# ALSA ISA drivers
-config SND_AD1848_LIB
- tristate
- select SND_PCM
-
-config SND_CS4231_LIB
+config SND_WSS_LIB
tristate
select SND_PCM
select SND_PCM
select SND_SB_COMMON
-menu "ISA devices"
- depends on SND!=n && ISA && ISA_DMA_API
+menuconfig SND_ISA
+ bool "ISA sound devices"
+ depends on ISA && ISA_DMA_API
+ default y
+ help
+ Support for sound devices connected via the ISA bus.
+
+if SND_ISA
config SND_ADLIB
tristate "AdLib FM card"
- depends on SND
select SND_OPL3_LIB
help
Say Y here to include support for AdLib FM cards.
config SND_AD1816A
tristate "Analog Devices SoundPort AD1816A"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
config SND_AD1848
tristate "Generic AD1848/CS4248 driver"
- depends on SND
- select SND_AD1848_LIB
+ select SND_WSS_LIB
help
Say Y here to include support for AD1848 (Analog Devices) or
CS4248 (Cirrus Logic - Crystal Semiconductors) chips.
- For newer chips from Cirrus Logic, use the CS4231, CS4232 or
- CS4236+ drivers.
+ For newer chips from Cirrus Logic, use the CS4231 or CS4232+
+ drivers.
To compile this driver as a module, choose M here: the module
will be called snd-ad1848.
config SND_ALS100
tristate "Avance Logic ALS100/ALS120"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
config SND_AZT2320
tristate "Aztech Systems AZT2320"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
- select SND_CS4231_LIB
+ select SND_WSS_LIB
help
Say Y here to include support for soundcards based on the
Aztech Systems AZT2320 chip.
config SND_CMI8330
tristate "C-Media CMI8330"
- depends on SND
- select SND_AD1848_LIB
+ select SND_WSS_LIB
select SND_SB16_DSP
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
help
Say Y here to include support for soundcards based on the
C-Media CMI8330 chip.
config SND_CS4231
tristate "Generic Cirrus Logic CS4231 driver"
- depends on SND
select SND_MPU401_UART
- select SND_CS4231_LIB
+ select SND_WSS_LIB
help
Say Y here to include support for CS4231 chips from Cirrus
Logic - Crystal Semiconductors.
To compile this driver as a module, choose M here: the module
will be called snd-cs4231.
-config SND_CS4232
- tristate "Generic Cirrus Logic CS4232 driver"
- depends on SND
- select SND_OPL3_LIB
- select SND_MPU401_UART
- select SND_CS4231_LIB
- help
- Say Y here to include support for CS4232 chips from Cirrus
- Logic - Crystal Semiconductors.
-
- To compile this driver as a module, choose M here: the module
- will be called snd-cs4232.
-
config SND_CS4236
- tristate "Generic Cirrus Logic CS4236+ driver"
- depends on SND
+ tristate "Generic Cirrus Logic CS4232/CS4236+ driver"
select SND_OPL3_LIB
select SND_MPU401_UART
- select SND_CS4231_LIB
+ select SND_WSS_LIB
help
- Say Y to include support for CS4235,CS4236,CS4237B,CS4238B,
- CS4239 chips from Cirrus Logic - Crystal Semiconductors.
+ Say Y to include support for CS4232,CS4235,CS4236,CS4237B,
+ CS4238B,CS4239 chips from Cirrus Logic - Crystal
+ Semiconductors.
To compile this driver as a module, choose M here: the module
will be called snd-cs4236.
config SND_DT019X
tristate "Diamond Technologies DT-019X, Avance Logic ALS-007"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
config SND_ES968
tristate "Generic ESS ES968 driver"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_MPU401_UART
select SND_SB8_DSP
config SND_ES1688
tristate "Generic ESS ES688/ES1688 driver"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
config SND_ES18XX
tristate "Generic ESS ES18xx driver"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
will be called snd-es18xx.
config SND_SC6000
- tristate "Gallant SC-6000, Audio Excel DSP 16"
- depends on SND && HAS_IOPORT
- select SND_AD1848_LIB
+ tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16"
+ depends on HAS_IOPORT
+ select SND_WSS_LIB
select SND_OPL3_LIB
select SND_MPU401_UART
help
- Say Y here to include support for Gallant SC-6000 card and clones:
+ Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000
+ cards and clones:
Audio Excel DSP 16 and Zoltrix AV302.
+ These cards are based on CompuMedia ASC-9308 or ASC-9408 chips.
+
To compile this driver as a module, choose M here: the module
will be called snd-sc6000.
-config SND_GUS_SYNTH
- tristate
-
config SND_GUSCLASSIC
tristate "Gravis UltraSound Classic"
- depends on SND
select SND_RAWMIDI
select SND_PCM
- select SND_GUS_SYNTH
help
Say Y here to include support for Gravis UltraSound Classic
soundcards.
config SND_GUSEXTREME
tristate "Gravis UltraSound Extreme"
- depends on SND
- select SND_HWDEP
+ select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
- select SND_GUS_SYNTH
help
Say Y here to include support for Gravis UltraSound Extreme
soundcards.
config SND_GUSMAX
tristate "Gravis UltraSound MAX"
- depends on SND
select SND_RAWMIDI
- select SND_CS4231_LIB
- select SND_GUS_SYNTH
+ select SND_WSS_LIB
help
Say Y here to include support for Gravis UltraSound MAX
soundcards.
config SND_INTERWAVE
tristate "AMD InterWave, Gravis UltraSound PnP"
- depends on SND && PNP && ISA
+ depends on PNP
select SND_RAWMIDI
- select SND_CS4231_LIB
- select SND_GUS_SYNTH
+ select SND_WSS_LIB
help
Say Y here to include support for AMD InterWave based
soundcards (Gravis UltraSound Plug & Play, STB SoundRage32,
config SND_INTERWAVE_STB
tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)"
- depends on SND && PNP && ISA
+ depends on PNP
select SND_RAWMIDI
- select SND_CS4231_LIB
- select SND_GUS_SYNTH
+ select SND_WSS_LIB
help
Say Y here to include support for AMD InterWave based
soundcards with a TEA6330T bass and treble regulator
config SND_OPL3SA2
tristate "Yamaha OPL3-SA2/SA3"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
- select SND_CS4231_LIB
+ select SND_WSS_LIB
help
Say Y here to include support for Yamaha OPL3-SA2 and OPL3-SA3
chips.
config SND_OPTI92X_AD1848
tristate "OPTi 82C92x - AD1848"
- depends on SND
select SND_OPL3_LIB
select SND_OPL4_LIB
select SND_MPU401_UART
- select SND_AD1848_LIB
+ select SND_WSS_LIB
help
Say Y here to include support for soundcards based on Opti
82C92x or OTI-601 chips and using an AD1848 codec.
config SND_OPTI92X_CS4231
tristate "OPTi 82C92x - CS4231"
- depends on SND
select SND_OPL3_LIB
select SND_OPL4_LIB
select SND_MPU401_UART
- select SND_CS4231_LIB
+ select SND_WSS_LIB
help
Say Y here to include support for soundcards based on Opti
82C92x chips and using a CS4231 codec.
config SND_OPTI93X
tristate "OPTi 82C93x"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
- select SND_PCM
+ select SND_WSS_LIB
help
Say Y here to include support for soundcards based on Opti
82C93x chips.
config SND_MIRO
tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver"
- depends on SND
select SND_OPL4_LIB
- select SND_CS4231_LIB
+ select SND_WSS_LIB
select SND_MPU401_UART
select SND_PCM
help
config SND_SB8
tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
- depends on SND
select SND_OPL3_LIB
select SND_RAWMIDI
select SND_SB8_DSP
config SND_SB16
tristate "Sound Blaster 16 (PnP)"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_SB16_DSP
config SND_SBAWE
tristate "Sound Blaster AWE (32,64) (PnP)"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_SB16_DSP
config SND_SB16_CSP
bool "Sound Blaster 16/AWE CSP support"
depends on (SND_SB16 || SND_SBAWE) && (BROKEN || !PPC)
- select FW_LOADER if !SND_SB16_CSP_FIRMWARE_IN_KERNEL
+ select FW_LOADER
help
Say Y here to include support for the CSP core. This special
coprocessor can do variable tasks like various compression and
decompression algorithms.
-config SND_SB16_CSP_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for SB16 CSP"
- depends on SND_SB16_CSP
- default y
- help
- Say Y here to include the static firmware built in the kernel
- for the SB16 CSP controller. If you choose N here, you need
- to install the firmware files from the alsa-firmware package.
-
config SND_SGALAXY
tristate "Aztech Sound Galaxy"
- depends on SND
- select SND_AD1848_LIB
+ select SND_WSS_LIB
help
Say Y here to include support for Aztech Sound Galaxy
soundcards.
will be called snd-sgalaxy.
config SND_SSCAPE
- tristate "Ensoniq SoundScape PnP driver"
- depends on SND
- select SND_HWDEP
+ tristate "Ensoniq SoundScape driver"
select SND_MPU401_UART
- select SND_CS4231_LIB
+ select SND_WSS_LIB
+ select FW_LOADER
help
- Say Y here to include support for Ensoniq SoundScape PnP
- soundcards.
+ Say Y here to include support for Ensoniq SoundScape
+ and Ensoniq OEM soundcards.
+
+ The PCM audio is supported on SoundScape Classic, Elite, PnP
+ and VIVO cards. The supported OEM cards are SPEA Media FX and
+ Reveal SC-600.
+ The MIDI support is very experimental and requires binary
+ firmware files called "scope.cod" and "sndscape.co?" where the
+ ? is digit 0, 1, 2, 3 or 4. The firmware files can be found
+ in DOS or Windows driver packages. One has to put the firmware
+ files into the /lib/firmware directory.
To compile this driver as a module, choose M here: the module
will be called snd-sscape.
config SND_WAVEFRONT
tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
- depends on SND
select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
- select SND_CS4231_LIB
+ select SND_WSS_LIB
help
Say Y here to include support for Turtle Beach Maui, Tropez
and Tropez+ soundcards based on the Wavefront chip.
To compile this driver as a module, choose M here: the module
will be called snd-wavefront.
-config SND_WAVEFRONT_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for Wavefront"
- depends on SND_WAVEFRONT
- default y
+config SND_MSND_PINNACLE
+ tristate "Turtle Beach MultiSound Pinnacle/Fiji driver"
+ depends on X86 && EXPERIMENTAL
+ select FW_LOADER
+ select SND_MPU401_UART
+ select SND_PCM
+ help
+ Say Y to include support for Turtle Beach MultiSound Pinnacle/
+ Fiji soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-msnd-pinnacle.
+
+config SND_MSND_CLASSIC
+ tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
+ depends on X86 && EXPERIMENTAL
+ select FW_LOADER
+ select SND_MPU401_UART
+ select SND_PCM
help
- Say Y here to include the static firmware for FX DSP built in
- the kernel for the Wavefront driver. If you choose N here,
- you need to install the firmware files from the
- alsa-firmware package.
+ Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
+ Monterey (not for the Pinnacle or Fiji).
+
+ See <file:Documentation/sound/oss/MultiSound> for important information
+ about this driver. Note that it has been discontinued, but the
+ Voyetra Turtle Beach knowledge base entry for it is still available
+ at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-msnd-classic.
+
+endif # SND_ISA
-endmenu