will be called snd-ad1889.
config SND_ALS300
- tristate "Avance Logic ALS300/ALS300+"
- depends on SND
- select SND_PCM
- select SND_AC97_CODEC
- select SND_OPL3_LIB
- help
- Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
+ tristate "Avance Logic ALS300/ALS300+"
+ depends on SND
+ select SND_PCM
+ select SND_AC97_CODEC
+ select SND_OPL3_LIB
+ help
+ Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
- To compile this driver as a module, choose M here: the module
- will be called snd-als300
+ To compile this driver as a module, choose M here: the module
+ will be called snd-als300
config SND_ALS4000
tristate "Avance Logic ALS4000"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
+ select SND_SB_COMMON
help
Say Y here to include support for soundcards based on Avance Logic
ALS4000 chips.
will be called snd-atiixp-modem.
config SND_AU8810
- tristate "Aureal Advantage"
- depends on SND
+ tristate "Aureal Advantage"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Advantage soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8810.
-
+
config SND_AU8820
- tristate "Aureal Vortex"
- depends on SND
+ tristate "Aureal Vortex"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex soundcards.
- Supported features: Hardware Mixer and SRC. For more info, email
- the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer and SRC. For more info, email
+ the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8820.
-
+
config SND_AU8830
- tristate "Aureal Vortex 2"
- depends on SND
+ tristate "Aureal Vortex 2"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex 2 soundcards.
- Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8830.
-
+
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
depends on SND && EXPERIMENTAL
will be called snd-azt3328.
config SND_BT87X
- tristate "Bt87x Audio Capture"
- depends on SND
+ tristate "Bt87x Audio Capture"
+ depends on SND
select SND_PCM
- help
+ help
If you want to record audio from TV cards based on
Brooktree Bt878/Bt879 chips, say Y here and read
<file:Documentation/sound/alsa/Bt87x.txt>.
will be called snd-ca0106.
config SND_CMIPCI
- tristate "C-Media 8738, 8338"
+ tristate "C-Media 8338, 8738, 8768, 8770"
depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
help
- If you want to use soundcards based on C-Media CMI8338 or CMI8738
- chips, say Y here and read
+ If you want to use soundcards based on C-Media CMI8338, CMI8738,
+ CMI8768 or CMI8770 chips, say Y here and read
<file:Documentation/sound/alsa/CMIPCI.txt>.
To compile this driver as a module, choose M here: the module
will be called snd-cmipci.
+config SND_OXYGEN_LIB
+ tristate
+ depends on SND
+ select SND_PCM
+ select SND_MPU401_UART
+
+config SND_OXYGEN
+ tristate "C-Media 8788 (Oxygen)"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ C-Media CMI8788 (Oxygen HD Audio) chip:
+ * Asound A-8788
+ * AuzenTech X-Meridian
+ * Bgears b-Enspirer
+ * Club3D Theatron DTS
+ * HT-Omega Claro
+ * Razer Barracuda AC-1
+ * Sondigo Inferno
+ * TempoTec HIFIER
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-oxygen.
+
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
depends on SND
config SND_CS46XX_NEW_DSP
bool "Cirrus Logic (Sound Fusion) New DSP support"
depends on SND_CS46XX
- default y
+ default y
help
Say Y here to use a new DSP image for SPDIF and dual codecs.
This works better than the old code, so say Y.
+config SND_CS5530
+ tristate "CS5530 Audio"
+ depends on SND && ISA_DMA_API
+ select SND_SB16_DSP
+ help
+ Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cs5530.
+
config SND_CS5535AUDIO
tristate "CS5535/CS5536 Audio"
depends on SND && X86 && !X86_64
referred to as NS CS5535 IO or AMD CS5535 IO companion in
various literature. This driver also supports the CS5536 audio
device. However, for both chips, on certain boards, you may
- need to use ac97_quirk=hp_only if your board has physically
+ need to use ac97_quirk=hp_only if your board has physically
mapped headphone out to master output. If that works for you,
send lspci -vvv output to the mailing list so that your board
can be identified in the quirks list.
To compile this driver as a module, choose M here: the module
will be called snd-cs5535audio.
+config SND_DARLA20
+ tristate "(Echoaudio) Darla20"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Darla.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-darla20
+
+config SND_GINA20
+ tristate "(Echoaudio) Gina20"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-gina20
+
+config SND_LAYLA20
+ tristate "(Echoaudio) Layla20"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Layla.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-layla20
+
+config SND_DARLA24
+ tristate "(Echoaudio) Darla24"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Darla24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-darla24
+
+config SND_GINA24
+ tristate "(Echoaudio) Gina24"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-gina24
+
+config SND_LAYLA24
+ tristate "(Echoaudio) Layla24"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Layla24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-layla24
+
+config SND_MONA
+ tristate "(Echoaudio) Mona"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Mona.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mona
+
+config SND_MIA
+ tristate "(Echoaudio) Mia"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mia
+
+config SND_ECHO3G
+ tristate "(Echoaudio) 3G cards"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-echo3g
+
+config SND_INDIGO
+ tristate "(Echoaudio) Indigo"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigo
+
+config SND_INDIGOIO
+ tristate "(Echoaudio) Indigo IO"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigoio
+
+config SND_INDIGODJ
+ tristate "(Echoaudio) Indigo DJ"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigodj
+
config SND_EMU10K1
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
depends on SND
+ select FW_LOADER
select SND_HWDEP
select SND_RAWMIDI
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-fm801.
-config SND_FM801_TEA575X
- tristate "ForteMedia FM801 + TEA5757 tuner"
+config SND_FM801_TEA575X_BOOL
+ bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
- select VIDEO_DEV
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
- Forte SF256-PCS-02).
