
config SND_FM801
tristate "ForteMedia FM801"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
config SND_FM801_TEA575X_BOOL
bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
+ depends on VIDEO_V4L1=y || VIDEO_V4L1=SND_FM801
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
Forte SF256-PCS-02) into the snd-fm801 driver.
- This will enable support for the old V4L1 API.
-
config SND_FM801_TEA575X
tristate
depends on SND_FM801_TEA575X_BOOL
default SND_FM801
- select VIDEO_V4L1
- select VIDEO_DEV
-
-config SND_HDA_INTEL
- tristate "Intel HD Audio"
- depends on SND
- select SND_PCM
- help
- Say Y here to include support for Intel "High Definition
- Audio" (Azalia) motherboard devices.
- To compile this driver as a module, choose M here: the module
- will be called snd-hda-intel.
-
-config SND_HDA_HWDEP
- bool "Build hwdep interface for HD-audio driver"
- depends on SND_HDA_INTEL
- select SND_HWDEP
- help
- Say Y here to build a hwdep interface for HD-audio driver.
- This interface can be used for out-of-band communication
- with codecs for debugging purposes.
-
-config SND_HDA_CODEC_REALTEK
- bool "Build Realtek HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Realtek HD-audio codec support in
- snd-hda-intel driver, such as ALC880.
-
-config SND_HDA_CODEC_ANALOG
- bool "Build Analog Device HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Analog Device HD-audio codec support in
- snd-hda-intel driver, such as AD1986A.
-
-config SND_HDA_CODEC_SIGMATEL
- bool "Build IDT/Sigmatel HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include IDT (Sigmatel) HD-audio codec support in
- snd-hda-intel driver, such as STAC9200.
-
-config SND_HDA_CODEC_VIA
- bool "Build VIA HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include VIA HD-audio codec support in
- snd-hda-intel driver, such as VT1708.
-
-config SND_HDA_CODEC_ATIHDMI
- bool "Build ATI HDMI HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include ATI HDMI HD-audio codec support in
- snd-hda-intel driver, such as ATI RS600 HDMI.
-
-config SND_HDA_CODEC_CONEXANT
- bool "Build Conexant HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Conexant HD-audio codec support in
- snd-hda-intel driver, such as CX20549.
-
-config SND_HDA_CODEC_CMEDIA
- bool "Build C-Media HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include C-Media HD-audio codec support in
- snd-hda-intel driver, such as CMI9880.
-
-config SND_HDA_CODEC_SI3054
- bool "Build Silicon Labs 3054 HD-modem codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Silicon Labs 3054 HD-modem codec
- (and compatibles) support in snd-hda-intel driver.
-
-config SND_HDA_GENERIC
- bool "Enable generic HD-audio codec parser"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to enable the generic HD-audio codec parser
- in snd-hda-intel driver.
-
-config SND_HDA_POWER_SAVE
- bool "Aggressive power-saving on HD-audio"
- depends on SND_HDA_INTEL && EXPERIMENTAL
- help
- Say Y here to enable more aggressive power-saving mode on
- HD-audio driver. The power-saving timeout can be configured
- via power_save option or over sysfs on-the-fly.
-
-config SND_HDA_POWER_SAVE_DEFAULT
- int "Default time-out for HD-audio power-save mode"
- depends on SND_HDA_POWER_SAVE
- default 0
- help
- The default time-out value in seconds for HD-audio automatic
- power-save mode. 0 means to disable the power-save mode.
+source "sound/pci/hda/Kconfig"
config SND_HDSP
tristate "RME Hammerfall DSP Audio"
- depends on SND
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
config SND_HDSPM
tristate "RME Hammerfall DSP MADI"
- depends on SND
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
To compile this driver as a module, choose M here: the module
will be called snd-hdspm.
+config SND_HIFIER
+ tristate "TempoTec HiFier Fantasia"
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for the MediaTek/TempoTec HiFier
+ Fantasia sound card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hifier.
+
config SND_ICE1712
tristate "ICEnsemble ICE1712 (Envy24)"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
Currently supported hardware is: M-Audio Delta 1010(LT),
DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;
- TerraTec EWX 24/96, EWS 88MT, 88D, DMX 6Fire, Phase 88;
- Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8.
+ TerraTec EWX 24/96, EWS 88MT/D, DMX 6Fire, Phase 88;
+ Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8;
+ Lionstracs Mediastation, Terrasoniq TS 88.
To compile this driver as a module, choose M here: the module
will be called snd-ice1712.
config SND_ICE1724
tristate "ICE/VT1724/1720 (Envy24HT/PT)"
- depends on SND
- select SND_MPU401_UART
+ select SND_RAWMIDI
select SND_AC97_CODEC
+ select SND_VMASTER
help
Say Y here to include support for soundcards based on
ICE/VT1724/1720 (Envy24HT/PT) chips.
