static atomic_t sctp_memory_allocated;
static atomic_t sctp_sockets_allocated;
-static void sctp_enter_memory_pressure(void)
+static void sctp_enter_memory_pressure(struct sock *sk)
{
sctp_memory_pressure = 1;
}
*/
static int __sctp_connect(struct sock* sk,
struct sockaddr *kaddrs,
- int addrs_size)
+ int addrs_size,
+ sctp_assoc_t *assoc_id)
{
struct sctp_sock *sp;
struct sctp_endpoint *ep;
timeo = sock_sndtimeo(sk, f_flags & O_NONBLOCK);
err = sctp_wait_for_connect(asoc, &timeo);
+ if (!err && assoc_id)
+ *assoc_id = asoc->assoc_id;
/* Don't free association on exit. */
asoc = NULL;
/* Helper for tunneling sctp_connectx() requests through sctp_setsockopt()
*
* API 8.9
- * int sctp_connectx(int sd, struct sockaddr *addrs, int addrcnt);
+ * int sctp_connectx(int sd, struct sockaddr *addrs, int addrcnt,
+ * sctp_assoc_t *asoc);
*
* If sd is an IPv4 socket, the addresses passed must be IPv4 addresses.
* If the sd is an IPv6 socket, the addresses passed can either be IPv4
* representation is termed a "packed array" of addresses). The caller
* specifies the number of addresses in the array with addrcnt.
*
- * On success, sctp_connectx() returns 0. On failure, sctp_connectx() returns
- * -1, and sets errno to the appropriate error code.
+ * On success, sctp_connectx() returns 0. It also sets the assoc_id to
+ * the association id of the new association. On failure, sctp_connectx()
+ * returns -1, and sets errno to the appropriate error code. The assoc_id
+ * is not touched by the kernel.
*
* For SCTP, the port given in each socket address must be the same, or
* sctp_connectx() will fail, setting errno to EINVAL.
* addrs The pointer to the addresses in user land
* addrssize Size of the addrs buffer
*
- * Returns 0 if ok, <0 errno code on error.
+ * Returns >=0 if ok, <0 errno code on error.
*/
-SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk,
+SCTP_STATIC int __sctp_setsockopt_connectx(struct sock* sk,
struct sockaddr __user *addrs,
- int addrs_size)
+ int addrs_size,
+ sctp_assoc_t *assoc_id)
{
int err = 0;
struct sockaddr *kaddrs;
if (__copy_from_user(kaddrs, addrs, addrs_size)) {
err = -EFAULT;
} else {
- err = __sctp_connect(sk, kaddrs, addrs_size);
+ err = __sctp_connect(sk, kaddrs, addrs_size, assoc_id);
}
kfree(kaddrs);
+
return err;
}
+/*
+ * This is an older interface. It's kept for backward compatibility
+ * to the option that doesn't provide association id.
+ */
+SCTP_STATIC int sctp_setsockopt_connectx_old(struct sock* sk,
+ struct sockaddr __user *addrs,
+ int addrs_size)
+{
+ return __sctp_setsockopt_connectx(sk, addrs, addrs_size, NULL);
+}
+
+/*
+ * New interface for the API. The since the API is done with a socket
+ * option, to make it simple we feed back the association id is as a return
+ * indication to the call. Error is always negative and association id is
+ * always positive.
+ */
+SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk,
+ struct sockaddr __user *addrs,
+ int addrs_size)
+{
+ sctp_assoc_t assoc_id = 0;
+ int err = 0;
+
+ err = __sctp_setsockopt_connectx(sk, addrs, addrs_size, &assoc_id);
+
+ if (err)
+ return err;
+ else
+ return assoc_id;
+}
+
/* API 3.1.4 close() - UDP Style Syntax
* Applications use close() to perform graceful shutdown (as described in
* Section 10.1 of [SCTP]) on ALL the associations currently represented
(trans->param_flags & ~SPP_SACKDELAY) |
SPP_SACKDELAY_ENABLE;
}
- if (params.sack_delay == 1) {
+ if (params.sack_freq == 1) {
trans->param_flags =
(trans->param_flags & ~SPP_SACKDELAY) |
SPP_SACKDELAY_DISABLE;
optlen, SCTP_BINDX_REM_ADDR);
break;
+ case SCTP_SOCKOPT_CONNECTX_OLD:
+ /* 'optlen' is the size of the addresses buffer. */
+ retval = sctp_setsockopt_connectx_old(sk,
+ (struct sockaddr __user *)optval,
+ optlen);
+ break;
+
case SCTP_SOCKOPT_CONNECTX:
/* 'optlen' is the size of the addresses buffer. */
- retval = sctp_setsockopt_connectx(sk, (struct sockaddr __user *)optval,
- optlen);
+ retval = sctp_setsockopt_connectx(sk,
+ (struct sockaddr __user *)optval,
+ optlen);
break;
case SCTP_DISABLE_FRAGMENTS:
/* Pass correct addr len to common routine (so it knows there
* is only one address being passed.
*/
- err = __sctp_connect(sk, addr, af->sockaddr_len);
+ err = __sctp_connect(sk, addr, af->sockaddr_len, NULL);
}
sctp_release_sock(sk);
sp->pathmaxrxt = sctp_max_retrans_path;
sp->pathmtu = 0; // allow default discovery
sp->sackdelay = sctp_sack_timeout;
- sp->sackfreq = 3;
+ sp->sackfreq = 2;
sp->param_flags = SPP_HB_ENABLE |
SPP_PMTUD_ENABLE |
SPP_SACKDELAY_ENABLE;
}
/* Cleanup any SCTP per socket resources. */
-SCTP_STATIC int sctp_destroy_sock(struct sock *sk)
+SCTP_STATIC void sctp_destroy_sock(struct sock *sk)
{
struct sctp_endpoint *ep;
ep = sctp_sk(sk)->ep;
sctp_endpoint_free(ep);
atomic_dec(&sctp_sockets_allocated);
- return 0;
}
/* API 4.1.7 shutdown() - TCP Style Syntax
if (copy_from_user(&id, optval, sizeof(sctp_assoc_t)))
return -EFAULT;
+ printk(KERN_WARNING "SCTP: Use of SCTP_GET_PEER_ADDRS_NUM_OLD "
+ "socket option deprecated\n");
/* For UDP-style sockets, id specifies the association to query. */
asoc = sctp_id2assoc(sk, id);
if (!asoc)
if (getaddrs.addr_num <= 0) return -EINVAL;
+ printk(KERN_WARNING "SCTP: Use of SCTP_GET_PEER_ADDRS_OLD "
+ "socket option deprecated\n");
+
/* For UDP-style sockets, id specifies the association to query. */
asoc = sctp_id2assoc(sk, getaddrs.assoc_id);
if (!asoc)
if (copy_from_user(&id, optval, sizeof(sctp_assoc_t)))
return -EFAULT;
+ printk(KERN_WARNING "SCTP: Use of SCTP_GET_LOCAL_ADDRS_NUM_OLD "
+ "socket option deprecated\n");
+
/*
* For UDP-style sockets, id specifies the association to query.
* If the id field is set to the value '0' then the locally bound
if (copy_from_user(&getaddrs, optval, len))
return -EFAULT;
- if (getaddrs.addr_num <= 0) return -EINVAL;
+ if (getaddrs.addr_num <= 0 ||
+ getaddrs.addr_num >= (INT_MAX / sizeof(union sctp_addr)))
+ return -EINVAL;
+
+ printk(KERN_WARNING "SCTP: Use of SCTP_GET_LOCAL_ADDRS_OLD "
+ "socket option deprecated\n");
+
/*
* For UDP-style sockets, id specifies the association to query.
* If the id field is set to the value '0' then the locally bound
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff