/*
- * Driver for C-Media's CMI8330 soundcards.
+ * Driver for C-Media's CMI8330 and CMI8329 soundcards.
* Copyright (c) by George Talusan <gstalusan@uwaterloo.ca>
* http://www.undergrad.math.uwaterloo.ca/~gstalusa
*
*
* This card has two mixers and two PCM devices. I've cheesed it such
* that recording and playback can be done through the same device.
- * The driver "magically" routes the capturing to the CMI8330 codec,
+ * The driver "magically" routes the capturing to the AD1848 codec,
* and playback to the SB16 codec. This allows for full-duplex mode
* to some extent.
* The utilities in alsa-utils are aware of both devices, so passing
/*
*/
MODULE_AUTHOR("George Talusan <gstalusan@uwaterloo.ca>");
-MODULE_DESCRIPTION("C-Media CMI8330");
+MODULE_DESCRIPTION("C-Media CMI8330/CMI8329");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{C-Media,CMI8330,isapnp:{CMI0001,@@@0001,@X@0001}}}");
static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard.");
+MODULE_PARM_DESC(index, "Index value for CMI8330/CMI8329 soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for CMI8330 soundcard.");
+MODULE_PARM_DESC(id, "ID string for CMI8330/CMI8329 soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable CMI8330 soundcard.");
+MODULE_PARM_DESC(enable, "Enable CMI8330/CMI8329 soundcard.");
#ifdef CONFIG_PNP
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
module_param_array(sbport, long, NULL, 0444);
-MODULE_PARM_DESC(sbport, "Port # for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver.");
module_param_array(sbirq, int, NULL, 0444);
-MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver.");
module_param_array(sbdma8, int, NULL, 0444);
-MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver.");
module_param_array(sbdma16, int, NULL, 0444);
-MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver.");
module_param_array(wssport, long, NULL, 0444);
-MODULE_PARM_DESC(wssport, "Port # for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver.");
module_param_array(wssirq, int, NULL, 0444);
-MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver.");
module_param_array(wssdma, int, NULL, 0444);
-MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver.");
module_param_array(fmport, long, NULL, 0444);
-MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver.");
+MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver.");
module_param_array(mpuport, long, NULL, 0444);
-MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver.");
+MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver.");
module_param_array(mpuirq, int, NULL, 0444);
-MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port.");
+MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port.");
#ifdef CONFIG_PNP
static int isa_registered;
static int pnp_registered;
typedef int (*snd_pcm_open_callback_t)(struct snd_pcm_substream *);
+enum card_type {
+ CMI8330,
+ CMI8329
+};
+
struct snd_cmi8330 {
#ifdef CONFIG_PNP
struct pnp_dev *cap;
snd_pcm_open_callback_t open;
void *private_data; /* sb or wss */
} streams[2];
+
+ enum card_type type;
};
#ifdef CONFIG_PNP
static struct pnp_card_device_id snd_cmi8330_pnpids[] = {
+ { .id = "CMI0001", .devs = { { "@X@0001" }, { "@@@0001" }, { "@H@0001" }, { "A@@0001" } } },
{ .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } },
{ .id = "" }
};
CMI8330_WAVGAIN, CMI8330_WAVGAIN, 4, 0, 15, 0),
WSS_SINGLE("3D Control - Switch", 0,
CMI8330_RMUX3D, 5, 1, 1),
-WSS_SINGLE("PC Speaker Playback Volume", 0,
+WSS_SINGLE("Beep Playback Volume", 0,
CMI8330_OUTPUTVOL, 3, 3, 0),
WSS_DOUBLE("FM Playback Switch", 0,
CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
SB_DOUBLE("SB Line Playback Volume", SB_DSP4_LINE_DEV, (SB_DSP4_LINE_DEV + 1), 3, 3, 31),
SB_SINGLE("SB Mic Playback Switch", SB_DSP4_OUTPUT_SW, 0, 1),
SB_SINGLE("SB Mic Playback Volume", SB_DSP4_MIC_DEV, 3, 31),
-SB_SINGLE("SB PC Speaker Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
+SB_SINGLE("SB Beep Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
SB_DOUBLE("SB Capture Volume", SB_DSP4_IGAIN_DEV, (SB_DSP4_IGAIN_DEV + 1), 6, 6, 3),
SB_DOUBLE("SB Playback Volume", SB_DSP4_OGAIN_DEV, (SB_DSP4_OGAIN_DEV + 1), 6, 6, 3),
SB_SINGLE("SB Mic Auto Gain", SB_DSP4_MIC_AGC, 0, 1),
unsigned int idx;
int err;
- strcpy(card->mixername, "CMI8330/C3D");
+ strcpy(card->mixername, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
for (idx = 0; idx < ARRAY_SIZE(snd_cmi8330_controls); idx++) {
err = snd_ctl_add(card,
struct pnp_dev *pdev;
int err;
+ /* CMI8329 has a device with ID A@@0001, CMI8330 does not */
+ acard->type = (id->devs[3].id[0]) ? CMI8329 : CMI8330;
+
acard->cap = pnp_request_card_device(card, id->devs[0].id, NULL);
if (acard->cap == NULL)
return -EBUSY;
return -EBUSY;
acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL);
- if (acard->play == NULL)
+ if (acard->mpu == NULL)
return -EBUSY;
pdev = acard->cap;
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
+ snd_printk(KERN_ERR "AD1848 PnP configure failure\n");
return -EBUSY;
}
wssport[dev] = pnp_port_start(pdev, 0);
wssdma[dev] = pnp_dma(pdev, 0);
wssirq[dev] = pnp_irq(pdev, 0);
- fmport[dev] = pnp_port_start(pdev, 1);
+ if (pnp_port_start(pdev, 1))
+ fmport[dev] = pnp_port_start(pdev, 1);
/* allocate SB16 resources */
pdev = acard->play;
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D (SB16) PnP configure failure\n");
+ snd_printk(KERN_ERR "SB16 PnP configure failure\n");
return -EBUSY;
}
sbport[dev] = pnp_port_start(pdev, 0);
sbdma8[dev] = pnp_dma(pdev, 0);
sbdma16[dev] = pnp_dma(pdev, 1);
sbirq[dev] = pnp_irq(pdev, 0);
+ /* On CMI8239, the OPL3 port might be present in SB16 PnP resources */
+ if (fmport[dev] == SNDRV_AUTO_PORT) {
+ if (pnp_port_start(pdev, 1))
+ fmport[dev] = pnp_port_start(pdev, 1);
+ else
+ fmport[dev] = 0x388; /* Or hardwired */
+ }
/* allocate MPU-401 resources */
pdev = acard->mpu;
err = pnp_activate_dev(pdev);
- if (err < 0) {
- snd_printk(KERN_ERR
- "CMI8330/C3D (MPU-401) PnP configure failure\n");
- return -EBUSY;
+ if (err < 0)
+ snd_printk(KERN_ERR "MPU-401 PnP configure failure: will be disabled\n");
+ else {
+ mpuport[dev] = pnp_port_start(pdev, 0);
+ mpuirq[dev] = pnp_irq(pdev, 0);
}
- mpuport[dev] = pnp_port_start(pdev, 0);
- mpuirq[dev] = pnp_irq(pdev, 0);
return 0;
}
#endif
snd_cmi8330_capture_open
};
- if ((err = snd_pcm_new(card, "CMI8330", 0, 1, 1, &pcm)) < 0)
+ if ((err = snd_pcm_new(card, (chip->type == CMI8329) ? "CMI8329" : "CMI8330", 0, 1, 1, &pcm)) < 0)
return err;
- strcpy(pcm->name, "CMI8330");
+ strcpy(pcm->name, (chip->type == CMI8329) ? "CMI8329" : "CMI8330");
pcm->private_data = chip;
/* SB16 */
#define PFX "cmi8330: "
-static struct snd_card *snd_cmi8330_card_new(int dev)
+static int snd_cmi8330_card_new(int dev, struct snd_card **cardp)
{
struct snd_card *card;
struct snd_cmi8330 *acard;
+ int err;
- card = snd_card_new(index[dev], id[dev], THIS_MODULE,
- sizeof(struct snd_cmi8330));
- if (card == NULL) {
+ err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+ sizeof(struct snd_cmi8330), &card);
+ if (err < 0) {
snd_printk(KERN_ERR PFX "could not get a new card\n");
- return NULL;
+ return err;
}
acard = card->private_data;
acard->card = card;
- return card;
+ *cardp = card;
+ return 0;
}
static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
wssdma[dev], -1,
WSS_HW_DETECT, 0, &acard->wss);
if (err < 0) {
- snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
+ snd_printk(KERN_ERR PFX "AD1848 device busy??\n");
return err;
}
if (acard->wss->hardware != WSS_HW_CMI8330) {
- snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
+ snd_printk(KERN_ERR PFX "AD1848 not found during probe\n");
return -ENODEV;
}
sbdma8[dev],
sbdma16[dev],
SB_HW_AUTO, &acard->sb)) < 0) {
- snd_printk(KERN_ERR PFX "(SB16) device busy??\n");
+ snd_printk(KERN_ERR PFX "SB16 device busy??\n");
return err;
}
if (acard->sb->hardware != SB_HW_16) {
- snd_printk(KERN_ERR PFX "(SB16) not found during probe\n");
+ snd_printk(KERN_ERR PFX "SB16 not found during probe\n");
return err;
}
mpuport[dev]);
}
- strcpy(card->driver, "CMI8330/C3D");
- strcpy(card->shortname, "C-Media CMI8330/C3D");
+ strcpy(card->driver, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
+ strcpy(card->shortname, (acard->type == CMI8329) ? "C-Media CMI8329" : "C-Media CMI8330/C3D");
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
card->shortname,
acard->wss->port,
struct snd_card *card;
int err;
- card = snd_cmi8330_card_new(dev);
- if (! card)
- return -ENOMEM;
+ err = snd_cmi8330_card_new(dev, &card);
+ if (err < 0)
+ return err;
snd_card_set_dev(card, pdev);
if ((err = snd_cmi8330_probe(card, dev)) < 0) {
snd_card_free(card);
if (dev >= SNDRV_CARDS)
return -ENODEV;
- card = snd_cmi8330_card_new(dev);
- if (! card)
- return -ENOMEM;
+ res = snd_cmi8330_card_new(dev, &card);
+ if (res < 0)
+ return res;
if ((res = snd_cmi8330_pnp(dev, card->private_data, pcard, pid)) < 0) {
snd_printk(KERN_ERR PFX "PnP detection failed\n");
snd_card_free(card);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff