ALSA: cs46xx - fix some typos

[safe/jmp/linux-2.6] / sound / isa / cmi8330.c

diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index 33e63fa..8246aae 100644 (file)
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -237,7 +237,7 @@ WSS_DOUBLE("Wavetable Capture Volume", 0,
                CMI8330_WAVGAIN, CMI8330_WAVGAIN, 4, 0, 15, 0),
 WSS_SINGLE("3D Control - Switch", 0,
                CMI8330_RMUX3D, 5, 1, 1),
-WSS_SINGLE("PC Speaker Playback Volume", 0,
+WSS_SINGLE("Beep Playback Volume", 0,
                CMI8330_OUTPUTVOL, 3, 3, 0),
 WSS_DOUBLE("FM Playback Switch", 0,
                CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
@@ -262,7 +262,7 @@ SB_DOUBLE("SB Line Playback Switch", SB_DSP4_OUTPUT_SW, SB_DSP4_OUTPUT_SW, 4, 3,
 SB_DOUBLE("SB Line Playback Volume", SB_DSP4_LINE_DEV, (SB_DSP4_LINE_DEV + 1), 3, 3, 31),
 SB_SINGLE("SB Mic Playback Switch", SB_DSP4_OUTPUT_SW, 0, 1),
 SB_SINGLE("SB Mic Playback Volume", SB_DSP4_MIC_DEV, 3, 31),
-SB_SINGLE("SB PC Speaker Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
+SB_SINGLE("SB Beep Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
 SB_DOUBLE("SB Capture Volume", SB_DSP4_IGAIN_DEV, (SB_DSP4_IGAIN_DEV + 1), 6, 6, 3),
 SB_DOUBLE("SB Playback Volume", SB_DSP4_OGAIN_DEV, (SB_DSP4_OGAIN_DEV + 1), 6, 6, 3),
 SB_SINGLE("SB Mic Auto Gain", SB_DSP4_MIC_AGC, 0, 1),
@@ -362,7 +362,7 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard,
        wssport[dev] = pnp_port_start(pdev, 0);
        wssdma[dev] = pnp_dma(pdev, 0);
        wssirq[dev] = pnp_irq(pdev, 0);
-       if (acard->type == CMI8330)
+       if (pnp_port_start(pdev, 1))
                fmport[dev] = pnp_port_start(pdev, 1);
 
        /* allocate SB16 resources */
@@ -377,19 +377,24 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard,
        sbdma8[dev] = pnp_dma(pdev, 0);
        sbdma16[dev] = pnp_dma(pdev, 1);
        sbirq[dev] = pnp_irq(pdev, 0);
-       if (acard->type == CMI8329)
-               fmport[dev] = pnp_port_start(pdev, 1);
+       /* On CMI8239, the OPL3 port might be present in SB16 PnP resources */
+       if (fmport[dev] == SNDRV_AUTO_PORT) {
+               if (pnp_port_start(pdev, 1))
+                       fmport[dev] = pnp_port_start(pdev, 1);
+               else
+                       fmport[dev] = 0x388;    /* Or hardwired */
+       }
 
        /* allocate MPU-401 resources */
        pdev = acard->mpu;
 
        err = pnp_activate_dev(pdev);
-       if (err < 0) {
-               snd_printk(KERN_ERR "MPU-401 PnP configure failure\n");
-               return -EBUSY;
+       if (err < 0)
+               snd_printk(KERN_ERR "MPU-401 PnP configure failure: will be disabled\n");
+       else {
+               mpuport[dev] = pnp_port_start(pdev, 0);
+               mpuirq[dev] = pnp_irq(pdev, 0);
        }
-       mpuport[dev] = pnp_port_start(pdev, 0);
-       mpuirq[dev] = pnp_irq(pdev, 0);
        return 0;
 }
 #endif