Currently supported hardware is: AMP AUDIO2000; M-Audio
- Revolution 7.1; TerraTec Aureon 5.1 Sky, 7.1 Space/Universe;
- AudioTrak Prodigy 7.1; Pontis MS300; Albatron K8X800 Pro II;
- Chaintech ZNF3-150/250.
+ Revolution 5.1, 7.1, Audiophile 192; TerraTec Aureon 5.1 Sky,
+ 7.1 Space/Universe, Phase 22/28; Onkyo SE-90PCI, SE-200PCI;
+ AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules
+ Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal
+ 192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS,
+ AV-710; Shuttle SN25P.
To compile this driver as a module, choose M here: the module
will be called snd-ice1724.
config SND_INTEL8X0
tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
config SND_INTEL8X0M
tristate "Intel/SiS/nVidia/AMD MC97 Modem"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
config SND_KORG1212
tristate "Korg 1212 IO"
- depends on SND
- select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL
select SND_PCM
help
Say Y here to include support for Korg 1212IO soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-korg1212.
-config SND_KORG1212_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for Korg1212 driver"
- depends on SND_KORG1212
- default y
- help
- Say Y here to include the static firmware built in the kernel
- for the Korg1212 driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
-
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
- depends on SND
- select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro 3
To compile this driver as a module, choose M here: the module
will be called snd-maestro3.
-config SND_MAESTRO3_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for Maestro3 driver"
- depends on SND_MAESTRO3
- default y
- help
- Say Y here to include the static firmware built in the kernel
- for the Maestro3 driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
-
config SND_MIXART
tristate "Digigram miXart"
- depends on SND
select SND_HWDEP
select SND_PCM
help
config SND_NM256
tristate "NeoMagic NM256AV/ZX"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for NeoMagic NM256AV/ZX chips.
config SND_PCXHR
tristate "Digigram PCXHR"
- depends on SND
select SND_PCM
select SND_HWDEP
help
config SND_RIPTIDE
tristate "Conexant Riptide"
- depends on SND
select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
config SND_RME32
tristate "RME Digi32, 32/8, 32 PRO"
- depends on SND
select SND_PCM
help
Say Y to include support for RME Digi32, Digi32 PRO and
config SND_RME96
tristate "RME Digi96, 96/8, 96/8 PRO"
- depends on SND
select SND_PCM
help
Say Y here to include support for RME Digi96, Digi96/8 and
config SND_RME9652
tristate "RME Digi9652 (Hammerfall)"
- depends on SND
select SND_PCM
help
Say Y here to include support for RME Hammerfall (RME
config SND_SIS7019
tristate "SiS 7019 Audio Accelerator"
- depends on SND && X86 && !X86_64
+ depends on X86 && !X86_64
select SND_AC97_CODEC
help
Say Y here to include support for the SiS 7019 Audio Accelerator.
config SND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
config SND_TRIDENT
tristate "Trident 4D-Wave DX/NX; SiS 7018"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
config SND_VIA82XX
tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
config SND_VIA82XX_MODEM
tristate "VIA 82C686A/B, 8233 based Modems"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
To compile this driver as a module, choose M here: the module
will be called snd-via82xx-modem.
+config SND_VIRTUOSO
+ tristate "Asus Virtuoso 100/200 (Xonar)"
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and
+ HDAV1.3 (Deluxe).
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-virtuoso.
+
config SND_VX222
tristate "Digigram VX222"
- depends on SND
select SND_VX_LIB
help
Say Y here to include support for Digigram VX222 soundcards.
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
- depends on SND
- select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-ymfpci.
-config SND_YMFPCI_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for YMFPCI driver"
- depends on SND_YMFPCI
- default y
- help
- Say Y here to include the static firmware built in the kernel
- for the YMFPCI driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
-
-config SND_AC97_POWER_SAVE
- bool "AC97 Power-Saving Mode"
- depends on SND_AC97_CODEC && EXPERIMENTAL
- default n
- help
- Say Y here to enable the aggressive power-saving support of
- AC97 codecs. In this mode, the power-mode is dynamically
- controlled at each open/close.
-
- The mode is activated by passing power_save=1 option to
- snd-ac97-codec driver. You can toggle it dynamically over
- sysfs, too.
-
-config SND_AC97_POWER_SAVE_DEFAULT
- int "Default time-out for AC97 power-save mode"
- depends on SND_AC97_POWER_SAVE
- default 0
- help
- The default time-out value in seconds for AC97 automatic
- power-save mode. 0 means to disable the power-save mode.
-
-endmenu
+endif # SND_PCI
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff