* To quickly load the module,
*
* modprobe -a snd-cmi8330 sbport=0x220 sbirq=5 sbdma8=1
- * sbdma16=5 wssport=0x530 wssirq=11 wssdma=0
+ * sbdma16=5 wssport=0x530 wssirq=11 wssdma=0 fmport=0x388
*
* This card has two mixers and two PCM devices. I've cheesed it such
* that recording and playback can be done through the same device.
- * The driver "magically" routes the capturing to the AD1848 codec,
+ * The driver "magically" routes the capturing to the CMI8330 codec,
* and playback to the SB16 codec. This allows for full-duplex mode
* to some extent.
* The utilities in alsa-utils are aware of both devices, so passing
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/wss.h>
+#include <sound/opl3.h>
+#include <sound/mpu401.h>
#include <sound/sb.h>
#include <sound/initval.h>
static long wssport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
static int wssirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
static int wssdma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static long fmport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static long mpuport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard.");
module_param_array(wssdma, int, NULL, 0444);
MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver.");
+module_param_array(fmport, long, NULL, 0444);
+MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver.");
+module_param_array(mpuport, long, NULL, 0444);
+MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver.");
+module_param_array(mpuirq, int, NULL, 0444);
+MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port.");
#ifdef CONFIG_PNP
static int isa_registered;
static int pnp_registered;
#ifdef CONFIG_PNP
struct pnp_dev *cap;
struct pnp_dev *play;
+ struct pnp_dev *mpu;
#endif
struct snd_card *card;
struct snd_wss *wss;
#ifdef CONFIG_PNP
static struct pnp_card_device_id snd_cmi8330_pnpids[] = {
- { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" } } },
+ { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } },
{ .id = "" }
};
CMI8330_RMUX3D, 5, 1, 1),
WSS_SINGLE("PC Speaker Playback Volume", 0,
CMI8330_OUTPUTVOL, 3, 3, 0),
-WSS_SINGLE("FM Playback Switch", 0,
- CMI8330_RECMUX, 3, 1, 1),
+WSS_DOUBLE("FM Playback Switch", 0,
+ CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
+WSS_DOUBLE("FM Playback Volume", 0,
+ CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1),
WSS_SINGLE(SNDRV_CTL_NAME_IEC958("Input ", CAPTURE, SWITCH), 0,
CMI8330_RMUX3D, 7, 1, 1),
WSS_SINGLE(SNDRV_CTL_NAME_IEC958("Input ", PLAYBACK, SWITCH), 0,
if (acard->play == NULL)
return -EBUSY;
+ acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL);
+ if (acard->play == NULL)
+ return -EBUSY;
+
pdev = acard->cap;
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n");
+ snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
return -EBUSY;
}
wssport[dev] = pnp_port_start(pdev, 0);
wssdma[dev] = pnp_dma(pdev, 0);
wssirq[dev] = pnp_irq(pdev, 0);
+ fmport[dev] = pnp_port_start(pdev, 1);
/* allocate SB16 resources */
pdev = acard->play;
sbdma16[dev] = pnp_dma(pdev, 1);
sbirq[dev] = pnp_irq(pdev, 0);
+ /* allocate MPU-401 resources */
+ pdev = acard->mpu;
+
+ err = pnp_activate_dev(pdev);
+ if (err < 0) {
+ snd_printk(KERN_ERR
+ "CMI8330/C3D (MPU-401) PnP configure failure\n");
+ return -EBUSY;
+ }
+ mpuport[dev] = pnp_port_start(pdev, 0);
+ mpuirq[dev] = pnp_irq(pdev, 0);
return 0;
}
#endif
#define PFX "cmi8330: "
-static struct snd_card *snd_cmi8330_card_new(int dev)
+static int snd_cmi8330_card_new(int dev, struct snd_card **cardp)
{
struct snd_card *card;
struct snd_cmi8330 *acard;
+ int err;
- card = snd_card_new(index[dev], id[dev], THIS_MODULE,
- sizeof(struct snd_cmi8330));
- if (card == NULL) {
+ err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+ sizeof(struct snd_cmi8330), &card);
+ if (err < 0) {
snd_printk(KERN_ERR PFX "could not get a new card\n");
- return NULL;
+ return err;
}
acard = card->private_data;
acard->card = card;
- return card;
+ *cardp = card;
+ return 0;
}
static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
{
struct snd_cmi8330 *acard;
int i, err;
+ struct snd_opl3 *opl3;
acard = card->private_data;
err = snd_wss_create(card, wssport[dev] + 4, -1,
wssdma[dev], -1,
WSS_HW_DETECT, 0, &acard->wss);
if (err < 0) {
- snd_printk(KERN_ERR PFX "(AD1848) device busy??\n");
+ snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
return err;
}
if (acard->wss->hardware != WSS_HW_CMI8330) {
- snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n");
+ snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
return -ENODEV;
}
snd_printk(KERN_ERR PFX "failed to create pcms\n");
return err;
}
+ if (fmport[dev] != SNDRV_AUTO_PORT) {
+ if (snd_opl3_create(card,
+ fmport[dev], fmport[dev] + 2,
+ OPL3_HW_AUTO, 0, &opl3) < 0) {
+ snd_printk(KERN_ERR PFX
+ "no OPL device at 0x%lx-0x%lx ?\n",
+ fmport[dev], fmport[dev] + 2);
+ } else {
+ err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ if (mpuport[dev] != SNDRV_AUTO_PORT) {
+ if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
+ mpuport[dev], 0, mpuirq[dev],
+ IRQF_DISABLED, NULL) < 0)
+ printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n",
+ mpuport[dev]);
+ }
strcpy(card->driver, "CMI8330/C3D");
strcpy(card->shortname, "C-Media CMI8330/C3D");
struct snd_card *card;
int err;
- card = snd_cmi8330_card_new(dev);
- if (! card)
- return -ENOMEM;
+ err = snd_cmi8330_card_new(dev, &card);
+ if (err < 0)
+ return err;
snd_card_set_dev(card, pdev);
if ((err = snd_cmi8330_probe(card, dev)) < 0) {
snd_card_free(card);
if (dev >= SNDRV_CARDS)
return -ENODEV;
- card = snd_cmi8330_card_new(dev);
- if (! card)
- return -ENOMEM;
+ res = snd_cmi8330_card_new(dev, &card);
+ if (res < 0)
+ return res;
if ((res = snd_cmi8330_pnp(dev, card->private_data, pcard, pid)) < 0) {
snd_printk(KERN_ERR PFX "PnP detection failed\n");
snd_card_free(card);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff