To compile this as a module, choose M here: the module
will be called snd-ad1889.
+config SND_ALS300
+ tristate "Avance Logic ALS300/ALS300+"
+ depends on SND
+ select SND_PCM
+ select SND_AC97_CODEC
+ select SND_OPL3_LIB
+ help
+ Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-als300
+
config SND_ALS4000
tristate "Avance Logic ALS4000"
depends on SND && ISA_DMA_API
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
+ select SND_SB_COMMON
help
Say Y here to include support for soundcards based on Avance Logic
ALS4000 chips.
will be called snd-atiixp-modem.
config SND_AU8810
- tristate "Aureal Advantage"
- depends on SND
+ tristate "Aureal Advantage"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Advantage soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8810.
-
+
config SND_AU8820
- tristate "Aureal Vortex"
- depends on SND
+ tristate "Aureal Vortex"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex soundcards.
- Supported features: Hardware Mixer and SRC. For more info, email
- the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer and SRC. For more info, email
+ the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8820.
-
+
config SND_AU8830
- tristate "Aureal Vortex 2"
- depends on SND
+ tristate "Aureal Vortex 2"
+ depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex 2 soundcards.
- Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8830.
-
+
+config SND_AW2
+ tristate "Emagic Audiowerk 2"
+ depends on SND
+ help
+ Say Y here to include support for Emagic Audiowerk 2 soundcards.
+
+ Supported features: Analog and SPDIF output. Analog or SPDIF input.
+ Note: Switch between analog and digital input does not always work.
+ It can produce continuous noise. The workaround is to switch again
+ (and again) between digital and analog input until it works.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-aw2.
+
+
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
depends on SND && EXPERIMENTAL
will be called snd-azt3328.
config SND_BT87X
- tristate "Bt87x Audio Capture"
- depends on SND
+ tristate "Bt87x Audio Capture"
+ depends on SND
select SND_PCM
- help
+ help
If you want to record audio from TV cards based on
Brooktree Bt878/Bt879 chips, say Y here and read
<file:Documentation/sound/alsa/Bt87x.txt>.
depends on SND
select SND_AC97_CODEC
select SND_RAWMIDI
+ select SND_VMASTER
help
Say Y here to include support for the Sound Blaster Audigy LS
and Live 24bit.
will be called snd-ca0106.
config SND_CMIPCI
- tristate "C-Media 8738, 8338"
+ tristate "C-Media 8338, 8738, 8768, 8770"
depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
help
- If you want to use soundcards based on C-Media CMI8338 or CMI8738
- chips, say Y here and read
+ If you want to use soundcards based on C-Media CMI8338, CMI8738,
+ CMI8768 or CMI8770 chips, say Y here and read
<file:Documentation/sound/alsa/CMIPCI.txt>.
To compile this driver as a module, choose M here: the module
will be called snd-cmipci.
+config SND_OXYGEN_LIB
+ tristate
+ depends on SND
+ select SND_PCM
+ select SND_MPU401_UART
+
+config SND_OXYGEN
+ tristate "C-Media 8788 (Oxygen)"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ C-Media CMI8788 (Oxygen HD Audio) chip:
+ * Asound A-8788
+ * AuzenTech X-Meridian
+ * Bgears b-Enspirer
+ * Club3D Theatron DTS
+ * HT-Omega Claro
+ * Razer Barracuda AC-1
+ * Sondigo Inferno
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-oxygen.
+
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
depends on SND
will be called snd-cs46xx.
config SND_CS46XX_NEW_DSP
- bool "Cirrus Logic (Sound Fusion) New DSP support (EXPERIMENTAL)"
- depends on SND_CS46XX && EXPERIMENTAL
+ bool "Cirrus Logic (Sound Fusion) New DSP support"
+ depends on SND_CS46XX
+ default y
help
Say Y here to use a new DSP image for SPDIF and dual codecs.
This works better than the old code, so say Y.
+config SND_CS5530
+ tristate "CS5530 Audio"
+ depends on SND && ISA_DMA_API
+ select SND_SB16_DSP
+ help
+ Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cs5530.
+
config SND_CS5535AUDIO
- tristate "CS5535 Audio"
+ tristate "CS5535/CS5536 Audio"
depends on SND && X86 && !X86_64
select SND_PCM
select SND_AC97_CODEC
help
Say Y here to include support for audio on CS5535 chips. It is
referred to as NS CS5535 IO or AMD CS5535 IO companion in
- various literature.
+ various literature. This driver also supports the CS5536 audio
+ device. However, for both chips, on certain boards, you may
+ need to use ac97_quirk=hp_only if your board has physically
+ mapped headphone out to master output. If that works for you,
+ send lspci -vvv output to the mailing list so that your board
+ can be identified in the quirks list.
To compile this driver as a module, choose M here: the module
will be called snd-cs5535audio.
+config SND_DARLA20
+ tristate "(Echoaudio) Darla20"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Darla.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-darla20
+
+config SND_GINA20
+ tristate "(Echoaudio) Gina20"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-gina20
+
+config SND_LAYLA20
+ tristate "(Echoaudio) Layla20"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Layla.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-layla20
+
+config SND_DARLA24
+ tristate "(Echoaudio) Darla24"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Darla24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-darla24
+
+config SND_GINA24
+ tristate "(Echoaudio) Gina24"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-gina24
+
+config SND_LAYLA24
+ tristate "(Echoaudio) Layla24"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Layla24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-layla24
+
+config SND_MONA
+ tristate "(Echoaudio) Mona"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Mona.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mona
+
+config SND_MIA
+ tristate "(Echoaudio) Mia"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mia
+
+config SND_ECHO3G
+ tristate "(Echoaudio) 3G cards"
+ depends on SND
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-echo3g
+
+config SND_INDIGO
+ tristate "(Echoaudio) Indigo"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigo
+
+config SND_INDIGOIO
+ tristate "(Echoaudio) Indigo IO"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigoio
+
+config SND_INDIGODJ
+ tristate "(Echoaudio) Indigo DJ"
+ depends on SND
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigodj
+
config SND_EMU10K1
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
depends on SND
+ select FW_LOADER
select SND_HWDEP
select SND_RAWMIDI
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-fm801.
-config SND_FM801_TEA575X
- tristate "ForteMedia FM801 + TEA5757 tuner"
+config SND_FM801_TEA575X_BOOL
+ bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
- select VIDEO_DEV
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
- Forte SF256-PCS-02).
+ Forte SF256-PCS-02) into the snd-fm801 driver.
- To compile this driver as a module, choose M here: the module
- will be called snd-fm801-tea575x.
+ This will enable support for the old V4L1 API.
+
+config SND_FM801_TEA575X
+ tristate
+ depends on SND_FM801_TEA575X_BOOL
+ default SND_FM801
+ select VIDEO_V4L1
+ select VIDEO_DEV
config SND_HDA_INTEL
tristate "Intel HD Audio"
depends on SND
select SND_PCM
+ select SND_VMASTER
help
Say Y here to include support for Intel "High Definition
Audio" (Azalia) motherboard devices.
To compile this driver as a module, choose M here: the module
will be called snd-hda-intel.
+config SND_HDA_HWDEP
+ bool "Build hwdep interface for HD-audio driver"
+ depends on SND_HDA_INTEL
+ select SND_HWDEP
+ help
+ Say Y here to build a hwdep interface for HD-audio driver.
+ This interface can be used for out-of-band communication
+ with codecs for debugging purposes.
+
+config SND_HDA_CODEC_REALTEK
+ bool "Build Realtek HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Realtek HD-audio codec support in
+ snd-hda-intel driver, such as ALC880.
+
+config SND_HDA_CODEC_ANALOG
+ bool "Build Analog Device HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Analog Device HD-audio codec support in
+ snd-hda-intel driver, such as AD1986A.
+
+config SND_HDA_CODEC_SIGMATEL
+ bool "Build IDT/Sigmatel HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include IDT (Sigmatel) HD-audio codec support in
+ snd-hda-intel driver, such as STAC9200.
+
+config SND_HDA_CODEC_VIA
+ bool "Build VIA HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include VIA HD-audio codec support in
+ snd-hda-intel driver, such as VT1708.
+
+config SND_HDA_CODEC_ATIHDMI
+ bool "Build ATI HDMI HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include ATI HDMI HD-audio codec support in
+ snd-hda-intel driver, such as ATI RS600 HDMI.
+
+config SND_HDA_CODEC_CONEXANT
+ bool "Build Conexant HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Conexant HD-audio codec support in
+ snd-hda-intel driver, such as CX20549.
+
+config SND_HDA_CODEC_CMEDIA
+ bool "Build C-Media HD-audio codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include C-Media HD-audio codec support in
+ snd-hda-intel driver, such as CMI9880.
+
+config SND_HDA_CODEC_SI3054
+ bool "Build Silicon Labs 3054 HD-modem codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Silicon Labs 3054 HD-modem codec
+ (and compatibles) support in snd-hda-intel driver.
+
+config SND_HDA_GENERIC
+ bool "Enable generic HD-audio codec parser"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to enable the generic HD-audio codec parser
+ in snd-hda-intel driver.
+
+config SND_HDA_POWER_SAVE
+ bool "Aggressive power-saving on HD-audio"
+ depends on SND_HDA_INTEL && EXPERIMENTAL
+ help
+ Say Y here to enable more aggressive power-saving mode on
+ HD-audio driver. The power-saving timeout can be configured
+ via power_save option or over sysfs on-the-fly.
+
+config SND_HDA_POWER_SAVE_DEFAULT
+ int "Default time-out for HD-audio power-save mode"
+ depends on SND_HDA_POWER_SAVE
+ default 0
+ help
+ The default time-out value in seconds for HD-audio automatic
+ power-save mode. 0 means to disable the power-save mode.
+
config SND_HDSP
tristate "RME Hammerfall DSP Audio"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-hdspm.
+config SND_HIFIER
+ tristate "TempoTec HiFier Fantasia"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for the MediaTek/TempoTec HiFier
+ Fantasia sound card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hifier.
+
config SND_ICE1712
tristate "ICEnsemble ICE1712 (Envy24)"
depends on SND
depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
+ select SND_VMASTER
help
Say Y here to include support for soundcards based on
ICE/VT1724/1720 (Envy24HT/PT) chips.
will be called snd-intel8x0.
config SND_INTEL8X0M
- tristate "Intel/SiS/nVidia/AMD MC97 Modem (EXPERIMENTAL)"
- depends on SND && EXPERIMENTAL
+ tristate "Intel/SiS/nVidia/AMD MC97 Modem"
+ depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
config SND_KORG1212
tristate "Korg 1212 IO"
depends on SND
+ select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL
select SND_PCM
help
Say Y here to include support for Korg 1212IO soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-korg1212.
+config SND_KORG1212_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for Korg1212 driver"
+ depends on SND_KORG1212
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the Korg1212 driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
depends on SND
+ select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro 3
To compile this driver as a module, choose M here: the module
will be called snd-maestro3.
+config SND_MAESTRO3_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for Maestro3 driver"
+ depends on SND_MAESTRO3
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the Maestro3 driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
config SND_MIXART
tristate "Digigram miXart"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-pcxhr.
+config SND_RIPTIDE
+ tristate "Conexant Riptide"
+ depends on SND
+ select FW_LOADER
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say 'Y' or 'M' to include support for Conexant Riptide chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-riptide
+
config SND_RME32
tristate "RME Digi32, 32/8, 32 PRO"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-rme9652.
+config SND_SIS7019
+ tristate "SiS 7019 Audio Accelerator"
+ depends on SND && X86 && !X86_64
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the SiS 7019 Audio Accelerator.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sis7019.
+
config SND_SONICVIBES
tristate "S3 SonicVibes"
depends on SND
To compile this driver as a module, choose M here: the module
will be called snd-via82xx-modem.
+config SND_VIRTUOSO
+ tristate "Asus Virtuoso 100/200 (Xonar)"
+ depends on SND
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-virtuoso.
+
config SND_VX222
tristate "Digigram VX222"
depends on SND
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
depends on SND
+ select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-ymfpci.
+config SND_YMFPCI_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for YMFPCI driver"
+ depends on SND_YMFPCI
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the YMFPCI driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
+config SND_AC97_POWER_SAVE
+ bool "AC97 Power-Saving Mode"
+ depends on SND_AC97_CODEC && EXPERIMENTAL
+ default n
+ help
+ Say Y here to enable the aggressive power-saving support of
+ AC97 codecs. In this mode, the power-mode is dynamically
+ controlled at each open/close.
+
+ The mode is activated by passing power_save=1 option to
+ snd-ac97-codec driver. You can toggle it dynamically over
+ sysfs, too.
+
+config SND_AC97_POWER_SAVE_DEFAULT
+ int "Default time-out for AC97 power-save mode"
+ depends on SND_AC97_POWER_SAVE
+ default 0
+ help
+ The default time-out value in seconds for AC97 automatic
+ power-save mode. 0 means to disable the power-save mode.
+
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff