/* A lexical scanner generated by flex */
+#define yy_create_buffer zconf_create_buffer
+#define yy_delete_buffer zconf_delete_buffer
+#define yy_flex_debug zconf_flex_debug
+#define yy_init_buffer zconf_init_buffer
+#define yy_flush_buffer zconf_flush_buffer
+#define yy_load_buffer_state zconf_load_buffer_state
+#define yy_switch_to_buffer zconf_switch_to_buffer
+#define yyin zconfin
+#define yyleng zconfleng
+#define yylex zconflex
+#define yylineno zconflineno
+#define yyout zconfout
+#define yyrestart zconfrestart
+#define yytext zconftext
+#define yywrap zconfwrap
+#define yyalloc zconfalloc
+#define yyrealloc zconfrealloc
+#define yyfree zconffree
+
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 31
+#define YY_FLEX_SUBMINOR_VERSION 35
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif
/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-#if defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+
+/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
+ * if you want the limit (max/min) macros for int types.
+ */
+#ifndef __STDC_LIMIT_MACROS
+#define __STDC_LIMIT_MACROS 1
+#endif
+
#include <inttypes.h>
typedef int8_t flex_int8_t;
typedef uint8_t flex_uint8_t;
typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
/* Limits of integral types. */
#ifndef INT8_MIN
#define UINT32_MAX (4294967295U)
#endif
+#endif /* ! C99 */
+
#endif /* ! FLEXINT_H */
#ifdef __cplusplus
#else /* ! __cplusplus */
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
#define YY_USE_CONST
-#endif /* __STDC__ */
+#endif /* defined (__STDC__) */
#endif /* ! __cplusplus */
#ifdef YY_USE_CONST
/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k.
+ * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
+ * Ditto for the __ia64__ case accordingly.
+ */
+#define YY_BUF_SIZE 32768
+#else
#define YY_BUF_SIZE 16384
+#endif /* __ia64__ */
#endif
+/* The state buf must be large enough to hold one state per character in the main buffer.
+ */
+#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
+
#ifndef YY_TYPEDEF_YY_BUFFER_STATE
#define YY_TYPEDEF_YY_BUFFER_STATE
typedef struct yy_buffer_state *YY_BUFFER_STATE;
#define unput(c) yyunput( c, (yytext_ptr) )
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-
#ifndef YY_TYPEDEF_YY_SIZE_T
#define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
#endif
#ifndef YY_STRUCT_YY_BUFFER_STATE
/* Points to current character in buffer. */
static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 1; /* whether we need to initialize */
+static int yy_init = 0; /* whether we need to initialize */
static int yy_start = 0; /* start state number */
/* Flag which is used to allow zconfwrap()'s to do buffer switches
/* Begin user sect3 */
-#define zconfwrap() 1
+#define zconfwrap(n) 1
#define YY_SKIP_YYWRAP
typedef unsigned char YY_CHAR;
#define YY_MORE_ADJ 0
#define YY_RESTORE_YY_MORE_OFFSET
char *zconftext;
+#define YY_NO_INPUT 1
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
static void zconf_endhelp(void);
static void zconf_endfile(void);
-void new_string(void)
+static void new_string(void)
{
text = malloc(START_STRSIZE);
text_asize = START_STRSIZE;
*text = 0;
}
-void append_string(const char *str, int size)
+static void append_string(const char *str, int size)
{
int new_size = text_size + size + 1;
if (new_size > text_asize) {
text[text_size] = 0;
}
-void alloc_string(const char *str, int size)
+static void alloc_string(const char *str, int size)
{
text = malloc(size + 1);
memcpy(text, str, size);
#define YY_EXTRA_TYPE void *
#endif
+static int yy_init_globals (void );
+
+/* Accessor methods to globals.
+ These are made visible to non-reentrant scanners for convenience. */
+
+int zconflex_destroy (void );
+
+int zconfget_debug (void );
+
+void zconfset_debug (int debug_flag );
+
+YY_EXTRA_TYPE zconfget_extra (void );
+
+void zconfset_extra (YY_EXTRA_TYPE user_defined );
+
+FILE *zconfget_in (void );
+
+void zconfset_in (FILE * in_str );
+
+FILE *zconfget_out (void );
+
+void zconfset_out (FILE * out_str );
+
+int zconfget_leng (void );
+
+char *zconfget_text (void );
+
+int zconfget_lineno (void );
+
+void zconfset_lineno (int line_number );
+
/* Macros after this point can all be overridden by user definitions in
* section 1.
*/
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k */
+#define YY_READ_BUF_SIZE 16384
+#else
#define YY_READ_BUF_SIZE 8192
+#endif /* __ia64__ */
#endif
/* Copy whatever the last rule matched to the standard output. */
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
-#define ECHO (void) fwrite( zconftext, zconfleng, 1, zconfout )
+#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0)
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
int str = 0;
int ts, i;
- if ( (yy_init) )
+ if ( !(yy_init) )
{
- (yy_init) = 0;
+ (yy_init) = 1;
#ifdef YY_USER_INIT
YY_USER_INIT;
case 32:
YY_RULE_SETUP
{
+ while (zconfleng) {
+ if ((zconftext[zconfleng-1] != ' ') && (zconftext[zconfleng-1] != '\t'))
+ break;
+ zconfleng--;
+ }
append_string(zconftext, zconfleng);
if (!first_ts)
first_ts = last_ts;
else
{
- size_t num_to_read =
+ int num_to_read =
YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
while ( num_to_read <= 0 )
/* Read in more data. */
YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), num_to_read );
+ (yy_n_chars), (size_t) num_to_read );
YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
}
else
ret_val = EOB_ACT_CONTINUE_SCAN;
+ if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+ /* Extend the array by 50%, plus the number we really need. */
+ yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
+ if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+ }
+
(yy_n_chars) += number_to_move;
YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
(yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
(num_to_alloc * sizeof(struct yy_buffer_state*)
);
-
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
+
memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
(yy_buffer_stack_max) = num_to_alloc;
((yy_buffer_stack),
num_to_alloc * sizeof(struct yy_buffer_state*)
);
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
/* zero only the new slots.*/
memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
/** Setup the input buffer state to scan a string. The next call to zconflex() will
* scan from a @e copy of @a str.
- * @param yy_str a NUL-terminated string to scan
+ * @param yystr a NUL-terminated string to scan
*
* @return the newly allocated buffer state object.
* @note If you want to scan bytes that may contain NUL values, then use
* zconf_scan_bytes() instead.
*/
-YY_BUFFER_STATE zconf_scan_string (yyconst char * yy_str )
+YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr )
{
- return zconf_scan_bytes(yy_str,strlen(yy_str) );
+ return zconf_scan_bytes(yystr,strlen(yystr) );
}
/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will
* scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
+ * @param yybytes the byte buffer to scan
+ * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
*
* @return the newly allocated buffer state object.
*/
-YY_BUFFER_STATE zconf_scan_bytes (yyconst char * bytes, int len )
+YY_BUFFER_STATE zconf_scan_bytes (yyconst char * yybytes, int _yybytes_len )
{
YY_BUFFER_STATE b;
char *buf;
int i;
/* Get memory for full buffer, including space for trailing EOB's. */
- n = len + 2;
+ n = _yybytes_len + 2;
buf = (char *) zconfalloc(n );
if ( ! buf )
YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_bytes()" );
- for ( i = 0; i < len; ++i )
- buf[i] = bytes[i];
+ for ( i = 0; i < _yybytes_len; ++i )
+ buf[i] = yybytes[i];
- buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
+ buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
b = zconf_scan_buffer(buf,n );
if ( ! b )
zconf_flex_debug = bdebug ;
}
+static int yy_init_globals (void)
+{
+ /* Initialization is the same as for the non-reentrant scanner.
+ * This function is called from zconflex_destroy(), so don't allocate here.
+ */
+
+ (yy_buffer_stack) = 0;
+ (yy_buffer_stack_top) = 0;
+ (yy_buffer_stack_max) = 0;
+ (yy_c_buf_p) = (char *) 0;
+ (yy_init) = 0;
+ (yy_start) = 0;
+
+/* Defined in main.c */
+#ifdef YY_STDINIT
+ zconfin = stdin;
+ zconfout = stdout;
+#else
+ zconfin = (FILE *) 0;
+ zconfout = (FILE *) 0;
+#endif
+
+ /* For future reference: Set errno on error, since we are called by
+ * zconflex_init()
+ */
+ return 0;
+}
+
/* zconflex_destroy is for both reentrant and non-reentrant scanners. */
int zconflex_destroy (void)
{
zconffree((yy_buffer_stack) );
(yy_buffer_stack) = NULL;
+ /* Reset the globals. This is important in a non-reentrant scanner so the next time
+ * zconflex() is called, initialization will occur. */
+ yy_init_globals( );
+
return 0;
}
static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
{
register int i;
- for ( i = 0; i < n; ++i )
+ for ( i = 0; i < n; ++i )
s1[i] = s2[i];
}
#endif
static int yy_flex_strlen (yyconst char * s )
{
register int n;
- for ( n = 0; s[n]; ++n )
+ for ( n = 0; s[n]; ++n )
;
return n;
#define YYTABLES_NAME "yytables"
-#undef YY_NEW_FILE
-#undef YY_FLUSH_BUFFER
-#undef yy_set_bol
-#undef yy_new_buffer
-#undef yy_set_interactive
-#undef yytext_ptr
-#undef YY_DO_BEFORE_ACTION
-
-#ifdef YY_DECL_IS_OURS
-#undef YY_DECL_IS_OURS
-#undef YY_DECL
-#endif
-
void zconf_starthelp(void)
{
new_string();
FILE *f;
f = fopen(name, "r");
- if (!f && name[0] != '/') {
+ if (!f && name != NULL && name[0] != '/') {
env = getenv(SRCTREE);
if (env) {
sprintf(fullname, "%s/%s", env, name);
current_buf = buf;
if (file->flags & FILE_BUSY) {
- printf("recursive scan (%s)?\n", name);
+ printf("%s:%d: do not source '%s' from itself\n",
+ zconf_curname(), zconf_lineno(), name);
exit(1);
}
if (file->flags & FILE_SCANNED) {
- printf("file %s already scanned?\n", name);
+ printf("%s:%d: file '%s' is already sourced from '%s'\n",
+ zconf_curname(), zconf_lineno(), name,
+ file->parent->name);
exit(1);
}
file->flags |= FILE_BUSY;