+ Forte SF256-PCS-02) into the snd-fm801 driver.
- To compile this driver as a module, choose M here: the module
- will be called snd-fm801-tea575x.
+ This will enable support for the old V4L1 API.
+
+config SND_FM801_TEA575X
+ tristate
+ depends on SND_FM801_TEA575X_BOOL
+ default SND_FM801
+ select VIDEO_V4L1
+ select VIDEO_DEV
config SND_HDA_INTEL
tristate "Intel HD Audio"
To compile this driver as a module, choose M here: the module
will be called snd-hda-intel.
+config SND_HDA_HWDEP
+ bool "Build hwdep interface for HD-audio driver"
+ depends on SND_HDA_INTEL
+ select SND_HWDEP
+ help
+ Say Y here to build a hwdep interface for HD-audio driver.
+ This interface can be used for out-of-band communication
+ with codecs for debugging purposes.
+
+config SND_HDA_CODEC_REALTEK
+ bool "Build Realtek HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Realtek HD-audio codec support in
+ snd-hda-intel driver, such as ALC880.
+
+config SND_HDA_CODEC_ANALOG
+ bool "Build Analog Device HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Analog Device HD-audio codec support in
+ snd-hda-intel driver, such as AD1986A.
+
+config SND_HDA_CODEC_SIGMATEL
+ bool "Build IDT/Sigmatel HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include IDT (Sigmatel) HD-audio codec support in
+ snd-hda-intel driver, such as STAC9200.
+
+config SND_HDA_CODEC_VIA
+ bool "Build VIA HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include VIA HD-audio codec support in
+ snd-hda-intel driver, such as VT1708.
+
+config SND_HDA_CODEC_ATIHDMI
+ bool "Build ATI HDMI HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include ATI HDMI HD-audio codec support in
+ snd-hda-intel driver, such as ATI RS600 HDMI.
+
+config SND_HDA_CODEC_CONEXANT
+ bool "Build Conexant HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Conexant HD-audio codec support in
+ snd-hda-intel driver, such as CX20549.
+
+config SND_HDA_CODEC_CMEDIA
+ bool "Build C-Media HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include C-Media HD-audio codec support in
+ snd-hda-intel driver, such as CMI9880.
+
+config SND_HDA_CODEC_SI3054
+ bool "Build Silicon Labs 3054 HD-modem codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Silicon Labs 3054 HD-modem codec
+ (and compatibles) support in snd-hda-intel driver.
+
+config SND_HDA_GENERIC
+ bool "Enable generic HD-audio codec parser"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to enable the generic HD-audio codec parser
+ in snd-hda-intel driver.
+
+config SND_HDA_POWER_SAVE
+ bool "Aggressive power-saving on HD-audio"
+ depends on SND_HDA_INTEL && EXPERIMENTAL
+ help
+ Say Y here to enable more aggressive power-saving mode on
+ HD-audio driver. The power-saving timeout can be configured
+ via power_save option or over sysfs on-the-fly.
+
+config SND_HDA_POWER_SAVE_DEFAULT
+ int "Default time-out for HD-audio power-save mode"
+ depends on SND_HDA_POWER_SAVE
+ default 0
+ help
+ The default time-out value in seconds for HD-audio automatic
+ power-save mode. 0 means to disable the power-save mode.
+
config SND_HDSP
tristate "RME Hammerfall DSP Audio"
depends on SND
config SND_KORG1212
tristate "Korg 1212 IO"
depends on SND
+ select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL
select SND_PCM
help
Say Y here to include support for Korg 1212IO soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-korg1212.
+config SND_KORG1212_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for Korg1212 driver"
+ depends on SND_KORG1212
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the Korg1212 driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
depends on SND
+ select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro 3
To compile this driver as a module, choose M here: the module
will be called snd-maestro3.
+config SND_MAESTRO3_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for Maestro3 driver"
+ depends on SND_MAESTRO3
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the Maestro3 driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
config SND_MIXART
tristate "Digigram miXart"
depends on SND
config SND_RIPTIDE
tristate "Conexant Riptide"
depends on SND
- depends on FW_LOADER
+ select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-rme9652.
+config SND_SIS7019
+ tristate "SiS 7019 Audio Accelerator"
+ depends on SND && X86 && !X86_64
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the SiS 7019 Audio Accelerator.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sis7019.
+
config SND_SONICVIBES
tristate "S3 SonicVibes"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-via82xx-modem.
+config SND_VIRTUOSO
+ tristate "Asus Virtuoso 200 (Xonar)"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ Asus AV200 chip, i.e., Xonar D2 and Xonar D2X.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-virtuoso.
+
config SND_VX222
tristate "Digigram VX222"
depends on SND
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
depends on SND
+ select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-ymfpci.
+config SND_YMFPCI_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for YMFPCI driver"
+ depends on SND_YMFPCI
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the YMFPCI driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
+config SND_AC97_POWER_SAVE
+ bool "AC97 Power-Saving Mode"
+ depends on SND_AC97_CODEC && EXPERIMENTAL
+ default n
+ help
+ Say Y here to enable the aggressive power-saving support of
+ AC97 codecs. In this mode, the power-mode is dynamically
+ controlled at each open/close.
+
+ The mode is activated by passing power_save=1 option to
+ snd-ac97-codec driver. You can toggle it dynamically over
+ sysfs, too.
+
+config SND_AC97_POWER_SAVE_DEFAULT
+ int "Default time-out for AC97 power-save mode"
+ depends on SND_AC97_POWER_SAVE
+ default 0
+ help
+ The default time-out value in seconds for AC97 automatic
+ power-save mode. 0 means to disable the power-save mode.
+
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff